Spec-Zone .ru
спецификации, руководства, описания, API

18.5. Partition Selection

MySQL 5.6 supports explicit selection of partitions and subpartitions that, when executing a statement, should be checked for rows matching a given WHERE condition. Partition selection is similar to partition pruning, in that only specific partitions are checked for matches, but differs in two key respects:

  1. The partitions to be checked are specified by the issuer of the statement, unlike partition pruning, which is automatic.

  2. Whereas partition pruning applies only to queries, explicit selection of partitions is supported for both queries and a number of DML statements.

SQL statements supporting explicit partition selection are listed here:

The remainder of this section discusses explicit partition selection as it applies generally to the statements just listed, and provides some examples.

Explicit partition selection is implemented using a PARTITION option. For all supported statements, this option uses the syntax shown here:

      PARTITION (partition_names)      partition_names:          partition_name, ...

This option always follows the name of the table to which the partition or partitions belong. partition_names is a comma-separated list of partitions or subpartitions to be used. Each name in this list must be the name of an existing partition or subpartition of the specified table; if any of the partitions or subpartitions are not found, the statement fails with an error (partition 'partition_name' doesn't exist). Partitions and subpartitions named in partition_names may be listed in any order, and may overlap.

When the PARTITION option is used, only the partitions and subpartitions listed are checked for matching rows. This option can be used in a SELECT statement to determine which rows belong to a given partition. Consider a partitioned table named employees, created and populated using the statements shown here:

SET @@SQL_MODE = '';CREATE TABLE employees  (    id INT NOT NULL AUTO_INCREMENT PRIMARY KEY,    fname VARCHAR(25) NOT NULL,    lname VARCHAR(25) NOT NULL,    store_id INT NOT NULL,    department_id INT NOT NULL)       PARTITION BY RANGE(id)  (        PARTITION p0 VALUES LESS THAN (5),        PARTITION p1 VALUES LESS THAN (10),        PARTITION p2 VALUES LESS THAN (15),        PARTITION p3 VALUES LESS THAN MAXVALUE);INSERT INTO employees VALUES    ('', 'Bob', 'Taylor', 3, 2), ('', 'Frank', 'Williams', 1, 2),     ('', 'Ellen', 'Johnson', 3, 4), ('', 'Jim', 'Smith', 2, 4),      ('', 'Mary', 'Jones', 1, 1), ('', 'Linda', 'Black', 2, 3),    ('', 'Ed', 'Jones', 2, 1), ('', 'June', 'Wilson', 3, 1),     ('', 'Andy', 'Smith', 1, 3), ('', 'Lou', 'Waters', 2, 4),      ('', 'Jill', 'Stone', 1, 4), ('', 'Roger', 'White', 3, 2),    ('', 'Howard', 'Andrews', 1, 2), ('', 'Fred', 'Goldberg', 3, 3),     ('', 'Barbara', 'Brown', 2, 3), ('', 'Alice', 'Rogers', 2, 2),      ('', 'Mark', 'Morgan', 3, 3), ('', 'Karen', 'Cole', 3, 2);

You can see which rows are stored in partition p1 like this:

mysql> SELECT * FROM employees PARTITION (p1);+----+-------+--------+----------+---------------+| id | fname | lname  | store_id | department_id |+----+-------+--------+----------+---------------+|  5 | Mary  | Jones  |        1 |             1 ||  6 | Linda | Black  |        2 |             3 ||  7 | Ed    | Jones  |        2 |             1 ||  8 | June  | Wilson |        3 |             1 ||  9 | Andy  | Smith  |        1 |             3 |+----+-------+--------+----------+---------------+5 rows in set (0.00 sec)

The result is the same as obtained by the query SELECT * FROM employees WHERE id BETWEEN 5 AND 9.

To obtain rows from multiple partitions, supply their names as a comma-delimited list. For example, SELECT * FROM employees PARTITION (p1, p2) returns all rows from partitions p1 and p2 while excluding rows from the remaining partitions.

