Spec-Zone .ru
спецификации, руководства, описания, API
Spec-Zone .ru
спецификации, руководства, описания, API
Библиотека разработчика Mac Разработчик
Поиск

 

Эта страница руководства для  версии 10.9 Mac OS X

Если Вы выполняете различную версию  Mac OS X, просматриваете документацию локально:

Читать страницы руководства

Страницы руководства предназначаются как справочник для людей, уже понимающих технологию.

  • Чтобы изучить, как руководство организовано или узнать о синтаксисе команды, прочитайте страницу руководства для страниц справочника (5).

  • Для получения дополнительной информации об этой технологии, ищите другую документацию в Библиотеке Разработчика Apple.

  • Для получения общей информации о записи сценариев оболочки, считайте Shell, Пишущий сценарий Учебника для начинающих.



IO::Uncompress::Bunzip2(3pm)          Perl Programmers Reference Guide          IO::Uncompress::Bunzip2(3pm)



NAME
       IO::Uncompress::Bunzip2 - Read bzip2 files/buffers

SYNOPSIS
           use IO::Uncompress::Bunzip2 qw(bunzip2 $Bunzip2Error) ;

           my $status = bunzip2 $input => $output [,OPTS]
               or die "bunzip2 failed: $Bunzip2Error\n";

           my $z = new IO::Uncompress::Bunzip2 $input [OPTS]
               or die "bunzip2 failed: $Bunzip2Error\n";

           $status = $z->read($buffer)
           $status = $z->read($buffer, $length)
           $status = $z->read($buffer, $length, $offset)
           $line = $z->getline()
           $char = $z->getc()
           $char = $z->ungetc()
           $char = $z->opened()

           $data = $z->trailingData()
           $status = $z->nextStream()
           $data = $z->getHeaderInfo()
           $z->tell()
           $z->seek($position, $whence)
           $z->binmode()
           $z->fileno()
           $z->eof()
           $z->close()

           $Bunzip2Error ;

           # IO::File mode

           <$z>
           read($z, $buffer);
           read($z, $buffer, $length);
           read($z, $buffer, $length, $offset);
           tell($z)
           seek($z, $position, $whence)
           binmode($z)
           fileno($z)
           eof($z)
           close($z)

DESCRIPTION
       This module provides a Perl interface that allows the reading of bzip2 files/buffers.

       For writing bzip2 files/buffers, see the companion module IO::Compress::Bzip2.

Functional Interface
       A top-level function, "bunzip2", is provided to carry out "one-shot" uncompression between buffers
       and/or files. For finer control over the uncompression process, see the "OO Interface" section.

           use IO::Uncompress::Bunzip2 qw(bunzip2 $Bunzip2Error) ;

           bunzip2 $input => $output [,OPTS]
               or die "bunzip2 failed: $Bunzip2Error\n";

       The functional interface needs Perl5.005 or better.

   bunzip2 $input => $output [, OPTS]
       "bunzip2" expects at least two parameters, $input and $output.

       The $input parameter

       The parameter, $input, is used to define the source of the compressed data.

       It can take one of the following forms:

       A filename
            If the $input parameter is a simple scalar, it is assumed to be a filename. This file will be
            opened for reading and the input data will be read from it.

       A filehandle
            If the $input parameter is a filehandle, the input data will be read from it.  The string '-'
            can be used as an alias for standard input.

       A scalar reference
            If $input is a scalar reference, the input data will be read from $$input.

       An array reference
            If $input is an array reference, each element in the array must be a filename.

            The input data will be read from each file in turn.

            The complete array will be walked to ensure that it only contains valid filenames before any
            data is uncompressed.

       An Input FileGlob string
            If $input is a string that is delimited by the characters "<" and ">" "bunzip2" will assume that
            it is an input fileglob string. The input is the list of files that match the fileglob.

            If the fileglob does not match any files ...

            See File::GlobMapper for more details.

       If the $input parameter is any other type, "undef" will be returned.

