|
|
Эта страница руководства для версии 10.9 Mac OS XЕсли Вы выполняете различную версию Mac OS X, просматриваете документацию локально:
Читать страницы руководстваСтраницы руководства предназначаются как справочник для людей, уже понимающих технологию.
|
PERLFAQ3(1) Perl Programmers Reference Guide PERLFAQ3(1)
NAME
perlfaq3 - Programming Tools
DESCRIPTION
This section of the FAQ answers questions related to programmer tools and programming support.
How do I do (anything)?
Have you looked at CPAN (see perlfaq2)? The chances are that someone has already written a module
that can solve your problem. Have you read the appropriate manpages? Here's a brief index:
Basics perldata, perlvar, perlsyn, perlop, perlsub
Execution perlrun, perldebug
Functions perlfunc
Objects perlref, perlmod, perlobj, perltie
Data Structures perlref, perllol, perldsc
Modules perlmod, perlmodlib, perlsub
Regexes perlre, perlfunc, perlop, perllocale
Moving to perl5 perltrap, perl
Linking w/C perlxstut, perlxs, perlcall, perlguts, perlembed
Various http://www.cpan.org/misc/olddoc/FMTEYEWTK.tgz
(not a man-page but still useful, a collection
of various essays on Perl techniques)
A crude table of contents for the Perl manpage set is found in perltoc.
How can I use Perl interactively?
The typical approach uses the Perl debugger, described in the perldebug(1) manpage, on an "empty"
program, like this:
perl -de 42
Now just type in any legal Perl code, and it will be immediately evaluated. You can also examine the
symbol table, get stack backtraces, check variable values, set breakpoints, and other operations
typically found in symbolic debuggers.
Is there a Perl shell?
The "psh" (Perl sh) is currently at version 1.8. The Perl Shell is a shell that combines the
interactive nature of a Unix shell with the power of Perl. The goal is a full featured shell that
behaves as expected for normal shell activity and uses Perl syntax and functionality for control-flow
statements and other things. You can get "psh" at http://sourceforge.net/projects/psh/ .
"Zoidberg" is a similar project and provides a shell written in perl, configured in perl and operated
in perl. It is intended as a login shell and development environment. It can be found at
http://pardus-larus.student.utwente.nl/~pardus/projects/zoidberg/ or your local CPAN mirror.
The "Shell.pm" module (distributed with Perl) makes Perl try commands which aren't part of the Perl
language as shell commands. "perlsh" from the source distribution is simplistic and uninteresting,
but may still be what you want.
How do I find which modules are installed on my system?
From the command line, you can use the "cpan" command's "-l" switch:
$ cpan -l
You can also use "cpan"'s "-a" switch to create an autobundle file that "CPAN.pm" understands and can
use to re-install every module:
$ cpan -a
Inside a Perl program, you can use the "ExtUtils::Installed" module to show all installed
distributions, although it can take awhile to do its magic. The standard library which comes with
Perl just shows up as "Perl" (although you can get those with "Module::CoreList").
use ExtUtils::Installed;
my $inst = ExtUtils::Installed->new();
my @modules = $inst->modules();
If you want a list of all of the Perl module filenames, you can use "File::Find::Rule":
use File::Find::Rule;
my @files = File::Find::Rule->
extras({follow => 1})->
file()->
name( '*.pm' )->
in( @INC )
;
If you do not have that module, you can do the same thing with "File::Find" which is part of the
standard library:
use File::Find;
my @files;
find(
{
wanted => sub {
push @files, $File::Find::fullname
if -f $File::Find::fullname && /\.pm$/
},
follow => 1,
follow_skip => 2,
},
@INC
);
print join "\n", @files;
If you simply need to quickly check to see if a module is available, you can check for its
documentation. If you can read the documentation the module is most likely installed. If you cannot
read the documentation, the module might not have any (in rare cases):
$ perldoc Module::Name
You can also try to include the module in a one-liner to see if perl finds it:
$ perl -MModule::Name -e1
How do I debug my Perl programs?
(contributed by brian d foy)
Before you do anything else, you can help yourself by ensuring that you let Perl tell you about
problem areas in your code. By turning on warnings and strictures, you can head off many problems
before they get too big. You can find out more about these in strict and warnings.