Any valid query against a partitioned table can be rewritten with a PARTITION option to restrict the result to one or more desired partitions. You can use WHERE conditions, ORDER BY and LIMIT options, and so on. You can also use aggregate functions with HAVING and GROUP BY options. Each of the following queries produces a valid result when run on the employees table as previously defined:

mysql> SELECT * FROM employees PARTITION (p0,
        p2)    ->     WHERE lname LIKE 'S%';+----+-------+-------+----------+---------------+| id | fname | lname | store_id | department_id |+----+-------+-------+----------+---------------+|  4 | Jim   | Smith |        2 |             4 || 11 | Jill  | Stone |        1 |             4 |+----+-------+-------+----------+---------------+2 rows in set (0.00 sec)mysql> SELECT id, CONCAT(fname, ' ', lname) AS name     ->     FROM employees PARTITION (p0) ORDER BY lname;+----+----------------+| id | name           |+----+----------------+|  3 | Ellen Johnson  ||  4 | Jim Smith      ||  1 | Bob Taylor     ||  2 | Frank Williams |+----+----------------+4 rows in set (0.06 sec)mysql> SELECT store_id, COUNT(department_id) AS c     ->     FROM employees PARTITION (p1,p2,p3)     ->     GROUP BY store_id HAVING c > 4;+---+----------+| c | store_id |+---+----------+| 5 |        2 || 5 |        3 |+---+----------+2 rows in set (0.00 sec)

Statements using partition selection can be employed with tables using any of the partitioning types supported in MySQL 5.6. When a table is created using [LINEAR] HASH or [LINEAR] KEY partitioning and the names of the partitions are not specified, MySQL automatically names the partitions p0, p1, p2, ..., pN-1, where N is the number of partitions. For subpartitions not explicitly named, MySQL assigns automatically to the subpartitions in each partition pX the names pXsp0, pXsp1, pXsp2, ..., pXspM-1, where M is the number of subpartitions. When executing against this table a SELECT (or other SQL statement for which explicit partition selection is allowed), you can use these generated names in a PARTITION option, as shown here:

mysql> CREATE TABLE employees_sub (    ->     id INT NOT NULL AUTO_INCREMENT,    ->     fname VARCHAR(25) NOT NULL,    ->     lname VARCHAR(25) NOT NULL,    ->     store_id INT NOT NULL,    ->     department_id
        INT NOT NULL,    ->     PRIMARY KEY pk (id,
        lname)    -> )       ->     PARTITION BY RANGE(id)    ->     SUBPARTITION
        BY KEY (lname)    ->     SUBPARTITIONS 2 (    ->         PARTITION p0 VALUES LESS THAN (5),    ->         PARTITION p1 VALUES LESS THAN (10),    ->         PARTITION p2 VALUES LESS THAN (15),    ->         PARTITION p3 VALUES LESS THAN MAXVALUE    -> );Query OK, 0 rows affected (1.14 sec)mysql> INSERT INTO employees_sub   # re-use data in employees table    ->     SELECT * FROM employees;Query OK, 18 rows affected (0.09 sec)Records: 18  Duplicates: 0  Warnings: 0mysql> SELECT id, CONCAT(fname, ' ', lname) AS name    ->     FROM employees_sub PARTITION (p2sp1);+----+---------------+| id | name          |+----+---------------+| 10 | Lou Waters    || 14 | Fred Goldberg |+----+---------------+2 rows in set (0.00 sec)

You may also use a PARTITION option in the SELECT portion of an INSERT ... SELECT statement, as shown here:

mysql> CREATE TABLE employees_copy LIKE
        employees;Query OK, 0 rows affected (0.28 sec)mysql> INSERT
        INTO employees_copy     ->     SELECT * FROM employees
        PARTITION (p2);Query OK, 5 rows affected (0.04 sec)Records: 5  Duplicates: 0  Warnings: 0mysql> SELECT * FROM employees_copy;+----+--------+----------+----------+---------------+| id | fname  | lname    | store_id | department_id |+----+--------+----------+----------+---------------+| 10 | Lou    | Waters   |        2 |             4 || 11 | Jill   | Stone    |        1 |             4 || 12 | Roger  | White    |        3 |             2 || 13 | Howard | Andrews  |        1 |             2 || 14 | Fred   | Goldberg |        3 |             3 |+----+--------+----------+----------+---------------+5 rows in set (0.00 sec)

