Config5.16 (15:00) страница руководства инструментов разработчика Mac OS X

Эта страница руководства является частью версии 5.0 Инструментов XCode

Получить эти инструменты:

Установите Инструменты XCode от developer.apple.com.

Если Вы выполняете версию Инструментов XCode кроме 5,0, просматриваете документацию локально:

В XCode
В Терминале, с помощью человека (1) команда

Читать страницы руководства

Страницы руководства предназначаются как справочник для людей, уже понимающих технологию.

Чтобы изучить, как руководство организовано или узнать о синтаксисе команды, прочитайте страницу руководства для страниц справочника (5).
Для получения дополнительной информации об этой технологии, ищите другую документацию в Библиотеке Разработчика Apple.
Для получения общей информации о записи сценариев оболочки, считайте Shell, Пишущий сценарий Учебника для начинающих.

Config(3pm) Perl Programmers Reference Guide Config(3pm)

NAME
Config - access Perl configuration information

SYNOPSIS
use Config;
if ($Config{usethreads}) {
print "has thread support\n"
}

use Config qw(myconfig config_sh config_vars config_re);

print myconfig();

print config_sh();

print config_re();

config_vars(qw(osname archname));

DESCRIPTION
The Config module contains all the information that was available to the "Configure" program at Perl
build time (over 900 values).

Shell variables from the config.sh file (written by Configure) are stored in the readonly-variable
%Config, indexed by their names.

Values stored in config.sh as 'undef' are returned as undefined values. The perl "exists" function
can be used to check if a named variable exists.

For a description of the variables, please have a look at the Glossary file, as written in the
Porting folder, or use the url: http://perl5.git.perl.org/perl.git/blob/HEAD:/Porting/Glossary

myconfig()
Returns a textual summary of the major perl configuration values. See also "-V" in "Command
Switches" in perlrun.

config_sh()
Returns the entire perl configuration information in the form of the original config.sh shell
variable assignment script.

config_re($regex)
Like config_sh() but returns, as a list, only the config entries who's names match the $regex.

config_vars(@names)
Prints to STDOUT the values of the named configuration variable. Each is printed on a separate
line in the form:

name='value';

Names which are unknown are output as "name='UNKNOWN';". See also "-V:name" in "Command
Switches" in perlrun.

bincompat_options()
Returns a list of C pre-processor options used when compiling this perl binary, which affect its
binary compatibility with extensions. "bincompat_options()" and "non_bincompat_options()" are
shown together in the output of "perl -V" as Compile-time options.

non_bincompat_options()
Returns a list of C pre-processor options used when compiling this perl binary, which do not
affect binary compatibility with extensions.

compile_date()
Returns the compile date (as a string), equivalent to what is shown by "perl -V"

local_patches()
Returns a list of the names of locally applied patches, equivalent to what is shown by "perl -V".

header_files()
Returns a list of the header files that should be used as dependencies for XS code, for this
version of Perl on this platform.

EXAMPLE
Here's a more sophisticated example of using %Config:

use Config;
use strict;

my %sig_num;
my @sig_name;
unless($Config{sig_name} && $Config{sig_num}) {
die "No sigs?";
} else {
my @names = split ' ', $Config{sig_name};
@sig_num{@names} = split ' ', $Config{sig_num};
foreach (@names) {
$sig_name[$sig_num{$_}] ||= $_;
}
}

print "signal #17 = $sig_name[17]\n";
if ($sig_num{ALRM}) {
print "SIGALRM is $sig_num{ALRM}\n";
}

WARNING
Because this information is not stored within the perl executable itself it is possible (but
unlikely) that the information does not relate to the actual perl binary which is being used to
access it.

The Config module is installed into the architecture and version specific library directory
($Config{installarchlib}) and it checks the perl version number when loaded.

The values stored in config.sh may be either single-quoted or double-quoted. Double-quoted strings
are handy for those cases where you need to include escape sequences in the strings. To avoid runtime
variable interpolation, any "$" and "@" characters are replaced by "\$" and "\@", respectively. This
isn't foolproof, of course, so don't embed "\$" or "\@" in double-quoted strings unless you're
willing to deal with the consequences. (The slashes will end up escaped and the "$" or "@" will
trigger variable interpolation)

GLOSSARY
Most "Config" variables are determined by the "Configure" script on platforms supported by it (which
is most UNIX platforms). Some platforms have custom-made "Config" variables, and may thus not have
some of the variables described below, or may have extraneous variables specific to that particular
port. See the port specific documentation in such cases.

_
"_a"
From Unix.U:

This variable defines the extension used for ordinary library files. For unix, it is .a. The .
is included. Other possible values include .lib.

"_exe"
From Unix.U:

This variable defines the extension used for executable files. "DJGPP", Cygwin and OS/2 use
.exe. Stratus "VOS" uses .pm. On operating systems which do not require a specific extension
for executable files, this variable is empty.

"_o"
From Unix.U:

This variable defines the extension used for object files. For unix, it is .o. The . is
included. Other possible values include .obj.

a
"afs"
From afs.U:

This variable is set to "true" if "AFS" (Andrew File System) is used on the system, "false"
otherwise. It is possible to override this with a hint value or command line option, but you'd
better know what you are doing.

"afsroot"
From afs.U:

This variable is by default set to /afs. In the unlikely case this is not the correct root, it is
possible to override this with a hint value or command line option. This will be used in
subsequent tests for AFSness in the configure and test process.

"alignbytes"
From alignbytes.U:

This variable holds the number of bytes required to align a double-- or a long double when
applicable. Usual values are 2, 4 and 8. The default is eight, for safety.

"ansi2knr"
From ansi2knr.U:

This variable is set if the user needs to run ansi2knr. Currently, this is not supported, so we
just abort.

"aphostname"
From d_gethname.U:

This variable contains the command which can be used to compute the host name. The command is
fully qualified by its absolute path, to make it safe when used by a process with super-user
privileges.

"api_revision"
From patchlevel.U:

The three variables, api_revision, api_version, and api_subversion, specify the version of the
oldest perl binary compatible with the present perl. In a full version string such as 5.6.1,
api_revision is the 5. Prior to 5.5.640, the format was a floating point number, like 5.00563.

perl.c:incpush() and lib/lib.pm will automatically search in $sitelib/.. for older directories
back to the limit specified by these api_ variables. This is only useful if you have a perl
library directory tree structured like the default one. See "INSTALL" for how this works. The
versioned site_perl directory was introduced in 5.005, so that is the lowest possible value. The
version list appropriate for the current system is determined in inc_version_list.U.

"XXX" To do: Since compatibility can depend on compile time options (such as bincompat,
longlong, etc.) it should (perhaps) be set by Configure, but currently it isn't. Currently, we
read a hard-wired value from patchlevel.h. Perhaps what we ought to do is take the hard-wired
value from patchlevel.h but then modify it if the current Configure options warrant.
patchlevel.h then would use an #ifdef guard.

"api_subversion"
From patchlevel.U:

"api_version"
From patchlevel.U:

The three variables, api_revision, api_version, and api_subversion, specify the version of the
oldest perl binary compatible with the present perl. In a full version string such as 5.6.1,
api_version is the 6. See api_revision for full details. As a special case, 5.5.0 is rendered
in the old-style as 5.005. (In the 5.005_0x maintenance series, this was the only versioned
directory in $sitelib.)

"api_versionstring"
From patchlevel.U:

This variable combines api_revision, api_version, and api_subversion in a format such as 5.6.1
(or 5_6_1) suitable for use as a directory name. This is filesystem dependent.

"ar"
From Loc.U:

This variable is used internally by Configure to determine the full pathname (if any) of the ar
program. After Configure runs, the value is reset to a plain "ar" and is not useful.

"archlib"
From archlib.U:

This variable holds the name of the directory in which the user wants to put architecture-dependent architecturedependent
dependent public library files for $package. It is most often a local directory such as
/usr/local/lib. Programs using this variable must be prepared to deal with filename expansion.

"archlibexp"
From archlib.U:

This variable is the same as the archlib variable, but is filename expanded at configuration
time, for convenient use.

"archname"
From archname.U:

This variable is a short name to characterize the current architecture. It is used mainly to
construct the default archlib.

"archname64"
From use64bits.U:

This variable is used for the 64-bitness part of $archname.

"archobjs"
From Unix.U:

This variable defines any additional objects that must be linked in with the program on this
architecture. On unix, it is usually empty. It is typically used to include emulations of unix
calls or other facilities. For perl on OS/2, for example, this would include os2/os2.obj.

"asctime_r_proto"
From d_asctime_r.U:

This variable encodes the prototype of asctime_r. It is zero if d_asctime_r is undef, and one of
the "REENTRANT_PROTO_T_ABC" macros of reentr.h if d_asctime_r is defined.

"awk"
From Loc.U:

This variable is used internally by Configure to determine the full pathname (if any) of the awk
program. After Configure runs, the value is reset to a plain "awk" and is not useful.

b
"baserev"
From baserev.U:

The base revision level of this package, from the .package file.

"bash"
From Loc.U:

This variable is defined but not used by Configure. The value is the empty string and is not
useful.

"bin"
From bin.U:

This variable holds the name of the directory in which the user wants to put publicly executable
images for the package in question. It is most often a local directory such as /usr/local/bin.
Programs using this variable must be prepared to deal with ~name substitution.

"bin_ELF"
From dlsrc.U:

This variable saves the result from configure if generated binaries are in "ELF" format. Only set
to defined when the test has actually been performed, and the result was positive.

"binexp"
From bin.U:

This is the same as the bin variable, but is filename expanded at configuration time, for use in
your makefiles.

"bison"
From Loc.U:

This variable is used internally by Configure to determine the full pathname (if any) of the
bison program. After Configure runs, the value is reset to a plain "bison" and is not useful.

"byacc"
From Loc.U:

This variable is used internally by Configure to determine the full pathname (if any) of the
byacc program. After Configure runs, the value is reset to a plain "byacc" and is not useful.

"byteorder"
From byteorder.U:

This variable holds the byte order in a "UV". In the following, larger digits indicate more
significance. The variable byteorder is either 4321 on a big-endian machine, or 1234 on a
little-endian, or 87654321 on a Cray ... or 3412 with weird order !

c
"c" From n.U:

This variable contains the \c string if that is what causes the echo command to suppress newline.
Otherwise it is null. Correct usage is $echo $n "prompt for a question: $c".

"castflags"
From d_castneg.U:

This variable contains a flag that precise difficulties the compiler has casting odd floating
values to unsigned long: 0 = ok 1 = couldn't cast < 0 2 = couldn't cast >= 0x80000000 4 =
couldn't cast in argument expression list

"cat"
From Loc.U:

This variable is used internally by Configure to determine the full pathname (if any) of the cat
program. After Configure runs, the value is reset to a plain "cat" and is not useful.

