|
|
Эта страница руководства для версии 10.9 Mac OS XЕсли Вы выполняете различную версию Mac OS X, просматриваете документацию локально:
Читать страницы руководстваСтраницы руководства предназначаются как справочник для людей, уже понимающих технологию.
|
IO::Uncompress::RawInflate(3pm) Perl Programmers Reference Guide IO::Uncompress::RawInflate(3pm) NAME IO::Uncompress::RawInflate - Read RFC 1951 files/buffers SYNOPSIS use IO::Uncompress::RawInflate qw(rawinflate $RawInflateError) ; my $status = rawinflate $input => $output [,OPTS] or die "rawinflate failed: $RawInflateError\n"; my $z = new IO::Uncompress::RawInflate $input [OPTS] or die "rawinflate failed: $RawInflateError\n"; $status = $z->read($buffer) $status = $z->read($buffer, $length) $status = $z->read($buffer, $length, $offset) $line = $z->getline() $char = $z->getc() $char = $z->ungetc() $char = $z->opened() $status = $z->inflateSync() $data = $z->trailingData() $status = $z->nextStream() $data = $z->getHeaderInfo() $z->tell() $z->seek($position, $whence) $z->binmode() $z->fileno() $z->eof() $z->close() $RawInflateError ; # IO::File mode <$z> read($z, $buffer); read($z, $buffer, $length); read($z, $buffer, $length, $offset); tell($z) seek($z, $position, $whence) binmode($z) fileno($z) eof($z) close($z) DESCRIPTION This module provides a Perl interface that allows the reading of files/buffers that conform to RFC 1951. For writing RFC 1951 files/buffers, see the companion module IO::Compress::RawDeflate. Functional Interface A top-level function, "rawinflate", is provided to carry out "one-shot" uncompression between buffers and/or files. For finer control over the uncompression process, see the "OO Interface" section. use IO::Uncompress::RawInflate qw(rawinflate $RawInflateError) ; rawinflate $input => $output [,OPTS] or die "rawinflate failed: $RawInflateError\n"; The functional interface needs Perl5.005 or better. rawinflate $input => $output [, OPTS] "rawinflate" expects at least two parameters, $input and $output. The $input parameter The parameter, $input, is used to define the source of the compressed data. It can take one of the following forms: A filename If the $input parameter is a simple scalar, it is assumed to be a filename. This file will be opened for reading and the input data will be read from it. A filehandle If the $input parameter is a filehandle, the input data will be read from it. The string '-' can be used as an alias for standard input. A scalar reference If $input is a scalar reference, the input data will be read from $$input. An array reference If $input is an array reference, each element in the array must be a filename. The input data will be read from each file in turn. The complete array will be walked to ensure that it only contains valid filenames before any data is uncompressed. An Input FileGlob string If $input is a string that is delimited by the characters "<" and ">" "rawinflate" will assume that it is an input fileglob string. The input is the list of files that match the fileglob. See File::GlobMapper for more details. If the $input parameter is any other type, "undef" will be returned. The $output parameter The parameter $output is used to control the destination of the uncompressed data. This parameter can take one of these forms. A filename If the $output parameter is a simple scalar, it is assumed to be a filename. This file will be opened for writing and the uncompressed data will be written to it. A filehandle If the $output parameter is a filehandle, the uncompressed data will be written to it. The string '-' can be used as an alias for standard output. A scalar reference If $output is a scalar reference, the uncompressed data will be stored in $$output. An Array Reference If $output is an array reference, the uncompressed data will be pushed onto the array. An Output FileGlob If $output is a string that is delimited by the characters "<" and ">" "rawinflate" will assume that it is an output fileglob string. The output is the list of files that match the fileglob. When $output is an fileglob string, $input must also be a fileglob string. Anything else is an error. See File::GlobMapper for more details. If the $output parameter is any other type, "undef" will be returned. Notes When $input maps to multiple compressed files/buffers and $output is a single file/buffer, after uncompression $output will contain a concatenation of all the uncompressed data from each of the input files/buffers. Optional Parameters Unless specified below, the optional parameters for "rawinflate", "OPTS", are the same as those used with the OO interface defined in the "Constructor Options" section below. "AutoClose => 0|1" This option applies to any input or output data streams to "rawinflate" that are filehandles. If "AutoClose" is specified, and the value is true, it will result in all input and/or output filehandles being closed once "rawinflate" has completed. This parameter defaults to 0. "BinModeOut => 0|1" When writing to a file or filehandle, set "binmode" before writing to the file. Defaults to 0. "Append => 0|1" The behaviour of this option is dependent on the type of output data stream. • A Buffer If "Append" is enabled, all uncompressed