#!/usr/bin/perl
use strict;
use warnings;
Beyond that, the simplest debugger is the "print" function. Use it to look at values as you run your
program:
print STDERR "The value is [$value]\n";
The "Data::Dumper" module can pretty-print Perl data structures:
use Data::Dumper qw( Dumper );
print STDERR "The hash is " . Dumper( \%hash ) . "\n";
Perl comes with an interactive debugger, which you can start with the "-d" switch. It's fully
explained in perldebug.
If you'd like a graphical user interface and you have "Tk", you can use "ptkdb". It's on CPAN and
available for free.
If you need something much more sophisticated and controllable, Leon Brocard's "Devel::ebug" (which
you can call with the "-D" switch as "-Debug") gives you the programmatic hooks into everything you
need to write your own (without too much pain and suffering).
You can also use a commercial debugger such as Affrus (Mac OS X), Komodo from Activestate (Windows
and Mac OS X), or EPIC (most platforms).
How do I profile my Perl programs?
(contributed by brian d foy, updated Fri Jul 25 12:22:26 PDT 2008)
The "Devel" namespace has several modules which you can use to profile your Perl programs. The
"Devel::DProf" module comes with Perl and you can invoke it with the "-d" switch:
perl -d:DProf program.pl
After running your program under "DProf", you'll get a tmon.out file with the profile data. To look
at the data, you can turn it into a human-readable report with the "dprofpp" program that comes with
"Devel::DProf".
dprofpp
You can also do the profiling and reporting in one step with the "-p" switch to "dprofpp":
dprofpp -p program.pl
The "Devel::NYTProf" (New York Times Profiler) does both statement and subroutine profiling. It's
available from CPAN and you also invoke it with the "-d" switch:
perl -d:NYTProf some_perl.pl
Like "DProf", it creates a database of the profile information that you can turn into reports. The
"nytprofhtml" command turns the data into an HTML report similar to the "Devel::Cover" report:
nytprofhtml
CPAN has several other profilers that you can invoke in the same fashion. You might also be
interested in using the "Benchmark" to measure and compare code snippets.
You can read more about profiling in Programming Perl, chapter 20, or Mastering Perl, chapter 5.
perldebguts documents creating a custom debugger if you need to create a special sort of profiler.
brian d foy describes the process in The Perl Journal, "Creating a Perl Debugger",
http://www.ddj.com/184404522 , and "Profiling in Perl" http://www.ddj.com/184404580 .
Perl.com has two interesting articles on profiling: "Profiling Perl", by Simon Cozens,
http://www.perl.com/lpt/a/850 and "Debugging and Profiling mod_perl Applications", by Frank Wiles,
http://www.perl.com/pub/a/2006/02/09/debug_mod_perl.html .
Randal L. Schwartz writes about profiling in "Speeding up Your Perl Programs" for Unix Review,
http://www.stonehenge.com/merlyn/UnixReview/col49.html , and "Profiling in Template Toolkit via
Overriding" for Linux Magazine, http://www.stonehenge.com/merlyn/LinuxMag/col75.html .
How do I cross-reference my Perl programs?
The "B::Xref" module can be used to generate cross-reference reports for Perl programs.
perl -MO=Xref[,OPTIONS] scriptname.plx
Is there a pretty-printer (formatter) for Perl?
"Perltidy" is a Perl script which indents and reformats Perl scripts to make them easier to read by
trying to follow the rules of the perlstyle. If you write Perl scripts, or spend much time reading
them, you will probably find it useful. It is available at http://perltidy.sourceforge.net .
Of course, if you simply follow the guidelines in perlstyle, you shouldn't need to reformat. The
habit of formatting your code as you write it will help prevent bugs. Your editor can and should
help you with this. The perl-mode or newer cperl-mode for emacs can provide remarkable amounts of
help with most (but not all) code, and even less programmable editors can provide significant
assistance. Tom Christiansen and many other VI users swear by the following settings in vi and its
clones:
set ai sw=4
map! ^O {^M}^[O^T
Put that in your .exrc file (replacing the caret characters with control characters) and away you go.
In insert mode, ^T is for indenting, ^D is for undenting, and ^O is for blockdenting--as it were. A
more complete example, with comments, can be found at
http://www.cpan.org/authors/id/TOMC/scripts/toms.exrc.gz
The a2ps http://www-inf.enst.fr/%7Edemaille/a2ps/black+white.ps.gz does lots of things related to
generating nicely printed output of documents.
Is there a ctags for Perl?
(contributed by brian d foy)
Ctags uses an index to quickly find things in source code, and many popular editors support ctags for
several different languages, including Perl.
