|
|
Эта страница руководства для версии 10.9 Mac OS XЕсли Вы выполняете различную версию Mac OS X, просматриваете документацию локально:
Читать страницы руководстваСтраницы руководства предназначаются как справочник для людей, уже понимающих технологию.
|
curl(1) Curl Manual curl(1)
NAME
curl - transfer a URL
SYNOPSIS
curl [options] [URL...]
DESCRIPTION
curl is a tool to transfer data from or to a server, using one of the supported protocols (DICT,
FILE, FTP, FTPS, GOPHER, HTTP, HTTPS, IMAP, IMAPS, LDAP, LDAPS, POP3, POP3S, RTMP, RTSP, SCP, SFTP,
SMTP, SMTPS, TELNET and TFTP). The command is designed to work without user interaction.
curl offers a busload of useful tricks like proxy support, user authentication, FTP upload, HTTP
post, SSL connections, cookies, file transfer resume, Metalink, and more. As you will see below, the
number of features will make your head spin!
curl is powered by libcurl for all transfer-related features. See libcurl(3) for details.
URL
The URL syntax is protocol-dependent. You'll find a detailed description in RFC 3986.
You can specify multiple URLs or parts of URLs by writing part sets within braces as in:
http://site.{one,two,three}.com
or you can get sequences of alphanumeric series by using [] as in:
ftp://ftp.numericals.com/file[1-100].txt
ftp://ftp.numericals.com/file[001-100].txt (with leading zeros)
ftp://ftp.letters.com/file[a-z].txt
Nested sequences are not supported, but you can use several ones next to each other:
http://any.org/archive[1996-1999]/vol[1-4]/part{a,b,c}.html
You can specify any amount of URLs on the command line. They will be fetched in a sequential manner
in the specified order.
You can specify a step counter for the ranges to get every Nth number or letter:
http://www.numericals.com/file[1-100:10].txt
http://www.letters.com/file[a-z:2].txt
If you specify URL without protocol:// prefix, curl will attempt to guess what protocol you might
want. It will then default to HTTP but try other protocols based on often-used host name prefixes.
For example, for host names starting with "ftp." curl will assume you want to speak FTP.
curl will do its best to use what you pass to it as a URL. It is not trying to validate it as a syn-tactically syntactically
tactically correct URL by any means but is instead very liberal with what it accepts.
curl will attempt to re-use connections for multiple file transfers, so that getting many files from
the same server will not do multiple connects / handshakes. This improves speed. Of course this is
only done on files specified on a single command line and cannot be used between separate curl
invokes.
PROGRESS METER
curl normally displays a progress meter during operations, indicating the amount of transferred data,
transfer speeds and estimated time left, etc.
curl displays this data to the terminal by default, so if you invoke curl to do an operation and it
is about to write data to the terminal, it disables the progress meter as otherwise it would mess up
the output mixing progress meter and response data.
If you want a progress meter for HTTP POST or PUT requests, you need to redirect the response output
to a file, using shell redirect (>), -o [file] or similar.
It is not the same case for FTP upload as that operation does not spit out any response data to the
terminal.
If you prefer a progress "bar" instead of the regular meter, -# is your friend.
OPTIONS
In general, all boolean options are enabled with --option and yet again disabled with --no-option.
That is, you use the exact same option name but prefix it with "no-". However, in this list we mostly
only list and show the --option version of them. (This concept with --no options was added in 7.19.0.
Previously most options were toggled on/off on repeated use of the same command line option.)
-#, --progress-bar
Make curl display progress as a simple progress bar instead of the standard, more informa-tional, informational,
tional, meter.
-0, --http1.0
(HTTP) Forces curl to issue its requests using HTTP 1.0 instead of using its internally pre-ferred: preferred:
ferred: HTTP 1.1.
-1, --tlsv1
(SSL) Forces curl to use TLS version 1 when negotiating with a remote TLS server.
-2, --sslv2
(SSL) Forces curl to use SSL version 2 when negotiating with a remote SSL server.
-3, --sslv3
(SSL) Forces curl to use SSL version 3 when negotiating with a remote SSL server.
-4, --ipv4
If curl is capable of resolving an address to multiple IP versions (which it is if it is
IPv6-capable), this option tells curl to resolve names to IPv4 addresses only.
-6, --ipv6
If curl is capable of resolving an address to multiple IP versions (which it is if it is
IPv6-capable), this option tells curl to resolve names to IPv6 addresses only.
-a, --append
(FTP/SFTP) When used in an upload, this will tell curl to append to the target file instead of
overwriting it. If the file doesn't exist, it will be created. Note that this flag is ignored
by some SSH servers (including OpenSSH).
-A, --user-agent <agent string>
(HTTP) Specify the User-Agent string to send to the HTTP server. Some badly done CGIs fail if
this field isn't set to "Mozilla/4.0". To encode blanks in the string, surround the string
with single quote marks. This can also be set with the -H, --header option of course.
If this option is used several times, the last one will be used.
--anyauth
(HTTP) Tells curl to figure out authentication method by itself, and use the most secure one
the remote site claims to support. This is done by first doing a request and checking the
response-headers, thus possibly inducing an extra network round-trip. This is used instead of
setting a specific authentication method, which you can do with --basic, --digest, --ntlm, and
--negotiate.
Note that using --anyauth is not recommended if you do uploads from stdin, since it may
require data to be sent twice and then the client must be able to rewind. If the need should
arise when uploading from stdin, the upload operation will fail.
-b, --cookie <name=data>
(HTTP) Pass the data to the HTTP server as a cookie. It is supposedly the data previously
received from the server in a "Set-Cookie:" line. The data should be in the format
"NAME1=VALUE1; NAME2=VALUE2".
If no '=' symbol is used in the line, it is treated as a filename to use to read previously
stored cookie lines from, which should be used in this session if they match. Using this
method also activates the "cookie parser" which will make curl record incoming cookies too,
which may be handy if you're using this in combination with the -L, --location option. The
file format of the file to read cookies from should be plain HTTP headers or the
Netscape/Mozilla cookie file format.
NOTE that the file specified with -b, --cookie is only used as input. No cookies will be
stored in the file. To store cookies, use the -c, --cookie-jar option or you could even save
the HTTP headers to a file using -D, --dump-header!
If this option is used several times, the last one will be used.
-B, --use-ascii
(FTP/LDAP) Enable ASCII transfer. For FTP, this can also be enforced by using an URL that ends
with ";type=A". This option causes data sent to stdout to be in text mode for win32 systems.
--basic
(HTTP) Tells curl to use HTTP Basic authentication. This is the default and this option is
usually pointless, unless you use it to override a previously set option that sets a different
authentication method (such as --ntlm, --digest, or --negotiate).
-c, --cookie-jar <file name>
(HTTP) Specify to which file you want curl to write all cookies after a completed operation.
Curl writes all cookies previously read from a specified file as well as all cookies received
from remote server(s). If no cookies are known, no file will be written. The file will be
written using the Netscape cookie file format. If you set the file name to a single dash, "-",
the cookies will be written to stdout.
This command line option will activate the cookie engine that makes curl record and use cook-ies. cookies.
ies. Another way to activate it is to use the -b, --cookie option.
If the cookie jar can't be created or written to, the whole curl operation won't fail or even
report an error clearly. Using -v will get a warning displayed, but that is the only visible
feedback you get about this possibly lethal situation.
If this option is used several times, the last specified file name will be used.
-C, --continue-at <offset>
Continue/Resume a previous file transfer at the given offset. The given offset is the exact
number of bytes that will be skipped, counting from the beginning of the source file before it
is transferred to the destination. If used with uploads, the FTP server command SIZE will not
be used by curl.
Use "-C -" to tell curl to automatically find out where/how to resume the transfer. It then
uses the given output/input files to figure that out.
If this option is used several times, the last one will be used.
--ciphers <list of ciphers>
(SSL) Specifies which ciphers to use in the connection. The list of ciphers must specify valid
ciphers. Read up on SSL cipher list details on this URL:
http://www.openssl.org/docs/apps/ciphers.html
NSS ciphers are done differently than OpenSSL and GnuTLS. The full list of NSS ciphers is in
the NSSCipherSuite entry at this URL: http://git .fedora-
hosted.org/cgit/mod_nss.git/plain/docs/mod_nss.html#Directives
If this option is used several times, the last one will be used.
--compressed
(HTTP) Request a compressed response using one of the algorithms curl supports, and save the
uncompressed document. If this option is used and the server sends an unsupported encoding,
curl will report an error.
--connect-timeout <seconds>
Maximum time in seconds that you allow the connection to the server to take. This only limits
the connection phase, once curl has connected this option is of no more use. See also the -m,
--max-time option.
If this option is used several times, the last one will be used.
--create-dirs
When used in conjunction with the -o option, curl will create the necessary local directory
hierarchy as needed. This option creates the dirs mentioned with the -o option, nothing else.
If the -o file name uses no dir or if the dirs it mentions already exist, no dir will be cre-ated. created.
ated.
To create remote directories when using FTP or SFTP, try --ftp-create-dirs.
