Прямоугольник (Платформа Java SE 7)

java.lang. Объект
- java.awt.geom. RectangularShape
- - java.awt.geom. Rectangle2D
  - - java.awt. Прямоугольник

Все Реализованные Интерфейсы:

Форма, Сериализуемая, Cloneable

Прямые Известные Подклассы:

DefaultCaret
```
public class Rectangle
extends Rectangle2D
implements Shape, Serializable
```
A Rectangle определяет область в координатном пространстве, которое включается Rectangle верхняя левая точка объекта (x,y) в координатном пространстве, его ширине, и его высоте.
A Rectangle объект width и height public поля. Конструкторы, которые создают a Rectangle, и методы, которые могут изменить один, не предотвращают установку отрицательной величины для ширины или высоты.
A Rectangle то, ширина которого или высота являются точно нулевыми, имеет расположение вдоль тех осей с нулевой размерностью, но иначе считается пустым. isEmpty() метод возвратит true для такого Rectangle. Методы, которые тестируют если пустое Rectangle содержит или пересекает точку, или прямоугольник будет всегда возвращать false, если любая размерность будет нулем. Методы, которые комбинируют такой Rectangle с точкой или прямоугольником будет включать расположение Rectangle на той оси в результате, как будто add(Point) метод вызывали.
A Rectangle у того, ширина которого или высота отрицательны, нет ни расположения, ни размерности вдоль тех осей с отрицательными размерностями. Такой Rectangle обрабатывается как non-existant вдоль тех осей. Такой Rectangle также пусто относительно вычислений включения и методов, которые тестируют, если это содержит или пересекает точку, или прямоугольник будет всегда возвращать false. Методы, которые комбинируют такой Rectangle с точкой или прямоугольником проигнорирует Rectangle полностью в генерировании результата. Если два Rectangle объекты объединяются, и у каждого есть отрицательная размерность, у результата будет по крайней мере одна отрицательная размерность.
Методы, которые влияют только на расположение a Rectangle будет работать на его расположении независимо от того, есть ли у этого отрицательная или нулевая размерность вдоль любой оси.
Отметьте это a Rectangle созданный с конструктором без параметров по умолчанию будет иметь размерности 0x0 и поэтому быть пустым. Это Rectangle будет все еще иметь расположение (0,0) и внесет то расположение объединению и добавит операции. Код, пытающийся накапливать границы ряда точек, должен поэтому первоначально создать Rectangle с определенно отрицательной шириной и высота или это должны использовать первую точку в наборе, чтобы создать Rectangle. Например:
```
     Rectangle bounds = new Rectangle(0, 0, -1, -1);
     for (int i = 0; i < points.length; i++) {
         bounds.add(points[i]);
     }
 
```
or if we know that the points array contains at least one point:
```
     Rectangle bounds = new Rectangle(points[0]);
     for (int i = 1; i < points.length; i++) {
         bounds.add(points[i]);
     }
 
```
This class uses 32-bit integers to store its location and dimensions. Frequently operations may produce a result that exceeds the range of a 32-bit integer. The methods will calculate their results in a way that avoids any 32-bit overflow for intermediate results and then choose the best representation to store the final results back into the 32-bit fields which hold the location and dimensions. The location of the result will be stored into the x and y fields by clipping the true result to the nearest 32-bit value. The values stored into the width and height dimension fields will be chosen as the 32-bit values that encompass the largest part of the true result as possible. Generally this means that the dimension will be clipped independently to the range of 32-bit integers except that if the location had to be moved to store it into its pair of 32-bit fields then the dimensions will be adjusted relative to the "best representation" of the location. If the true result had a negative dimension and was therefore non-existant along one or both axes, the stored dimensions will be negative numbers in those axes. If the true result had a location that could be represented within the range of 32-bit integers, but zero dimension along one or both axes, then the stored dimensions will be zero in those axes.
Since:

1.0

See Also:
Serialized Form

Nested Class Summary
- Nested classes/interfaces inherited from class java.awt.geom.Rectangle2D
  Rectangle2D.Double, Rectangle2D.Float

Field Summary

Fields
Modifier and Type	Field and Description
`int`	`высота` The height of the `Rectangle`.
`int`	`ширина` The width of the `Rectangle`.
`int`	`x` The X coordinate of the upper-left corner of the `Rectangle`.
`int`	`y` The Y coordinate of the upper-left corner of the `Rectangle`.