Exuberent ctags supports Perl: http://ctags.sourceforge.net/
You might also try pltags: http://www.mscha.com/pltags.zip
Is there an IDE or Windows Perl Editor?
Perl programs are just plain text, so any editor will do.
If you're on Unix, you already have an IDE--Unix itself. The Unix philosophy is the philosophy of
several small tools that each do one thing and do it well. It's like a carpenter's toolbox.
If you want an IDE, check the following (in alphabetical order, not order of preference):
Eclipse
http://e-p-i-c.sf.net/
The Eclipse Perl Integration Project integrates Perl editing/debugging with Eclipse.
Enginsite
http://www.enginsite.com/
Perl Editor by EngInSite is a complete integrated development environment (IDE) for creating,
testing, and debugging Perl scripts; the tool runs on Windows 9x/NT/2000/XP or later.
Komodo
http://www.ActiveState.com/Products/Komodo/
ActiveState's cross-platform (as of October 2004, that's Windows, Linux, and Solaris), multi-language multilanguage
language IDE has Perl support, including a regular expression debugger and remote debugging.
Notepad++
http://notepad-plus.sourceforge.net/
Open Perl IDE
http://open-perl-ide.sourceforge.net/
Open Perl IDE is an integrated development environment for writing and debugging Perl scripts
with ActiveState's ActivePerl distribution under Windows 95/98/NT/2000.
OptiPerl
http://www.optiperl.com/
OptiPerl is a Windows IDE with simulated CGI environment, including debugger and syntax
highlighting editor.
Padre
http://padre.perlide.org/
Padre is cross-platform IDE for Perl written in Perl using wxWidgets to provide a native look and
feel. It's open source under the Artistic License.
PerlBuilder
http://www.solutionsoft.com/perl.htm
PerlBuilder is an integrated development environment for Windows that supports Perl development.
visiPerl+
http://helpconsulting.net/visiperl/
From Help Consulting, for Windows.
Visual Perl
http://www.activestate.com/Products/Visual_Perl/
Visual Perl is a Visual Studio.NET plug-in from ActiveState.
Zeus
http://www.zeusedit.com/lookmain.html
Zeus for Window is another Win32 multi-language editor/IDE that comes with support for Perl:
For editors: if you're on Unix you probably have vi or a vi clone already, and possibly an emacs too,
so you may not need to download anything. In any emacs the cperl-mode (M-x cperl-mode) gives you
perhaps the best available Perl editing mode in any editor.
If you are using Windows, you can use any editor that lets you work with plain text, such as NotePad
or WordPad. Word processors, such as Microsoft Word or WordPerfect, typically do not work since they
insert all sorts of behind-the-scenes information, although some allow you to save files as "Text
Only". You can also download text editors designed specifically for programming, such as Textpad (
http://www.textpad.com/ ) and UltraEdit ( http://www.ultraedit.com/ ), among others.
If you are using MacOS, the same concerns apply. MacPerl (for Classic environments) comes with a
simple editor. Popular external editors are BBEdit ( http://www.bbedit.com/ ) or Alpha (
http://www.his.com/~jguyer/Alpha/Alpha8.html ). MacOS X users can use Unix editors as well.
GNU Emacs
http://www.gnu.org/software/emacs/windows/ntemacs.html
MicroEMACS
http://www.microemacs.de/
XEmacs
http://www.xemacs.org/Download/index.html
Jed http://space.mit.edu/~davis/jed/
or a vi clone such as
Elvis
ftp://ftp .cs.pdx.edu/pub/elvis/ http://www .fh-wedel.de/elvis/
Vile
http://dickey.his.com/vile/vile.html
Vim http://www.vim.org/
For vi lovers in general, Windows or elsewhere:
http://www.thomer.com/thomer/vi/vi.html
nvi ( http://www.bostic.com/vi/ , available from CPAN in src/misc/) is yet another vi clone,
unfortunately not available for Windows, but in Unix platforms you might be interested in trying it
out, firstly because strictly speaking it is not a vi clone, it is the real vi, or the new
incarnation of it, and secondly because you can embed Perl inside it to use Perl as the scripting
language. nvi is not alone in this, though: at least also vim and vile offer an embedded Perl.