--crlf (FTP) Convert LF to CRLF in upload. Useful for MVS (OS/390).
--crlfile <file>
(HTTPS/FTPS) Provide a file using PEM format with a Certificate Revocation List that may spec-ify specify
ify peer certificates that are to be considered revoked.
If this option is used several times, the last one will be used.
(Added in 7.19.7)
-d, --data <data>
(HTTP) Sends the specified data in a POST request to the HTTP server, in the same way that a
browser does when a user has filled in an HTML form and presses the submit button. This will
cause curl to pass the data to the server using the content-type application/x-www-form-urlen-coded. application/x-www-form-urlencoded.
coded. Compare to -F, --form.
-d, --data is the same as --data-ascii. To post data purely binary, you should instead use the
--data-binary option. To URL-encode the value of a form field you may use --data-urlencode.
If any of these options is used more than once on the same command line, the data pieces spec-ified specified
ified will be merged together with a separating &-symbol. Thus, using '-d name=daniel -d
skill=lousy' would generate a post chunk that looks like 'name=daniel&skill=lousy'.
If you start the data with the letter @, the rest should be a file name to read the data from,
or - if you want curl to read the data from stdin. The contents of the file must already be
URL-encoded. Multiple files can also be specified. Posting data from a file named 'foobar'
would thus be done with --data @foobar.
-D, --dump-header <file>
Write the protocol headers to the specified file.
This option is handy to use when you want to store the headers that an HTTP site sends to you.
Cookies from the headers could then be read in a second curl invocation by using the -b,
--cookie option! The -c, --cookie-jar option is however a better way to store cookies.
When used in FTP, the FTP server response lines are considered being "headers" and thus are
saved there.
If this option is used several times, the last one will be used.
--data-ascii <data>
See -d, --data.
--data-binary <data>
(HTTP) This posts data exactly as specified with no extra processing whatsoever.
If you start the data with the letter @, the rest should be a filename. Data is posted in a
similar manner as --data-ascii does, except that newlines are preserved and conversions are
never done.
If this option is used several times, the ones following the first will append data as
described in -d, --data.
--data-urlencode <data>
(HTTP) This posts data, similar to the other --data options with the exception that this per-forms performs
forms URL-encoding. (Added in 7.18.0)
To be CGI-compliant, the <data> part should begin with a name followed by a separator and a
content specification. The <data> part can be passed to curl using one of the following syn-taxes: syntaxes:
taxes:
content
This will make curl URL-encode the content and pass that on. Just be careful so that
the content doesn't contain any = or @ symbols, as that will then make the syntax match
one of the other cases below!
=content
This will make curl URL-encode the content and pass that on. The preceding = symbol is
not included in the data.
name=content
This will make curl URL-encode the content part and pass that on. Note that the name
part is expected to be URL-encoded already.
@filename
This will make curl load data from the given file (including any newlines), URL-encode
that data and pass it on in the POST.
name@filename
This will make curl load data from the given file (including any newlines), URL-encode
that data and pass it on in the POST. The name part gets an equal sign appended,
resulting in name=urlencoded-file-content. Note that the name is expected to be URL-encoded URLencoded
encoded already.
--delegation LEVEL
Set LEVEL to tell the server what it is allowed to delegate when it comes to user credentials.
Used with GSS/kerberos.
none Don't allow any delegation.
policy Delegates if and only if the OK-AS-DELEGATE flag is set in the Kerberos service ticket,
which is a matter of realm policy.
always Unconditionally allow the server to delegate.
--digest
(HTTP) Enables HTTP Digest authentication. This is an authentication scheme that prevents the
password from being sent over the wire in clear text. Use this in combination with the normal
-u, --user option to set user name and password. See also --ntlm, --negotiate and --anyauth
for related options.
If this option is used several times, only the first one is used.
--disable-eprt
(FTP) Tell curl to disable the use of the EPRT and LPRT commands when doing active FTP trans-fers. transfers.
fers. Curl will normally always first attempt to use EPRT, then LPRT before using PORT, but
with this option, it will use PORT right away. EPRT and LPRT are extensions to the original
FTP protocol, and may not work on all servers, but they enable more functionality in a better
way than the traditional PORT command.
--eprt can be used to explicitly enable EPRT again and --no-eprt is an alias for --disable-eprt. --disableeprt.
eprt.
Disabling EPRT only changes the active behavior. If you want to switch to passive mode you
need to not use -P, --ftp-port or force it with --ftp-pasv.
--disable-epsv
(FTP) Tell curl to disable the use of the EPSV command when doing passive FTP transfers. Curl
will normally always first attempt to use EPSV before PASV, but with this option, it will not
try using EPSV.
--epsv can be used to explicitly enable EPSV again and --no-epsv is an alias for --disable-epsv. --disableepsv.
epsv.
Disabling EPSV only changes the passive behavior. If you want to switch to active mode you
need to use -P, --ftp-port.
-e, --referer <URL>
(HTTP) Sends the "Referer Page" information to the HTTP server. This can also be set with the
-H, --header flag of course. When used with -L, --location you can append ";auto" to the
--referer URL to make curl automatically set the previous URL when it follows a Location:
header. The ";auto" string can be used alone, even if you don't set an initial --referer.
If this option is used several times, the last one will be used.
-E, --cert <certificate[:password]>
(SSL) Tells curl to use the specified client certificate file when getting a file with HTTPS,
FTPS or another SSL-based protocol. The certificate must be in PEM format. If the optional
password isn't specified, it will be queried for on the terminal. Note that this option
assumes a "certificate" file that is the private key and the private certificate concatenated!
See --cert and --key to specify them independently.
If curl is built against the NSS SSL library then this option can tell curl the nickname of
the certificate to use within the NSS database defined by the environment variable SSL_DIR (or
by default /etc/pki/nssdb). If the NSS PEM PKCS#11 module (libnsspem.so) is available then PEM
files may be loaded. If you want to use a file from the current directory, please precede it
with "./" prefix, in order to avoid confusion with a nickname.
If this option is used several times, the last one will be used.
--engine <name>
Select the OpenSSL crypto engine to use for cipher operations. Use --engine list to print a
list of build-time supported engines. Note that not all (or none) of the engines may be avail-able available
able at run-time.
--environment
(RISC OS ONLY) Sets a range of environment variables, using the names the -w option supports,
to allow easier extraction of useful information after having run curl.
--egd-file <file>
(SSL) Specify the path name to the Entropy Gathering Daemon socket. The socket is used to seed
the random engine for SSL connections. See also the --random-file option.
--cert-type <type>
(SSL) Tells curl what certificate type the provided certificate is in. PEM, DER and ENG are
recognized types. If not specified, PEM is assumed.
If this option is used several times, the last one will be used.
--cacert <CA certificate>
(SSL) Tells curl to use the specified certificate file to verify the peer. The file may con-tain contain
tain multiple CA certificates. The certificate(s) must be in PEM format. Normally curl is
built to use a default file for this, so this option is typically used to alter that default
file.
curl recognizes the environment variable named 'CURL_CA_BUNDLE' if it is set, and uses the
given path as a path to a CA cert bundle. This option overrides that variable.
The windows version of curl will automatically look for a CA certs file named 'curl-ca-bun-dle.crt', 'curl-ca-bundle.crt',
dle.crt', either in the same directory as curl.exe, or in the Current Working Directory, or in
any folder along your PATH.
If curl is built against the NSS SSL library, the NSS PEM PKCS#11 module (libnsspem.so) needs
to be available for this option to work properly.
If this option is used several times, the last one will be used.
--capath <CA certificate directory>
(SSL) Tells curl to use the specified certificate directory to verify the peer. Multiple paths
can be provided by separating them with ":" (e.g. "path1:path2:path3"). The certificates must
be in PEM format, and if curl is built against OpenSSL, the directory must have been processed
using the c_rehash utility supplied with OpenSSL. Using --capath can allow OpenSSL-powered
curl to make SSL-connections much more efficiently than using --cacert if the --cacert file
contains many CA certificates.
If this option is set, the default capath value will be ignored, and if it is used several
times, the last one will be used.
-f, --fail
(HTTP) Fail silently (no output at all) on server errors. This is mostly done to better enable
scripts etc to better deal with failed attempts. In normal cases when an HTTP server fails to
deliver a document, it returns an HTML document stating so (which often also describes why and
more). This flag will prevent curl from outputting that and return error 22.
This method is not fail-safe and there are occasions where non-successful response codes will
slip through, especially when authentication is involved (response codes 401 and 407).
-F, --form <name=content>
(HTTP) This lets curl emulate a filled-in form in which a user has pressed the submit button.
This causes curl to POST data using the Content-Type multipart/form-data according to RFC
2388. This enables uploading of binary files etc. To force the 'content' part to be a file,
prefix the file name with an @ sign. To just get the content part from a file, prefix the file
name with the symbol <. The difference between @ and < is then that @ makes a file get
attached in the post as a file upload, while the < makes a text field and just get the con-
tents for that text field from a file.
Example, to send your password file to the server, where 'password' is the name of the form-field formfield
field to which /etc/passwd will be the input:
curl -F password=@/etc/passwd www.mypasswords.com
To read content from stdin instead of a file, use - as the filename. This goes for both @ and
< constructs.