Fields inherited from class java.awt.geom.Rectangle2D
OUT_BOTTOM, OUT_LEFT, OUT_RIGHT, OUT_TOP

Constructor Summary

Constructors
Constructor and Description
`Rectangle()` Constructs a new `Rectangle` whose upper-left corner is at (0, 0) in the coordinate space, and whose width and height are both zero.
`Rectangle(Dimension d)` Constructs a new `Rectangle` whose top left corner is (0, 0) and whose width and height are specified by the `Dimension` argument.
`Rectangle(int width, int height)` Constructs a new `Rectangle` whose upper-left corner is at (0, 0) in the coordinate space, and whose width and height are specified by the arguments of the same name.
`Rectangle(int x, int y, int width, int height)` Constructs a new `Rectangle` whose upper-left corner is specified as `(x,y)` and whose width and height are specified by the arguments of the same name.
`Rectangle(Point p)` Constructs a new `Rectangle` whose upper-left corner is the specified `Point`, and whose width and height are both zero.
`Rectangle(Point p, Dimension d)` Constructs a new `Rectangle` whose upper-left corner is specified by the `Point` argument, and whose width and height are specified by the `Dimension` argument.
`Rectangle(Rectangle r)` Constructs a new `Rectangle`, initialized to match the values of the specified `Rectangle`.

Method Summary

Methods
Modifier and Type	Method and Description
`void`	`add(int newx, int newy)` Adds a point, specified by the integer arguments `newx,newy` to the bounds of this `Rectangle`.
`void`	`add(Point pt)` Adds the specified `Point` to the bounds of this `Rectangle`.
`void`	`add(Rectangle r)` Adds a `Rectangle` to this `Rectangle`.
`boolean`	`contains(int x, int y)` Checks whether or not this `Rectangle` contains the point at the specified location `(x,y)`.
`boolean`	`contains(int X, int Y, int W, int H)` Checks whether this `Rectangle` entirely contains the `Rectangle` at the specified location `(X,Y)` with the specified dimensions `(W,H)`.
`boolean`	`contains(Point p)` Checks whether or not this `Rectangle` contains the specified `Point`.
`boolean`	`contains(Rectangle r)` Checks whether or not this `Rectangle` entirely contains the specified `Rectangle`.
`Rectangle2D`	`createIntersection(Rectangle2D r)` Returns a new `Rectangle2D` object representing the intersection of this `Rectangle2D` with the specified `Rectangle2D`.
`Rectangle2D`	`createUnion(Rectangle2D r)` Returns a new `Rectangle2D` object representing the union of this `Rectangle2D` with the specified `Rectangle2D`.
`boolean`	`equals(Object obj)` Checks whether two rectangles are equal.
`Прямоугольник`	`getBounds()` Gets the bounding `Rectangle` of this `Rectangle`.
`Rectangle2D`	`getBounds2D()` Returns a high precision and more accurate bounding box of the `Shape` than the `getBounds` method.
`double`	`getHeight()` Returns the height of the bounding `Rectangle` in `double` precision.
`Точка`	`getLocation()` Returns the location of this `Rectangle`.
`Размерность`	`getSize()` Gets the size of this `Rectangle`, represented by the returned `Dimension`.
`double`	`getWidth()` Returns the width of the bounding `Rectangle` in `double` precision.
`double`	`getX()` Returns the X coordinate of the bounding `Rectangle` in `double` precision.
`double`	`getY()` Returns the Y coordinate of the bounding `Rectangle` in `double` precision.
`void`	`grow(int h, int v)` Resizes the `Rectangle` both horizontally and vertically.
`boolean`	`inside(int X, int Y)` Deprecated. As of JDK version 1.1, replaced by `contains(int, int)`.
`Прямоугольник`	`intersection(Rectangle r)` Computes the intersection of this `Rectangle` with the specified `Rectangle`.
`boolean`	`intersects(Rectangle r)` Determines whether or not this `Rectangle` and the specified `Rectangle` intersect.
`boolean`	`isEmpty()` Determines whether the `RectangularShape` is empty.
`void`	`move(int x, int y)` Deprecated. As of JDK version 1.1, replaced by `setLocation(int, int)`.
`int`	`outcode(double x, double y)` Determines where the specified coordinates lie with respect to this `Rectangle2D`.
`void`	`reshape(int x, int y, int width, int height)` Deprecated. As of JDK version 1.1, replaced by `setBounds(int, int, int, int)`.
`void`	`resize(int width, int height)` Deprecated. As of JDK version 1.1, replaced by `setSize(int, int)`.
`void`	`setBounds(int x, int y, int width, int height)` Sets the bounding `Rectangle` of this `Rectangle` to the specified `x`, `y`, `width`, and `height`.
`void`	`setBounds(Rectangle r)` Sets the bounding `Rectangle` of this `Rectangle` to match the specified `Rectangle`.
`void`	`setLocation(int x, int y)` Moves this `Rectangle` to the specified location.
`void`	`setLocation(Point p)` Moves this `Rectangle` to the specified location.
`void`	`setRect(double x, double y, double width, double height)` Sets the bounds of this `Rectangle` to the integer bounds which encompass the specified `x`, `y`, `width`, and `height`.
`void`	`setSize(Dimension d)` Sets the size of this `Rectangle` to match the specified `Dimension`.
`void`	`setSize(int width, int height)` Sets the size of this `Rectangle` to the specified width and height.
`Строка`	`toString()` Returns a `String` representing this `Rectangle` and its values.
`void`	`translate(int dx, int dy)` Translates this `Rectangle` the indicated distance, to the right along the X coordinate axis, and downward along the Y coordinate axis.
`Прямоугольник`	`union(Rectangle r)` Computes the union of this `Rectangle` with the specified `Rectangle`.