"cc"
From cc.U:

This variable holds the name of a command to execute a C compiler which can resolve multiple
global references that happen to have the same name. Usual values are "cc" and "gcc". Fervent
"ANSI" compilers may be called "c89". "AIX" has xlc.

"cccdlflags"
From dlsrc.U:

This variable contains any special flags that might need to be passed with "cc -c" to compile
modules to be used to create a shared library that will be used for dynamic loading. For hpux,
this should be +z. It is up to the makefile to use it.

"ccdlflags"
From dlsrc.U:

This variable contains any special flags that might need to be passed to cc to link with a shared
library for dynamic loading. It is up to the makefile to use it. For sunos 4.1, it should be
empty.

"ccflags"
From ccflags.U:

This variable contains any additional C compiler flags desired by the user. It is up to the
Makefile to use this.

"ccflags_uselargefiles"
From uselfs.U:

This variable contains the compiler flags needed by large file builds and added to ccflags by
hints files.

"ccname"
From Checkcc.U:

This can set either by hints files or by Configure. If using gcc, this is gcc, and if not,
usually equal to cc, unimpressive, no? Some platforms, however, make good use of this by storing
the flavor of the C compiler being used here. For example if using the Sun WorkShop suite,
ccname will be "workshop".

"ccsymbols"
From Cppsym.U:

The variable contains the symbols defined by the C compiler alone. The symbols defined by cpp or
by cc when it calls cpp are not in this list, see cppsymbols and cppccsymbols. The list is a
space-separated list of symbol=value tokens.

"ccversion"
From Checkcc.U:

This can set either by hints files or by Configure. If using a (non-gcc) vendor cc, this
variable may contain a version for the compiler.

"cf_by"
From cf_who.U:

Login name of the person who ran the Configure script and answered the questions. This is used to
tag both config.sh and config_h.SH.

"cf_email"
From cf_email.U:

Electronic mail address of the person who ran Configure. This can be used by units that require
the user's e-mail, like MailList.U.

"cf_time"
From cf_who.U:

Holds the output of the "date" command when the configuration file was produced. This is used to
tag both config.sh and config_h.SH.

"charbits"
From charsize.U:

This variable contains the value of the "CHARBITS" symbol, which indicates to the C program how
many bits there are in a character.

"charsize"
From charsize.U:

This variable contains the value of the "CHARSIZE" symbol, which indicates to the C program how
many bytes there are in a character.

"chgrp"
From Loc.U:

This variable is defined but not used by Configure. The value is the empty string and is not
useful.

"chmod"
From Loc.U:

This variable is used internally by Configure to determine the full pathname (if any) of the
chmod program. After Configure runs, the value is reset to a plain "chmod" and is not useful.

"chown"
From Loc.U:

This variable is defined but not used by Configure. The value is the empty string and is not
useful.

"clocktype"
From d_times.U:

This variable holds the type returned by times(). It can be long, or clock_t on "BSD" sites (in
which case <sys/types.h> should be included).

"comm"
From Loc.U:

This variable is used internally by Configure to determine the full pathname (if any) of the comm
program. After Configure runs, the value is reset to a plain "comm" and is not useful.

"compress"
From Loc.U:

This variable is defined but not used by Configure. The value is the empty string and is not
useful.

"config_arg0"
From Options.U:

This variable contains the string used to invoke the Configure command, as reported by the shell
in the $0 variable.

"config_argc"
From Options.U:

This variable contains the number of command-line arguments passed to Configure, as reported by
the shell in the $# variable. The individual arguments are stored as variables config_arg1,
config_arg2, etc.

"config_args"
From Options.U:

This variable contains a single string giving the command-line arguments passed to
Configure. Spaces within arguments, quotes, and escaped characters are not correctly
preserved. To reconstruct the command line, you must assemble the individual command line
pieces, given in config_arg[0-9]*.

"contains"
From contains.U:

This variable holds the command to do a grep with a proper return status. On most sane systems
it is simply "grep". On insane systems it is a grep followed by a cat followed by a test. This
variable is primarily for the use of other Configure units.

"cp"
From Loc.U:

This variable is used internally by Configure to determine the full pathname (if any) of the cp
program. After Configure runs, the value is reset to a plain "cp" and is not useful.

"cpio"
From Loc.U:

This variable is defined but not used by Configure. The value is the empty string and is not
useful.

"cpp"
From Loc.U:

This variable is used internally by Configure to determine the full pathname (if any) of the cpp
program. After Configure runs, the value is reset to a plain "cpp" and is not useful.

"cpp_stuff"
From cpp_stuff.U:

This variable contains an identification of the concatenation mechanism used by the C
preprocessor.

"cppccsymbols"
From Cppsym.U:

The variable contains the symbols defined by the C compiler when it calls cpp. The symbols
defined by the cc alone or cpp alone are not in this list, see ccsymbols and cppsymbols. The
list is a space-separated list of symbol=value tokens.

"cppflags"
From ccflags.U:

This variable holds the flags that will be passed to the C pre- processor. It is up to the
Makefile to use it.

"cpplast"
From cppstdin.U:

This variable has the same functionality as cppminus, only it applies to cpprun and not cppstdin.

"cppminus"
From cppstdin.U:

This variable contains the second part of the string which will invoke the C preprocessor on the
standard input and produce to standard output. This variable will have the value "-" if cppstdin
needs a minus to specify standard input, otherwise the value is "".

"cpprun"
From cppstdin.U:

This variable contains the command which will invoke a C preprocessor on standard input and put
the output to stdout. It is guaranteed not to be a wrapper and may be a null string if no
preprocessor can be made directly available. This preprocessor might be different from the one
used by the C compiler. Don't forget to append cpplast after the preprocessor options.

"cppstdin"
From cppstdin.U:

This variable contains the command which will invoke the C preprocessor on standard input and put
the output to stdout. It is primarily used by other Configure units that ask about preprocessor
symbols.

"cppsymbols"
From Cppsym.U:

The variable contains the symbols defined by the C preprocessor alone. The symbols defined by cc
or by cc when it calls cpp are not in this list, see ccsymbols and cppccsymbols. The list is a
space-separated list of symbol=value tokens.

"crypt_r_proto"
From d_crypt_r.U:

This variable encodes the prototype of crypt_r. It is zero if d_crypt_r is undef, and one of the
"REENTRANT_PROTO_T_ABC" macros of reentr.h if d_crypt_r is defined.

"cryptlib"
From d_crypt.U:

This variable holds -lcrypt or the path to a libcrypt.a archive if the crypt() function is not
defined in the standard C library. It is up to the Makefile to use this.

"csh"
From Loc.U:

This variable is used internally by Configure to determine the full pathname (if any) of the csh
program. After Configure runs, the value is reset to a plain "csh" and is not useful.

"ctermid_r_proto"
From d_ctermid_r.U:

This variable encodes the prototype of ctermid_r. It is zero if d_ctermid_r is undef, and one of
the "REENTRANT_PROTO_T_ABC" macros of reentr.h if d_ctermid_r is defined.

"ctime_r_proto"
From d_ctime_r.U:

This variable encodes the prototype of ctime_r. It is zero if d_ctime_r is undef, and one of the
"REENTRANT_PROTO_T_ABC" macros of reentr.h if d_ctime_r is defined.

d
"d__fwalk"
From d__fwalk.U:

This variable conditionally defines "HAS__FWALK" if _fwalk() is available to apply a function to
all the file handles.

"d_access"
From d_access.U:

This variable conditionally defines "HAS_ACCESS" if the access() system call is available to
check for access permissions using real IDs.

"d_accessx"
From d_accessx.U:

This variable conditionally defines the "HAS_ACCESSX" symbol, which indicates to the C program
that the accessx() routine is available.

"d_aintl"
From d_aintl.U:

This variable conditionally defines the "HAS_AINTL" symbol, which indicates to the C program that
the aintl() routine is available. If copysignl is also present we can emulate modfl.

"d_alarm"
From d_alarm.U:

This variable conditionally defines the "HAS_ALARM" symbol, which indicates to the C program that
the alarm() routine is available.

"d_archlib"
From archlib.U:

This variable conditionally defines "ARCHLIB" to hold the pathname of architecture-dependent
library files for $package. If $archlib is the same as $privlib, then this is set to undef.

"d_asctime64"
From d_timefuncs64.U:

This variable conditionally defines the HAS_ASCTIME64 symbol, which indicates to the C program
that the asctime64 () routine is available.

"d_asctime_r"
From d_asctime_r.U:

This variable conditionally defines the "HAS_ASCTIME_R" symbol, which indicates to the C program
that the asctime_r() routine is available.

"d_atolf"
From atolf.U:

This variable conditionally defines the "HAS_ATOLF" symbol, which indicates to the C program that
the atolf() routine is available.

"d_atoll"
From atoll.U:

This variable conditionally defines the "HAS_ATOLL" symbol, which indicates to the C program that
the atoll() routine is available.

"d_attribute_deprecated"
From d_attribut.U:

This variable conditionally defines "HASATTRIBUTE_DEPRECATED", which indicates that "GCC" can
handle the attribute for marking deprecated APIs

"d_attribute_format"
From d_attribut.U:

This variable conditionally defines "HASATTRIBUTE_FORMAT", which indicates the C compiler can
check for printf-like formats.

"d_attribute_malloc"
From d_attribut.U:

This variable conditionally defines "HASATTRIBUTE_MALLOC", which indicates the C compiler can
understand functions as having malloc-like semantics.

"d_attribute_nonnull"
From d_attribut.U:

This variable conditionally defines "HASATTRIBUTE_NONNULL", which indicates that the C compiler
can know that certain arguments must not be "NULL", and will check accordingly at compile time.

"d_attribute_noreturn"
From d_attribut.U:

This variable conditionally defines "HASATTRIBUTE_NORETURN", which indicates that the C compiler
can know that certain functions are guaranteed never to return.

"d_attribute_pure"
From d_attribut.U:

This variable conditionally defines "HASATTRIBUTE_PURE", which indicates that the C compiler can
know that certain functions are "pure" functions, meaning that they have no side effects, and
only rely on function input and/or global data for their results.

"d_attribute_unused"
From d_attribut.U:

This variable conditionally defines "HASATTRIBUTE_UNUSED", which indicates that the C compiler
can know that certain variables and arguments may not always be used, and to not throw warnings
if they don't get used.