You can also tell curl what Content-Type to use by using 'type=', in a manner similar to:
curl -F "web=@index.html;type=text/html" url.com
or
curl -F "name=daniel;type=text/foo" url.com
You can also explicitly change the name field of a file upload part by setting filename=, like
this:
curl -F "file=@localfile;filename=nameinpost" url.com
If filename/path contains ',' or ';', it must be quoted by double-quotes like:
curl -F "file=@\"localfile\";filename=\"nameinpost\"" url.com
or
curl -F 'file=@"localfile";filename="nameinpost"' url.com
Note that if a filename/path is quoted by double-quotes, any double-quote or backslash within
the filename must be escaped by backslash.
See further examples and details in the MANUAL.
This option can be used multiple times.
--ftp-account [data]
(FTP) When an FTP server asks for "account data" after user name and password has been pro-
vided, this data is sent off using the ACCT command. (Added in 7.13.0)
If this option is used several times, the last one will be used.
--ftp-alternative-to-user <command>
(FTP) If authenticating with the USER and PASS commands fails, send this command. When con-necting connecting
necting to Tumbleweed's Secure Transport server over FTPS using a client certificate, using
"SITE AUTH" will tell the server to retrieve the username from the certificate. (Added in
7.15.5)
--ftp-create-dirs
(FTP/SFTP) When an FTP or SFTP URL/operation uses a path that doesn't currently exist on the
server, the standard behavior of curl is to fail. Using this option, curl will instead attempt
to create missing directories.
--ftp-method [method]
(FTP) Control what method curl should use to reach a file on an FTP(S) server. The method
argument should be one of the following alternatives:
multicwd
curl does a single CWD operation for each path part in the given URL. For deep hierar-chies hierarchies
chies this means very many commands. This is how RFC 1738 says it should be done. This
is the default but the slowest behavior.
nocwd curl does no CWD at all. curl will do SIZE, RETR, STOR etc and give a full path to the
server for all these commands. This is the fastest behavior.
singlecwd
curl does one CWD with the full target directory and then operates on the file "nor-mally" "normally"
mally" (like in the multicwd case). This is somewhat more standards compliant than
'nocwd' but without the full penalty of 'multicwd'.
(Added in 7.15.1)
--ftp-pasv
(FTP) Use passive mode for the data connection. Passive is the internal default behavior, but
using this option can be used to override a previous -P/-ftp-port option. (Added in 7.11.0)
If this option is used several times, only the first one is used. Undoing an enforced passive
really isn't doable but you must then instead enforce the correct -P, --ftp-port again.
Passive mode means that curl will try the EPSV command first and then PASV, unless --disable-epsv --disableepsv
epsv is used.
--ftp-skip-pasv-ip
(FTP) Tell curl to not use the IP address the server suggests in its response to curl's PASV
command when curl connects the data connection. Instead curl will re-use the same IP address
it already uses for the control connection. (Added in 7.14.2)
This option has no effect if PORT, EPRT or EPSV is used instead of PASV.
--ftp-pret
(FTP) Tell curl to send a PRET command before PASV (and EPSV). Certain FTP servers, mainly
drftpd, require this non-standard command for directory listings as well as up and downloads
in PASV mode. (Added in 7.20.x)
--ftp-ssl-ccc
(FTP) Use CCC (Clear Command Channel) Shuts down the SSL/TLS layer after authenticating. The
rest of the control channel communication will be unencrypted. This allows NAT routers to fol-low follow
low the FTP transaction. The default mode is passive. See --ftp-ssl-ccc-mode for other modes.
(Added in 7.16.1)
--ftp-ssl-ccc-mode [active/passive]
(FTP) Use CCC (Clear Command Channel) Sets the CCC mode. The passive mode will not initiate
the shutdown, but instead wait for the server to do it, and will not reply to the shutdown
from the server. The active mode initiates the shutdown and waits for a reply from the server.
(Added in 7.16.2)
--ftp-ssl-control
(FTP) Require SSL/TLS for the FTP login, clear for transfer. Allows secure authentication,
but non-encrypted data transfers for efficiency. Fails the transfer if the server doesn't
support SSL/TLS. (Added in 7.16.0) that can still be used but will be removed in a future
version.
--form-string <name=string>
(HTTP) Similar to --form except that the value string for the named parameter is used liter-ally. literally.
ally. Leading '@' and '<' characters, and the ';type=' string in the value have no special
meaning. Use this in preference to --form if there's any possibility that the string value may
accidentally trigger the '@' or '<' features of --form.
-g, --globoff
This option switches off the "URL globbing parser". When you set this option, you can specify
URLs that contain the letters {}[] without having them being interpreted by curl itself. Note
that these letters are not normal legal URL contents but they should be encoded according to
the URI standard.
-G, --get
When used, this option will make all data specified with -d, --data or --data-binary to be
used in an HTTP GET request instead of the POST request that otherwise would be used. The data
will be appended to the URL with a '?' separator.
If used in combination with -I, the POST data will instead be appended to the URL with a HEAD
request.
If this option is used several times, only the first one is used. This is because undoing a
GET doesn't make sense, but you should then instead enforce the alternative method you prefer.
-H, --header <header>
(HTTP) Extra header to use when getting a web page. You may specify any number of extra head-ers. headers.
ers. Note that if you should add a custom header that has the same name as one of the internal
ones curl would use, your externally set header will be used instead of the internal one. This
allows you to make even trickier stuff than curl would normally do. You should not replace
internally set headers without knowing perfectly well what you're doing. Remove an internal
header by giving a replacement without content on the right side of the colon, as in: -H
"Host:". If you send the custom header with no-value then its header must be terminated with a
semicolon, such as -H "X-Custom-Header;" to send "X-Custom-Header:".
curl will make sure that each header you add/replace is sent with the proper end-of-line
marker, you should thus not add that as a part of the header content: do not add newlines or
carriage returns, they will only mess things up for you.
See also the -A, --user-agent and -e, --referer options.
This option can be used multiple times to add/replace/remove multiple headers.
--hostpubmd5 <md5>
(SCP/SFTP) Pass a string containing 32 hexadecimal digits. The string should be the 128 bit
MD5 checksum of the remote host's public key, curl will refuse the connection with the host
unless the md5sums match. (Added in 7.17.1)
--ignore-content-length
(HTTP) Ignore the Content-Length header. This is particularly useful for servers running
Apache 1.x, which will report incorrect Content-Length for files larger than 2 gigabytes.
-i, --include
(HTTP) Include the HTTP-header in the output. The HTTP-header includes things like server-name, servername,
name, date of the document, HTTP-version and more...
-I, --head
(HTTP/FTP/FILE) Fetch the HTTP-header only! HTTP-servers feature the command HEAD which this
uses to get nothing but the header of a document. When used on an FTP or FILE file, curl dis-plays displays
plays the file size and last modification time only.
--interface <name>
Perform an operation using a specified interface. You can enter interface name, IP address or
host name. An example could look like:
curl --interface eth0:1 http://www.netscape.com/
If this option is used several times, the last one will be used.
-j, --junk-session-cookies
(HTTP) When curl is told to read cookies from a given file, this option will make it discard
all "session cookies". This will basically have the same effect as if a new session is
started. Typical browsers always discard session cookies when they're closed down.
-J, --remote-header-name
(HTTP) This option tells the -O, --remote-name option to use the server-specified Content-Dis-position Content-Disposition
position filename instead of extracting a filename from the URL.
-k, --insecure
(SSL) This option explicitly allows curl to perform "insecure" SSL connections and transfers.
All SSL connections are attempted to be made secure by using the CA certificate bundle
installed by default. This makes all connections considered "insecure" fail unless -k, --inse-cure --insecure
cure is used.
See this online resource for further details: http://curl.haxx.se/docs/sslcerts.html
-K, --config <config file>
Specify which config file to read curl arguments from. The config file is a text file in which
command line arguments can be written which then will be used as if they were written on the
actual command line. Options and their parameters must be specified on the same config file
line, separated by whitespace, colon, the equals sign or any combination thereof (however, the
preferred separator is the equals sign). If the parameter is to contain whitespace, the param-eter parameter
eter must be enclosed within quotes. Within double quotes, the following escape sequences are
available: \\, \", \t, \n, \r and \v. A backslash preceding any other letter is ignored. If
the first column of a config line is a '#' character, the rest of the line will be treated as
a comment. Only write one option per physical line in the config file.
Specify the filename to -K, --config as '-' to make curl read the file from stdin.
Note that to be able to specify a URL in the config file, you need to specify it using the
--url option, and not by simply writing the URL on its own line. So, it could look similar to
this:
url = "http://curl.haxx.se/docs/"
Long option names can optionally be given in the config file without the initial double
dashes.
When curl is invoked, it always (unless -q is used) checks for a default config file and uses
it if found. The default config file is checked for in the following places in this order:
1) curl tries to find the "home dir": It first checks for the CURL_HOME and then the HOME
environment variables. Failing that, it uses getpwuid() on UNIX-like systems (which returns
the home dir given the current user in your system). On Windows, it then checks for the APP-DATA APPDATA
DATA variable, or as a last resort the '%USERPROFILE%\Application Data'.
