Страницы справочника OS X

Эта страница руководства для  версии 10.9 Mac OS X

Читать страницы руководства

XXD(1)                                                                                                XXD(1)



NAME
       xxd - make a hexdump or do the reverse.

SYNOPSIS
       xxd -h[elp]
       xxd [options] [infile [outfile]]
       xxd -r[evert] [options] [infile [outfile]]

DESCRIPTION
       xxd creates a hex dump of a given file or standard input.  It can also convert a hex dump back to its
       original binary form.  Like uuencode(1) and uudecode(1) it allows the transmission of binary data  in
       a  `mail-safe' ASCII representation, but has the advantage of decoding to standard output.  Moreover,
       it can be used to perform binary file patching.

OPTIONS
       If no infile is given, standard input is read.  If infile is specified as a `-' character, then input
       is  taken  from standard input.  If no outfile is given (or a `-' character is in its place), results
       are sent to standard output.

       Note that a "lazy" parser is used which does not check for more than the first option letter,  unless
       the  option  is followed by a parameter.  Spaces between a single option letter and its parameter are
       optional.  Parameters to options can be specified in decimal, hexadecimal or  octal  notation.   Thus
       -c8, -c 8, -c 010 and -cols 8 are all equivalent.


       -a | -autoskip
              toggle autoskip: A single '*' replaces nul-lines.  Default off.

       -b | -bits
              Switch  to bits (binary digits) dump, rather than hexdump.  This option writes octets as eight
              digits "1"s and "0"s instead of a normal hexadecimal dump. Each line is  preceded  by  a  line
              number  in  hexadecimal  and followed by an ascii (or ebcdic) representation. The command line
              switches -r, -p, -i do not work with this mode.

       -c cols | -cols cols
              format <cols> octets per line. Default 16 (-i: 12, -ps: 30, -b: 6). Max 256.

       -E | -EBCDIC
              Change the character encoding in the righthand column from ASCII to  EBCDIC.   This  does  not
              change  the  hexadecimal representation. The option is meaningless in combinations with -r, -p
              or -i.

       -g bytes | -groupsize bytes
              separate the output of every <bytes> bytes (two hex characters or eight bit-digits each) by  a
              whitespace.  Specify -g _ to suppress grouping.  <Bytes> defaults to 2 in normal mode and 1 in
              bits mode.  Grouping does not apply to postscript or include style.

       -h | -help
              print a summary of available commands and exit.  No hex dumping is performed.

       -i | -include
              output in C include file style. A complete static array definition is written (named after the
              input file), unless xxd reads from stdin.

       -l len | -len len
              stop after writing <len> octets.

       -p | -ps | -postscript | -plain
              output in postscript continuous hexdump style. Also known as plain hexdump style.

       -r | -revert
              reverse  operation:  convert  (or  patch)  hexdump into binary.  If not writing to stdout, xxd
              writes into its output file without truncating it. Use the combination -r  -p  to  read  plain
              hexadecimal  dumps  without  line  number  information and without a particular column layout.
              Additional Whitespace and line-breaks are allowed anywhere.

       -seek offset
              When used after -r: revert with <offset> added to file positions found in hexdump.

       -s [+][-]seek
              start at <seek> bytes abs. (or rel.) infile offset.  + indicates that the seek is relative  to
              the  current  stdin file position (meaningless when not reading from stdin).  - indicates that
              the seek should be that many characters from the end of the input  (or  if  combined  with  +:
              before  the  current  stdin file position).  Without -s option, xxd starts at the current file
              position.

       -u     use upper case hex letters. Default is lower case.

       -v | -version
              show version string.

CAVEATS
       xxd -r has some builtin magic while evaluating line number information.  If the output file is  seek-able, seekable,
       able,  then the linenumbers at the start of each hexdump line may be out of order, lines may be miss-ing, missing,
       ing, or overlapping. In these cases xxd will lseek(2) to the next position. If the output file is not
       seekable, only gaps are allowed, which will be filled by null-bytes.

       xxd -r never generates parse errors. Garbage is silently skipped.

       When  editing  hexdumps,  please  note  that  xxd -r skips everything on the input line after reading
       enough columns of hexadecimal data (see option -c). This also means, that changes  to  the  printable
       ascii  (or  ebcdic)  columns are always ignored. Reverting a plain (or postscript) style hexdump with
       xxd -r -p does not depend on the correct number of columns. Here anything that looks like a  pair  of
       hex-digits is interpreted.

       Note the difference between
       % xxd -i file
       and
       % xxd -i < file

       xxd -s +seek may be different from xxd -s seek, as lseek(2) is used to "rewind" input.  A '+' makes a
       difference if the input source is stdin, and if stdin's file position is not at the start of the file
       by  the time xxd is started and given its input.  The following examples may help to clarify (or fur-
       ther confuse!)...