"d_attribute_warn_unused_result"
From d_attribut.U:

This variable conditionally defines "HASATTRIBUTE_WARN_UNUSED_RESULT", which indicates that the C
compiler can know that certain functions have a return values that must not be ignored, such as
malloc() or open().

"d_bcmp"
From d_bcmp.U:

This variable conditionally defines the "HAS_BCMP" symbol if the bcmp() routine is available to
compare strings.

"d_bcopy"
From d_bcopy.U:

This variable conditionally defines the "HAS_BCOPY" symbol if the bcopy() routine is available to
copy strings.

"d_bsd"
From Guess.U:

This symbol conditionally defines the symbol "BSD" when running on a "BSD" system.

"d_bsdgetpgrp"
From d_getpgrp.U:

This variable conditionally defines "USE_BSD_GETPGRP" if getpgrp needs one arguments whereas
"USG" one needs none.

"d_bsdsetpgrp"
From d_setpgrp.U:

This variable conditionally defines "USE_BSD_SETPGRP" if setpgrp needs two arguments whereas
"USG" one needs none. See also d_setpgid for a "POSIX" interface.

"d_builtin_choose_expr"
From d_builtin.U:

This conditionally defines "HAS_BUILTIN_CHOOSE_EXPR", which indicates that the compiler supports
__builtin_choose_expr(x,y,z). This built-in function is analogous to the "x?y:z" operator in C,
except that the expression returned has its type unaltered by promotion rules. Also, the built-in
function does not evaluate the expression that was not chosen.

"d_builtin_expect"
From d_builtin.U:

This conditionally defines "HAS_BUILTIN_EXPECT", which indicates that the compiler supports
__builtin_expect(exp,c). You may use __builtin_expect to provide the compiler with branch
prediction information.

"d_bzero"
From d_bzero.U:

This variable conditionally defines the "HAS_BZERO" symbol if the bzero() routine is available to
set memory to 0.

"d_c99_variadic_macros"
From d_c99_variadic.U:

This variable conditionally defines the HAS_C99_VARIADIC_MACROS symbol, which indicates to the C
program that C99 variadic macros are available.

"d_casti32"
From d_casti32.U:

This variable conditionally defines CASTI32, which indicates whether the C compiler can cast
large floats to 32-bit ints.

"d_castneg"
From d_castneg.U:

This variable conditionally defines "CASTNEG", which indicates whether the C compiler can cast
negative float to unsigned.

"d_charvspr"
From d_vprintf.U:

This variable conditionally defines "CHARVSPRINTF" if this system has vsprintf returning type
(char*). The trend seems to be to declare it as "int vsprintf()".

"d_chown"
From d_chown.U:

This variable conditionally defines the "HAS_CHOWN" symbol, which indicates to the C program that
the chown() routine is available.

"d_chroot"
From d_chroot.U:

This variable conditionally defines the "HAS_CHROOT" symbol, which indicates to the C program
that the chroot() routine is available.

"d_chsize"
From d_chsize.U:

This variable conditionally defines the "CHSIZE" symbol, which indicates to the C program that
the chsize() routine is available to truncate files. You might need a -lx to get this routine.

"d_class"
From d_class.U:

This variable conditionally defines the "HAS_CLASS" symbol, which indicates to the C program that
the class() routine is available.

"d_clearenv"
From d_clearenv.U:

This variable conditionally defines the "HAS_CLEARENV" symbol, which indicates to the C program
that the clearenv () routine is available.

"d_closedir"
From d_closedir.U:

This variable conditionally defines "HAS_CLOSEDIR" if closedir() is available.

"d_cmsghdr_s"
From d_cmsghdr_s.U:

This variable conditionally defines the "HAS_STRUCT_CMSGHDR" symbol, which indicates that the
struct cmsghdr is supported.

"d_const"
From d_const.U:

This variable conditionally defines the "HASCONST" symbol, which indicates to the C program that
this C compiler knows about the const type.

"d_copysignl"
From d_copysignl.U:

This variable conditionally defines the "HAS_COPYSIGNL" symbol, which indicates to the C program
that the copysignl() routine is available. If aintl is also present we can emulate modfl.

"d_cplusplus"
From d_cplusplus.U:

This variable conditionally defines the "USE_CPLUSPLUS" symbol, which indicates that a C++
compiler was used to compiled Perl and will be used to compile extensions.

"d_crypt"
From d_crypt.U:

This variable conditionally defines the "CRYPT" symbol, which indicates to the C program that the
crypt() routine is available to encrypt passwords and the like.

"d_crypt_r"
From d_crypt_r.U:

This variable conditionally defines the "HAS_CRYPT_R" symbol, which indicates to the C program
that the crypt_r() routine is available.

"d_csh"
From d_csh.U:

This variable conditionally defines the "CSH" symbol, which indicates to the C program that the
C-shell exists.

"d_ctermid"
From d_ctermid.U:

This variable conditionally defines "CTERMID" if ctermid() is available to generate filename for
terminal.

"d_ctermid_r"
From d_ctermid_r.U:

This variable conditionally defines the "HAS_CTERMID_R" symbol, which indicates to the C program
that the ctermid_r() routine is available.

"d_ctime64"
From d_timefuncs64.U:

This variable conditionally defines the HAS_CTIME64 symbol, which indicates to the C program that
the ctime64 () routine is available.

"d_ctime_r"
From d_ctime_r.U:

This variable conditionally defines the "HAS_CTIME_R" symbol, which indicates to the C program
that the ctime_r() routine is available.

"d_cuserid"
From d_cuserid.U:

This variable conditionally defines the "HAS_CUSERID" symbol, which indicates to the C program
that the cuserid() routine is available to get character login names.

"d_dbl_dig"
From d_dbl_dig.U:

This variable conditionally defines d_dbl_dig if this system's header files provide "DBL_DIG",
which is the number of significant digits in a double precision number.

"d_dbminitproto"
From d_dbminitproto.U:

This variable conditionally defines the "HAS_DBMINIT_PROTO" symbol, which indicates to the C
program that the system provides a prototype for the dbminit() function. Otherwise, it is up to
the program to supply one.

"d_difftime"
From d_difftime.U:

This variable conditionally defines the "HAS_DIFFTIME" symbol, which indicates to the C program
that the difftime() routine is available.

"d_difftime64"
From d_timefuncs64.U:

This variable conditionally defines the HAS_DIFFTIME64 symbol, which indicates to the C program
that the difftime64 () routine is available.

"d_dir_dd_fd"
From d_dir_dd_fd.U:

This variable conditionally defines the "HAS_DIR_DD_FD" symbol, which indicates that the "DIR"
directory stream type contains a member variable called dd_fd.

"d_dirfd"
From d_dirfd.U:

This variable conditionally defines the "HAS_DIRFD" constant, which indicates to the C program
that dirfd() is available to return the file descriptor of a directory stream.

"d_dirnamlen"
From i_dirent.U:

This variable conditionally defines "DIRNAMLEN", which indicates to the C program that the length
of directory entry names is provided by a d_namelen field.

"d_dlerror"
From d_dlerror.U:

This variable conditionally defines the "HAS_DLERROR" symbol, which indicates to the C program
that the dlerror() routine is available.

"d_dlopen"
From d_dlopen.U:

This variable conditionally defines the "HAS_DLOPEN" symbol, which indicates to the C program
that the dlopen() routine is available.

"d_dlsymun"
From d_dlsymun.U:

This variable conditionally defines "DLSYM_NEEDS_UNDERSCORE", which indicates that we need to
prepend an underscore to the symbol name before calling dlsym().

"d_dosuid"
From d_dosuid.U:

This variable conditionally defines the symbol "DOSUID", which tells the C program that it should
insert setuid emulation code on hosts which have setuid #! scripts disabled.

"d_drand48_r"
From d_drand48_r.U:

This variable conditionally defines the HAS_DRAND48_R symbol, which indicates to the C program
that the drand48_r() routine is available.

"d_drand48proto"
From d_drand48proto.U:

This variable conditionally defines the HAS_DRAND48_PROTO symbol, which indicates to the C
program that the system provides a prototype for the drand48() function. Otherwise, it is up to
the program to supply one.

"d_dup2"
From d_dup2.U:

This variable conditionally defines HAS_DUP2 if dup2() is available to duplicate file
descriptors.

"d_eaccess"
From d_eaccess.U:

This variable conditionally defines the "HAS_EACCESS" symbol, which indicates to the C program
that the eaccess() routine is available.

"d_endgrent"
From d_endgrent.U:

This variable conditionally defines the "HAS_ENDGRENT" symbol, which indicates to the C program
that the endgrent() routine is available for sequential access of the group database.

"d_endgrent_r"
From d_endgrent_r.U:

This variable conditionally defines the "HAS_ENDGRENT_R" symbol, which indicates to the C program
that the endgrent_r() routine is available.

"d_endhent"
From d_endhent.U:

This variable conditionally defines "HAS_ENDHOSTENT" if endhostent() is available to close
whatever was being used for host queries.

"d_endhostent_r"
From d_endhostent_r.U:

This variable conditionally defines the "HAS_ENDHOSTENT_R" symbol, which indicates to the C
program that the endhostent_r() routine is available.

"d_endnent"
From d_endnent.U:

This variable conditionally defines "HAS_ENDNETENT" if endnetent() is available to close whatever
was being used for network queries.

"d_endnetent_r"
From d_endnetent_r.U:

This variable conditionally defines the "HAS_ENDNETENT_R" symbol, which indicates to the C
program that the endnetent_r() routine is available.

"d_endpent"
From d_endpent.U:

This variable conditionally defines "HAS_ENDPROTOENT" if endprotoent() is available to close
whatever was being used for protocol queries.

"d_endprotoent_r"
From d_endprotoent_r.U:

This variable conditionally defines the "HAS_ENDPROTOENT_R" symbol, which indicates to the C
program that the endprotoent_r() routine is available.

"d_endpwent"
From d_endpwent.U:

This variable conditionally defines the "HAS_ENDPWENT" symbol, which indicates to the C program
that the endpwent() routine is available for sequential access of the passwd database.

"d_endpwent_r"
From d_endpwent_r.U:

This variable conditionally defines the "HAS_ENDPWENT_R" symbol, which indicates to the C program
that the endpwent_r() routine is available.

"d_endsent"
From d_endsent.U:

This variable conditionally defines "HAS_ENDSERVENT" if endservent() is available to close
whatever was being used for service queries.

"d_endservent_r"
From d_endservent_r.U:

This variable conditionally defines the "HAS_ENDSERVENT_R" symbol, which indicates to the C
program that the endservent_r() routine is available.

"d_eofnblk"
From nblock_io.U:

This variable conditionally defines "EOF_NONBLOCK" if "EOF" can be seen when reading from a non-blocking nonblocking
blocking I/O source.