2) On windows, if there is no _curlrc file in the home dir, it checks for one in the same dir
the curl executable is placed. On UNIX-like systems, it will simply try to load .curlrc from
the determined home dir.
# --- Example file ---# --#
# this is a comment
url = "curl.haxx.se"
output = "curlhere.html"
user-agent = "superagent/1.0"
# and fetch another URL too
url = "curl.haxx.se/docs/manpage.html"
-O
referer = "http://nowhereatall.com/"
# --- End of example file ---This --This
This option can be used multiple times to load multiple config files.
--keepalive-time <seconds>
This option sets the time a connection needs to remain idle before sending keepalive probes
and the time between individual keepalive probes. It is currently effective on operating sys-tems systems
tems offering the TCP_KEEPIDLE and TCP_KEEPINTVL socket options (meaning Linux, recent AIX,
HP-UX and more). This option has no effect if --no-keepalive is used. (Added in 7.18.0)
If this option is used several times, the last one will be used. If unspecified, the option
defaults to 60 seconds.
--key <key>
(SSL/SSH) Private key file name. Allows you to provide your private key in this separate file.
If this option is used several times, the last one will be used.
--key-type <type>
(SSL) Private key file type. Specify which type your --key provided private key is. DER, PEM,
and ENG are supported. If not specified, PEM is assumed.
If this option is used several times, the last one will be used.
--krb <level>
(FTP) Enable Kerberos authentication and use. The level must be entered and should be one of
'clear', 'safe', 'confidential', or 'private'. Should you use a level that is not one of
these, 'private' will instead be used.
This option requires a library built with kerberos4 or GSSAPI (GSS-Negotiate) support. This is
not very common. Use -V, --version to see if your curl supports it.
If this option is used several times, the last one will be used.
-l, --list-only
(FTP) When listing an FTP directory, this switch forces a name-only view. Especially useful
if you want to machine-parse the contents of an FTP directory since the normal directory view
doesn't use a standard look or format.
This option causes an FTP NLST command to be sent. Some FTP servers list only files in their
response to NLST; they do not include subdirectories and symbolic links.
-L, --location
(HTTP/HTTPS) If the server reports that the requested page has moved to a different location
(indicated with a Location: header and a 3XX response code), this option will make curl redo
the request on the new place. If used together with -i, --include or -I, --head, headers from
all requested pages will be shown. When authentication is used, curl only sends its creden-tials credentials
tials to the initial host. If a redirect takes curl to a different host, it won't be able to
intercept the user+password. See also --location-trusted on how to change this. You can limit
the amount of redirects to follow by using the --max-redirs option.
When curl follows a redirect and the request is not a plain GET (for example POST or PUT), it
will do the following request with a GET if the HTTP response was 301, 302, or 303. If the
response code was any other 3xx code, curl will re-send the following request using the same
unmodified method.
--libcurl <file>
Append this option to any ordinary curl command line, and you will get a libcurl-using C
source code written to the file that does the equivalent of what your command-line operation
does!
If this option is used several times, the last given file name will be used. (Added in 7.16.1)
--limit-rate <speed>
Specify the maximum transfer rate you want curl to use. This feature is useful if you have a
limited pipe and you'd like your transfer not to use your entire bandwidth.
The given speed is measured in bytes/second, unless a suffix is appended. Appending 'k' or
'K' will count the number as kilobytes, 'm' or M' makes it megabytes, while 'g' or 'G' makes
it gigabytes. Examples: 200K, 3m and 1G.
The given rate is the average speed counted during the entire transfer. It means that curl
might use higher transfer speeds in short bursts, but over time it uses no more than the given
rate.
If you also use the -Y, --speed-limit option, that option will take precedence and might crip-ple cripple
ple the rate-limiting slightly, to help keeping the speed-limit logic working.
If this option is used several times, the last one will be used.
--local-port <num>[-num]
Set a preferred number or range of local port numbers to use for the connection(s). Note that
port numbers by nature are a scarce resource that will be busy at times so setting this range
to something too narrow might cause unnecessary connection setup failures. (Added in 7.15.2)
--location-trusted
(HTTP/HTTPS) Like -L, --location, but will allow sending the name + password to all hosts that
the site may redirect to. This may or may not introduce a security breach if the site redi-rects redirects
rects you to a site to which you'll send your authentication info (which is plaintext in the
case of HTTP Basic authentication).
-m, --max-time <seconds>
Maximum time in seconds that you allow the whole operation to take. This is useful for pre-venting preventing
venting your batch jobs from hanging for hours due to slow networks or links going down. See
also the --connect-timeout option.
If this option is used several times, the last one will be used.
--mail-auth <address>
(SMTP) Specify a single address. This will be used to specify the authentication address
(identity) of a submitted message that is being relayed to another server.
(Added in 7.25.0)
--mail-from <address>
(SMTP) Specify a single address that the given mail should get sent from.
(Added in 7.20.0)
--max-filesize <bytes>
Specify the maximum size (in bytes) of a file to download. If the file requested is larger
than this value, the transfer will not start and curl will return with exit code 63.
NOTE: The file size is not always known prior to download, and for such files this option has
no effect even if the file transfer ends up being larger than this given limit. This concerns
both FTP and HTTP transfers.
--mail-rcpt <address>
(SMTP) Specify a single address that the given mail should get sent to. This option can be
used multiple times to specify many recipients.
(Added in 7.20.0)
--max-redirs <num>
Set maximum number of redirection-followings allowed. If -L, --location is used, this option
can be used to prevent curl from following redirections "in absurdum". By default, the limit
is set to 50 redirections. Set this option to -1 to make it limitless.
If this option is used several times, the last one will be used.
--metalink
This option can tell curl to parse and process a given URI as Metalink file (both version 3
and 4 (RFC 5854) are supported) and make use of the mirrors listed within for failover if
there are errors (such as the file or server not being available). It will also verify the
hash of the file after the download completes. The Metalink file itself is downloaded and pro-cessed processed
cessed in memory and not stored in the local file system.
Example to use a remote Metalink file:
curl --metalink http://www.example.com/example.metalink
To use a Metalink file in the local file system, use FILE protocol (file://):
curl --metalink file://example.metalink
Please note that if FILE protocol is disabled, there is no way to use a local Metalink file at
the time of this writing. Also note that if --metalink and --include are used together,
--include will be ignored. This is because including headers in the response will break Met-alink Metalink
alink parser and if the headers are included in the file described in Metalink file, hash
check will fail.
(Added in 7.27.0, if built against the libmetalink library.)
-n, --netrc
Makes curl scan the .netrc (_netrc on Windows) file in the user's home directory for login
name and password. This is typically used for FTP on UNIX. If used with HTTP, curl will enable
user authentication. See ftp(1) for details on the file format. Curl will not complain if that
file doesn't have the right permissions (it should not be either world- or group-readable).
The environment variable "HOME" is used to find the home directory.
A quick and very simple example of how to setup a .netrc to allow curl to FTP to the machine
host.domain.com with user name 'myself' and password 'secret' should look similar to:
machine host.domain.com login myself password secret
-N, --no-buffer
Disables the buffering of the output stream. In normal work situations, curl will use a stan-dard standard
dard buffered output stream that will have the effect that it will output the data in chunks,
not necessarily exactly when the data arrives. Using this option will disable that buffering.
Note that this is the negated option name documented. You can thus use --buffer to enforce the
buffering.
--netrc-file
This option is similar to --netrc, except that you provide the path (absolute or relative) to
the netrc file that Curl should use. You can only specify one netrc file per invocation. If
several --netrc-file options are provided, only the last one will be used. (Added in 7.21.5)
This option overrides any use of --netrc as they are mutually exclusive. It will also abide
by --netrc-optional if specified.
--netrc-optional
Very similar to --netrc, but this option makes the .netrc usage optional and not mandatory as
the --netrc option does.
--negotiate
(HTTP) Enables GSS-Negotiate authentication. The GSS-Negotiate method was designed by
Microsoft and is used in their web applications. It is primarily meant as a support for Ker-beros5 Kerberos5
beros5 authentication but may be also used along with another authentication method. For more
information see IETF draft draft-brezak-spnego-http-04.txt.
If you want to enable Negotiate for your proxy authentication, then use --proxy-negotiate.
This option requires a library built with GSSAPI support. This is not very common. Use -V,
--version to see if your version supports GSS-Negotiate.
When using this option, you must also provide a fake -u, --user option to activate the authen-tication authentication
tication code properly. Sending a '-u :' is enough as the user name and password from the -u
option aren't actually used.
If this option is used several times, only the first one is used.
--no-keepalive
Disables the use of keepalive messages on the TCP connection, as by default curl enables them.
Note that this is the negated option name documented. You can thus use --keepalive to enforce
keepalive.