Methods inherited from class java.awt.geom.Rectangle2D
add, add, add, contains, contains, getPathIterator, getPathIterator, hashCode, intersect, intersects, intersectsLine, intersectsLine, outcode, setFrame, setRect, union

Methods inherited from class java.awt.geom.RectangularShape
clone, contains, contains, getCenterX, getCenterY, getFrame, getMaxX, getMaxY, getMinX, getMinY, intersects, setFrame, setFrame, setFrameFromCenter, setFrameFromCenter, setFrameFromDiagonal, setFrameFromDiagonal

Methods inherited from class java.lang.Object
finalize, getClass, notify, notifyAll, wait, wait, wait

Methods inherited from interface java.awt.Shape
contains, contains, contains, contains, getPathIterator, getPathIterator, intersects, intersects

- Field Detail
  - x
```
public int x
```
    The X coordinate of the upper-left corner of the Rectangle.
    
    Since:
    
    1.0
    
    See Also:
    setLocation(int, int), getLocation()
  - y
```
public int y
```
    The Y coordinate of the upper-left corner of the Rectangle.
    
    Since:
    
    1.0
    
    See Also:
    setLocation(int, int), getLocation()
  - width
```
public int width
```
    The width of the Rectangle.
    
    Since:
    
    1.0
    
    See Also:
    setSize(int, int), getSize()
  - height
```
public int height
```
    The height of the Rectangle.
    
    Since:
    
    1.0
    
    See Also:
    setSize(int, int), getSize()
- Constructor Detail
  - Rectangle
```
public Rectangle()
```
    Constructs a new Rectangle whose upper-left corner is at (0, 0) in the coordinate space, and whose width and height are both zero.
  - Rectangle
```
public Rectangle(Rectangle r)
```
    Constructs a new Rectangle, initialized to match the values of the specified Rectangle.
    