"d_eunice"
From Guess.U:

This variable conditionally defines the symbols "EUNICE" and "VAX", which alerts the C program
that it must deal with idiosyncrasies of "VMS".

"d_faststdio"
From d_faststdio.U:

This variable conditionally defines the "HAS_FAST_STDIO" symbol, which indicates to the C program
that the "fast stdio" is available to manipulate the stdio buffers directly.

"d_fchdir"
From d_fchdir.U:

This variable conditionally defines the "HAS_FCHDIR" symbol, which indicates to the C program
that the fchdir() routine is available.

"d_fchmod"
From d_fchmod.U:

This variable conditionally defines the "HAS_FCHMOD" symbol, which indicates to the C program
that the fchmod() routine is available to change mode of opened files.

"d_fchown"
From d_fchown.U:

This variable conditionally defines the "HAS_FCHOWN" symbol, which indicates to the C program
that the fchown() routine is available to change ownership of opened files.

"d_fcntl"
From d_fcntl.U:

This variable conditionally defines the "HAS_FCNTL" symbol, and indicates whether the fcntl()
function exists

"d_fcntl_can_lock"
From d_fcntl_can_lock.U:

This variable conditionally defines the "FCNTL_CAN_LOCK" symbol and indicates whether file
locking with fcntl() works.

"d_fd_macros"
From d_fd_set.U:

This variable contains the eventual value of the "HAS_FD_MACROS" symbol, which indicates if your
C compiler knows about the macros which manipulate an fd_set.

"d_fd_set"
From d_fd_set.U:

This variable contains the eventual value of the "HAS_FD_SET" symbol, which indicates if your C
compiler knows about the fd_set typedef.

"d_fds_bits"
From d_fd_set.U:

This variable contains the eventual value of the "HAS_FDS_BITS" symbol, which indicates if your
fd_set typedef contains the fds_bits member. If you have an fd_set typedef, but the dweebs who
installed it did a half-fast job and neglected to provide the macros to manipulate an fd_set,
"HAS_FDS_BITS" will let us know how to fix the gaffe.

"d_fgetpos"
From d_fgetpos.U:

This variable conditionally defines "HAS_FGETPOS" if fgetpos() is available to get the file
position indicator.

"d_finite"
From d_finite.U:

This variable conditionally defines the "HAS_FINITE" symbol, which indicates to the C program
that the finite() routine is available.

"d_finitel"
From d_finitel.U:

This variable conditionally defines the "HAS_FINITEL" symbol, which indicates to the C program
that the finitel() routine is available.

"d_flexfnam"
From d_flexfnam.U:

This variable conditionally defines the "FLEXFILENAMES" symbol, which indicates that the system
supports filenames longer than 14 characters.

"d_flock"
From d_flock.U:

This variable conditionally defines "HAS_FLOCK" if flock() is available to do file locking.

"d_flockproto"
From d_flockproto.U:

This variable conditionally defines the "HAS_FLOCK_PROTO" symbol, which indicates to the C
program that the system provides a prototype for the flock() function. Otherwise, it is up to
the program to supply one.

"d_fork"
From d_fork.U:

This variable conditionally defines the "HAS_FORK" symbol, which indicates to the C program that
the fork() routine is available.

"d_fp_class"
From d_fp_class.U:

This variable conditionally defines the "HAS_FP_CLASS" symbol, which indicates to the C program
that the fp_class() routine is available.

"d_fpathconf"
From d_pathconf.U:

This variable conditionally defines the "HAS_FPATHCONF" symbol, which indicates to the C program
that the pathconf() routine is available to determine file-system related limits and options
associated with a given open file descriptor.

"d_fpclass"
From d_fpclass.U:

This variable conditionally defines the "HAS_FPCLASS" symbol, which indicates to the C program
that the fpclass() routine is available.

"d_fpclassify"
From d_fpclassify.U:

This variable conditionally defines the "HAS_FPCLASSIFY" symbol, which indicates to the C program
that the fpclassify() routine is available.

"d_fpclassl"
From d_fpclassl.U:

This variable conditionally defines the "HAS_FPCLASSL" symbol, which indicates to the C program
that the fpclassl() routine is available.

"d_fpos64_t"
From d_fpos64_t.U:

This symbol will be defined if the C compiler supports fpos64_t.

"d_frexpl"
From d_frexpl.U:

This variable conditionally defines the "HAS_FREXPL" symbol, which indicates to the C program
that the frexpl() routine is available.

"d_fs_data_s"
From d_fs_data_s.U:

This variable conditionally defines the "HAS_STRUCT_FS_DATA" symbol, which indicates that the
struct fs_data is supported.

"d_fseeko"
From d_fseeko.U:

This variable conditionally defines the "HAS_FSEEKO" symbol, which indicates to the C program
that the fseeko() routine is available.

"d_fsetpos"
From d_fsetpos.U:

This variable conditionally defines "HAS_FSETPOS" if fsetpos() is available to set the file
position indicator.

"d_fstatfs"
From d_fstatfs.U:

This variable conditionally defines the "HAS_FSTATFS" symbol, which indicates to the C program
that the fstatfs() routine is available.

"d_fstatvfs"
From d_statvfs.U:

This variable conditionally defines the "HAS_FSTATVFS" symbol, which indicates to the C program
that the fstatvfs() routine is available.

"d_fsync"
From d_fsync.U:

This variable conditionally defines the "HAS_FSYNC" symbol, which indicates to the C program that
the fsync() routine is available.

"d_ftello"
From d_ftello.U:

This variable conditionally defines the "HAS_FTELLO" symbol, which indicates to the C program
that the ftello() routine is available.

"d_ftime"
From d_ftime.U:

This variable conditionally defines the "HAS_FTIME" symbol, which indicates that the ftime()
routine exists. The ftime() routine is basically a sub-second accuracy clock.

"d_futimes"
From d_futimes.U:

This variable conditionally defines the "HAS_FUTIMES" symbol, which indicates to the C program
that the futimes() routine is available.

"d_Gconvert"
From d_gconvert.U:

This variable holds what Gconvert is defined as to convert floating point numbers into strings.
By default, Configure sets "this" macro to use the first of gconvert, gcvt, or sprintf that pass
sprintf-%g-like behaviour tests. If perl is using long doubles, the macro uses the first of the
following functions that pass Configure's tests: qgcvt, sprintf (if Configure knows how to make
sprintf format long doubles--see sPRIgldbl), gconvert, gcvt, and sprintf (casting to double).
The gconvert_preference and gconvert_ld_preference variables can be used to alter Configure's
preferences, for doubles and long doubles, respectively. If present, they contain a space-separated spaceseparated
separated list of one or more of the above function names in the order they should be tried.

d_Gconvert may be set to override Configure with a platform- specific function. If this function
expects a double, a different value may need to be set by the uselongdouble.cbu call-back unit so
that long doubles can be formatted without loss of precision.

"d_gdbm_ndbm_h_uses_prototypes"
From i_ndbm.U:

This variable conditionally defines the "NDBM_H_USES_PROTOTYPES" symbol, which indicates that the
gdbm-ndbm.h include file uses real "ANSI" C prototypes instead of K&R style function
declarations. K&R style declarations are unsupported in C++, so the include file requires special
handling when using a C++ compiler and this variable is undefined. Consult the different
d_*ndbm_h_uses_prototypes variables to get the same information for alternative ndbm.h include
files.

"d_gdbmndbm_h_uses_prototypes"
From i_ndbm.U:

This variable conditionally defines the "NDBM_H_USES_PROTOTYPES" symbol, which indicates that the
gdbm/ndbm.h include file uses real "ANSI" C prototypes instead of K&R style function
declarations. K&R style declarations are unsupported in C++, so the include file requires special
handling when using a C++ compiler and this variable is undefined. Consult the different
d_*ndbm_h_uses_prototypes variables to get the same information for alternative ndbm.h include
files.

"d_getaddrinfo"
From d_getaddrinfo.U:

This variable conditionally defines the "HAS_GETADDRINFO" symbol, which indicates to the C
program that the getaddrinfo() function is available.

"d_getcwd"
From d_getcwd.U:

This variable conditionally defines the "HAS_GETCWD" symbol, which indicates to the C program
that the getcwd() routine is available to get the current working directory.

"d_getespwnam"
From d_getespwnam.U:

This variable conditionally defines "HAS_GETESPWNAM" if getespwnam() is available to retrieve
enhanced (shadow) password entries by name.

"d_getfsstat"
From d_getfsstat.U:

This variable conditionally defines the "HAS_GETFSSTAT" symbol, which indicates to the C program
that the getfsstat() routine is available.

"d_getgrent"
From d_getgrent.U:

This variable conditionally defines the "HAS_GETGRENT" symbol, which indicates to the C program
that the getgrent() routine is available for sequential access of the group database.

"d_getgrent_r"
From d_getgrent_r.U:

This variable conditionally defines the "HAS_GETGRENT_R" symbol, which indicates to the C program
that the getgrent_r() routine is available.

"d_getgrgid_r"
From d_getgrgid_r.U:

This variable conditionally defines the "HAS_GETGRGID_R" symbol, which indicates to the C program
that the getgrgid_r() routine is available.

"d_getgrnam_r"
From d_getgrnam_r.U:

This variable conditionally defines the "HAS_GETGRNAM_R" symbol, which indicates to the C program
that the getgrnam_r() routine is available.

"d_getgrps"
From d_getgrps.U:

This variable conditionally defines the "HAS_GETGROUPS" symbol, which indicates to the C program
that the getgroups() routine is available to get the list of process groups.

"d_gethbyaddr"
From d_gethbyad.U:

This variable conditionally defines the "HAS_GETHOSTBYADDR" symbol, which indicates to the C
program that the gethostbyaddr() routine is available to look up hosts by their "IP" addresses.

"d_gethbyname"
From d_gethbynm.U:

This variable conditionally defines the "HAS_GETHOSTBYNAME" symbol, which indicates to the C
program that the gethostbyname() routine is available to look up host names in some data base or
other.

"d_gethent"
From d_gethent.U:

This variable conditionally defines "HAS_GETHOSTENT" if gethostent() is available to look up host
names in some data base or another.

"d_gethname"
From d_gethname.U:

This variable conditionally defines the "HAS_GETHOSTNAME" symbol, which indicates to the C
program that the gethostname() routine may be used to derive the host name.

"d_gethostbyaddr_r"
From d_gethostbyaddr_r.U:

This variable conditionally defines the "HAS_GETHOSTBYADDR_R" symbol, which indicates to the C
program that the gethostbyaddr_r() routine is available.