--no-sessionid
(SSL) Disable curl's use of SSL session-ID caching. By default all transfers are done using
the cache. Note that while nothing should ever get hurt by attempting to reuse SSL session-IDs, sessionIDs,
IDs, there seem to be broken SSL implementations in the wild that may require you to disable
this in order for you to succeed. (Added in 7.16.0)
Note that this is the negated option name documented. You can thus use --sessionid to enforce
session-ID caching.
--noproxy <no-proxy-list>
Comma-separated list of hosts which do not use a proxy, if one is specified. The only wild-card wildcard
card is a single * character, which matches all hosts, and effectively disables the proxy.
Each name in this list is matched as either a domain which contains the hostname, or the host-name hostname
name itself. For example, local.com would match local.com, local.com:80, and www.local.com,
but not www.notlocal.com. (Added in 7.19.4).
--ntlm (HTTP) Enables NTLM authentication. The NTLM authentication method was designed by Microsoft
and is used by IIS web servers. It is a proprietary protocol, reverse-engineered by clever
people and implemented in curl based on their efforts. This kind of behavior should not be
endorsed, you should encourage everyone who uses NTLM to switch to a public and documented
authentication method instead, such as Digest.
If you want to enable NTLM for your proxy authentication, then use --proxy-ntlm.
This option requires a library built with SSL support. Use -V, --version to see if your curl
supports NTLM.
If this option is used several times, only the first one is used.
-o, --output <file>
Write output to <file> instead of stdout. If you are using {} or [] to fetch multiple docu-ments, documents,
ments, you can use '#' followed by a number in the <file> specifier. That variable will be
replaced with the current string for the URL being fetched. Like in:
curl http://{one,two}.site.com -o "file_#1.txt"
or use several variables like:
curl http://{site,host}.host[1-5].com -o "#1_#2"
You may use this option as many times as the number of URLs you have.
See also the --create-dirs option to create the local directories dynamically. Specifying the
output as '-' (a single dash) will force the output to be done to stdout.
-O, --remote-name
Write output to a local file named like the remote file we get. (Only the file part of the
remote file is used, the path is cut off.)
The remote file name to use for saving is extracted from the given URL, nothing else.
Consequentially, the file will be saved in the current working directory. If you want the file
saved in a different directory, make sure you change current working directory before you
invoke curl with the -O, --remote-name flag!
You may use this option as many times as the number of URLs you have.
-p, --proxytunnel
When an HTTP proxy is used (-x, --proxy), this option will cause non-HTTP protocols to attempt
to tunnel through the proxy instead of merely using it to do HTTP-like operations. The tunnel
approach is made with the HTTP proxy CONNECT request and requires that the proxy allows direct
connect to the remote port number curl wants to tunnel through to.
-P, --ftp-port <address>
(FTP) Reverses the default initiator/listener roles when connecting with FTP. This switch
makes curl use active mode. In practice, curl then tells the server to connect back to the
client's specified address and port, while passive mode asks the server to setup an IP address
and port for it to connect to. <address> should be one of:
interface
i.e "eth0" to specify which interface's IP address you want to use (Unix only)
IP address
i.e "192.168.10.1" to specify the exact IP address
host name
i.e "my.host.domain" to specify the machine
- make curl pick the same IP address that is already used for the control connection
If this option is used several times, the last one will be used. Disable the use of PORT with --ftp-pasv. --ftppasv.
pasv. Disable the attempt to use the EPRT command instead of PORT by using --disable-eprt. EPRT is
really PORT++.
Starting in 7.19.5, you can append ":[start]-[end]" to the right of the address, to tell curl what
TCP port range to use. That means you specify a port range, from a lower to a higher number. A single
number works as well, but do note that it increases the risk of failure since the port may not be
available.
--pass <phrase>
(SSL/SSH) Passphrase for the private key
If this option is used several times, the last one will be used.
--post301
(HTTP) Tells curl to respect RFC 2616/10.3.2 and not convert POST requests into GET requests
when following a 301 redirection. The non-RFC behaviour is ubiquitous in web browsers, so curl
does the conversion by default to maintain consistency. However, a server may require a POST
to remain a POST after such a redirection. This option is meaningful only when using -L,
--location (Added in 7.17.1)
--post302
(HTTP) Tells curl to respect RFC 2616/10.3.2 and not convert POST requests into GET requests
when following a 302 redirection. The non-RFC behaviour is ubiquitous in web browsers, so curl
does the conversion by default to maintain consistency. However, a server may require a POST
to remain a POST after such a redirection. This option is meaningful only when using -L,
--location (Added in 7.19.1)
--proto <protocols>
Tells curl to use the listed protocols for its initial retrieval. Protocols are evaluated left
to right, are comma separated, and are each a protocol name or 'all', optionally prefixed by
zero or more modifiers. Available modifiers are:
+ Permit this protocol in addition to protocols already permitted (this is the default if no
modifier is used).
- Deny this protocol, removing it from the list of protocols already permitted.
= Permit only this protocol (ignoring the list already permitted), though subject to later
modification by subsequent entries in the comma separated list.
For example:
--proto -ftps uses the default protocols, but disables ftps
--proto -all,https,+http
only enables http and https
--proto =http,https
also only enables http and https
Unknown protocols produce a warning. This allows scripts to safely rely on being able to dis-able disable
able potentially dangerous protocols, without relying upon support for that protocol being
built into curl to avoid an error.
This option can be used multiple times, in which case the effect is the same as concatenating
the protocols into one instance of the option.
(Added in 7.20.2)
--proto-redir <protocols>
Tells curl to use the listed protocols after a redirect. See --proto for how protocols are
represented.
(Added in 7.20.2)
--proxy-anyauth
Tells curl to pick a suitable authentication method when communicating with the given proxy.
This might cause an extra request/response round-trip. (Added in 7.13.2)
--proxy-basic
Tells curl to use HTTP Basic authentication when communicating with the given proxy. Use
--basic for enabling HTTP Basic with a remote host. Basic is the default authentication method
curl uses with proxies.
--proxy-digest
Tells curl to use HTTP Digest authentication when communicating with the given proxy. Use
--digest for enabling HTTP Digest with a remote host.
--proxy-negotiate
Tells curl to use HTTP Negotiate authentication when communicating with the given proxy. Use
--negotiate for enabling HTTP Negotiate with a remote host. (Added in 7.17.1)
--proxy-ntlm
Tells curl to use HTTP NTLM authentication when communicating with the given proxy. Use --ntlm
for enabling NTLM with a remote host.
--proxy1.0 <proxyhost[:port]>
Use the specified HTTP 1.0 proxy. If the port number is not specified, it is assumed at port
1080.
The only difference between this and the HTTP proxy option (-x, --proxy), is that attempts to
use CONNECT through the proxy will specify an HTTP 1.0 protocol instead of the default HTTP
1.1.
--pubkey <key>
(SSH) Public key file name. Allows you to provide your public key in this separate file.
If this option is used several times, the last one will be used.
-q If used as the first parameter on the command line, the curlrc config file will not be read
and used. See the -K, --config for details on the default config file search path.
-Q, --quote <command>
(FTP/SFTP) Send an arbitrary command to the remote FTP or SFTP server. Quote commands are sent
BEFORE the transfer takes place (just after the initial PWD command in an FTP transfer, to be
exact). To make commands take place after a successful transfer, prefix them with a dash '-'.
To make commands be sent after curl has changed the working directory, just before the trans-fer transfer
fer command(s), prefix the command with a '+' (this is only supported for FTP). You may spec-ify specify
ify any number of commands. If the server returns failure for one of the commands, the entire
operation will be aborted. You must send syntactically correct FTP commands as RFC 959 defines
to FTP servers, or one of the commands listed below to SFTP servers. This option can be used
multiple times. When speaking to an FTP server, prefix the command with an asterisk (*) to
make curl continue even if the command fails as by default curl will stop at first failure.
SFTP is a binary protocol. Unlike for FTP, curl interprets SFTP quote commands itself before
sending them to the server. File names may be quoted shell-style to embed spaces or special
characters. Following is the list of all supported SFTP quote commands:
chgrp group file
The chgrp command sets the group ID of the file named by the file operand to the group
ID specified by the group operand. The group operand is a decimal integer group ID.
chmod mode file
The chmod command modifies the file mode bits of the specified file. The mode operand
is an octal integer mode number.
chown user file
The chown command sets the owner of the file named by the file operand to the user ID
specified by the user operand. The user operand is a decimal integer user ID.
ln source_file target_file
The ln and symlink commands create a symbolic link at the target_file location pointing
to the source_file location.
mkdir directory_name
The mkdir command creates the directory named by the directory_name operand.
pwd The pwd command returns the absolute pathname of the current working directory.
rename source target
The rename command renames the file or directory named by the source operand to the
destination path named by the target operand.
rm file
The rm command removes the file specified by the file operand.
rmdir directory
The rmdir command removes the directory entry specified by the directory operand, pro-vided provided
vided it is empty.
symlink source_file target_file
See ln.
-r, --range <range>
(HTTP/FTP/SFTP/FILE) Retrieve a byte range (i.e a partial document) from a HTTP/1.1, FTP or
SFTP server or a local FILE. Ranges can be specified in a number of ways.