    Parameters:
    r - the Rectangle from which to copy initial values to a newly constructed Rectangle
    Since:
    
    1.1
  - Rectangle
```
public Rectangle(int x,
         int y,
         int width,
         int height)
```
    Constructs a new Rectangle whose upper-left corner is specified as (x,y) and whose width and height are specified by the arguments of the same name.
    
    Parameters:
    x - the specified X coordinate
    y - the specified Y coordinate
    width - the width of the Rectangle
    height - the height of the Rectangle
    Since:
    
    1.0
  - Rectangle
```
public Rectangle(int width,
         int height)
```
    Constructs a new Rectangle whose upper-left corner is at (0, 0) in the coordinate space, and whose width and height are specified by the arguments of the same name.
    
    Parameters:
    width - the width of the Rectangle
    height - the height of the Rectangle
  - Rectangle
```
public Rectangle(Point p,
         Dimension d)
```
    Constructs a new Rectangle whose upper-left corner is specified by the Point argument, and whose width and height are specified by the Dimension argument.
    
    Parameters:
    p - a Point that is the upper-left corner of the Rectangle
    d - a Dimension, representing the width and height of the Rectangle
  - Rectangle
```
public Rectangle(Point p)
```
    Constructs a new Rectangle whose upper-left corner is the specified Point, and whose width and height are both zero.
    
    Parameters:
    p - a Point that is the top left corner of the Rectangle
  - Rectangle
```
public Rectangle(Dimension d)
```
    Constructs a new Rectangle whose top left corner is (0, 0) and whose width and height are specified by the Dimension argument.
    
    Parameters:
    d - a Dimension, specifying width and height
- Method Detail
  - getX
```
public double getX()
```
    Returns the X coordinate of the bounding Rectangle in double precision.
    
    Specified by:
    
    getX in class RectangularShape
    
    Returns:
    the X coordinate of the bounding Rectangle.
  - getY
```
public double getY()
```
    Returns the Y coordinate of the bounding Rectangle in double precision.
    
    Specified by:
    
    getY in class RectangularShape
    
    Returns:
    the Y coordinate of the bounding Rectangle.
  - getWidth
```
public double getWidth()
```
    Returns the width of the bounding Rectangle in double precision.
    
    Specified by:
    
    getWidth in class RectangularShape
    
    Returns:
    the width of the bounding Rectangle.
  - getHeight
```
public double getHeight()
```
    Returns the height of the bounding Rectangle in double precision.
    
    Specified by:
    
    getHeight in class RectangularShape
    
    Returns:
    the height of the bounding Rectangle.
  - getBounds
```
public Rectangle getBounds()
```
    Gets the bounding Rectangle of this Rectangle.
    This method is included for completeness, to parallel the getBounds method of Component.
    
    Specified by:
    
    getBounds in interface Shape
    
    Overrides:
    
    getBounds in class RectangularShape
    
    Returns:
    a new Rectangle, equal to the bounding Rectangle for this Rectangle.
    Since:
    
    1.1
    
    See Also:
    Component.getBounds(), setBounds(Rectangle), setBounds(int, int, int, int)
  - getBounds2D
```
public Rectangle2D getBounds2D()
```
    Returns a high precision and more accurate bounding box of the Shape than the getBounds method. Note that there is no guarantee that the returned Rectangle2D is the smallest bounding box that encloses the Shape, only that the Shape lies entirely within the indicated Rectangle2D. The bounding box returned by this method is usually tighter than that returned by the getBounds method and never fails due to overflow problems since the return value can be an instance of the Rectangle2D that uses double precision values to store the dimensions.
    Note that the definition of insideness can lead to situations where points on the defining outline of the shape may not be considered contained in the returned bounds object, but only in cases where those points are also not considered contained in the original shape.
    