The following are Win32 multilanguage editor/IDEs that support Perl:
Codewright
http://www.borland.com/codewright/
MultiEdit
http://www.MultiEdit.com/
SlickEdit
http://www.slickedit.com/
ConTEXT
http://www.contexteditor.org/
There is also a toyedit Text widget based editor written in Perl that is distributed with the Tk
module on CPAN. The ptkdb ( http://ptkdb.sourceforge.net/ ) is a Perl/tk based debugger that acts as
a development environment of sorts. Perl Composer ( http://perlcomposer.sourceforge.net/ ) is an IDE
for Perl/Tk GUI creation.
In addition to an editor/IDE you might be interested in a more powerful shell environment for Win32.
Your options include
Bash
from the Cygwin package ( http://sources.redhat.com/cygwin/ )
Ksh from the MKS Toolkit ( http://www.mkssoftware.com/ ), or the Bourne shell of the U/WIN
environment ( http://www.research.att.com/sw/tools/uwin/ )
Tcsh
ftp://ftp.astron.com/pub/tcsh/ , see also http://www.primate.wisc.edu/software/csh-tcsh-book/
Zsh http://www.zsh.org/
MKS and U/WIN are commercial (U/WIN is free for educational and research purposes), Cygwin is covered
by the GNU General Public License (but that shouldn't matter for Perl use). The Cygwin, MKS, and
U/WIN all contain (in addition to the shells) a comprehensive set of standard Unix toolkit utilities.
If you're transferring text files between Unix and Windows using FTP be sure to transfer them in
ASCII mode so the ends of lines are appropriately converted.
On Mac OS the MacPerl Application comes with a simple 32k text editor that behaves like a rudimentary
IDE. In contrast to the MacPerl Application the MPW Perl tool can make use of the MPW Shell itself
as an editor (with no 32k limit).
Affrus
is a full Perl development environment with full debugger support ( http://www.latenightsw.com ).
Alpha
is an editor, written and extensible in Tcl, that nonetheless has built in support for several
popular markup and programming languages including Perl and HTML (
http://www.his.com/~jguyer/Alpha/Alpha8.html ).
BBEdit and BBEdit Lite
are text editors for Mac OS that have a Perl sensitivity mode ( http://web.barebones.com/ ).
Where can I get Perl macros for vi?
For a complete version of Tom Christiansen's vi configuration file, see
http://www.cpan.org/authors/Tom_Christiansen/scripts/toms.exrc.gz , the standard benchmark file for
vi emulators. The file runs best with nvi, the current version of vi out of Berkeley, which
incidentally can be built with an embedded Perl interpreter--see http://www.cpan.org/src/misc/ .
Where can I get perl-mode or cperl-mode for emacs?
Since Emacs version 19 patchlevel 22 or so, there have been both a perl-mode.el and support for the
Perl debugger built in. These should come with the standard Emacs 19 distribution.
Note that the perl-mode of emacs will have fits with "main'foo" (single quote), and mess up the
indentation and highlighting. You are probably using "main::foo" in new Perl code anyway, so this
shouldn't be an issue.
For CPerlMode, see http://www.emacswiki.org/cgi-bin/wiki/CPerlMode
How can I use curses with Perl?
The Curses module from CPAN provides a dynamically loadable object module interface to a curses
library. A small demo can be found at the directory
http://www.cpan.org/authors/Tom_Christiansen/scripts/rep.gz ; this program repeats a command and
updates the screen as needed, rendering rep ps axu similar to top.
How can I write a GUI (X, Tk, Gtk, etc.) in Perl?
(contributed by Ben Morrow)
There are a number of modules which let you write GUIs in Perl. Most GUI toolkits have a perl
interface: an incomplete list follows.
Tk This works under Unix and Windows, and the current version doesn't look half as bad under Windows
as it used to. Some of the gui elements still don't 'feel' quite right, though. The interface is
very natural and 'perlish', making it easy to use in small scripts that just need a simple gui.
It hasn't been updated in a while.
Wx This is a Perl binding for the cross-platform wxWidgets toolkit ( http://www.wxwidgets.org ). It
works under Unix, Win32 and Mac OS X, using native widgets (Gtk under Unix). The interface
follows the C++ interface closely, but the documentation is a little sparse for someone who
doesn't know the library, mostly just referring you to the C++ documentation.
Gtk and Gtk2
These are Perl bindings for the Gtk toolkit ( http://www.gtk.org ). The interface changed
significantly between versions 1 and 2 so they have separate Perl modules. It runs under Unix,
Win32 and Mac OS X (currently it requires an X server on Mac OS, but a 'native' port is
underway), and the widgets look the same on every plaform: i.e., they don't match the native
widgets. As with Wx, the Perl bindings follow the C API closely, and the documentation requires
you to read the C documentation to understand it.
