Spec-Zone .ru спецификации, руководства, описания, API

Prior to the release of the Java^TM 2 SDK, an instance of a UnicastRemoteObject could be accessed from a server program that (1) created an instance of the remote object, and (2) ran all the time. Now with the introduction of the class java.rmi.activation.Activatable and the RMI daemon, rmid, programs can be written to register information about remote object implementations that should be created and execute "on demand," rather than running all the time. The RMI daemon, rmid, provides a Java virtual machine* (JVM) from which other JVM instances may be spawned.

Note:  For the remainder of this tutorial, the terms "activatable object implementation", "activatable object," and "implementation" may be used interchangeably to refer to the class, examples.activation.MyRemoteInterfaceImpl, which implements a remote interface and is activatable.

This tutorial is organized as follows:

• The steps to modify the implementation class
• The steps to modify the server class
• The steps to compile and run the example code

The files needed for this tutorial are:

• Client2.java, the class which will invoke a method on an activatable object
• MyRemoteInterface.java, the interface that extends java.rmi.Remote, implemented by:
• MyRemoteInterfaceImpl.java, the class which will be activated
• Setup2.java, the class which registers information about the activatable class with the RMI registry and the RMI daemon

You may notice that while the client code is included, it is not discussed in a step-by-step manner, like the implementation and setup classes. The reason for this omission, is that the client code for activatable objects is no different than the RMI client code for accessing non-activatable remote objects.  Activation is strictly a server-side implementation decision.

For all of the source code used in the activation tutorials, you may choose from these formats:

• activation.zip
• activation.tar
• activation.tar.Z

For this example, the implementation class will be examples.activation.MyRemoteInterfaceImpl. There are four steps to migrate an existing implementation class that extends from UnicastRemoteObject:

1. Make the appropriate imports in the implementation class
2. Modify the class declaration so that the class now extends from java.rmi.activation.Activatable
3. Remove or comment out the old no-argument constructor
4. Declare a two-argument constructor in the implementation class

Step 1:
Make the appropriate imports in the implementation class

import java.rmi.*;
import java.rmi.activation.*;

Step 2:
Modify the class declaration so that the class now extends from java.rmi.activation.Activatable

public class MyRemoteInterfaceImpl extends Activatable
    implements examples.activation.MyRemoteInterface {

Step 3:
Remove or comment out the old no-argument constructor

// public MyRemoteInterfaceImpl() throws RemoteException
// {
// }

Step 4:
Declare a two-argument constructor in the implementation class

public MyRemoteInterfaceImpl(ActivationID id, MarshalledObject data) 
    throws RemoteException {

    // Register the object with the activation system
    // then export it on an anonymous port
    //
    super(id, 0);
}

Creating the "setup" class

Unlike the RMI server class that must stay alive as long as the implementation needs to be made available, the job of the "setup" class is to create all the information necessary for the activatable class, without necessarily creating an instance of the remote object. For this example the setup class will be examples.activation.Setup2.

The setup class passes information about the activatable class to rmid, registers a remote reference (an instance of the activatable class's stub class) and an identifier (name) with the rmiregistry, and then the setup class may exit. There are seven steps to create a setup class:

1. Make the appropriate imports
2. Install a SecurityManager
3. Create an ActivationGroup instance
4. Create an ActivationDesc instance
5. Remove the reference to the implementation class creation, and register with rmid
6. Bind the stub to a name in the rmiregistry
7. Quit the setup application

Step 1:
Make the appropriate imports in the setup class

import java.rmi.*;
import java.rmi.activation.*
import java.util.Properties;

Step 2:
Install a SecurityManager

System.setSecurityManager(new RMISecurityManager());

Step 3:
Create an ActivationGroup instance

Note: In this example, for simplicity, we will use a policy file that gives global permission to anyone from anywhere. Do not use this policy file in a production environment. For more information on how to properly open up permissions using a java.security.policy file, please refer to to the following documents:

Default Policy Implementation and Policy File Syntax

Permissions in the Java 2 SDK

In the setup application, the job of the activation group descriptor is to provide all the information that rmid will require to contact the appropriate existing JVM or spawn a new JVM for the activatable object.

Note: In order to run this code on your system, you'll need to change the policy file location to be the absolute path to where you've installed the example policy file that came with the source code.

// Because of the Java 2 security model, a security policy should 
// be specified for the ActivationGroup VM. The first argument
// to the Properties put method, inherited from Hashtable, is 
// the key and the second is the value 
// 
Properties props = new Properties(); 
props.put("java.security.policy", 
   "/home/rmi_tutorial/activation/policy"); 

ActivationGroupDesc.CommandEnvironment ace = null; 
ActivationGroupDesc exampleGroup = new ActivationGroupDesc(props, ace);

// Once the ActivationGroupDesc has been created, register it 
// with the activation system to obtain its ID
//
ActivationGroupID agi = 
   ActivationGroup.getSystem().registerGroup(exampleGroup);

Step 4:
Create an ActivationDesc instance

In the setup application, the job of the activation descriptor is to provide all the information that rmid will require to create a new instance of the implementation class.

Note: In order to run this code on your system, you'll need to change the file URL location to be the location of the directory on your system, where you've installed the example source code.