    If a point is inside the shape according to the contains(point) method, then it must be inside the returned Rectangle2D bounds object according to the contains(point) method of the bounds. Specifically:
    
    shape.contains(p) requires bounds.contains(p)
    
    If a point is not inside the shape, then it might still be contained in the bounds object:
    
    bounds.contains(p) does not imply shape.contains(p)
    
    Specified by:
    
    getBounds2D in interface Shape
    
    Overrides:
    
    getBounds2D in class Rectangle2D
    
    Returns:
    an instance of Rectangle2D that is a high-precision bounding box of the Shape.
    Since:
    
    1.2
    
    See Also:
    Shape.getBounds()
  - setBounds
```
public void setBounds(Rectangle r)
```
    Sets the bounding Rectangle of this Rectangle to match the specified Rectangle.
    This method is included for completeness, to parallel the setBounds method of Component.
    
    Parameters:
    r - the specified Rectangle
    Since:
    
    1.1
    
    See Also:
    getBounds(), Component.setBounds(java.awt.Rectangle)
  - setBounds
```
public void setBounds(int x,
             int y,
             int width,
             int height)
```
    Sets the bounding Rectangle of this Rectangle to the specified x, y, width, and height.
    This method is included for completeness, to parallel the setBounds method of Component.
    
    Parameters:
    x - the new X coordinate for the upper-left corner of this Rectangle
    y - the new Y coordinate for the upper-left corner of this Rectangle
    width - the new width for this Rectangle
    height - the new height for this Rectangle
    Since:
    
    1.1
    
    See Also:
    getBounds(), Component.setBounds(int, int, int, int)
  - setRect
```
public void setRect(double x,
           double y,
           double width,
           double height)
```
    Sets the bounds of this Rectangle to the integer bounds which encompass the specified x, y, width, and height. If the parameters specify a Rectangle that exceeds the maximum range of integers, the result will be the best representation of the specified Rectangle intersected with the maximum integer bounds.
    
    Specified by:
    
    setRect in class Rectangle2D
    
    Parameters:
    x - the X coordinate of the upper-left corner of the specified rectangle
    y - the Y coordinate of the upper-left corner of the specified rectangle
    width - the width of the specified rectangle
    height - the new height of the specified rectangle
  - reshape
```
@Deprecated
public void reshape(int x,
                      int y,
                      int width,
                      int height)
```
    Deprecated. As of JDK version 1.1, replaced by setBounds(int, int, int, int).
    
    Sets the bounding Rectangle of this Rectangle to the specified x, y, width, and height.
    
    Parameters:
    x - the new X coordinate for the upper-left corner of this Rectangle
    y - the new Y coordinate for the upper-left corner of this Rectangle
    width - the new width for this Rectangle
    height - the new height for this Rectangle
  - getLocation
```
public Point getLocation()
```
    Returns the location of this Rectangle.
    This method is included for completeness, to parallel the getLocation method of Component.
    
    Returns:
    the Point that is the upper-left corner of this Rectangle.
    Since:
    
    1.1
    
    See Also:
    Component.getLocation(), setLocation(Point), setLocation(int, int)
  - setLocation
```
public void setLocation(Point p)
```
    Moves this Rectangle to the specified location.
    This method is included for completeness, to parallel the setLocation method of Component.
    
    Parameters:
    p - the Point specifying the new location for this Rectangle
    Since:
    
    1.1
    
    See Also:
    Component.setLocation(java.awt.Point), getLocation()
  - setLocation
```
public void setLocation(int x,
               int y)
```
    Moves this Rectangle to the specified location.
    This method is included for completeness, to parallel the setLocation method of Component.
    
    Parameters:
    x - the X coordinate of the new location
    y - the Y coordinate of the new location
    Since:
    
    1.1
    
    See Also:
    getLocation(), Component.setLocation(int, int)
  - move
```
@Deprecated
public void move(int x,
                   int y)
```
    Deprecated. As of JDK version 1.1, replaced by setLocation(int, int).
    
    Moves this Rectangle to the specified location.
    
    Parameters:
    x - the X coordinate of the new location
    y - the Y coordinate of the new location
  - translate
```
public void translate(int dx,
             int dy)
```
    Translates this Rectangle the indicated distance, to the right along the X coordinate axis, and downward along the Y coordinate axis.
    
