Страницы справочника OS X

Эта страница руководства для  версии 10.9 Mac OS X

Читать страницы руководства

PERLCE(1)                             Perl Programmers Reference Guide                             PERLCE(1)



NAME
       perlce - Perl for WinCE

Building Perl for WinCE
   DESCRIPTION
       This file gives the instructions for building Perl5.8 and above for WinCE.  Please read and
       understand the terms under which this software is distributed.

   General explanations on cross-compiling WinCE
       •   miniperl is built. This is a single executable (without DLL), intended to run on Win32, and it
           will facilitate remaining build process; all binaries built after it are foreign and should not
           run locally.

           miniperl is built using ./win32/Makefile; this is part of normal build process invoked as
           dependency from wince/Makefile.ce

       •   After miniperl is built, configpm is invoked to create right Config.pm in right place and its
           corresponding Cross.pm.

           Unlike Win32 build, miniperl will not have Config.pm of host within reach; it rather will use
           Config.pm from within cross-compilation directories.

           File Cross.pm is dead simple: for given cross-architecture places in @INC a path where perl
           modules are, and right Config.pm in that place.

           That said, "miniperl -Ilib -MConfig -we 1" should report an error, because it can not find
           Config.pm. If it does not give an error -- wrong Config.pm is substituted, and resulting binaries
           will be a mess.

           "miniperl -MCross -MConfig -we 1" should run okay, and it will provide right Config.pm for
           further compilations.

       •   During extensions build phase, a script ./win32/buldext.pl is invoked, which in turn steps in
           ./ext subdirectories and performs a build of each extension in turn.

           All invokes of Makefile.PL are provided with "-MCross" so to enable cross- compile.

   BUILD
       This section describes the steps to be performed to build PerlCE.  You may find additional
       information about building perl for WinCE at <http://perlce.sourceforge.net> and some pre-built
       binaries.

       Tools & SDK

       For compiling, you need following:

       •   Microsoft Embedded Visual Tools

       •   Microsoft Visual C++

       •   Rainer Keuchel's celib-sources

       •   Rainer Keuchel's console-sources

       Needed source files can be downloaded at <http://perlce.sourceforge.net>

       Make

       Normally you only need to edit ./win32/ce-helpers/compile.bat to reflect your system and run it.

       File ./win32/ce-helpers/compile.bat is actually a wrapper to call "nmake -f makefile.ce" with
       appropriate parameters and it accepts extra parameters and forwards them to "nmake" command as
       additional arguments. You should pass target this way.

       To prepare distribution you need to do following:

       •   go to ./win32 subdirectory

       •   edit file ./win32/ce-helpers/compile.bat

       •   run
             compile.bat

       •   run
             compile.bat dist

       Makefile.ce has "CROSS_NAME" macro, and it is used further to refer to your cross-compilation scheme.
       You could assign a name to it, but this is not necessary, because by default it is assigned after
       your machine configuration name, such as "wince-sh3-hpc-wce211", and this is enough to distinguish
       different builds at the same time. This option could be handy for several different builds on same
       platform to perform, say, threaded build. In a following example we assume that all required
       environment variables are set properly for C cross-compiler (a special *.bat file could fit perfectly
       to this purpose) and your compile.bat has proper "MACHINE" parameter set, to, say,
       "wince-mips-pocket-wce300".

         compile.bat
         compile.bat dist
         compile.bat CROSS_NAME=mips-wce300-thr "USE_ITHREADS=define" "USE_IMP_SYS=define" "USE_MULTI=define"
         compile.bat CROSS_NAME=mips-wce300-thr "USE_ITHREADS=define" "USE_IMP_SYS=define" "USE_MULTI=define" dist

       If all goes okay and no errors during a build, you'll get two independent distributions:
       "wince-mips-pocket-wce300" and "mips-wce300-thr".

       Target "dist" prepares distribution file set. Target "zipdist" performs same as "dist" but
       additionally compresses distribution files into zip archive.

       NOTE: during a build there could be created a number (or one) of Config.pm for cross-compilation
       ("foreign" Config.pm) and those are hidden inside ../xlib/$(CROSS_NAME) with other auxiliary files,
       but, and this is important to note, there should be no Config.pm for host miniperl.  If you'll get an
       error that perl could not find Config.pm somewhere in building process this means something went
       wrong. Most probably you forgot to specify a cross-compilation when invoking miniperl.exe to
       Makefile.PL When building an extension for cross-compilation your command line should look like

         ..\miniperl.exe -I..\lib -MCross=mips-wce300-thr Makefile.PL

       or just

         ..\miniperl.exe -I..\lib -MCross Makefile.PL

       to refer a cross-compilation that was created last time.