Win32::GUI
This provides access to most of the Win32 GUI widgets from Perl. Obviously, it only runs under
Win32, and uses native widgets. The Perl interface doesn't really follow the C interface: it's
been made more Perlish, and the documentation is pretty good. More advanced stuff may require
familiarity with the C Win32 APIs, or reference to MSDN.
CamelBones
CamelBones ( http://camelbones.sourceforge.net ) is a Perl interface to Mac OS X's Cocoa GUI
toolkit, and as such can be used to produce native GUIs on Mac OS X. It's not on CPAN, as it
requires frameworks that CPAN.pm doesn't know how to install, but installation is via the
standard OSX package installer. The Perl API is, again, very close to the ObjC API it's wrapping,
and the documentation just tells you how to translate from one to the other.
Qt There is a Perl interface to TrollTech's Qt toolkit, but it does not appear to be maintained.
Athena
Sx is an interface to the Athena widget set which comes with X, but again it appears not to be
much used nowadays.
How can I make my Perl program run faster?
The best way to do this is to come up with a better algorithm. This can often make a dramatic
difference. Jon Bentley's book Programming Pearls (that's not a misspelling!) has some good tips on
optimization, too. Advice on benchmarking boils down to: benchmark and profile to make sure you're
optimizing the right part, look for better algorithms instead of microtuning your code, and when all
else fails consider just buying faster hardware. You will probably want to read the answer to the
earlier question "How do I profile my Perl programs?" if you haven't done so already.
A different approach is to autoload seldom-used Perl code. See the AutoSplit and AutoLoader modules
in the standard distribution for that. Or you could locate the bottleneck and think about writing
just that part in C, the way we used to take bottlenecks in C code and write them in assembler.
Similar to rewriting in C, modules that have critical sections can be written in C (for instance, the
PDL module from CPAN).
If you're currently linking your perl executable to a shared libc.so, you can often gain a 10-25%
performance benefit by rebuilding it to link with a static libc.a instead. This will make a bigger
perl executable, but your Perl programs (and programmers) may thank you for it. See the INSTALL file
in the source distribution for more information.
The undump program was an ancient attempt to speed up Perl program by storing the already-compiled
form to disk. This is no longer a viable option, as it only worked on a few architectures, and
wasn't a good solution anyway.
How can I make my Perl program take less memory?
When it comes to time-space tradeoffs, Perl nearly always prefers to throw memory at a problem.
Scalars in Perl use more memory than strings in C, arrays take more than that, and hashes use even
more. While there's still a lot to be done, recent releases have been addressing these issues. For
example, as of 5.004, duplicate hash keys are shared amongst all hashes using them, so require no
reallocation.
In some cases, using substr() or vec() to simulate arrays can be highly beneficial. For example, an
array of a thousand booleans will take at least 20,000 bytes of space, but it can be turned into one
125-byte bit vector--a considerable memory savings. The standard Tie::SubstrHash module can also
help for certain types of data structure. If you're working with specialist data structures
(matrices, for instance) modules that implement these in C may use less memory than equivalent Perl
modules.
Another thing to try is learning whether your Perl was compiled with the system malloc or with Perl's
builtin malloc. Whichever one it is, try using the other one and see whether this makes a
difference. Information about malloc is in the INSTALL file in the source distribution. You can
find out whether you are using perl's malloc by typing "perl -V:usemymalloc".
Of course, the best way to save memory is to not do anything to waste it in the first place. Good
programming practices can go a long way toward this:
• Don't slurp!
Don't read an entire file into memory if you can process it line by line. Or more concretely, use
a loop like this:
#
# Good Idea
#
while (<FILE>) {
# ...
}
instead of this:
#
# Bad Idea
#
@data = <FILE>;
foreach (@data) {
# ...
}
When the files you're processing are small, it doesn't much matter which way you do it, but it
makes a huge difference when they start getting larger.
• Use map and grep selectively
Remember that both map and grep expect a LIST argument, so doing this:
@wanted = grep {/pattern/} <FILE>;
will cause the entire file to be slurped. For large files, it's better to loop:
while (<FILE>) {
push(@wanted, $_) if /pattern/;
}
• Avoid unnecessary quotes and stringification
Don't quote large strings unless absolutely necessary:
my $copy = "$large_string";
makes 2 copies of $large_string (one for $copy and another for the quotes), whereas
my $copy = $large_string;
only makes one copy.