Partition selection can also be used with joins. Suppose we create and populate two tables using the statements shown here:

CREATE TABLE stores (    id INT NOT NULL AUTO_INCREMENT PRIMARY KEY,    city VARCHAR(30) NOT NULL)    PARTITION BY HASH(id)    PARTITIONS 2;    INSERT INTO stores VALUES    ('', 'Nambucca'), ('', 'Uranga'),     ('', 'Bellingen'), ('', 'Grafton');    CREATE TABLE departments  (    id INT NOT NULL AUTO_INCREMENT PRIMARY KEY,    name VARCHAR(30) NOT NULL)    PARTITION BY KEY(id)    PARTITIONS 2;    INSERT INTO departments VALUES    ('', 'Sales'), ('', 'Customer Service'),     ('', 'Delivery'), ('', 'Accounting');

You can explicitly select partitions (or subpartitions, or both) from any or all of the tables in a join. (Note that the PARTITION option used to select partitions from a given table immediately follows the name of the table, before all other options, including any table alias.) For example, the following query gets the name, employee ID, department, and city of all employees who work in the Sales or Delivery department (partition p1 of the departments table) at the stores in either of the cities of Nambucca and Bellingen (partition p0 of the stores table):

mysql> SELECT    ->     e.id AS 'Employee ID', CONCAT(e.fname, ' ', e.lname) AS Name,    ->     s.city AS City, d.name AS department    -> FROM employees AS e    ->     JOIN
        stores PARTITION (p1) AS s ON e.store_id=s.id    ->     JOIN
        departments PARTITION (p0) AS d ON e.department_id=d.id    -> ORDER BY e.lname;+-------------+---------------+-----------+------------+| Employee ID | Name          | City      | department |+-------------+---------------+-----------+------------+|          14 | Fred Goldberg | Bellingen | Delivery   ||           5 | Mary Jones    | Nambucca  | Sales      ||          17 | Mark Morgan   | Bellingen | Delivery   ||           9 | Andy Smith    | Nambucca  | Delivery   ||           8 | June Wilson   | Bellingen | Sales      |+-------------+---------------+-----------+------------+5 rows in set (0.00 sec)

For general information about joins in MySQL, see Section 13.2.9.2, "JOIN Syntax".

When the PARTITION option is used with DELETE statements, only those partitions (and subpartitions, if any) listed with the option are checked for rows to be deleted. Any other partitions are ignored, as shown here:

mysql> SELECT * FROM employees WHERE fname LIKE
        'j%';+----+-------+--------+----------+---------------+| id | fname | lname  | store_id | department_id |+----+-------+--------+----------+---------------+|  4 | Jim   | Smith  |        2 |             4 ||  8 | June  | Wilson |        3 |             1 || 11 | Jill  | Stone  |        1 |             4 |+----+-------+--------+----------+---------------+3 rows in set (0.00 sec)mysql> DELETE FROM employees PARTITION (p0, p1)     ->     WHERE fname LIKE 'j%';Query OK, 2 rows affected (0.09 sec)mysql> SELECT * FROM employees WHERE fname LIKE 'j%';+----+-------+-------+----------+---------------+| id | fname | lname | store_id | department_id |+----+-------+-------+----------+---------------+| 11 | Jill  | Stone |        1 |             4 |+----+-------+-------+----------+---------------+1 row in set (0.00 sec)

Only the two rows in partitions p0 and p1 matching the WHERE condition were deleted. As you can see from the result when the SELECT is run a second time, there remains a row in the table matching the WHERE condition, but residing in a different partition (p2).

UPDATE statements using explicit partition selection behave in the same way; only rows in the partitions referenced by the PARTITION option are considered when determining the rows to be updated, as can be seen by executing the following statements:

mysql> UPDATE employees PARTITION
        (p0)     ->     SET store_id = 2 WHERE fname = 'Jill';Query OK, 0 rows affected (0.00 sec)Rows matched: 0  Changed: 0  Warnings: 0mysql> SELECT * FROM employees WHERE fname = 'Jill';+----+-------+-------+----------+---------------+| id | fname | lname | store_id | department_id |+----+-------+-------+----------+---------------+| 11 | Jill  | Stone |        1 |             4 |+----+-------+-------+----------+---------------+1 row in set (0.00 sec)mysql> UPDATE employees PARTITION (p2)    ->     SET store_id = 2 WHERE fname = 'Jill';Query OK, 1 row affected (0.09 sec)Rows matched: 1  Changed: 1  Warnings: 0mysql> SELECT * FROM employees WHERE fname = 'Jill';+----+-------+-------+----------+---------------+| id | fname | lname | store_id | department_id |+----+-------+-------+----------+---------------+| 11 | Jill  | Stone |        2 |             4 |+----+-------+-------+----------+---------------+1 row in set (0.00 sec)