       The $output parameter

       The parameter $output is used to control the destination of the uncompressed data. This parameter can
       take one of these forms.

       A filename
            If the $output parameter is a simple scalar, it is assumed to be a filename.  This file will be
            opened for writing and the uncompressed data will be written to it.

       A filehandle
            If the $output parameter is a filehandle, the uncompressed data will be written to it.  The
            string '-' can be used as an alias for standard output.

       A scalar reference
            If $output is a scalar reference, the uncompressed data will be stored in $$output.

       An Array Reference
            If $output is an array reference, the uncompressed data will be pushed onto the array.

       An Output FileGlob
            If $output is a string that is delimited by the characters "<" and ">" "bunzip2" will assume
            that it is an output fileglob string. The output is the list of files that match the fileglob.

            When $output is an fileglob string, $input must also be a fileglob string. Anything else is an
            error.

       If the $output parameter is any other type, "undef" will be returned.

   Notes
       When $input maps to multiple compressed files/buffers and $output is a single file/buffer, after
       uncompression $output will contain a concatenation of all the uncompressed data from each of the
       input files/buffers.

   Optional Parameters
       Unless specified below, the optional parameters for "bunzip2", "OPTS", are the same as those used
       with the OO interface defined in the "Constructor Options" section below.

       "AutoClose => 0|1"
            This option applies to any input or output data streams to "bunzip2" that are filehandles.

            If "AutoClose" is specified, and the value is true, it will result in all input and/or output
            filehandles being closed once "bunzip2" has completed.

            This parameter defaults to 0.

       "BinModeOut => 0|1"
            When writing to a file or filehandle, set "binmode" before writing to the file.

            Defaults to 0.

       "Append => 0|1"
            TODO

       "MultiStream => 0|1"
            If the input file/buffer contains multiple compressed data streams, this option will uncompress
            the whole lot as a single data stream.

            Defaults to 0.

       "TrailingData => $scalar"
            Returns the data, if any, that is present immediately after the compressed data stream once
            uncompression is complete.

            This option can be used when there is useful information immediately following the compressed
            data stream, and you don't know the length of the compressed data stream.

            If the input is a buffer, "trailingData" will return everything from the end of the compressed
            data stream to the end of the buffer.

            If the input is a filehandle, "trailingData" will return the data that is left in the filehandle
            input buffer once the end of the compressed data stream has been reached. You can then use the
            filehandle to read the rest of the input file.

            Don't bother using "trailingData" if the input is a filename.

            If you know the length of the compressed data stream before you start uncompressing, you can
            avoid having to use "trailingData" by setting the "InputLength" option.

   Examples
       To read the contents of the file "file1.txt.bz2" and write the compressed data to the file
       "file1.txt".

           use strict ;
           use warnings ;
           use IO::Uncompress::Bunzip2 qw(bunzip2 $Bunzip2Error) ;

           my $input = "file1.txt.bz2";
           my $output = "file1.txt";
           bunzip2 $input => $output
               or die "bunzip2 failed: $Bunzip2Error\n";

       To read from an existing Perl filehandle, $input, and write the uncompressed data to a buffer,
       $buffer.

           use strict ;
           use warnings ;
           use IO::Uncompress::Bunzip2 qw(bunzip2 $Bunzip2Error) ;
           use IO::File ;

           my $input = new IO::File "<file1.txt.bz2"
               or die "Cannot open 'file1.txt.bz2': $!\n" ;
           my $buffer ;
           bunzip2 $input => \$buffer
               or die "bunzip2 failed: $Bunzip2Error\n";