0-499 specifies the first 500 bytes
500-999 specifies the second 500 bytes
-500 specifies the last 500 bytes
9500- specifies the bytes from offset 9500 and forward
0-0,-1 specifies the first and last byte only(*)(H)
500-700,600-799
specifies 300 bytes from offset 500(H)
100-199,500-599
specifies two separate 100-byte ranges(*)(H)
(*) = NOTE that this will cause the server to reply with a multipart response!
Only digit characters (0-9) are valid in the 'start' and 'stop' fields of the 'start-stop' range syn-tax. syntax.
tax. If a non-digit character is given in the range, the server's response will be unspecified,
depending on the server's configuration.
You should also be aware that many HTTP/1.1 servers do not have this feature enabled, so that when
you attempt to get a range, you'll instead get the whole document.
FTP and SFTP range downloads only support the simple 'start-stop' syntax (optionally with one of the
numbers omitted). FTP use depends on the extended FTP command SIZE.
If this option is used several times, the last one will be used.
-R, --remote-time
When used, this will make curl attempt to figure out the timestamp of the remote file, and if
that is available make the local file get that same timestamp.
--random-file <file>
(SSL) Specify the path name to file containing what will be considered as random data. The
data is used to seed the random engine for SSL connections. See also the --egd-file option.
--raw (HTTP) When used, it disables all internal HTTP decoding of content or transfer encodings and
instead makes them passed on unaltered, raw. (Added in 7.16.2)
--remote-name-all
This option changes the default action for all given URLs to be dealt with as if -O, --remote-name --remotename
name were used for each one. So if you want to disable that for a specific URL after --remote-name-all --remotename-all
name-all has been used, you must use "-o -" or --no-remote-name. (Added in 7.19.0)
--resolve <host:port:address>
Provide a custom address for a specific host and port pair. Using this, you can make the curl
requests(s) use a specified address and prevent the otherwise normally resolved address to be
used. Consider it a sort of /etc/hosts alternative provided on the command line. The port num-ber number
ber should be the number used for the specific protocol the host will be used for. It means
you need several entries if you want to provide address for the same host but different ports.
This option can be used many times to add many host names to resolve.
(Added in 7.21.3)
--retry <num>
If a transient error is returned when curl tries to perform a transfer, it will retry this
number of times before giving up. Setting the number to 0 makes curl do no retries (which is
the default). Transient error means either: a timeout, an FTP 4xx response code or an HTTP 5xx
response code.
When curl is about to retry a transfer, it will first wait one second and then for all forth-coming forthcoming
coming retries it will double the waiting time until it reaches 10 minutes which then will be
the delay between the rest of the retries. By using --retry-delay you disable this exponen-tial exponential
tial backoff algorithm. See also --retry-max-time to limit the total time allowed for retries.
(Added in 7.12.3)
If this option is used several times, the last one will be used.
--retry-delay <seconds>
Make curl sleep this amount of time before each retry when a transfer has failed with a tran-sient transient
sient error (it changes the default backoff time algorithm between retries). This option is
only interesting if --retry is also used. Setting this delay to zero will make curl use the
default backoff time. (Added in 7.12.3)
If this option is used several times, the last one will be used.
--retry-max-time <seconds>
The retry timer is reset before the first transfer attempt. Retries will be done as usual (see
--retry) as long as the timer hasn't reached this given limit. Notice that if the timer hasn't
reached the limit, the request will be made and while performing, it may take longer than this
given time period. To limit a single request's maximum time, use -m, --max-time. Set this
option to zero to not timeout retries. (Added in 7.12.3)
If this option is used several times, the last one will be used.
-s, --silent
Silent or quiet mode. Don't show progress meter or error messages. Makes Curl mute.
-S, --show-error
When used with -s it makes curl show an error message if it fails.
--ssl (FTP, POP3, IMAP, SMTP) Try to use SSL/TLS for the connection. Reverts to a non-secure con-nection connection
nection if the server doesn't support SSL/TLS. See also --ftp-ssl-control and --ssl-reqd for
different levels of encryption required. (Added in 7.20.0)
This option was formerly known as --ftp-ssl (Added in 7.11.0). That option name can still be
used but will be removed in a future version.
--ssl-reqd
(FTP, POP3, IMAP, SMTP) Require SSL/TLS for the connection. Terminates the connection if the
server doesn't support SSL/TLS. (Added in 7.20.0)
This option was formerly known as --ftp-ssl-reqd (added in 7.15.5). That option name can still
be used but will be removed in a future version.
--ssl-allow-beast
(SSL) This option tells curl to not work around a security flaw in the SSL3 and TLS1.0 proto-cols protocols
cols known as BEAST. If this option isn't used, the SSL layer may use work-arounds known to
cause interoperability problems with some older SSL implementations. WARNING: this option
loosens the SSL security, and by using this flag you ask for exactly that. (Added in 7.25.0)
--socks4 <host[:port]>
Use the specified SOCKS4 proxy. If the port number is not specified, it is assumed at port
1080. (Added in 7.15.2)
This option overrides any previous use of -x, --proxy, as they are mutually exclusive.
Since 7.21.7, this option is superfluous since you can specify a socks4 proxy with -x, --proxy
using a socks4:// protocol prefix.
If this option is used several times, the last one will be used.
--socks4a <host[:port]>
Use the specified SOCKS4a proxy. If the port number is not specified, it is assumed at port
1080. (Added in 7.18.0)
This option overrides any previous use of -x, --proxy, as they are mutually exclusive.
Since 7.21.7, this option is superfluous since you can specify a socks4a proxy with -x,
--proxy using a socks4a:// protocol prefix.
If this option is used several times, the last one will be used.
--socks5-hostname <host[:port]>
Use the specified SOCKS5 proxy (and let the proxy resolve the host name). If the port number
is not specified, it is assumed at port 1080. (Added in 7.18.0)
This option overrides any previous use of -x, --proxy, as they are mutually exclusive.
Since 7.21.7, this option is superfluous since you can specify a socks5 hostname proxy with
-x, --proxy using a socks5h:// protocol prefix.
If this option is used several times, the last one will be used. (This option was previously
wrongly documented and used as --socks without the number appended.)
--socks5 <host[:port]>
Use the specified SOCKS5 proxy - but resolve the host name locally. If the port number is not
specified, it is assumed at port 1080.
This option overrides any previous use of -x, --proxy, as they are mutually exclusive.
Since 7.21.7, this option is superfluous since you can specify a socks5 proxy with -x, --proxy
using a socks5:// protocol prefix.
If this option is used several times, the last one will be used. (This option was previously
wrongly documented and used as --socks without the number appended.)
This option (as well as --socks4) does not work with IPV6, FTPS or LDAP.
--socks5-gssapi-service <servicename>
The default service name for a socks server is rcmd/server-fqdn. This option allows you to
change it.
Examples: --socks5 proxy-name --socks5-gssapi-service sockd would use sockd/proxy-name
--socks5 proxy-name --socks5-gssapi-service sockd/real-name would use sockd/real-name for
cases where the proxy-name does not match the principal name. (Added in 7.19.4).
--socks5-gssapi-nec
As part of the gssapi negotiation a protection mode is negotiated. RFC 1961 says in section
4.3/4.4 it should be protected, but the NEC reference implementation does not. The option
--socks5-gssapi-nec allows the unprotected exchange of the protection mode negotiation. (Added
in 7.19.4).
--stderr <file>
Redirect all writes to stderr to the specified file instead. If the file name is a plain '-',
it is instead written to stdout.
If this option is used several times, the last one will be used.
-t, --telnet-option <OPT=val>
Pass options to the telnet protocol. Supported options are:
TTYPE=<term> Sets the terminal type.
XDISPLOC=<X display> Sets the X display location.
NEW_ENV=<var,val> Sets an environment variable.
-T, --upload-file <file>
This transfers the specified local file to the remote URL. If there is no file part in the
specified URL, Curl will append the local file name. NOTE that you must use a trailing / on
the last directory to really prove to Curl that there is no file name or curl will think that
your last directory name is the remote file name to use. That will most likely cause the
upload operation to fail. If this is used on an HTTP(S) server, the PUT command will be used.
Use the file name "-" (a single dash) to use stdin instead of a given file. Alternately, the
file name "." (a single period) may be specified instead of "-" to use stdin in non-blocking
mode to allow reading server output while stdin is being uploaded.
You can specify one -T for each URL on the command line. Each -T + URL pair specifies what to
upload and to where. curl also supports "globbing" of the -T argument, meaning that you can
upload multiple files to a single URL by using the same URL globbing style supported in the
URL, like this:
curl -T "{file1,file2}" http://www.uploadtothissite.com
or even
curl -T "img[1-1000].png" ftp://ftp.picturemania.com/upload/
--tcp-nodelay
Turn on the TCP_NODELAY option. See the curl_easy_setopt(3) man page for details about this
option. (Added in 7.11.2)
--tftp-blksize <value>
(TFTP) Set TFTP BLKSIZE option (must be >512). This is the block size that curl will try to
use when transferring data to or from a TFTP server. By default 512 bytes will be used.