In the same way, when PARTITION is used with DELETE, only rows in the partition or partitions named in the partition list are checked for deletion.

For statements that insert rows, the behavior differs in that failure to find a suitable partition causes the statement to fail. This is true for both INSERT and REPLACE statements, as shown here:

mysql> INSERT INTO employees PARTITION (p2) VALUES
        (20, 'Jan', 'Jones', 1, 3);ERROR 1729 (HY000): Found a row not matching the given partition setmysql> INSERT INTO employees PARTITION (p3) VALUES (20, 'Jan', 'Jones', 1,
        3);Query OK, 1 row affected (0.07 sec)mysql> REPLACE INTO employees PARTITION (p0) VALUES (20, 'Jan', 'Jones', 3, 2);ERROR 1729 (HY000): Found a row not matching the given partition setmysql> REPLACE INTO employees PARTITION (p3) VALUES (20, 'Jan', 'Jones', 3, 2);Query OK, 2 rows affected (0.09 sec)

For statements that write multiple rows to a partitioned table that uses the InnoDB storage engine: If any row in the list following VALUES cannot be written to one of the partitions specified in the partition_names list, the entire statement fails and no rows are written. This is shown for INSERT statements in the following example, reusing the employees table created previously:

mysql> ALTER TABLE employees    ->     REORGANIZE PARTITION p3 INTO (    ->         PARTITION p3 VALUES LESS THAN (20),    ->         PARTITION p4 VALUES LESS THAN (25),    ->         PARTITION p5 VALUES LESS THAN MAXVALUE    ->     );Query OK, 6 rows affected (2.09 sec)Records: 6  Duplicates: 0  Warnings: 0mysql> SHOW CREATE TABLE employees\G*************************** 1. row ***************************       Table: employeesCreate Table: CREATE TABLE `employees` (  `id` int(11) NOT NULL AUTO_INCREMENT,  `fname` varchar(25) NOT NULL,  `lname` varchar(25) NOT NULL,  `store_id` int(11) NOT NULL,  `department_id` int(11) NOT NULL,  PRIMARY KEY (`id`)) ENGINE=InnoDB AUTO_INCREMENT=27 DEFAULT CHARSET=latin1/*!50100 PARTITION BY RANGE (id)(PARTITION p0 VALUES LESS THAN (5) ENGINE = InnoDB, PARTITION p1 VALUES LESS THAN (10) ENGINE = InnoDB, PARTITION p2 VALUES LESS THAN (15) ENGINE = InnoDB, PARTITION p3 VALUES LESS THAN (20) ENGINE = InnoDB, PARTITION p4 VALUES LESS THAN (25) ENGINE = InnoDB, PARTITION p5 VALUES LESS THAN MAXVALUE ENGINE = InnoDB) */1 row in set (0.00 sec)mysql> INSERT INTO employees PARTITION (p3, p4)
        VALUES     ->     (24, 'Tim', 'Greene', 3, 1), (26, 'Linda',
        'Mills', 2,
        1);ERROR 1729 (HY000): Found a row not matching the given partition setmysql> INSERT INTO employees PARTITION (p3, p4. p5)
        VALUES     ->     (24, 'Tim', 'Greene', 3, 1), (26, 'Linda',
        'Mills', 2, 1);Query OK, 2 rows affected (0.06 sec)Records: 2  Duplicates: 0  Warnings: 0

The preceding is true for both INSERT statements and REPLACE statements that write multiple rows.

In MySQL 5.6.10 and later, partition selection is disabled for tables employing a storage engine that supplies automatic partitioning, such as NDB. (Bug #14827952)