       To uncompress all files in the directory "/my/home" that match "*.txt.bz2" and store the compressed
       data in the same directory

           use strict ;
           use warnings ;
           use IO::Uncompress::Bunzip2 qw(bunzip2 $Bunzip2Error) ;

           bunzip2 '</my/home/*.txt.bz2>' => '</my/home/#1.txt>'
               or die "bunzip2 failed: $Bunzip2Error\n";

       and if you want to compress each file one at a time, this will do the trick

           use strict ;
           use warnings ;
           use IO::Uncompress::Bunzip2 qw(bunzip2 $Bunzip2Error) ;

           for my $input ( glob "/my/home/*.txt.bz2" )
           {
               my $output = $input;
               $output =~ s/.bz2// ;
               bunzip2 $input => $output
                   or die "Error compressing '$input': $Bunzip2Error\n";
           }

OO Interface
   Constructor
       The format of the constructor for IO::Uncompress::Bunzip2 is shown below

           my $z = new IO::Uncompress::Bunzip2 $input [OPTS]
               or die "IO::Uncompress::Bunzip2 failed: $Bunzip2Error\n";

       Returns an "IO::Uncompress::Bunzip2" object on success and undef on failure.  The variable
       $Bunzip2Error will contain an error message on failure.

       If you are running Perl 5.005 or better the object, $z, returned from IO::Uncompress::Bunzip2 can be
       used exactly like an IO::File filehandle.  This means that all normal input file operations can be
       carried out with $z.  For example, to read a line from a compressed file/buffer you can use either of
       these forms

           $line = $z->getline();
           $line = <$z>;

       The mandatory parameter $input is used to determine the source of the compressed data. This parameter
       can take one of three forms.

       A filename
            If the $input parameter is a scalar, it is assumed to be a filename. This file will be opened
            for reading and the compressed data will be read from it.

       A filehandle
            If the $input parameter is a filehandle, the compressed data will be read from it.  The string
            '-' can be used as an alias for standard input.

       A scalar reference
            If $input is a scalar reference, the compressed data will be read from $$output.

   Constructor Options
       The option names defined below are case insensitive and can be optionally prefixed by a '-'.  So all
       of the following are valid

           -AutoClose
           -autoclose
           AUTOCLOSE
           autoclose

       OPTS is a combination of the following options:

       "AutoClose => 0|1"
            This option is only valid when the $input parameter is a filehandle. If specified, and the value
            is true, it will result in the file being closed once either the "close" method is called or the
            IO::Uncompress::Bunzip2 object is destroyed.

            This parameter defaults to 0.

       "MultiStream => 0|1"
            Allows multiple concatenated compressed streams to be treated as a single compressed stream.
            Decompression will stop once either the end of the file/buffer is reached, an error is
            encountered (premature eof, corrupt compressed data) or the end of a stream is not immediately
            followed by the start of another stream.

            This parameter defaults to 0.

       "Prime => $string"
            This option will uncompress the contents of $string before processing the input file/buffer.

            This option can be useful when the compressed data is embedded in another file/data structure
            and it is not possible to work out where the compressed data begins without having to read the
            first few bytes. If this is the case, the uncompression can be primed with these bytes using
            this option.

       "Transparent => 0|1"
            If this option is set and the input file/buffer is not compressed data, the module will allow
            reading of it anyway.

            In addition, if the input file/buffer does contain compressed data and there is non-compressed
            data immediately following it, setting this option will make this module treat the whole
            file/bufffer as a single data stream.

            This option defaults to 1.

       "BlockSize => $num"
            When reading the compressed input data, IO::Uncompress::Bunzip2 will read it in blocks of $num
            bytes.

            This option defaults to 4096.

       "InputLength => $size"
            When present this option will limit the number of compressed bytes read from the input
            file/buffer to $size. This option can be used in the situation where there is useful data
            directly after the compressed data stream and you know beforehand the exact length of the
            compressed data stream.

            This option is mostly used when reading from a filehandle, in which case the file pointer will
            be left pointing to the first byte directly after the compressed data stream.

            This option defaults to off.

       "Append => 0|1"
            This option controls what the "read" method does with uncompressed data.

            If set to 1, all uncompressed data will be appended to the output parameter of the "read"
            method.

            If set to 0, the contents of the output parameter of the "read" method will be overwritten by
            the uncompressed data.

            Defaults to 0.