"d_gethostbyname_r"
From d_gethostbyname_r.U:

This variable conditionally defines the "HAS_GETHOSTBYNAME_R" symbol, which indicates to the C
program that the gethostbyname_r() routine is available.

"d_gethostent_r"
From d_gethostent_r.U:

This variable conditionally defines the "HAS_GETHOSTENT_R" symbol, which indicates to the C
program that the gethostent_r() routine is available.

"d_gethostprotos"
From d_gethostprotos.U:

This variable conditionally defines the "HAS_GETHOST_PROTOS" symbol, which indicates to the C
program that <netdb.h> supplies prototypes for the various gethost*() functions. See also
netdbtype.U for probing for various netdb types.

"d_getitimer"
From d_getitimer.U:

This variable conditionally defines the "HAS_GETITIMER" symbol, which indicates to the C program
that the getitimer() routine is available.

"d_getlogin"
From d_getlogin.U:

This variable conditionally defines the "HAS_GETLOGIN" symbol, which indicates to the C program
that the getlogin() routine is available to get the login name.

"d_getlogin_r"
From d_getlogin_r.U:

This variable conditionally defines the "HAS_GETLOGIN_R" symbol, which indicates to the C program
that the getlogin_r() routine is available.

"d_getmnt"
From d_getmnt.U:

This variable conditionally defines the "HAS_GETMNT" symbol, which indicates to the C program
that the getmnt() routine is available to retrieve one or more mount info blocks by filename.

"d_getmntent"
From d_getmntent.U:

This variable conditionally defines the "HAS_GETMNTENT" symbol, which indicates to the C program
that the getmntent() routine is available to iterate through mounted files to get their mount
info.

"d_getnameinfo"
From d_getnameinfo.U:

This variable conditionally defines the "HAS_GETNAMEINFO" symbol, which indicates to the C
program that the getnameinfo() function is available.

"d_getnbyaddr"
From d_getnbyad.U:

This variable conditionally defines the "HAS_GETNETBYADDR" symbol, which indicates to the C
program that the getnetbyaddr() routine is available to look up networks by their "IP" addresses.

"d_getnbyname"
From d_getnbynm.U:

This variable conditionally defines the "HAS_GETNETBYNAME" symbol, which indicates to the C
program that the getnetbyname() routine is available to look up networks by their names.

"d_getnent"
From d_getnent.U:

This variable conditionally defines "HAS_GETNETENT" if getnetent() is available to look up
network names in some data base or another.

"d_getnetbyaddr_r"
From d_getnetbyaddr_r.U:

This variable conditionally defines the "HAS_GETNETBYADDR_R" symbol, which indicates to the C
program that the getnetbyaddr_r() routine is available.

"d_getnetbyname_r"
From d_getnetbyname_r.U:

This variable conditionally defines the "HAS_GETNETBYNAME_R" symbol, which indicates to the C
program that the getnetbyname_r() routine is available.

"d_getnetent_r"
From d_getnetent_r.U:

This variable conditionally defines the "HAS_GETNETENT_R" symbol, which indicates to the C
program that the getnetent_r() routine is available.

"d_getnetprotos"
From d_getnetprotos.U:

This variable conditionally defines the "HAS_GETNET_PROTOS" symbol, which indicates to the C
program that <netdb.h> supplies prototypes for the various getnet*() functions. See also
netdbtype.U for probing for various netdb types.

"d_getpagsz"
From d_getpagsz.U:

This variable conditionally defines "HAS_GETPAGESIZE" if getpagesize() is available to get the
system page size.

"d_getpbyname"
From d_getprotby.U:

This variable conditionally defines the "HAS_GETPROTOBYNAME" symbol, which indicates to the C
program that the getprotobyname() routine is available to look up protocols by their name.

"d_getpbynumber"
From d_getprotby.U:

This variable conditionally defines the "HAS_GETPROTOBYNUMBER" symbol, which indicates to the C
program that the getprotobynumber() routine is available to look up protocols by their number.

"d_getpent"
From d_getpent.U:

This variable conditionally defines "HAS_GETPROTOENT" if getprotoent() is available to look up
protocols in some data base or another.

"d_getpgid"
From d_getpgid.U:

This variable conditionally defines the "HAS_GETPGID" symbol, which indicates to the C program
that the getpgid(pid) function is available to get the process group id.

"d_getpgrp"
From d_getpgrp.U:

This variable conditionally defines "HAS_GETPGRP" if getpgrp() is available to get the current
process group.

"d_getpgrp2"
From d_getpgrp2.U:

This variable conditionally defines the HAS_GETPGRP2 symbol, which indicates to the C program
that the getpgrp2() (as in DG/"UX") routine is available to get the current process group.

"d_getppid"
From d_getppid.U:

This variable conditionally defines the "HAS_GETPPID" symbol, which indicates to the C program
that the getppid() routine is available to get the parent process "ID".

"d_getprior"
From d_getprior.U:

This variable conditionally defines "HAS_GETPRIORITY" if getpriority() is available to get a
process's priority.

"d_getprotobyname_r"
From d_getprotobyname_r.U:

This variable conditionally defines the "HAS_GETPROTOBYNAME_R" symbol, which indicates to the C
program that the getprotobyname_r() routine is available.

"d_getprotobynumber_r"
From d_getprotobynumber_r.U:

This variable conditionally defines the "HAS_GETPROTOBYNUMBER_R" symbol, which indicates to the C
program that the getprotobynumber_r() routine is available.

"d_getprotoent_r"
From d_getprotoent_r.U:

This variable conditionally defines the "HAS_GETPROTOENT_R" symbol, which indicates to the C
program that the getprotoent_r() routine is available.

"d_getprotoprotos"
From d_getprotoprotos.U:

This variable conditionally defines the "HAS_GETPROTO_PROTOS" symbol, which indicates to the C
program that <netdb.h> supplies prototypes for the various getproto*() functions. See also
netdbtype.U for probing for various netdb types.

"d_getprpwnam"
From d_getprpwnam.U:

This variable conditionally defines "HAS_GETPRPWNAM" if getprpwnam() is available to retrieve
protected (shadow) password entries by name.

"d_getpwent"
From d_getpwent.U:

This variable conditionally defines the "HAS_GETPWENT" symbol, which indicates to the C program
that the getpwent() routine is available for sequential access of the passwd database.

"d_getpwent_r"
From d_getpwent_r.U:

This variable conditionally defines the "HAS_GETPWENT_R" symbol, which indicates to the C program
that the getpwent_r() routine is available.

"d_getpwnam_r"
From d_getpwnam_r.U:

This variable conditionally defines the "HAS_GETPWNAM_R" symbol, which indicates to the C program
that the getpwnam_r() routine is available.

"d_getpwuid_r"
From d_getpwuid_r.U:

This variable conditionally defines the "HAS_GETPWUID_R" symbol, which indicates to the C program
that the getpwuid_r() routine is available.

"d_getsbyname"
From d_getsrvby.U:

This variable conditionally defines the "HAS_GETSERVBYNAME" symbol, which indicates to the C
program that the getservbyname() routine is available to look up services by their name.

"d_getsbyport"
From d_getsrvby.U:

This variable conditionally defines the "HAS_GETSERVBYPORT" symbol, which indicates to the C
program that the getservbyport() routine is available to look up services by their port.

"d_getsent"
From d_getsent.U:

This variable conditionally defines "HAS_GETSERVENT" if getservent() is available to look up
network services in some data base or another.

"d_getservbyname_r"
From d_getservbyname_r.U:

This variable conditionally defines the "HAS_GETSERVBYNAME_R" symbol, which indicates to the C
program that the getservbyname_r() routine is available.

"d_getservbyport_r"
From d_getservbyport_r.U:

This variable conditionally defines the "HAS_GETSERVBYPORT_R" symbol, which indicates to the C
program that the getservbyport_r() routine is available.

"d_getservent_r"
From d_getservent_r.U:

This variable conditionally defines the "HAS_GETSERVENT_R" symbol, which indicates to the C
program that the getservent_r() routine is available.

"d_getservprotos"
From d_getservprotos.U:

This variable conditionally defines the "HAS_GETSERV_PROTOS" symbol, which indicates to the C
program that <netdb.h> supplies prototypes for the various getserv*() functions. See also
netdbtype.U for probing for various netdb types.

"d_getspnam"
From d_getspnam.U:

This variable conditionally defines "HAS_GETSPNAM" if getspnam() is available to retrieve SysV
shadow password entries by name.

"d_getspnam_r"
From d_getspnam_r.U:

This variable conditionally defines the "HAS_GETSPNAM_R" symbol, which indicates to the C program
that the getspnam_r() routine is available.

"d_gettimeod"
From d_ftime.U:

This variable conditionally defines the "HAS_GETTIMEOFDAY" symbol, which indicates that the
gettimeofday() system call exists (to obtain a sub-second accuracy clock). You should probably
include <sys/resource.h>.

"d_gmtime64"
From d_timefuncs64.U:

This variable conditionally defines the HAS_GMTIME64 symbol, which indicates to the C program
that the gmtime64 () routine is available.

"d_gmtime_r"
From d_gmtime_r.U:

This variable conditionally defines the "HAS_GMTIME_R" symbol, which indicates to the C program
that the gmtime_r() routine is available.

"d_gnulibc"
From d_gnulibc.U:

Defined if we're dealing with the "GNU" C Library.

"d_grpasswd"
From i_grp.U:

This variable conditionally defines "GRPASSWD", which indicates that struct group in <grp.h>
contains gr_passwd.

"d_hasmntopt"
From d_hasmntopt.U:

This variable conditionally defines the "HAS_HASMNTOPT" symbol, which indicates to the C program
that the hasmntopt() routine is available to query the mount options of file systems.

"d_htonl"
From d_htonl.U:

This variable conditionally defines "HAS_HTONL" if htonl() and its friends are available to do
network order byte swapping.

"d_ilogbl"
From d_ilogbl.U:

This variable conditionally defines the "HAS_ILOGBL" symbol, which indicates to the C program
that the ilogbl() routine is available. If scalbnl is also present we can emulate frexpl.

"d_inc_version_list"
From inc_version_list.U:

This variable conditionally defines "PERL_INC_VERSION_LIST". It is set to undef when
"PERL_INC_VERSION_LIST" is empty.

"d_index"
From d_strchr.U:

This variable conditionally defines "HAS_INDEX" if index() and rindex() are available for string
searching.

"d_inetaton"
From d_inetaton.U:

This variable conditionally defines the "HAS_INET_ATON" symbol, which indicates to the C program
that the inet_aton() function is available to parse "IP" address "dotted-quad" strings.