    Parameters:
    dx - the distance to move this Rectangle along the X axis
    dy - the distance to move this Rectangle along the Y axis
    See Also:
    setLocation(int, int), setLocation(java.awt.Point)
  - getSize
```
public Dimension getSize()
```
    Gets the size of this Rectangle, represented by the returned Dimension.
    This method is included for completeness, to parallel the getSize method of Component.
    
    Returns:
    a Dimension, representing the size of this Rectangle.
    Since:
    
    1.1
    
    See Also:
    Component.getSize(), setSize(Dimension), setSize(int, int)
  - setSize
```
public void setSize(Dimension d)
```
    Sets the size of this Rectangle to match the specified Dimension.
    This method is included for completeness, to parallel the setSize method of Component.
    
    Parameters:
    d - the new size for the Dimension object
    Since:
    
    1.1
    
    See Also:
    Component.setSize(java.awt.Dimension), getSize()
  - setSize
```
public void setSize(int width,
           int height)
```
    Sets the size of this Rectangle to the specified width and height.
    This method is included for completeness, to parallel the setSize method of Component.
    
    Parameters:
    width - the new width for this Rectangle
    height - the new height for this Rectangle
    Since:
    
    1.1
    
    See Also:
    Component.setSize(int, int), getSize()
  - resize
```
@Deprecated
public void resize(int width,
                     int height)
```
    Deprecated. As of JDK version 1.1, replaced by setSize(int, int).
    
    Sets the size of this Rectangle to the specified width and height.
    
    Parameters:
    width - the new width for this Rectangle
    height - the new height for this Rectangle
  - contains
```
public boolean contains(Point p)
```
    Checks whether or not this Rectangle contains the specified Point.
    
    Parameters:
    p - the Point to test
    
    Returns:
    true if the specified Point is inside this Rectangle; false otherwise.
    Since:
    
    1.1
  - contains
```
public boolean contains(int x,
               int y)
```
    Checks whether or not this Rectangle contains the point at the specified location (x,y).
    
    Parameters:
    x - the specified X coordinate
    y - the specified Y coordinate
    
    Returns:
    true if the point (x,y) is inside this Rectangle; false otherwise.
    Since:
    
    1.1
  - contains
```
public boolean contains(Rectangle r)
```
    Checks whether or not this Rectangle entirely contains the specified Rectangle.
    
    Parameters:
    r - the specified Rectangle
    
    Returns:
    true if the Rectangle is contained entirely inside this Rectangle; false otherwise
    Since:
    
    1.2
  - contains
```
public boolean contains(int X,
               int Y,
               int W,
               int H)
```
    Checks whether this Rectangle entirely contains the Rectangle at the specified location (X,Y) with the specified dimensions (W,H).
    
    Parameters:
    X - the specified X coordinate
    Y - the specified Y coordinate
    W - the width of the Rectangle
    H - the height of the Rectangle
    
    Returns:
    true if the Rectangle specified by (X, Y, W, H) is entirely enclosed inside this Rectangle; false otherwise.
    Since:
    
    1.1
  - inside
```
@Deprecated
public boolean inside(int X,
                        int Y)
```
    Deprecated. As of JDK version 1.1, replaced by contains(int, int).
    
    Checks whether or not this Rectangle contains the point at the specified location (X,Y).
    
    Parameters:
    X - the specified X coordinate
    Y - the specified Y coordinate
    
    Returns:
    true if the point (X,Y) is inside this Rectangle; false otherwise.
  - intersects
```
public boolean intersects(Rectangle r)
```
    Determines whether or not this Rectangle and the specified Rectangle intersect. Two rectangles intersect if their intersection is nonempty.
    
    Parameters:
    r - the specified Rectangle
    
    Returns:
    true if the specified Rectangle and this Rectangle intersect; false otherwise.
  - intersection
```
public Rectangle intersection(Rectangle r)
```
    Computes the intersection of this Rectangle with the specified Rectangle. Returns a new Rectangle that represents the intersection of the two rectangles. If the two rectangles do not intersect, the result will be an empty rectangle.
    