       "Strict => 0|1"
            This option is a no-op.

       "Small => 0|1"
            When non-zero this options will make bzip2 use a decompression algorithm that uses less memory
            at the expense of increasing the amount of time taken for decompression.

            Default is 0.

   Examples
       TODO

Methods
   read
       Usage is

           $status = $z->read($buffer)

       Reads a block of compressed data (the size the the compressed block is determined by the "Buffer"
       option in the constructor), uncompresses it and writes any uncompressed data into $buffer. If the
       "Append" parameter is set in the constructor, the uncompressed data will be appended to the $buffer
       parameter. Otherwise $buffer will be overwritten.

       Returns the number of uncompressed bytes written to $buffer, zero if eof or a negative number on
       error.

   read
       Usage is

           $status = $z->read($buffer, $length)
           $status = $z->read($buffer, $length, $offset)

           $status = read($z, $buffer, $length)
           $status = read($z, $buffer, $length, $offset)

       Attempt to read $length bytes of uncompressed data into $buffer.

       The main difference between this form of the "read" method and the previous one, is that this one
       will attempt to return exactly $length bytes. The only circumstances that this function will not is
       if end-of-file or an IO error is encountered.

       Returns the number of uncompressed bytes written to $buffer, zero if eof or a negative number on
       error.

   getline
       Usage is

           $line = $z->getline()
           $line = <$z>

       Reads a single line.

       This method fully supports the use of of the variable $/ (or $INPUT_RECORD_SEPARATOR or $RS when
       "English" is in use) to determine what constitutes an end of line. Paragraph mode, record mode and
       file slurp mode are all supported.

   getc
       Usage is

           $char = $z->getc()

       Read a single character.

   ungetc
       Usage is

           $char = $z->ungetc($string)

   getHeaderInfo
       Usage is

           $hdr  = $z->getHeaderInfo();
           @hdrs = $z->getHeaderInfo();

       This method returns either a hash reference (in scalar context) or a list or hash references (in
       array context) that contains information about each of the header fields in the compressed data
       stream(s).

   tell
       Usage is

           $z->tell()
           tell $z

       Returns the uncompressed file offset.

   eof
       Usage is

           $z->eof();
           eof($z);

       Returns true if the end of the compressed input stream has been reached.

   seek
           $z->seek($position, $whence);
           seek($z, $position, $whence);

       Provides a sub-set of the "seek" functionality, with the restriction that it is only legal to seek
       forward in the input file/buffer.  It is a fatal error to attempt to seek backward.

       The $whence parameter takes one the usual values, namely SEEK_SET, SEEK_CUR or SEEK_END.

       Returns 1 on success, 0 on failure.

   binmode
       Usage is

           $z->binmode
           binmode $z ;

       This is a noop provided for completeness.

   opened
           $z->opened()

       Returns true if the object currently refers to a opened file/buffer.

   autoflush
           my $prev = $z->autoflush()
           my $prev = $z->autoflush(EXPR)

       If the $z object is associated with a file or a filehandle, this method returns the current autoflush
       setting for the underlying filehandle. If "EXPR" is present, and is non-zero, it will enable flushing
       after every write/print operation.

       If $z is associated with a buffer, this method has no effect and always returns "undef".

       Note that the special variable $| cannot be used to set or retrieve the autoflush setting.

   input_line_number
           $z->input_line_number()
           $z->input_line_number(EXPR)

       Returns the current uncompressed line number. If "EXPR" is present it has the effect of setting the
       line number. Note that setting the line number does not change the current position within the
       file/buffer being read.

       The contents of $/ are used to to determine what constitutes a line terminator.

   fileno
           $z->fileno()
           fileno($z)

       If the $z object is associated with a file or a filehandle, "fileno" will return the underlying file
       descriptor. Once the "close" method is called "fileno" will return "undef".

       If the $z object is is associated with a buffer, this method will return "undef".

   close
           $z->close() ;
           close $z ;

       Closes the output file/buffer.