Ditto for stringifying large arrays:
{
local $, = "\n";
print @big_array;
}
is much more memory-efficient than either
print join "\n", @big_array;
or
{
local $" = "\n";
print "@big_array";
}
• Pass by reference
Pass arrays and hashes by reference, not by value. For one thing, it's the only way to pass
multiple lists or hashes (or both) in a single call/return. It also avoids creating a copy of all
the contents. This requires some judgement, however, because any changes will be propagated back
to the original data. If you really want to mangle (er, modify) a copy, you'll have to sacrifice
the memory needed to make one.
• Tie large variables to disk.
For "big" data stores (i.e. ones that exceed available memory) consider using one of the DB
modules to store it on disk instead of in RAM. This will incur a penalty in access time, but
that's probably better than causing your hard disk to thrash due to massive swapping.
Is it safe to return a reference to local or lexical data?
Yes. Perl's garbage collection system takes care of this so everything works out right.
sub makeone {
my @a = ( 1 .. 10 );
return \@a;
}
for ( 1 .. 10 ) {
push @many, makeone();
}
print $many[4][5], "\n";
print "@many\n";
How can I free an array or hash so my program shrinks?
(contributed by Michael Carman)
You usually can't. Memory allocated to lexicals (i.e. my() variables) cannot be reclaimed or reused
even if they go out of scope. It is reserved in case the variables come back into scope. Memory
allocated to global variables can be reused (within your program) by using undef() and/or delete().
On most operating systems, memory allocated to a program can never be returned to the system. That's
why long-running programs sometimes re- exec themselves. Some operating systems (notably, systems
that use mmap(2) for allocating large chunks of memory) can reclaim memory that is no longer used,
but on such systems, perl must be configured and compiled to use the OS's malloc, not perl's.
In general, memory allocation and de-allocation isn't something you can or should be worrying about
much in Perl.
See also "How can I make my Perl program take less memory?"
How can I make my CGI script more efficient?
Beyond the normal measures described to make general Perl programs faster or smaller, a CGI program
has additional issues. It may be run several times per second. Given that each time it runs it will
need to be re-compiled and will often allocate a megabyte or more of system memory, this can be a
killer. Compiling into C isn't going to help you because the process start-up overhead is where the
bottleneck is.
There are two popular ways to avoid this overhead. One solution involves running the Apache HTTP
server (available from http://www.apache.org/ ) with either of the mod_perl or mod_fastcgi plugin
modules.
With mod_perl and the Apache::Registry module (distributed with mod_perl), httpd will run with an
embedded Perl interpreter which pre-compiles your script and then executes it within the same address
space without forking. The Apache extension also gives Perl access to the internal server API, so
modules written in Perl can do just about anything a module written in C can. For more on mod_perl,
see http://perl.apache.org/
With the FCGI module (from CPAN) and the mod_fastcgi module (available from http://www.fastcgi.com/ )
each of your Perl programs becomes a permanent CGI daemon process.
Both of these solutions can have far-reaching effects on your system and on the way you write your
CGI programs, so investigate them with care.
See http://www.cpan.org/modules/by-category/15_World_Wide_Web_HTML_HTTP_CGI/ .
How can I hide the source for my Perl program?
Delete it. :-) Seriously, there are a number of (mostly unsatisfactory) solutions with varying levels
of "security".
First of all, however, you can't take away read permission, because the source code has to be
readable in order to be compiled and interpreted. (That doesn't mean that a CGI script's source is
readable by people on the web, though--only by people with access to the filesystem.) So you have to
leave the permissions at the socially friendly 0755 level.
Some people regard this as a security problem. If your program does insecure things and relies on
people not knowing how to exploit those insecurities, it is not secure. It is often possible for
someone to determine the insecure things and exploit them without viewing the source. Security
through obscurity, the name for hiding your bugs instead of fixing them, is little security indeed.
You can try using encryption via source filters (Starting from Perl 5.8 the Filter::Simple and
Filter::Util::Call modules are included in the standard distribution), but any decent programmer will
be able to decrypt it. You can try using the byte code compiler and interpreter described later in
perlfaq3, but the curious might still be able to de-compile it. You can try using the native-code
compiler described later, but crackers might be able to disassemble it. These pose varying degrees
of difficulty to people wanting to get at your code, but none can definitively conceal it (true of
every language, not just Perl).