data will be append to the end of the output buffer. Otherwise the output buffer will be cleared before any uncompressed data is written to it. • A Filename If "Append" is enabled, the file will be opened in append mode. Otherwise the contents of the file, if any, will be truncated before any uncompressed data is written to it. • A Filehandle If "Append" is enabled, the filehandle will be positioned to the end of the file via a call to "seek" before any uncompressed data is written to it. Otherwise the file pointer will not be moved. When "Append" is specified, and set to true, it will append all uncompressed data to the output data stream. So when the output is a filehandle it will carry out a seek to the eof before writing any uncompressed data. If the output is a filename, it will be opened for appending. If the output is a buffer, all uncompressed data will be appended to the existing buffer. Conversely when "Append" is not specified, or it is present and is set to false, it will operate as follows. When the output is a filename, it will truncate the contents of the file before writing any uncompressed data. If the output is a filehandle its position will not be changed. If the output is a buffer, it will be wiped before any uncompressed data is output. Defaults to 0. "MultiStream => 0|1" This option is a no-op. "TrailingData => $scalar" Returns the data, if any, that is present immediately after the compressed data stream once uncompression is complete. This option can be used when there is useful information immediately following the compressed data stream, and you don't know the length of the compressed data stream. If the input is a buffer, "trailingData" will return everything from the end of the compressed data stream to the end of the buffer. If the input is a filehandle, "trailingData" will return the data that is left in the filehandle input buffer once the end of the compressed data stream has been reached. You can then use the filehandle to read the rest of the input file. Don't bother using "trailingData" if the input is a filename. If you know the length of the compressed data stream before you start uncompressing, you can avoid having to use "trailingData" by setting the "InputLength" option. Examples To read the contents of the file "file1.txt.1951" and write the uncompressed data to the file "file1.txt". use strict ; use warnings ; use IO::Uncompress::RawInflate qw(rawinflate $RawInflateError) ; my $input = "file1.txt.1951"; my $output = "file1.txt"; rawinflate $input => $output or die "rawinflate failed: $RawInflateError\n"; To read from an existing Perl filehandle, $input, and write the uncompressed data to a buffer, $buffer. use strict ; use warnings ; use IO::Uncompress::RawInflate qw(rawinflate $RawInflateError) ; use IO::File ; my $input = new IO::File "<file1.txt.1951" or die "Cannot open 'file1.txt.1951': $!\n" ; my $buffer ; rawinflate $input => \$buffer or die "rawinflate failed: $RawInflateError\n"; To uncompress all files in the directory "/my/home" that match "*.txt.1951" and store the compressed data in the same directory use strict ; use warnings ; use IO::Uncompress::RawInflate qw(rawinflate $RawInflateError) ; rawinflate '</my/home/*.txt.1951>' => '</my/home/#1.txt>' or die "rawinflate failed: $RawInflateError\n"; and if you want to compress each file one at a time, this will do the trick use strict ; use warnings ; use IO::Uncompress::RawInflate qw(rawinflate $RawInflateError) ; for my $input ( glob "/my/home/*.txt.1951" ) { my $output = $input; $output =~ s/.1951// ; rawinflate $input => $output or die "Error compressing '$input': $RawInflateError\n"; } OO Interface Constructor The format of the constructor for IO::Uncompress::RawInflate is shown below my $z = new IO::Uncompress::RawInflate $input [OPTS] or die "IO::Uncompress::RawInflate failed: $RawInflateError\n"; Returns an "IO::Uncompress::RawInflate" object on success and undef on failure. The variable $RawInflateError will contain an error message on failure. If you are running Perl 5.005 or better the object, $z, returned from IO::Uncompress::RawInflate can be used exactly like an IO::File filehandle. This means that all normal input file operations can be carried out with $z. For example, to read a line from a compressed file/buffer you can use either of these forms $line = $z->getline(); $line = <$z>; The mandatory parameter $input is used to determine the source of the compressed data. This parameter can take one of three forms. A filename If the $input parameter is a scalar, it is assumed to be a filename. This file will be opened for reading and the compressed data will be read from it. A filehandle If the $input parameter is a filehandle, the compressed data will be read from it. The string '-' can be used as an alias for standard input. A scalar reference If $input is a scalar reference, the compressed data will be read from $$output. Constructor Options The option names defined below are case insensitive and can be optionally prefixed by a '-'. So all of the following are valid -AutoClose -autoclose AUTOCLOSE autoclose OPTS is a combination of the following options: "AutoClose => 0|1" This option is only valid when