"d_inetntop"
From d_inetntop.U:

This variable conditionally defines the "HAS_INETNTOP" symbol, which indicates to the C program
that the inet_ntop() function is available.

"d_inetpton"
From d_inetpton.U:

This variable conditionally defines the "HAS_INETPTON" symbol, which indicates to the C program
that the inet_pton() function is available.

"d_int64_t"
From d_int64_t.U:

This symbol will be defined if the C compiler supports int64_t.

"d_ipv6_mreq"
From d_socket.U:

This variable conditionally defines the HAS_IPV6_MREQ symbol, which indicates the availability of
a struct ipv6_mreq.

"d_isascii"
From d_isascii.U:

This variable conditionally defines the "HAS_ISASCII" constant, which indicates to the C program
that isascii() is available.

"d_isblank"
From d_isblank.U:

This variable conditionally defines the "HAS_ISBLANK" constant, which indicates to the C program
that isblank() is available.

"d_isfinite"
From d_isfinite.U:

This variable conditionally defines the "HAS_ISFINITE" symbol, which indicates to the C program
that the isfinite() routine is available.

"d_isinf"
From d_isinf.U:

This variable conditionally defines the "HAS_ISINF" symbol, which indicates to the C program that
the isinf() routine is available.

"d_isnan"
From d_isnan.U:

This variable conditionally defines the "HAS_ISNAN" symbol, which indicates to the C program that
the isnan() routine is available.

"d_isnanl"
From d_isnanl.U:

This variable conditionally defines the "HAS_ISNANL" symbol, which indicates to the C program
that the isnanl() routine is available.

"d_killpg"
From d_killpg.U:

This variable conditionally defines the "HAS_KILLPG" symbol, which indicates to the C program
that the killpg() routine is available to kill process groups.

"d_lchown"
From d_lchown.U:

This variable conditionally defines the "HAS_LCHOWN" symbol, which indicates to the C program
that the lchown() routine is available to operate on a symbolic link (instead of following the
link).

"d_ldbl_dig"
From d_ldbl_dig.U:

This variable conditionally defines d_ldbl_dig if this system's header files provide "LDBL_DIG",
which is the number of significant digits in a long double precision number.

"d_libm_lib_version"
From d_libm_lib_version.U:

This variable conditionally defines the "LIBM_LIB_VERSION" symbol, which indicates to the C
program that math.h defines "_LIB_VERSION" being available in libm

"d_link"
From d_link.U:

This variable conditionally defines "HAS_LINK" if link() is available to create hard links.

"d_localtime64"
From d_timefuncs64.U:

This variable conditionally defines the HAS_LOCALTIME64 symbol, which indicates to the C program
that the localtime64 () routine is available.

"d_localtime_r"
From d_localtime_r.U:

This variable conditionally defines the "HAS_LOCALTIME_R" symbol, which indicates to the C
program that the localtime_r() routine is available.

"d_localtime_r_needs_tzset"
From d_localtime_r.U:

This variable conditionally defines the "LOCALTIME_R_NEEDS_TZSET" symbol, which makes us call
tzset before localtime_r()

"d_locconv"
From d_locconv.U:

This variable conditionally defines "HAS_LOCALECONV" if localeconv() is available for numeric and
monetary formatting conventions.

"d_lockf"
From d_lockf.U:

This variable conditionally defines "HAS_LOCKF" if lockf() is available to do file locking.

"d_longdbl"
From d_longdbl.U:

This variable conditionally defines "HAS_LONG_DOUBLE" if the long double type is supported.

"d_longlong"
From d_longlong.U:

This variable conditionally defines "HAS_LONG_LONG" if the long long type is supported.

"d_lseekproto"
From d_lseekproto.U:

This variable conditionally defines the "HAS_LSEEK_PROTO" symbol, which indicates to the C
program that the system provides a prototype for the lseek() function. Otherwise, it is up to
the program to supply one.

"d_lstat"
From d_lstat.U:

This variable conditionally defines "HAS_LSTAT" if lstat() is available to do file stats on
symbolic links.

"d_madvise"
From d_madvise.U:

This variable conditionally defines "HAS_MADVISE" if madvise() is available to map a file into
memory.

"d_malloc_good_size"
From d_malloc_size.U:

This symbol, if defined, indicates that the malloc_good_size routine is available for use.

"d_malloc_size"
From d_malloc_size.U:

This symbol, if defined, indicates that the malloc_size routine is available for use.

"d_mblen"
From d_mblen.U:

This variable conditionally defines the "HAS_MBLEN" symbol, which indicates to the C program that
the mblen() routine is available to find the number of bytes in a multibye character.

"d_mbstowcs"
From d_mbstowcs.U:

This variable conditionally defines the "HAS_MBSTOWCS" symbol, which indicates to the C program
that the mbstowcs() routine is available to convert a multibyte string into a wide character
string.

"d_mbtowc"
From d_mbtowc.U:

This variable conditionally defines the "HAS_MBTOWC" symbol, which indicates to the C program
that the mbtowc() routine is available to convert multibyte to a wide character.

"d_memchr"
From d_memchr.U:

This variable conditionally defines the "HAS_MEMCHR" symbol, which indicates to the C program
that the memchr() routine is available to locate characters within a C string.

"d_memcmp"
From d_memcmp.U:

This variable conditionally defines the "HAS_MEMCMP" symbol, which indicates to the C program
that the memcmp() routine is available to compare blocks of memory.

"d_memcpy"
From d_memcpy.U:

This variable conditionally defines the "HAS_MEMCPY" symbol, which indicates to the C program
that the memcpy() routine is available to copy blocks of memory.

"d_memmove"
From d_memmove.U:

This variable conditionally defines the "HAS_MEMMOVE" symbol, which indicates to the C program
that the memmove() routine is available to copy potentially overlapping blocks of memory.

"d_memset"
From d_memset.U:

This variable conditionally defines the "HAS_MEMSET" symbol, which indicates to the C program
that the memset() routine is available to set blocks of memory.

"d_mkdir"
From d_mkdir.U:

This variable conditionally defines the "HAS_MKDIR" symbol, which indicates to the C program that
the mkdir() routine is available to create directories..

"d_mkdtemp"
From d_mkdtemp.U:

This variable conditionally defines the "HAS_MKDTEMP" symbol, which indicates to the C program
that the mkdtemp() routine is available to exclusively create a uniquely named temporary
directory.

"d_mkfifo"
From d_mkfifo.U:

This variable conditionally defines the "HAS_MKFIFO" symbol, which indicates to the C program
that the mkfifo() routine is available.

"d_mkstemp"
From d_mkstemp.U:

This variable conditionally defines the "HAS_MKSTEMP" symbol, which indicates to the C program
that the mkstemp() routine is available to exclusively create and open a uniquely named temporary
file.

"d_mkstemps"
From d_mkstemps.U:

This variable conditionally defines the "HAS_MKSTEMPS" symbol, which indicates to the C program
that the mkstemps() routine is available to exclusively create and open a uniquely named (with a
suffix) temporary file.

"d_mktime"
From d_mktime.U:

This variable conditionally defines the "HAS_MKTIME" symbol, which indicates to the C program
that the mktime() routine is available.

"d_mktime64"
From d_timefuncs64.U:

This variable conditionally defines the HAS_MKTIME64 symbol, which indicates to the C program
that the mktime64 () routine is available.

"d_mmap"
From d_mmap.U:

This variable conditionally defines "HAS_MMAP" if mmap() is available to map a file into memory.

"d_modfl"
From d_modfl.U:

This variable conditionally defines the "HAS_MODFL" symbol, which indicates to the C program that
the modfl() routine is available.

"d_modfl_pow32_bug"
From d_modfl.U:

This variable conditionally defines the HAS_MODFL_POW32_BUG symbol, which indicates that modfl()
is broken for long doubles >= pow(2, 32). For example from 4294967303.150000 one would get
4294967302.000000 and 1.150000. The bug has been seen in certain versions of glibc, release
2.2.2 is known to be okay.

"d_modflproto"
From d_modfl.U:

This symbol, if defined, indicates that the system provides a prototype for the modfl() function.
Otherwise, it is up to the program to supply one. C99 says it should be long double modfl(long
double, long double *);

"d_mprotect"
From d_mprotect.U:

This variable conditionally defines "HAS_MPROTECT" if mprotect() is available to modify the
access protection of a memory mapped file.

"d_msg"
From d_msg.U:

This variable conditionally defines the "HAS_MSG" symbol, which indicates that the entire msg*(2)
library is present.

"d_msg_ctrunc"
From d_socket.U:

This variable conditionally defines the "HAS_MSG_CTRUNC" symbol, which indicates that the
"MSG_CTRUNC" is available. #ifdef is not enough because it may be an enum, glibc has been known
to do this.

"d_msg_dontroute"
From d_socket.U:

This variable conditionally defines the "HAS_MSG_DONTROUTE" symbol, which indicates that the
"MSG_DONTROUTE" is available. #ifdef is not enough because it may be an enum, glibc has been
known to do this.

"d_msg_oob"
From d_socket.U:

This variable conditionally defines the "HAS_MSG_OOB" symbol, which indicates that the "MSG_OOB"
is available. #ifdef is not enough because it may be an enum, glibc has been known to do this.

"d_msg_peek"
From d_socket.U:

This variable conditionally defines the "HAS_MSG_PEEK" symbol, which indicates that the
"MSG_PEEK" is available. #ifdef is not enough because it may be an enum, glibc has been known to
do this.

"d_msg_proxy"
From d_socket.U:

This variable conditionally defines the "HAS_MSG_PROXY" symbol, which indicates that the
"MSG_PROXY" is available. #ifdef is not enough because it may be an enum, glibc has been known
to do this.

"d_msgctl"
From d_msgctl.U:

This variable conditionally defines the "HAS_MSGCTL" symbol, which indicates to the C program
that the msgctl() routine is available.

"d_msgget"
From d_msgget.U:

This variable conditionally defines the "HAS_MSGGET" symbol, which indicates to the C program
that the msgget() routine is available.

"d_msghdr_s"
From d_msghdr_s.U:

This variable conditionally defines the "HAS_STRUCT_MSGHDR" symbol, which indicates that the
struct msghdr is supported.

"d_msgrcv"
From d_msgrcv.U:

This variable conditionally defines the "HAS_MSGRCV" symbol, which indicates to the C program
that the msgrcv() routine is available.

"d_msgsnd"
From d_msgsnd.U:

This variable conditionally defines the "HAS_MSGSND" symbol, which indicates to the C program
that the msgsnd() routine is available.

"d_msync"
From d_msync.U:

This variable conditionally defines "HAS_MSYNC" if msync() is available to synchronize a mapped
file.