// Don't forget the trailing slash at the end of the URL 
// or your classes won't be found 
// 
String location = "file:/home/rmi_tutorial/activation/"; 

// Create the rest of the parameters that will be passed to 
// the ActivationDesc constructor 
// 
MarshalledObject data = null; 

// The second argument to the ActivationDesc constructor will be used 
// to uniquely identify this class; it's location is relative to the 
// URL-formatted String, location. 
// 
ActivationDesc desc = new ActivationDesc 
    ("examples.activation.MyRemoteInterfaceImpl", location, data); 

Step 5:
Remove the reference to the implementation class creation, declare an instance of your remote interface, and register the activation descriptor with rmid

// MyRemoteInterfaceImpl mri = new MyRemoteInterfaceImpl(); 
// the above line is replaced with the following: 
// 
MyRemoteInterface mri = (MyRemoteInterface)Activatable.register(desc); 
System.out.println("Got the stub for the MyRemoteInterfaceImpl"); 

Step 6:
Bind the stub, that was returned by the Activatable.register method, to a name in the rmiregistry

Naming.rebind("MyRemoteInterfaceImpl", mri);
System.out.println("Exported MyRemoteInterfaceImpl");

Step 7:
Quit the setup application

System.exit(0);

Compile and run the code

There are six steps to compile and run the code:

1. Compile the remote interface, implementation, client, and setup classes
2. Run rmic on the implementation class
3. Start the rmiregistry
4. Start the activation daemon, rmid
5. Run the setup program
6. Run the client

Step 1:
Compile the remote interface, implementation, client and setup classes

% javac -d . MyRemoteInterface.java
% javac -d . MyRemoteInterfaceImpl.java
% javac -d . Client2.java
% javac -d . Setup2.java

Step 2:
Run rmic on the implementation class

% rmic -d . examples.activation.MyRemoteInterfaceImpl

Step 3:
Start the rmiregistry

% rmiregistry &

Note:  Before you start the rmiregistry, you must make sure that the shell or window in which you will run the registry, either has no CLASSPATH set or has a CLASSPATH that does not include the path to any classes that you want downloaded to your client, including the stubs for your remote object implementation classes.

If you start the rmiregistry, and it can find your stub classes in its CLASSPATH, it will ignore the server's java.rmi.server.codebase property, and as a result, your client(s) will not be able to download the stub code for your remote object.

Step 4:
Start the activation daemon, rmid

% rmid -J-Djava.security.policy=rmid.policy &

Where rmid.policy is the name of the security policy file for rmid.

Note: By default, rmid now requires a security policy file, that is used to verify whether or not the information in each ActivationGroupDescriptor is allowed to be used to launch a JVM for an activation group. For complete details, please refer to the rmid man page for the Solaris operating environment and the rmid man page for the Microsoft Windows platform.

Step 5:
Run the setup program

Run the setup, setting the codebase property to be the location of the implementation stubs. There are four things that need to go on the same command line:

1. The "java" command
2. A property name=value pair that specifies the location of the security policy file
3. A property to specify where the stub code lives (no spaces from the "-D" all the way though the last "/")
4. The fully-qualified package name of the setup program.

There should be one space just after the word "java", one between the two properties, and a third one just before the word "examples" (which is very hard to see when you view this as text, in a browser, or on paper).

% java  -Djava.security.policy=/home/rmi_tutorial/activation/policy  -Djava.rmi.server.codebase=file:/home/rmi_tutorial/activation/  examples.activation.Setup2

The codebase property will be resolved to a URL, so it must have the form of "http://aHost/somesource/" or "file:/myDirectory/location/" or, due to the requirements of some operating systems, "file:///myDirectory/location/" (three slashes after the "file:").

While a file: URL is sometimes easier to use for running example code, using the file: URL will mean that the only clients that will be able to access the server are those that can access the same files system as the server (either by virtue of running on the same machine as the server or by using a shared filesystem, such as NFS). If you wish to use an HTTP server, but don't have one available to you, please feel free to download our HTTP server.

Please note that each of these sample URL strings has a trailing "/". The trailing slash is a requirement for the URL set by the java.rmi.server.codebase property, so the implementation can resolve (find) your class definition(s) properly. For more information on setting the java.rmi.server.codebase property from the command line, please take a look at our tutorial on dynamic code downloading using the java.rmi.server.codebase property.

If you forget the trailing slash on the property, or if the class files can't be located at the source (they aren't really being made available for download) or if you misspell the property name, you'll get thrown a java.lang.ClassNotFoundException. This exception will be thrown when you try to bind your remote object to the rmiregistry, or when the first client attempts to access that object's stub. If the latter case occurs, you have another problem as well because the rmiregistry was finding the stubs in its CLASSPATH.

The server output should look like this:

    Got the stub for the MyRemoteInterfaceImpl
    Exported MyRemoteInterfaceImpl

Step 6:
Run the client

The argument to the client program is the hostname of the implementation server, in this case, "vector".

% java -Djava.security.policy=/home/rmi_tutorial/activation/policy 
examples.activation.Client2 vector

The client output should look like this:

    Got a remote reference to the newly-Activatable object
    Returned from remote call
    Result: Successful execution of callMeRemotely() in MyRemoteInterfaceImpl

Copyright © 1999 Sun Microsystems, Inc. All Rights Reserved.  Please send comments to: rmi-comments@java.sun.com