       All questions related to building for WinCE devices could be asked in
       perlce-user@lists.sourceforge.net mailing list.

Using Perl on WinCE
   DESCRIPTION
       PerlCE is currently linked with a simple console window, so it also works on non-hpc devices.

       The simple stdio implementation creates the files stdin.txt, stdout.txt and stderr.txt, so you might
       examine them if your console has only a limited number of cols.

       When exitcode is non-zero, a message box appears, otherwise the console closes, so you might have to
       catch an exit with status 0 in your program to see any output.

       stdout/stderr now go into the files /perl-stdout.txt and /perl-stderr.txt.

       PerlIDE is handy to deal with perlce.

   LIMITATIONS
       No fork(), pipe(), popen() etc.

   ENVIRONMENT
       All environment vars must be stored in HKLM\Environment as strings. They are read at process startup.

       PERL5LIB
           Usual perl lib path (semi-list).

       PATH
           Semi-list for executables.

       TMP - Tempdir.

       UNIXROOTPATH
           - Root for accessing some special files, i.e. /dev/null, /etc/services.

       ROWS/COLS
           - Rows/cols for console.

       HOME
           - Home directory.

       CONSOLEFONTSIZE
           - Size for console font.

       You can set these with cereg.exe, a (remote) registry editor or via the PerlIDE.

   REGISTRY
       To start perl by clicking on a perl source file, you have to make the according entries in HKCR (see
       ce-helpers/wince-reg.bat).  cereg.exe (which must be executed on a desktop pc with ActiveSync) is
       reported not to work on some devices.  You have to create the registry entries by hand using a
       registry editor.

   XS
       The following Win32-Methods are built-in:

               newXS("Win32::GetCwd", w32_GetCwd, file);
               newXS("Win32::SetCwd", w32_SetCwd, file);
               newXS("Win32::GetTickCount", w32_GetTickCount, file);
               newXS("Win32::GetOSVersion", w32_GetOSVersion, file);
               newXS("Win32::IsWinNT", w32_IsWinNT, file);
               newXS("Win32::IsWin95", w32_IsWin95, file);
               newXS("Win32::IsWinCE", w32_IsWinCE, file);
               newXS("Win32::CopyFile", w32_CopyFile, file);
               newXS("Win32::Sleep", w32_Sleep, file);
               newXS("Win32::MessageBox", w32_MessageBox, file);
               newXS("Win32::GetPowerStatus", w32_GetPowerStatus, file);
               newXS("Win32::GetOemInfo", w32_GetOemInfo, file);
               newXS("Win32::ShellEx", w32_ShellEx, file);

   BUGS
       Opening files for read-write is currently not supported if they use stdio (normal perl file handles).

       If you find bugs or if it does not work at all on your device, send mail to the address below. Please
       report the details of your device (processor, ceversion, devicetype (hpc/palm/pocket)) and the date
       of the downloaded files.

   INSTALLATION
       Currently installation instructions are at <http://perlce.sourceforge.net/>.

       After installation & testing processes will stabilize, information will be more precise.

ACKNOWLEDGEMENTS
       The port for Win32 was used as a reference.

History of WinCE port
       5.6.0
           Initial port of perl to WinCE. It was performed in separate directory named wince. This port was
           based on contents of ./win32 directory.  miniperl was not built, user must have HOST perl and
           properly edit makefile.ce to reflect this.

       5.8.0
           wince port was kept in the same ./wince directory, and wince/Makefile.ce was used to invoke
           native compiler to create HOST miniperl, which then facilitates cross-compiling process.
           Extension building support was added.

       5.9.4
           Two directories ./win32 and ./wince were merged, so perlce build process comes in ./win32
           directory.

AUTHORS
       Rainer Keuchel <coyxc@rainer-keuchel.de>
           provided initial port of Perl, which appears to be most essential work, as it was a breakthrough
           on having Perl ported at all.  Many thanks and obligations to Rainer!

       Vadim Konovalov
           made further support of WinCE port.



perl v5.16.2                                     2012-10-11                                        PERLCE(1)