    Parameters:
    r - the specified Rectangle
    
    Returns:
    the largest Rectangle contained in both the specified Rectangle and in this Rectangle; or if the rectangles do not intersect, an empty rectangle.
  - union
```
public Rectangle union(Rectangle r)
```
    Computes the union of this Rectangle with the specified Rectangle. Returns a new Rectangle that represents the union of the two rectangles.
    If either Rectangle has any dimension less than zero the rules for non-existant rectangles apply. If only one has a dimension less than zero, then the result will be a copy of the other Rectangle. If both have dimension less than zero, then the result will have at least one dimension less than zero.
    If the resulting Rectangle would have a dimension too large to be expressed as an int, the result will have a dimension of Integer.MAX_VALUE along that dimension.
    
    Parameters:
    r - the specified Rectangle
    
    Returns:
    the smallest Rectangle containing both the specified Rectangle and this Rectangle.
  - add
```
public void add(int newx,
       int newy)
```
    Adds a point, specified by the integer arguments newx,newy to the bounds of this Rectangle.
    If this Rectangle has any dimension less than zero, the rules for non-existant rectangles apply. In that case, the new bounds of this Rectangle will have a location equal to the specified coordinates and width and height equal to zero.
    After adding a point, a call to contains with the added point as an argument does not necessarily return true. The contains method does not return true for points on the right or bottom edges of a Rectangle. Therefore, if the added point falls on the right or bottom edge of the enlarged Rectangle, contains returns false for that point. If the specified point must be contained within the new Rectangle, a 1x1 rectangle should be added instead:
```
     r.add(newx, newy, 1, 1);
 
```
    Parameters:
    newx - the X coordinate of the new point
    newy - the Y coordinate of the new point
  - add
```
public void add(Point pt)
```
    Adds the specified Point to the bounds of this Rectangle.
    If this Rectangle has any dimension less than zero, the rules for non-existant rectangles apply. In that case, the new bounds of this Rectangle will have a location equal to the coordinates of the specified Point and width and height equal to zero.
    After adding a Point, a call to contains with the added Point as an argument does not necessarily return true. The contains method does not return true for points on the right or bottom edges of a Rectangle. Therefore if the added Point falls on the right or bottom edge of the enlarged Rectangle, contains returns false for that Point. If the specified point must be contained within the new Rectangle, a 1x1 rectangle should be added instead:
```
     r.add(pt.x, pt.y, 1, 1);
 
```
    Parameters:
    pt - the new Point to add to this Rectangle
  - add
```
public void add(Rectangle r)
```
    Adds a Rectangle to this Rectangle. The resulting Rectangle is the union of the two rectangles.
    If either Rectangle has any dimension less than 0, the result will have the dimensions of the other Rectangle. If both Rectangles have at least one dimension less than 0, the result will have at least one dimension less than 0.
    If either Rectangle has one or both dimensions equal to 0, the result along those axes with 0 dimensions will be equivalent to the results obtained by adding the corresponding origin coordinate to the result rectangle along that axis, similar to the operation of the add(Point) method, but contribute no further dimension beyond that.
    If the resulting Rectangle would have a dimension too large to be expressed as an int, the result will have a dimension of Integer.MAX_VALUE along that dimension.
    
    Parameters:
    r - the specified Rectangle
  - grow
```
public void grow(int h,
        int v)
```
    Resizes the Rectangle both horizontally and vertically.
    This method modifies the Rectangle so that it is h units larger on both the left and right side, and v units larger at both the top and bottom.
    The new Rectangle has (x - h, y - v) as its upper-left corner, width of (width + 2h), and a height of (height + 2v).
    If negative values are supplied for h and v, the size of the Rectangle decreases accordingly. The grow method will check for integer overflow and underflow, but does not check whether the resulting values of width and height grow from negative to non-negative or shrink from non-negative to negative.
    