If this option is used several times, the last one will be used.
(Added in 7.20.0)
--tlsauthtype <authtype>
Set TLS authentication type. Currently, the only supported option is "SRP", for TLS-SRP (RFC
5054). If --tlsuser and --tlspassword are specified but --tlsauthtype is not, then this option
defaults to "SRP". (Added in 7.21.4)
--tlsuser <user>
Set username for use with the TLS authentication method specified with --tlsauthtype. Requires
that --tlspassword also be set. (Added in 7.21.4)
--tlspassword <password>
Set password for use with the TLS authentication method specified with --tlsauthtype. Requires
that --tlsuser also be set. (Added in 7.21.4)
--tr-encoding
(HTTP) Request a compressed Transfer-Encoding response using one of the algorithms curl sup-ports, supports,
ports, and uncompress the data while receiving it.
(Added in 7.21.6)
--trace <file>
Enables a full trace dump of all incoming and outgoing data, including descriptive informa-tion, information,
tion, to the given output file. Use "-" as filename to have the output sent to stdout.
This option overrides previous uses of -v, --verbose or --trace-ascii.
If this option is used several times, the last one will be used.
--trace-ascii <file>
Enables a full trace dump of all incoming and outgoing data, including descriptive informa-tion, information,
tion, to the given output file. Use "-" as filename to have the output sent to stdout.
This is very similar to --trace, but leaves out the hex part and only shows the ASCII part of
the dump. It makes smaller output that might be easier to read for untrained humans.
This option overrides previous uses of -v, --verbose or --trace.
If this option is used several times, the last one will be used.
--trace-time
Prepends a time stamp to each trace or verbose line that curl displays. (Added in 7.14.0)
-u, --user <user:password>
Specify the user name and password to use for server authentication. Overrides -n, --netrc and
--netrc-optional.
If you just give the user name (without entering a colon) curl will prompt for a password.
If you use an SSPI-enabled curl binary and do NTLM authentication, you can force curl to pick
up the user name and password from your environment by simply specifying a single colon with
this option: "-u :".
If this option is used several times, the last one will be used.
-U, --proxy-user <user:password>
Specify the user name and password to use for proxy authentication.
If you use an SSPI-enabled curl binary and do NTLM authentication, you can force curl to pick
up the user name and password from your environment by simply specifying a single colon with
this option: "-U :".
If this option is used several times, the last one will be used.
--url <URL>
Specify a URL to fetch. This option is mostly handy when you want to specify URL(s) in a con-fig config
fig file.
This option may be used any number of times. To control where this URL is written, use the -o,
--output or the -O, --remote-name options.
-v, --verbose
Makes the fetching more verbose/talkative. Mostly useful for debugging. A line starting with
'>' means "header data" sent by curl, '<' means "header data" received by curl that is hidden
in normal cases, and a line starting with '*' means additional info provided by curl.
Note that if you only want HTTP headers in the output, -i, --include might be the option
you're looking for.
If you think this option still doesn't give you enough details, consider using --trace or
--trace-ascii instead.
This option overrides previous uses of --trace-ascii or --trace.
Use -s, --silent to make curl quiet.
-w, --write-out <format>
Defines what to display on stdout after a completed and successful operation. The format is a
string that may contain plain text mixed with any number of variables. The string can be spec-ified specified
ified as "string", to get read from a particular file you specify it "@filename" and to tell
curl to read the format from stdin you write "@-".
The variables present in the output format will be substituted by the value or text that curl
thinks fit, as described below. All variables are specified as %{variable_name} and to output
a normal % you just write them as %%. You can output a newline by using \n, a carriage return
with \r and a tab space with \t.
NOTE: The %-symbol is a special symbol in the win32-environment, where all occurrences of %
must be doubled when using this option.
The variables available are:
content_type The Content-Type of the requested document, if there was any.
filename_effective
The ultimate filename that curl writes out to. This is only meaningful if curl
is told to write to a file with the --remote-name or --output option. It's most
useful in combination with the --remote-header-name option. (Added in 7.25.1)
ftp_entry_path The initial path curl ended up in when logging on to the remote FTP server.
(Added in 7.15.4)
http_code The numerical response code that was found in the last retrieved HTTP(S) or
FTP(s) transfer. In 7.18.2 the alias response_code was added to show the same
info.
http_connect The numerical code that was found in the last response (from a proxy) to a curl
CONNECT request. (Added in 7.12.4)
local_ip The IP address of the local end of the most recently done connection - can be
either IPv4 or IPv6 (Added in 7.29.0)
local_port The local port number of the most recently done connection (Added in 7.29.0)
num_connects Number of new connects made in the recent transfer. (Added in 7.12.3)
num_redirects Number of redirects that were followed in the request. (Added in 7.12.3)
redirect_url When an HTTP request was made without -L to follow redirects, this variable
will show the actual URL a redirect would take you to. (Added in 7.18.2)
remote_ip The remote IP address of the most recently done connection - can be either IPv4
or IPv6 (Added in 7.29.0)
remote_port The remote port number of the most recently done connection (Added in 7.29.0)
size_download The total amount of bytes that were downloaded.
size_header The total amount of bytes of the downloaded headers.
size_request The total amount of bytes that were sent in the HTTP request.
size_upload The total amount of bytes that were uploaded.
speed_download The average download speed that curl measured for the complete download. Bytes
per second.
speed_upload The average upload speed that curl measured for the complete upload. Bytes per
second.
ssl_verify_result
The result of the SSL peer certificate verification that was requested. 0 means
the verification was successful. (Added in 7.19.0)
time_appconnect
The time, in seconds, it took from the start until the SSL/SSH/etc con-nect/handshake connect/handshake
nect/handshake to the remote host was completed. (Added in 7.19.0)
time_connect The time, in seconds, it took from the start until the TCP connect to the
remote host (or proxy) was completed.
time_namelookup
The time, in seconds, it took from the start until the name resolving was com-pleted. completed.
pleted.
time_pretransfer
The time, in seconds, it took from the start until the file transfer was just
about to begin. This includes all pre-transfer commands and negotiations that
are specific to the particular protocol(s) involved.
time_redirect The time, in seconds, it took for all redirection steps include name lookup,
connect, pretransfer and transfer before the final transaction was started.
time_redirect shows the complete execution time for multiple redirections.
(Added in 7.12.3)
time_starttransfer
The time, in seconds, it took from the start until the first byte was just
about to be transferred. This includes time_pretransfer and also the time the
server needed to calculate the result.
time_total The total time, in seconds, that the full operation lasted. The time will be
displayed with millisecond resolution.
url_effective The URL that was fetched last. This is most meaningful if you've told curl to
follow location: headers.
If this option is used several times, the last one will be used.
-x, --proxy <[protocol://][user:password@]proxyhost[:port]>
Use the specified HTTP proxy. If the port number is not specified, it is assumed at port 1080.
This option overrides existing environment variables that set the proxy to use. If there's an
environment variable setting a proxy, you can set proxy to "" to override it.
All operations that are performed over an HTTP proxy will transparently be converted to HTTP.
It means that certain protocol specific operations might not be available. This is not the
case if you can tunnel through the proxy, as one with the -p, --proxytunnel option.
User and password that might be provided in the proxy string are URL decoded by curl. This
allows you to pass in special characters such as @ by using %40 or pass in a colon with %3a.
The proxy host can be specified the exact same way as the proxy environment variables, includ-ing including
ing the protocol prefix (http://) and the embedded user + password.
From 7.21.7, the proxy string may be specified with a protocol:// prefix to specify alterna-tive alternative
tive proxy protocols. Use socks4://, socks4a://, socks5:// or socks5h:// to request the spe-cific specific
cific SOCKS version to be used. No protocol specified, http:// and all others will be treated
as HTTP proxies.
If this option is used several times, the last one will be used.
-X, --request <command>
(HTTP) Specifies a custom request method to use when communicating with the HTTP server. The
specified request will be used instead of the method otherwise used (which defaults to GET).
Read the HTTP 1.1 specification for details and explanations. Common additional HTTP requests
include PUT and DELETE, but related technologies like WebDAV offers PROPFIND, COPY, MOVE and
more.
Normally you don't need this option. All sorts of GET, HEAD, POST and PUT requests are rather
invoked by using dedicated command line options.
This option only changes the actual word used in the HTTP request, it does not alter the way
curl behaves. So for example if you want to make a proper HEAD request, using -X HEAD will not
suffice. You need to use the -I, --head option.
(FTP) Specifies a custom FTP command to use instead of LIST when doing file lists with FTP.
If this option is used several times, the last one will be used.
--xattr
When saving output to a file, this option tells curl to store certain file metadata in extened
file attributes. Currently, the URL is stored in the xdg.origin.url attribute and, for HTTP,
the content type is stored in the mime_type attribute. If the file system does not support
extended attributes, a warning is issued.
-y, --speed-time <time>
If a download is slower than speed-limit bytes per second during a speed-time period, the
download gets aborted. If speed-time is used, the default speed-limit will be 1 unless set
with -Y.
This option controls transfers and thus will not affect slow connects etc. If this is a con-cern concern
cern for you, try the --connect-timeout option.