       For most versions of Perl this method will be automatically invoked if the IO::Uncompress::Bunzip2
       object is destroyed (either explicitly or by the variable with the reference to the object going out
       of scope). The exceptions are Perl versions 5.005 through 5.00504 and 5.8.0. In these cases, the
       "close" method will be called automatically, but not until global destruction of all live objects
       when the program is terminating.

       Therefore, if you want your scripts to be able to run on all versions of Perl, you should call
       "close" explicitly and not rely on automatic closing.

       Returns true on success, otherwise 0.

       If the "AutoClose" option has been enabled when the IO::Uncompress::Bunzip2 object was created, and
       the object is associated with a file, the underlying file will also be closed.

   nextStream
       Usage is

           my $status = $z->nextStream();

       Skips to the next compressed data stream in the input file/buffer. If a new compressed data stream is
       found, the eof marker will be cleared and $.  will be reset to 0.

       Returns 1 if a new stream was found, 0 if none was found, and -1 if an error was encountered.

   trailingData
       Usage is

           my $data = $z->trailingData();

       Returns the data, if any, that is present immediately after the compressed data stream once
       uncompression is complete. It only makes sense to call this method once the end of the compressed
       data stream has been encountered.

       This option can be used when there is useful information immediately following the compressed data
       stream, and you don't know the length of the compressed data stream.

       If the input is a buffer, "trailingData" will return everything from the end of the compressed data
       stream to the end of the buffer.

       If the input is a filehandle, "trailingData" will return the data that is left in the filehandle
       input buffer once the end of the compressed data stream has been reached. You can then use the
       filehandle to read the rest of the input file.

       Don't bother using "trailingData" if the input is a filename.

       If you know the length of the compressed data stream before you start uncompressing, you can avoid
       having to use "trailingData" by setting the "InputLength" option in the constructor.

Importing
       No symbolic constants are required by this IO::Uncompress::Bunzip2 at present.

       :all Imports "bunzip2" and $Bunzip2Error.  Same as doing this

                use IO::Uncompress::Bunzip2 qw(bunzip2 $Bunzip2Error) ;

EXAMPLES
   Working with Net::FTP
       See IO::Uncompress::Bunzip2::FAQ

SEE ALSO
       Compress::Zlib, IO::Compress::Gzip, IO::Uncompress::Gunzip, IO::Compress::Deflate,
       IO::Uncompress::Inflate, IO::Compress::RawDeflate, IO::Uncompress::RawInflate, IO::Compress::Bzip2,
       IO::Compress::Lzop, IO::Uncompress::UnLzop, IO::Compress::Lzf, IO::Uncompress::UnLzf,
       IO::Uncompress::AnyInflate, IO::Uncompress::AnyUncompress

       Compress::Zlib::FAQ

       File::GlobMapper, Archive::Zip, Archive::Tar, IO::Zlib

       The primary site for the bzip2 program is http://www.bzip.org.

       See the module Compress::Bzip2

AUTHOR
       This module was written by Paul Marquess, pmqs@cpan.org.

MODIFICATION HISTORY
       See the Changes file.

COPYRIGHT AND LICENSE
       Copyright (c) 2005-2008 Paul Marquess. All rights reserved.

       This program is free software; you can redistribute it and/or modify it under the same terms as Perl
       itself.



perl v5.16.2                                     2012-10-25                     IO::Uncompress::Bunzip2(3pm)

Сообщение о проблемах

Способ сообщить о проблеме с этой страницей руководства зависит от типа проблемы:

Ошибки содержания
Ошибки отчета в содержании этой документации к проекту Perl. (См. perlbug (1) для инструкций представления.)
Отчеты об ошибках
Сообщите об ошибках в функциональности описанного инструмента или API к Apple через Генератор отчетов Ошибки и к проекту Perl, использующему perlbug (1).
Форматирование проблем
Отчет, форматирующий ошибки в интерактивной версии этих страниц со ссылками на отзыв ниже.