    Parameters:
    h - the horizontal expansion
    v - the vertical expansion
  - isEmpty
```
public boolean isEmpty()
```
    Determines whether the RectangularShape is empty. When the RectangularShape is empty, it encloses no area.
    
    Specified by:
    
    isEmpty in class RectangularShape
    
    Returns:
    true if the RectangularShape is empty; false otherwise.
    Since:
    
    1.2
  - outcode
```
public int outcode(double x,
          double y)
```
    Determines where the specified coordinates lie with respect to this Rectangle2D. This method computes a binary OR of the appropriate mask values indicating, for each side of this Rectangle2D, whether or not the specified coordinates are on the same side of the edge as the rest of this Rectangle2D.
    
    Specified by:
    
    outcode in class Rectangle2D
    
    Parameters:
    x - the specified X coordinate
    y - the specified Y coordinate
    
    Returns:
    the logical OR of all appropriate out codes.
    Since:
    
    1.2
    
    See Also:
    Rectangle2D.OUT_LEFT, Rectangle2D.OUT_TOP, Rectangle2D.OUT_RIGHT, Rectangle2D.OUT_BOTTOM
  - createIntersection
```
public Rectangle2D createIntersection(Rectangle2D r)
```
    Returns a new Rectangle2D object representing the intersection of this Rectangle2D with the specified Rectangle2D.
    
    Specified by:
    
    createIntersection in class Rectangle2D
    
    Parameters:
    r - the Rectangle2D to be intersected with this Rectangle2D
    
    Returns:
    the largest Rectangle2D contained in both the specified Rectangle2D and in this Rectangle2D.
    Since:
    
    1.2
  - createUnion
```
public Rectangle2D createUnion(Rectangle2D r)
```
    Returns a new Rectangle2D object representing the union of this Rectangle2D with the specified Rectangle2D.
    
    Specified by:
    
    createUnion in class Rectangle2D
    
    Parameters:
    r - the Rectangle2D to be combined with this Rectangle2D
    
    Returns:
    the smallest Rectangle2D containing both the specified Rectangle2D and this Rectangle2D.
    Since:
    
    1.2
  - equals
```
public boolean equals(Object obj)
```
    Checks whether two rectangles are equal.
    The result is true if and only if the argument is not null and is a Rectangle object that has the same upper-left corner, width, and height as this Rectangle.
    
    Overrides:
    
    equals in class Rectangle2D
    
    Parameters:
    obj - the Object to compare with this Rectangle
    
    Returns:
    true if the objects are equal; false otherwise.
    See Also:
    Object.hashCode(), HashMap
  - toString
```
public String toString()
```
    Returns a String representing this Rectangle and its values.
    
    Overrides:
    
    toString in class Object
    
    Returns:
    a String representing this Rectangle object's coordinate and size values.

Представьте ошибку или функцию
For further API reference and developer documentation, see Java SE Documentation. That documentation contains more detailed, developer-targeted descriptions, with conceptual overviews, definitions of terms, workarounds, and working code examples.
Copyright © 1993, 2011, Oracle and/or its affiliates. All rights reserved.

Прямоугольник класса

Nested Class Summary

Nested classes/interfaces inherited from class java.awt.geom.Rectangle2D

Field Summary

Fields inherited from class java.awt.geom.Rectangle2D

Constructor Summary

Method Summary

Methods inherited from class java.awt.geom.Rectangle2D

Methods inherited from class java.awt.geom.RectangularShape

Methods inherited from class java.lang.Object

Methods inherited from interface java.awt.Shape

Field Detail

x

y

width

height

Constructor Detail

Rectangle

Rectangle

Rectangle

Rectangle

Rectangle

Rectangle

Rectangle

Method Detail

getX

getY

getWidth

getHeight

getBounds

getBounds2D

setBounds

setBounds

setRect

reshape

getLocation

setLocation

setLocation

move

translate

getSize

setSize

setSize

resize

contains

contains

contains

contains

inside

intersects

intersection

union

add

add

add

grow

isEmpty

outcode

createIntersection

createUnion

equals

toString