the $input parameter is a filehandle. If specified, and the value is true, it will result in the file being closed once either the "close" method is called or the IO::Uncompress::RawInflate object is destroyed. This parameter defaults to 0. "MultiStream => 0|1" Allows multiple concatenated compressed streams to be treated as a single compressed stream. Decompression will stop once either the end of the file/buffer is reached, an error is encountered (premature eof, corrupt compressed data) or the end of a stream is not immediately followed by the start of another stream. This parameter defaults to 0. "Prime => $string" This option will uncompress the contents of $string before processing the input file/buffer. This option can be useful when the compressed data is embedded in another file/data structure and it is not possible to work out where the compressed data begins without having to read the first few bytes. If this is the case, the uncompression can be primed with these bytes using this option. "Transparent => 0|1" If this option is set and the input file/buffer is not compressed data, the module will allow reading of it anyway. In addition, if the input file/buffer does contain compressed data and there is non-compressed data immediately following it, setting this option will make this module treat the whole file/buffer as a single data stream. This option defaults to 1. "BlockSize => $num" When reading the compressed input data, IO::Uncompress::RawInflate will read it in blocks of $num bytes. This option defaults to 4096. "InputLength => $size" When present this option will limit the number of compressed bytes read from the input file/buffer to $size. This option can be used in the situation where there is useful data directly after the compressed data stream and you know beforehand the exact length of the compressed data stream. This option is mostly used when reading from a filehandle, in which case the file pointer will be left pointing to the first byte directly after the compressed data stream. This option defaults to off. "Append => 0|1" This option controls what the "read" method does with uncompressed data. If set to 1, all uncompressed data will be appended to the output parameter of the "read" method. If set to 0, the contents of the output parameter of the "read" method will be overwritten by the uncompressed data. Defaults to 0. "Strict => 0|1" This option is a no-op. Examples TODO Methods read Usage is $status = $z->read($buffer) Reads a block of compressed data (the size the the compressed block is determined by the "Buffer" option in the constructor), uncompresses it and writes any uncompressed data into $buffer. If the "Append" parameter is set in the constructor, the uncompressed data will be appended to the $buffer parameter. Otherwise $buffer will be overwritten. Returns the number of uncompressed bytes written to $buffer, zero if eof or a negative number on error. read Usage is $status = $z->read($buffer, $length) $status = $z->read($buffer, $length, $offset) $status = read($z, $buffer, $length) $status = read($z, $buffer, $length, $offset) Attempt to read $length bytes of uncompressed data into $buffer. The main difference between this form of the "read" method and the previous one, is that this one will attempt to return exactly $length bytes. The only circumstances that this function will not is if end-of-file or an IO error is encountered. Returns the number of uncompressed bytes written to $buffer, zero if eof or a negative number on error. getline Usage is $line = $z->getline() $line = <$z> Reads a single line. This method fully supports the use of of the variable $/ (or $INPUT_RECORD_SEPARATOR or $RS when "English" is in use) to determine what constitutes an end of line. Paragraph mode, record mode and file slurp mode are all supported. getc Usage is $char = $z->getc() Read a single character. ungetc Usage is $char = $z->ungetc($string) inflateSync Usage is $status = $z->inflateSync() TODO getHeaderInfo Usage is $hdr = $z->getHeaderInfo(); @hdrs = $z->getHeaderInfo(); This method returns either a hash reference (in scalar context) or a list or hash references (in array context) that contains information about each of the header fields in the compressed data stream(s). tell Usage is $z->tell() tell $z Returns the uncompressed file offset. eof Usage is $z->eof(); eof($z); Returns true if the end of the compressed input stream has been reached. seek $z->seek($position, $whence); seek($z, $position, $whence); Provides a sub-set of the "seek" functionality, with the restriction that it is only legal to seek forward in the input file/buffer. It is a fatal error to attempt to seek backward. The $whence parameter takes one the usual values, namely SEEK_SET, SEEK_CUR or SEEK_END. Returns 1 on success, 0 on failure. binmode Usage is $z->binmode binmode $z ; This is a noop provided for completeness. opened $z->opened() Returns true if the object currently refers to a opened file/buffer. autoflush my $prev = $z->autoflush() my $prev = $z->autoflush(EXPR) If the $z object is associated with a file or a filehandle, this method returns the current autoflush setting for the underlying filehandle. If "EXPR" is