It is very easy to recover the source of Perl programs. You simply feed the program to the perl
interpreter and use the modules in the B:: hierarchy. The B::Deparse module should be able to defeat
most attempts to hide source. Again, this is not unique to Perl.
If you're concerned about people profiting from your code, then the bottom line is that nothing but a
restrictive license will give you legal security. License your software and pepper it with
threatening statements like "This is unpublished proprietary software of XYZ Corp. Your access to it
does not give you permission to use it blah blah blah." We are not lawyers, of course, so you should
see a lawyer if you want to be sure your license's wording will stand up in court.
How can I compile my Perl program into byte code or C?
(contributed by brian d foy)
In general, you can't do this. There are some things that may work for your situation though.
People usually ask this question because they want to distribute their works without giving away the
source code, and most solutions trade disk space for convenience. You probably won't see much of a
speed increase either, since most solutions simply bundle a Perl interpreter in the final product
(but see "How can I make my Perl program run faster?").
The Perl Archive Toolkit ( http://par.perl.org/ ) is Perl's analog to Java's JAR. It's freely
available and on CPAN ( http://search.cpan.org/dist/PAR/ ).
There are also some commercial products that may work for you, although you have to buy a license for
them.
The Perl Dev Kit ( http://www.activestate.com/Products/Perl_Dev_Kit/ ) from ActiveState can "Turn
your Perl programs into ready-to-run executables for HP-UX, Linux, Solaris and Windows."
Perl2Exe ( http://www.indigostar.com/perl2exe.htm ) is a command line program for converting perl
scripts to executable files. It targets both Windows and Unix platforms.
How can I get "#!perl" to work on [MS-DOS,NT,...]?
For OS/2 just use
extproc perl -S -your_switches
as the first line in "*.cmd" file ("-S" due to a bug in cmd.exe's "extproc" handling). For DOS one
should first invent a corresponding batch file and codify it in "ALTERNATE_SHEBANG" (see the dosish.h
file in the source distribution for more information).
The Win95/NT installation, when using the ActiveState port of Perl, will modify the Registry to
associate the ".pl" extension with the perl interpreter. If you install another port, perhaps even
building your own Win95/NT Perl from the standard sources by using a Windows port of gcc (e.g., with
cygwin or mingw32), then you'll have to modify the Registry yourself. In addition to associating
".pl" with the interpreter, NT people can use: "SET PATHEXT=%PATHEXT%;.PL" to let them run the
program "install-linux.pl" merely by typing "install-linux".
Under "Classic" MacOS, a perl program will have the appropriate Creator and Type, so that double-clicking doubleclicking
clicking them will invoke the MacPerl application. Under Mac OS X, clickable apps can be made from
any "#!" script using Wil Sanchez' DropScript utility: http://www.wsanchez.net/software/ .
IMPORTANT!: Whatever you do, PLEASE don't get frustrated, and just throw the perl interpreter into
your cgi-bin directory, in order to get your programs working for a web server. This is an EXTREMELY
big security risk. Take the time to figure out how to do it correctly.
Can I write useful Perl programs on the command line?
Yes. Read perlrun for more information. Some examples follow. (These assume standard Unix shell
quoting rules.)
# sum first and last fields
perl -lane 'print $F[0] + $F[-1]' *
# identify text files
perl -le 'for(@ARGV) {print if -f && -T _}' *
# remove (most) comments from C program
perl -0777 -pe 's{/\*.*?\*/}{}gs' foo.c
# make file a month younger than today, defeating reaper daemons
perl -e '$X=24*60*60; utime(time(),time() + 30 * $X,@ARGV)' *
# find first unused uid
perl -le '$i++ while getpwuid($i); print $i'
# display reasonable manpath
echo $PATH | perl -nl -072 -e '
s![^/+]*$!man!&&-d&&!$s{$_}++&&push@m,$_;END{print"@m"}'
OK, the last one was actually an Obfuscated Perl Contest entry. :-)
Why don't Perl one-liners work on my DOS/Mac/VMS system?
The problem is usually that the command interpreters on those systems have rather different ideas
about quoting than the Unix shells under which the one-liners were created. On some systems, you may
have to change single-quotes to double ones, which you must NOT do on Unix or Plan9 systems. You
might also have to change a single % to a %%.