If this option is used several times, the last one will be used.
-Y, --speed-limit <speed>
If a download is slower than this given speed (in bytes per second) for speed-time seconds it
gets aborted. speed-time is set with -y and is 30 if not set.
If this option is used several times, the last one will be used.
-z/--time-cond <date expression>|<file>
(HTTP/FTP) Request a file that has been modified later than the given time and date, or one
that has been modified before that time. The <date expression> can be all sorts of date
strings or if it doesn't match any internal ones, it is taken as a filename and tries to get
the modification date (mtime) from <file> instead. See the curl_getdate(3) man pages for date
expression details.
Start the date expression with a dash (-) to make it request for a document that is older than
the given date/time, default is a document that is newer than the specified date/time.
If this option is used several times, the last one will be used.
-h, --help
Usage help.
-M, --manual
Manual. Display the huge help text.
-V, --version
Displays information about curl and the libcurl version it uses.
The first line includes the full version of curl, libcurl and other 3rd party libraries linked
with the executable.
The second line (starts with "Protocols:") shows all protocols that libcurl reports to sup-port. support.
port.
The third line (starts with "Features:") shows specific features libcurl reports to offer.
Available features include:
IPv6 You can use IPv6 with this.
krb4 Krb4 for FTP is supported.
SSL HTTPS and FTPS are supported.
libz Automatic decompression of compressed files over HTTP is supported.
NTLM NTLM authentication is supported.
GSS-Negotiate
Negotiate authentication and krb5 for FTP is supported.
Debug This curl uses a libcurl built with Debug. This enables more error-tracking and memory
debugging etc. For curl-developers only!
AsynchDNS
This curl uses asynchronous name resolves.
SPNEGO SPNEGO Negotiate authentication is supported.
Largefile
This curl supports transfers of large files, files larger than 2GB.
IDN This curl supports IDN - international domain names.
SSPI SSPI is supported. If you use NTLM and set a blank user name, curl will authenticate
with your current user and password.
TLS-SRP
SRP (Secure Remote Password) authentication is supported for TLS.
Metalink
This curl supports Metalink (both version 3 and 4 (RFC 5854)), which describes mirrors
and hashes. curl will use mirrors for failover if there are errors (such as the file
or server not being available).
FILES
~/.curlrc
Default config file, see -K, --config for details.
ENVIRONMENT
The environment variables can be specified in lower case or upper case. The lower case version has
precedence. http_proxy is an exception as it is only available in lower case.
Using an environment variable to set the proxy has the same effect as using the --proxy option.
http_proxy [protocol://]<host>[:port]
Sets the proxy server to use for HTTP.
HTTPS_PROXY [protocol://]<host>[:port]
Sets the proxy server to use for HTTPS.
[url-protocol]_PROXY [protocol://]<host>[:port]
Sets the proxy server to use for [url-protocol], where the protocol is a protocol that curl
supports and as specified in a URL. FTP, FTPS, POP3, IMAP, SMTP, LDAP etc.
ALL_PROXY [protocol://]<host>[:port]
Sets the proxy server to use if no protocol-specific proxy is set.
NO_PROXY <comma-separated list of hosts>
list of host names that shouldn't go through any proxy. If set to a asterisk '*' only, it
matches all hosts.
PROXY PROTOCOL PREFIXES
Since curl version 7.21.7, the proxy string may be specified with a protocol:// prefix to specify
alternative proxy protocols.
If no protocol is specified in the proxy string or if the string doesn't match a supported one, the
proxy will be treated as an HTTP proxy.
The supported proxy protocol prefixes are as follows:
socks4://
Makes it the equivalent of --socks4
socks4a://
Makes it the equivalent of --socks4a
socks5://
Makes it the equivalent of --socks5
socks5h://
Makes it the equivalent of --socks5-hostname
EXIT CODES
There are a bunch of different error codes and their corresponding error messages that may appear
during bad conditions. At the time of this writing, the exit codes are:
1 Unsupported protocol. This build of curl has no support for this protocol.
2 Failed to initialize.
3 URL malformed. The syntax was not correct.
4 A feature or option that was needed to perform the desired request was not enabled or was
explicitly disabled at build-time. To make curl able to do this, you probably need another
build of libcurl!
5 Couldn't resolve proxy. The given proxy host could not be resolved.
6 Couldn't resolve host. The given remote host was not resolved.
7 Failed to connect to host.
8 FTP weird server reply. The server sent data curl couldn't parse.
9 FTP access denied. The server denied login or denied access to the particular resource or
directory you wanted to reach. Most often you tried to change to a directory that doesn't
exist on the server.
11 FTP weird PASS reply. Curl couldn't parse the reply sent to the PASS request.
13 FTP weird PASV reply, Curl couldn't parse the reply sent to the PASV request.
14 FTP weird 227 format. Curl couldn't parse the 227-line the server sent.
15 FTP can't get host. Couldn't resolve the host IP we got in the 227-line.
17 FTP couldn't set binary. Couldn't change transfer method to binary.
18 Partial file. Only a part of the file was transferred.
19 FTP couldn't download/access the given file, the RETR (or similar) command failed.
21 FTP quote error. A quote command returned error from the server.
22 HTTP page not retrieved. The requested url was not found or returned another error with the
HTTP error code being 400 or above. This return code only appears if -f, --fail is used.
23 Write error. Curl couldn't write data to a local filesystem or similar.
25 FTP couldn't STOR file. The server denied the STOR operation, used for FTP uploading.
26 Read error. Various reading problems.
27 Out of memory. A memory allocation request failed.
28 Operation timeout. The specified time-out period was reached according to the conditions.
30 FTP PORT failed. The PORT command failed. Not all FTP servers support the PORT command, try
doing a transfer using PASV instead!
31 FTP couldn't use REST. The REST command failed. This command is used for resumed FTP trans-fers. transfers.
fers.
33 HTTP range error. The range "command" didn't work.
34 HTTP post error. Internal post-request generation error.
35 SSL connect error. The SSL handshaking failed.
36 FTP bad download resume. Couldn't continue an earlier aborted download.
37 FILE couldn't read file. Failed to open the file. Permissions?
38 LDAP cannot bind. LDAP bind operation failed.
39 LDAP search failed.
41 Function not found. A required LDAP function was not found.
42 Aborted by callback. An application told curl to abort the operation.
43 Internal error. A function was called with a bad parameter.
45 Interface error. A specified outgoing interface could not be used.
47 Too many redirects. When following redirects, curl hit the maximum amount.
48 Unknown option specified to libcurl. This indicates that you passed a weird option to curl
that was passed on to libcurl and rejected. Read up in the manual!
49 Malformed telnet option.
51 The peer's SSL certificate or SSH MD5 fingerprint was not OK.
52 The server didn't reply anything, which here is considered an error.
53 SSL crypto engine not found.
54 Cannot set SSL crypto engine as default.
55 Failed sending network data.
56 Failure in receiving network data.
58 Problem with the local certificate.
59 Couldn't use specified SSL cipher.
60 Peer certificate cannot be authenticated with known CA certificates.
61 Unrecognized transfer encoding.
62 Invalid LDAP URL.
63 Maximum file size exceeded.
64 Requested FTP SSL level failed.
65 Sending the data requires a rewind that failed.
66 Failed to initialise SSL Engine.
67 The user name, password, or similar was not accepted and curl failed to log in.
68 File not found on TFTP server.
69 Permission problem on TFTP server.
70 Out of disk space on TFTP server.
71 Illegal TFTP operation.
72 Unknown TFTP transfer ID.
73 File already exists (TFTP).
74 No such user (TFTP).
75 Character conversion failed.
76 Character conversion functions required.
77 Problem with reading the SSL CA cert (path? access rights?).
78 The resource referenced in the URL does not exist.
79 An unspecified error occurred during the SSH session.
80 Failed to shut down the SSL connection.
82 Could not load CRL file, missing or wrong format (added in 7.19.0).
83 Issuer check failed (added in 7.19.0).
84 The FTP PRET command failed
85 RTSP: mismatch of CSeq numbers
86 RTSP: mismatch of Session Identifiers
87 unable to parse FTP file list
88 FTP chunk callback reported error
XX More error codes will appear here in future releases. The existing ones are meant to never
change.
AUTHORS / CONTRIBUTORS
Daniel Stenberg is the main author, but the whole list of contributors is found in the separate
THANKS file.
WWW
http://curl.haxx.se
FTP
ftp://ftp.sunet.se/pub/www/utilities/curl/
SEE ALSO
ftp(1)
Curl 7.27.0 27 July 2012 curl(1)
|
Сообщение о проблемах
Способ сообщить о проблеме с этой страницей руководства зависит от типа проблемы:
- Ошибки содержания
- Ошибки отчета в содержании этой документации со ссылками на отзыв ниже.
- Отчеты об ошибках
- Сообщите об ошибках в функциональности описанного инструмента или API через Генератор отчетов Ошибки.
- Форматирование проблем
- Отчет, форматирующий ошибки в интерактивной версии этих страниц со ссылками на отзыв ниже.