"d_munmap"
From d_munmap.U:

This variable conditionally defines "HAS_MUNMAP" if munmap() is available to unmap a region
mapped by mmap().

"d_mymalloc"
From mallocsrc.U:

This variable conditionally defines "MYMALLOC" in case other parts of the source want to take
special action if "MYMALLOC" is used. This may include different sorts of profiling or error
detection.

"d_ndbm"
From i_ndbm.U:

This variable conditionally defines the "HAS_NDBM" symbol, which indicates that both the ndbm.h
include file and an appropriate ndbm library exist. Consult the different i_*ndbm variables to
find out the actual include location. Sometimes, a system has the header file but not the
library. This variable will only be set if the system has both.

"d_ndbm_h_uses_prototypes"
From i_ndbm.U:

This variable conditionally defines the "NDBM_H_USES_PROTOTYPES" symbol, which indicates that the
ndbm.h include file uses real "ANSI" C prototypes instead of K&R style function declarations. K&R
style declarations are unsupported in C++, so the include file requires special handling when
using a C++ compiler and this variable is undefined. Consult the different
d_*ndbm_h_uses_prototypes variables to get the same information for alternative ndbm.h include
files.

"d_nice"
From d_nice.U:

This variable conditionally defines the "HAS_NICE" symbol, which indicates to the C program that
the nice() routine is available.

"d_nl_langinfo"
From d_nl_langinfo.U:

This variable conditionally defines the "HAS_NL_LANGINFO" symbol, which indicates to the C
program that the nl_langinfo() routine is available.

"d_nv_preserves_uv"
From perlxv.U:

This variable indicates whether a variable of type nvtype can preserve all the bits a variable of
type uvtype.

"d_nv_zero_is_allbits_zero"
From perlxv.U:

This variable indicates whether a variable of type nvtype stores 0.0 in memory as all bits zero.

"d_off64_t"
From d_off64_t.U:

This symbol will be defined if the C compiler supports off64_t.

"d_old_pthread_create_joinable"
From d_pthrattrj.U:

This variable conditionally defines pthread_create_joinable. undef if pthread.h defines
"PTHREAD_CREATE_JOINABLE".

"d_oldpthreads"
From usethreads.U:

This variable conditionally defines the "OLD_PTHREADS_API" symbol, and indicates that Perl should
be built to use the old draft "POSIX" threads "API". This is only potentially meaningful if
usethreads is set.

"d_oldsock"
From d_socket.U:

This variable conditionally defines the "OLDSOCKET" symbol, which indicates that the "BSD" socket
interface is based on 4.1c and not 4.2.

"d_open3"
From d_open3.U:

This variable conditionally defines the HAS_OPEN3 manifest constant, which indicates to the C
program that the 3 argument version of the open(2) function is available.

"d_pathconf"
From d_pathconf.U:

This variable conditionally defines the "HAS_PATHCONF" symbol, which indicates to the C program
that the pathconf() routine is available to determine file-system related limits and options
associated with a given filename.

"d_pause"
From d_pause.U:

This variable conditionally defines the "HAS_PAUSE" symbol, which indicates to the C program that
the pause() routine is available to suspend a process until a signal is received.

"d_perl_otherlibdirs"
From otherlibdirs.U:

This variable conditionally defines "PERL_OTHERLIBDIRS", which contains a colon-separated set of
paths for the perl binary to include in @"INC". See also otherlibdirs.

"d_phostname"
From d_gethname.U:

This variable conditionally defines the "HAS_PHOSTNAME" symbol, which contains the shell command
which, when fed to popen(), may be used to derive the host name.

"d_pipe"
From d_pipe.U:

This variable conditionally defines the "HAS_PIPE" symbol, which indicates to the C program that
the pipe() routine is available to create an inter-process channel.

"d_poll"
From d_poll.U:

This variable conditionally defines the "HAS_POLL" symbol, which indicates to the C program that
the poll() routine is available to poll active file descriptors.

"d_portable"
From d_portable.U:

This variable conditionally defines the "PORTABLE" symbol, which indicates to the C program that
it should not assume that it is running on the machine it was compiled on.

"d_prctl"
From d_prctl.U:

This variable conditionally defines the "HAS_PRCTL" symbol, which indicates to the C program that
the prctl() routine is available.

"d_prctl_set_name"
From d_prctl.U:

This variable conditionally defines the "HAS_PRCTL_SET_NAME" symbol, which indicates to the C
program that the prctl() routine supports the "PR_SET_NAME" option.

"d_PRId64"
From quadfio.U:

This variable conditionally defines the PERL_PRId64 symbol, which indicates that stdio has a
symbol to print 64-bit decimal numbers.

"d_PRIeldbl"
From longdblfio.U:

This variable conditionally defines the PERL_PRIfldbl symbol, which indicates that stdio has a
symbol to print long doubles.

"d_PRIEUldbl"
From longdblfio.U:

This variable conditionally defines the PERL_PRIfldbl symbol, which indicates that stdio has a
symbol to print long doubles. The "U" in the name is to separate this from d_PRIeldbl so that
even case-blind systems can see the difference.

"d_PRIfldbl"
From longdblfio.U:

This variable conditionally defines the PERL_PRIfldbl symbol, which indicates that stdio has a
symbol to print long doubles.

"d_PRIFUldbl"
From longdblfio.U:

This variable conditionally defines the PERL_PRIfldbl symbol, which indicates that stdio has a
symbol to print long doubles. The "U" in the name is to separate this from d_PRIfldbl so that
even case-blind systems can see the difference.

"d_PRIgldbl"
From longdblfio.U:

This variable conditionally defines the PERL_PRIfldbl symbol, which indicates that stdio has a
symbol to print long doubles.

"d_PRIGUldbl"
From longdblfio.U:

This variable conditionally defines the PERL_PRIfldbl symbol, which indicates that stdio has a
symbol to print long doubles. The "U" in the name is to separate this from d_PRIgldbl so that
even case-blind systems can see the difference.

"d_PRIi64"
From quadfio.U:

This variable conditionally defines the PERL_PRIi64 symbol, which indicates that stdio has a
symbol to print 64-bit decimal numbers.

"d_printf_format_null"
From d_attribut.U:

This variable conditionally defines "PRINTF_FORMAT_NULL_OK", which indicates the C compiler
allows printf-like formats to be null.

"d_PRIo64"
From quadfio.U:

This variable conditionally defines the PERL_PRIo64 symbol, which indicates that stdio has a
symbol to print 64-bit octal numbers.

"d_PRIu64"
From quadfio.U:

This variable conditionally defines the PERL_PRIu64 symbol, which indicates that stdio has a
symbol to print 64-bit unsigned decimal numbers.

"d_PRIx64"
From quadfio.U:

This variable conditionally defines the PERL_PRIx64 symbol, which indicates that stdio has a
symbol to print 64-bit hexadecimal numbers.

"d_PRIXU64"
From quadfio.U:

This variable conditionally defines the PERL_PRIXU64 symbol, which indicates that stdio has a
symbol to print 64-bit hExADECimAl numbers. The "U" in the name is to separate this from
d_PRIx64 so that even case-blind systems can see the difference.

"d_procselfexe"
From d_procselfexe.U:

Defined if $procselfexe is symlink to the absolute pathname of the executing program.

"d_pseudofork"
From d_vfork.U:

This variable conditionally defines the "HAS_PSEUDOFORK" symbol, which indicates that an
emulation of the fork routine is available.

"d_pthread_atfork"
From d_pthread_atfork.U:

This variable conditionally defines the "HAS_PTHREAD_ATFORK" symbol, which indicates to the C
program that the pthread_atfork() routine is available.

"d_pthread_attr_setscope"
From d_pthread_attr_ss.U:

This variable conditionally defines "HAS_PTHREAD_ATTR_SETSCOPE" if pthread_attr_setscope() is
available to set the contention scope attribute of a thread attribute object.

"d_pthread_yield"
From d_pthread_y.U:

This variable conditionally defines the "HAS_PTHREAD_YIELD" symbol if the pthread_yield routine
is available to yield the execution of the current thread.

"d_pwage"
From i_pwd.U:

This variable conditionally defines "PWAGE", which indicates that struct passwd contains pw_age.

"d_pwchange"
From i_pwd.U:

This variable conditionally defines "PWCHANGE", which indicates that struct passwd contains
pw_change.

"d_pwclass"
From i_pwd.U:

This variable conditionally defines "PWCLASS", which indicates that struct passwd contains
pw_class.

"d_pwcomment"
From i_pwd.U:

This variable conditionally defines "PWCOMMENT", which indicates that struct passwd contains
pw_comment.

"d_pwexpire"
From i_pwd.U:

This variable conditionally defines "PWEXPIRE", which indicates that struct passwd contains
pw_expire.

"d_pwgecos"
From i_pwd.U:

This variable conditionally defines "PWGECOS", which indicates that struct passwd contains
pw_gecos.

"d_pwpasswd"
From i_pwd.U:

This variable conditionally defines "PWPASSWD", which indicates that struct passwd contains
pw_passwd.

"d_pwquota"
From i_pwd.U:

This variable conditionally defines "PWQUOTA", which indicates that struct passwd contains
pw_quota.

"d_qgcvt"
From d_qgcvt.U:

This variable conditionally defines the "HAS_QGCVT" symbol, which indicates to the C program that
the qgcvt() routine is available.

"d_quad"
From quadtype.U:

This variable, if defined, tells that there's a 64-bit integer type, quadtype.

"d_random_r"
From d_random_r.U:

This variable conditionally defines the "HAS_RANDOM_R" symbol, which indicates to the C program
that the random_r() routine is available.

"d_readdir"
From d_readdir.U:

This variable conditionally defines "HAS_READDIR" if readdir() is available to read directory
entries.

"d_readdir64_r"
From d_readdir64_r.U:

This variable conditionally defines the HAS_READDIR64_R symbol, which indicates to the C program
that the readdir64_r() routine is available.

"d_readdir_r"
From d_readdir_r.U:

This variable conditionally defines the "HAS_READDIR_R" symbol, which indicates to the C program
that the readdir_r() routine is available.

"d_readlink"
From d_readlink.U:

This variable conditionally defines the "HAS_READLINK" symbol, which indicates to the C program
that the readlink() routine is available to read the value of a symbolic link.

"d_readv"
From d_readv.U:

This variable conditionally defines the "HAS_READV" symbol, which indicates to the C program that
the readv() routine is available.

"d_recvmsg"
From d_recvmsg.U:

This variable conditionally defines the "HAS_RECVMSG" symbol, which indicates to the C program
that the recvmsg() routine is available.