For example:
# Unix (including Mac OS X)
perl -e 'print "Hello world\n"'
# DOS, etc.
perl -e "print \"Hello world\n\""
# Mac Classic
print "Hello world\n"
(then Run "Myscript" or Shift-Command-R)
# MPW
perl -e 'print "Hello world\n"'
# VMS
perl -e "print ""Hello world\n"""
The problem is that none of these examples are reliable: they depend on the command interpreter.
Under Unix, the first two often work. Under DOS, it's entirely possible that neither works. If 4DOS
was the command shell, you'd probably have better luck like this:
perl -e "print <Ctrl-x>"Hello world\n<Ctrl-x>""
Under the Mac, it depends which environment you are using. The MacPerl shell, or MPW, is much like
Unix shells in its support for several quoting variants, except that it makes free use of the Mac's
non-ASCII characters as control characters.
Using qq(), q(), and qx(), instead of "double quotes", 'single quotes', and `backticks`, may make
one-liners easier to write.
There is no general solution to all of this. It is a mess.
[Some of this answer was contributed by Kenneth Albanowski.]
Where can I learn about CGI or Web programming in Perl?
For modules, get the CGI or LWP modules from CPAN. For textbooks, see the two especially dedicated
to web stuff in the question on books. For problems and questions related to the web, like "Why do I
get 500 Errors" or "Why doesn't it run from the browser right when it runs fine on the command line",
see the troubleshooting guides and references in perlfaq9 or in the CGI MetaFAQ:
http://www.perl.org/CGI_MetaFAQ.html
Where can I learn about object-oriented Perl programming?
A good place to start is perltoot, and you can use perlobj, perlboot, perltoot, perltooc, and perlbot
for reference.
A good book on OO on Perl is the "Object-Oriented Perl" by Damian Conway from Manning Publications,
or "Intermediate Perl" by Randal Schwartz, brian d foy, and Tom Phoenix from O'Reilly Media.
Where can I learn about linking C with Perl?
If you want to call C from Perl, start with perlxstut, moving on to perlxs, xsubpp, and perlguts. If
you want to call Perl from C, then read perlembed, perlcall, and perlguts. Don't forget that you can
learn a lot from looking at how the authors of existing extension modules wrote their code and solved
their problems.
You might not need all the power of XS. The Inline::C module lets you put C code directly in your
Perl source. It handles all the magic to make it work. You still have to learn at least some of the
perl API but you won't have to deal with the complexity of the XS support files.
I've read perlembed, perlguts, etc., but I can't embed perl in my C program; what am I doing wrong?
Download the ExtUtils::Embed kit from CPAN and run `make test'. If the tests pass, read the pods
again and again and again. If they fail, see perlbug and send a bug report with the output of "make
test TEST_VERBOSE=1" along with "perl -V".
When I tried to run my script, I got this message. What does it mean?
A complete list of Perl's error messages and warnings with explanatory text can be found in perldiag.
You can also use the splain program (distributed with Perl) to explain the error messages:
perl program 2>diag.out
splain [-v] [-p] diag.out
or change your program to explain the messages for you:
use diagnostics;
or
use diagnostics -verbose;
What's MakeMaker?
(contributed by brian d foy)
The "ExtUtils::MakeMaker" module, better known simply as "MakeMaker", turns a Perl script, typically
called "Makefile.PL", into a Makefile. The Unix tool "make" uses this file to manage dependencies
and actions to process and install a Perl distribution.
AUTHOR AND COPYRIGHT
Copyright (c) 1997-2010 Tom Christiansen, Nathan Torkington, and other authors as noted. All rights
reserved.
This documentation is free; you can redistribute it and/or modify it under the same terms as Perl
itself.
Irrespective of its distribution, all code examples here are in the public domain. You are permitted
and encouraged to use this code and any derivatives thereof in your own programs for fun or for
profit as you see fit. A simple comment in the code giving credit to the FAQ would be courteous but
is not required.
perl v5.12.5 2012-11-03 PERLFAQ3(1)
|
Сообщение о проблемах
Способ сообщить о проблеме с этой страницей руководства зависит от типа проблемы:
- Ошибки содержания
- Ошибки отчета в содержании этой документации к проекту Perl. (См. perlbug (1) для инструкций представления.)
- Отчеты об ошибках
- Сообщите об ошибках в функциональности описанного инструмента или API к Apple через Генератор отчетов Ошибки и к проекту Perl, использующему perlbug (1).
- Форматирование проблем
- Отчет, форматирующий ошибки в интерактивной версии этих страниц со ссылками на отзыв ниже.