present, and is non-zero, it will enable flushing after every write/print operation. If $z is associated with a buffer, this method has no effect and always returns "undef". Note that the special variable $| cannot be used to set or retrieve the autoflush setting. input_line_number $z->input_line_number() $z->input_line_number(EXPR) Returns the current uncompressed line number. If "EXPR" is present it has the effect of setting the line number. Note that setting the line number does not change the current position within the file/buffer being read. The contents of $/ are used to to determine what constitutes a line terminator. fileno $z->fileno() fileno($z) If the $z object is associated with a file or a filehandle, "fileno" will return the underlying file descriptor. Once the "close" method is called "fileno" will return "undef". If the $z object is associated with a buffer, this method will return "undef". close $z->close() ; close $z ; Closes the output file/buffer. For most versions of Perl this method will be automatically invoked if the IO::Uncompress::RawInflate object is destroyed (either explicitly or by the variable with the reference to the object going out of scope). The exceptions are Perl versions 5.005 through 5.00504 and 5.8.0. In these cases, the "close" method will be called automatically, but not until global destruction of all live objects when the program is terminating. Therefore, if you want your scripts to be able to run on all versions of Perl, you should call "close" explicitly and not rely on automatic closing. Returns true on success, otherwise 0. If the "AutoClose" option has been enabled when the IO::Uncompress::RawInflate object was created, and the object is associated with a file, the underlying file will also be closed. nextStream Usage is my $status = $z->nextStream(); Skips to the next compressed data stream in the input file/buffer. If a new compressed data stream is found, the eof marker will be cleared and $. will be reset to 0. Returns 1 if a new stream was found, 0 if none was found, and -1 if an error was encountered. trailingData Usage is my $data = $z->trailingData(); Returns the data, if any, that is present immediately after the compressed data stream once uncompression is complete. It only makes sense to call this method once the end of the compressed data stream has been encountered. This option can be used when there is useful information immediately following the compressed data stream, and you don't know the length of the compressed data stream. If the input is a buffer, "trailingData" will return everything from the end of the compressed data stream to the end of the buffer. If the input is a filehandle, "trailingData" will return the data that is left in the filehandle input buffer once the end of the compressed data stream has been reached. You can then use the filehandle to read the rest of the input file. Don't bother using "trailingData" if the input is a filename. If you know the length of the compressed data stream before you start uncompressing, you can avoid having to use "trailingData" by setting the "InputLength" option in the constructor. Importing No symbolic constants are required by this IO::Uncompress::RawInflate at present. :all Imports "rawinflate" and $RawInflateError. Same as doing this use IO::Uncompress::RawInflate qw(rawinflate $RawInflateError) ; EXAMPLES Working with Net::FTP See IO::Uncompress::RawInflate::FAQ SEE ALSO Compress::Zlib, IO::Compress::Gzip, IO::Uncompress::Gunzip, IO::Compress::Deflate, IO::Uncompress::Inflate, IO::Compress::RawDeflate, IO::Compress::Bzip2, IO::Uncompress::Bunzip2, IO::Compress::Lzma, IO::Uncompress::UnLzma, IO::Compress::Xz, IO::Uncompress::UnXz, IO::Compress::Lzop, IO::Uncompress::UnLzop, IO::Compress::Lzf, IO::Uncompress::UnLzf, IO::Uncompress::AnyInflate, IO::Uncompress::AnyUncompress IO::Compress::FAQ File::GlobMapper, Archive::Zip, Archive::Tar, IO::Zlib For RFC 1950, 1951 and 1952 see http://www.faqs.org/rfcs/rfc195_.html, http://www.faqs.org/rfcs/rfc1951.html and http://www.faqs.org/rfcs/rfc1952.html The zlib compression library was written by Jean-loup Gailly gzip@prep.ai.mit.edu and Mark Adler madler@alumni.caltech.edu. The primary site for the zlib compression library is http://www.zlib.org. The primary site for gzip is http://www.gzip.org. AUTHOR This module was written by Paul Marquess, pmqs@cpan.org. MODIFICATION HISTORY See the Changes file. COPYRIGHT AND LICENSE Copyright (c) 2005-2012 Paul Marquess. All rights reserved. This program is free software; you can redistribute it and/or modify it under the same terms as Perl itself. perl v5.16.2 2012-10-25 IO::Uncompress::RawInflate(3pm) |
Сообщение о проблемах
Способ сообщить о проблеме с этой страницей руководства зависит от типа проблемы:
- Ошибки содержания
- Ошибки отчета в содержании этой документации к проекту Perl. (См. perlbug (1) для инструкций представления.)
- Отчеты об ошибках
- Сообщите об ошибках в функциональности описанного инструмента или API к Apple через Генератор отчетов Ошибки и к проекту Perl, использующему perlbug (1).
- Форматирование проблем
- Отчет, форматирующий ошибки в интерактивной версии этих страниц со ссылками на отзыв ниже.