       Rewind stdin before reading; needed because the `cat' has already read to the end of stdin.
       % sh -c "cat > plain_copy; xxd -s _ > hex_copy" < file

       Hexdump from file position 0x480 (=1024+128) onwards.  The `+' sign means "relative  to  the  current
       position", thus the `128' adds to the 1k where dd left off.
       % sh -c "dd of=plain_snippet bs=1k count=1; xxd -s +128 > hex_snippet" < file

       Hexdump from file position 0x100 ( = 1024-768) on.
       % sh -c "dd of=plain_snippet bs=1k count=1; xxd -s +-768 > hex_snippet" < file

       However, this is a rare situation and the use of `+' is rarely needed.  The author prefers to monitor
       the effect of xxd with strace(1) or truss(1), whenever -s is used.

EXAMPLES
       Print everything but the first three lines (hex 0x30 bytes) of file.
       % xxd -s _x3_ file

       Print 3 lines (hex 0x30 bytes) from the end of file.
       % xxd -s -_x3_ file

       Print 120 bytes as continuous hexdump with 20 octets per line.
       % xxd -l 12_ -ps -c 2_ xxd.1
       2e54482058584420312022417567757374203139
       39362220224d616e75616c207061676520666f72
       20787864220a2e5c220a2e5c222032317374204d
       617920313939360a2e5c22204d616e2070616765
       20617574686f723a0a2e5c2220202020546f6e79
       204e7567656e74203c746f6e79407363746e7567

       Hexdump the first 120 bytes of this man page with 12 octets per line.
       % xxd -l 12_ -c 12 xxd.1
       0000000: 2e54 4820 5858 4420 3120 2241  .TH XXD 1 "A
       000000c: 7567 7573 7420 3139 3936 2220  ugust 1996"
       0000018: 224d 616e 7561 6c20 7061 6765  "Manual page
       0000024: 2066 6f72 2078 7864 220a 2e5c   for xxd"..\
       0000030: 220a 2e5c 2220 3231 7374 204d  "..\" 21st M
       000003c: 6179 2031 3939 360a 2e5c 2220  ay 1996..\"
       0000048: 4d61 6e20 7061 6765 2061 7574  Man page aut
       0000054: 686f 723a 0a2e 5c22 2020 2020  hor:..\"
       0000060: 546f 6e79 204e 7567 656e 7420  Tony Nugent
       000006c: 3c74 6f6e 7940 7363 746e 7567  <tony@sctnug

       Display just the date from the file xxd.1
       % xxd -s _x36 -l 13 -c 13 xxd.1
       0000036: 3231 7374 204d 6179 2031 3939 36  21st May 1996

       Copy input_file to output_file and prepend 100 bytes of value 0x00.
       % xxd input_file | xxd -r -s 1__ > output_file

       Patch the date in the file xxd.1
       % echo "_____37: 3574 68" | xxd -r - xxd.1
       % xxd -s _x36 -l 13 -c 13 xxd.1
       0000036: 3235 7468 204d 6179 2031 3939 36  25th May 1996

       Create a 65537 byte file with all bytes 0x00, except for the last one which is 'A' (hex 0x41).
       % echo "_1____: 41" | xxd -r > file

       Hexdump this file with autoskip.
       % xxd -a -c 12 file
       0000000: 0000 0000 0000 0000 0000 0000  ............
       *
       000fffc: 0000 0000 40                   ....A

       Create a 1 byte file containing a single 'A' character.   The  number  after  '-r  -s'  adds  to  the
       linenumbers found in the file; in effect, the leading bytes are suppressed.
       % echo "_1____: 41" | xxd -r -s -_x1____ > file

       Use xxd as a filter within an editor such as vim(1) to hexdump a region marked between `a' and `z'.
       :'a,'z!xxd

       Use  xxd  as  a filter within an editor such as vim(1) to recover a binary hexdump marked between `a'
       and `z'.
       :'a,'z!xxd -r

       Use xxd as a filter within an editor such as vim(1) to recover one line of a hexdump.  Move the  cur-sor cursor
       sor over the line and type:
       !!xxd -r

       Read single characters from a serial line
       % xxd -c1 < /dev/term/b &
       % stty < /dev/term/b -echo -opost -isig -icanon min 1
       % echo -n foo > /dev/term/b


RETURN VALUES
       The following error values are returned:

       0      no errors encountered.

       -1     operation not supported ( xxd -r -i still impossible).

       1      error while parsing options.

       2      problems with input file.

       3      problems with output file.

       4,5    desired seek position is unreachable.

SEE ALSO
       uuencode(1), uudecode(1), patch(1)

WARNINGS
       The tools weirdness matches its creators brain.  Use entirely at your own risk. Copy files. Trace it.
       Become a wizard.

VERSION
       This manual page documents xxd version 1.7

AUTHOR
       (c) 1990-1997 by Juergen Weigert
       <jnweiger@informatik.uni-erlangen.de>

       Distribute freely and credit me,
       make money and share with me,
       lose money and don't ask me.

       Manual page started by Tony Nugent
       <tony@sctnugen.ppp.gu.edu.au> <T.Nugent@sct.gu.edu.au>
       Small changes by Bram Moolenaar.  Edited by Juergen Weigert.




Manual page for xxd                              August 1996                                          XXD(1)