"d_rename"
From d_rename.U:

This variable conditionally defines the "HAS_RENAME" symbol, which indicates to the C program
that the rename() routine is available to rename files.

"d_rewinddir"
From d_readdir.U:

This variable conditionally defines "HAS_REWINDDIR" if rewinddir() is available.

"d_rmdir"
From d_rmdir.U:

This variable conditionally defines "HAS_RMDIR" if rmdir() is available to remove directories.

"d_safebcpy"
From d_safebcpy.U:

This variable conditionally defines the "HAS_SAFE_BCOPY" symbol if the bcopy() routine can do
overlapping copies. Normally, you should probably use memmove().

"d_safemcpy"
From d_safemcpy.U:

This variable conditionally defines the "HAS_SAFE_MEMCPY" symbol if the memcpy() routine can do
overlapping copies. For overlapping copies, memmove() should be used, if available.

"d_sanemcmp"
From d_sanemcmp.U:

This variable conditionally defines the "HAS_SANE_MEMCMP" symbol if the memcpy() routine is
available and can be used to compare relative magnitudes of chars with their high bits set.

"d_sbrkproto"
From d_sbrkproto.U:

This variable conditionally defines the "HAS_SBRK_PROTO" symbol, which indicates to the C program
that the system provides a prototype for the sbrk() function. Otherwise, it is up to the program
to supply one.

"d_scalbnl"
From d_scalbnl.U:

This variable conditionally defines the "HAS_SCALBNL" symbol, which indicates to the C program
that the scalbnl() routine is available. If ilogbl is also present we can emulate frexpl.

"d_sched_yield"
From d_pthread_y.U:

This variable conditionally defines the "HAS_SCHED_YIELD" symbol if the sched_yield routine is
available to yield the execution of the current thread.

"d_scm_rights"
From d_socket.U:

This variable conditionally defines the "HAS_SCM_RIGHTS" symbol, which indicates that the
"SCM_RIGHTS" is available. #ifdef is not enough because it may be an enum, glibc has been known
to do this.

"d_SCNfldbl"
From longdblfio.U:

This variable conditionally defines the PERL_PRIfldbl symbol, which indicates that stdio has a
symbol to scan long doubles.

"d_seekdir"
From d_readdir.U:

This variable conditionally defines "HAS_SEEKDIR" if seekdir() is available.

"d_select"
From d_select.U:

This variable conditionally defines "HAS_SELECT" if select() is available to select active file
descriptors. A <sys/time.h> inclusion may be necessary for the timeout field.

"d_sem"
From d_sem.U:

This variable conditionally defines the "HAS_SEM" symbol, which indicates that the entire sem*(2)
library is present.

"d_semctl"
From d_semctl.U:

This variable conditionally defines the "HAS_SEMCTL" symbol, which indicates to the C program
that the semctl() routine is available.

"d_semctl_semid_ds"
From d_union_semun.U:

This variable conditionally defines "USE_SEMCTL_SEMID_DS", which indicates that struct semid_ds *
is to be used for semctl "IPC_STAT".

"d_semctl_semun"
From d_union_semun.U:

This variable conditionally defines "USE_SEMCTL_SEMUN", which indicates that union semun is to be
used for semctl "IPC_STAT".

"d_semget"
From d_semget.U:

This variable conditionally defines the "HAS_SEMGET" symbol, which indicates to the C program
that the semget() routine is available.

"d_semop"
From d_semop.U:

This variable conditionally defines the "HAS_SEMOP" symbol, which indicates to the C program that
the semop() routine is available.

"d_sendmsg"
From d_sendmsg.U:

This variable conditionally defines the "HAS_SENDMSG" symbol, which indicates to the C program
that the sendmsg() routine is available.

"d_setegid"
From d_setegid.U:

This variable conditionally defines the "HAS_SETEGID" symbol, which indicates to the C program
that the setegid() routine is available to change the effective gid of the current program.

"d_seteuid"
From d_seteuid.U:

This variable conditionally defines the "HAS_SETEUID" symbol, which indicates to the C program
that the seteuid() routine is available to change the effective uid of the current program.

"d_setgrent"
From d_setgrent.U:

This variable conditionally defines the "HAS_SETGRENT" symbol, which indicates to the C program
that the setgrent() routine is available for initializing sequential access to the group
database.

"d_setgrent_r"
From d_setgrent_r.U:

This variable conditionally defines the "HAS_SETGRENT_R" symbol, which indicates to the C program
that the setgrent_r() routine is available.

"d_setgrps"
From d_setgrps.U:

This variable conditionally defines the "HAS_SETGROUPS" symbol, which indicates to the C program
that the setgroups() routine is available to set the list of process groups.

"d_sethent"
From d_sethent.U:

This variable conditionally defines "HAS_SETHOSTENT" if sethostent() is available.

"d_sethostent_r"
From d_sethostent_r.U:

This variable conditionally defines the "HAS_SETHOSTENT_R" symbol, which indicates to the C
program that the sethostent_r() routine is available.

"d_setitimer"
From d_setitimer.U:

This variable conditionally defines the "HAS_SETITIMER" symbol, which indicates to the C program
that the setitimer() routine is available.

"d_setlinebuf"
From d_setlnbuf.U:

This variable conditionally defines the "HAS_SETLINEBUF" symbol, which indicates to the C program
that the setlinebuf() routine is available to change stderr or stdout from block-buffered or
unbuffered to a line-buffered mode.

"d_setlocale"
From d_setlocale.U:

This variable conditionally defines "HAS_SETLOCALE" if setlocale() is available to handle locale-specific localespecific
specific ctype implementations.

"d_setlocale_r"
From d_setlocale_r.U:

This variable conditionally defines the "HAS_SETLOCALE_R" symbol, which indicates to the C
program that the setlocale_r() routine is available.

"d_setnent"
From d_setnent.U:

This variable conditionally defines "HAS_SETNETENT" if setnetent() is available.

"d_setnetent_r"
From d_setnetent_r.U:

This variable conditionally defines the "HAS_SETNETENT_R" symbol, which indicates to the C
program that the setnetent_r() routine is available.

"d_setpent"
From d_setpent.U:

This variable conditionally defines "HAS_SETPROTOENT" if setprotoent() is available.

"d_setpgid"
From d_setpgid.U:

This variable conditionally defines the "HAS_SETPGID" symbol if the setpgid(pid, gpid) function
is available to set process group "ID".

"d_setpgrp"
From d_setpgrp.U:

This variable conditionally defines "HAS_SETPGRP" if setpgrp() is available to set the current
process group.

"d_setpgrp2"
From d_setpgrp2.U:

This variable conditionally defines the HAS_SETPGRP2 symbol, which indicates to the C program
that the setpgrp2() (as in DG/"UX") routine is available to set the current process group.

"d_setprior"
From d_setprior.U:

This variable conditionally defines "HAS_SETPRIORITY" if setpriority() is available to set a
process's priority.

"d_setproctitle"
From d_setproctitle.U:

This variable conditionally defines the "HAS_SETPROCTITLE" symbol, which indicates to the C
program that the setproctitle() routine is available.

"d_setprotoent_r"
From d_setprotoent_r.U:

This variable conditionally defines the "HAS_SETPROTOENT_R" symbol, which indicates to the C
program that the setprotoent_r() routine is available.

"d_setpwent"
From d_setpwent.U:

This variable conditionally defines the "HAS_SETPWENT" symbol, which indicates to the C program
that the setpwent() routine is available for initializing sequential access to the passwd
database.

"d_setpwent_r"
From d_setpwent_r.U:

This variable conditionally defines the "HAS_SETPWENT_R" symbol, which indicates to the C program
that the setpwent_r() routine is available.

"d_setregid"
From d_setregid.U:

This variable conditionally defines "HAS_SETREGID" if setregid() is available to change the real
and effective gid of the current process.

"d_setresgid"
From d_setregid.U:

This variable conditionally defines "HAS_SETRESGID" if setresgid() is available to change the
real, effective and saved gid of the current process.

"d_setresuid"
From d_setreuid.U:

This variable conditionally defines "HAS_SETREUID" if setresuid() is available to change the
real, effective and saved uid of the current process.

"d_setreuid"
From d_setreuid.U:

This variable conditionally defines "HAS_SETREUID" if setreuid() is available to change the real
and effective uid of the current process.

"d_setrgid"
From d_setrgid.U:

This variable conditionally defines the "HAS_SETRGID" symbol, which indicates to the C program
that the setrgid() routine is available to change the real gid of the current program.

"d_setruid"
From d_setruid.U:

This variable conditionally defines the "HAS_SETRUID" symbol, which indicates to the C program
that the setruid() routine is available to change the real uid of the current program.

"d_setsent"
From d_setsent.U:

This variable conditionally defines "HAS_SETSERVENT" if setservent() is available.

"d_setservent_r"
From d_setservent_r.U:

This variable conditionally defines the "HAS_SETSERVENT_R" symbol, which indicates to the C
program that the setservent_r() routine is available.

"d_setsid"
From d_setsid.U:

This variable conditionally defines "HAS_SETSID" if setsid() is available to set the process
group "ID".

"d_setvbuf"
From d_setvbuf.U:

This variable conditionally defines the "HAS_SETVBUF" symbol, which indicates to the C program
that the setvbuf() routine is available to change buffering on an open stdio stream.

"d_sfio"
From d_sfio.U:

This variable conditionally defines the "USE_SFIO" symbol, and indicates whether sfio is
available (and should be used).

"d_shm"
From d_shm.U:

This variable conditionally defines the "HAS_SHM" symbol, which indicates that the entire shm*(2)
library is present.

"d_shmat"
From d_shmat.U:

This variable conditionally defines the "HAS_SHMAT" symbol, which indicates to the C program that
the shmat() routine is available.

"d_shmatprototype"
From d_shmat.U:

This variable conditionally defines the "HAS_SHMAT_PROTOTYPE" symbol, which indicates that
sys/shm.h has a prototype for shmat.

"d_shmctl"
From d_shmctl.U:

This variable conditionally defines the "HAS_SHMCTL" symbol, which indicates to the C program
that the shmctl() routine is available.

"d_shmdt"
From d_shmdt.U:

This variable conditionally defines the "HAS_SHMDT" symbol, which indicates to the C program that
the shmdt() routine is available.

"d_shmget"
From d_shmget.U:

This variable conditionally defines the "HAS_SHMGET" symbol, which indicates to the C program
that the shmget() routine is available.

"d_sigaction"
From d_sigaction.U:

This variable conditionally defines the "HAS_SIGACTION" symbol, which indicates that the Vr4
sigaction() routine is available.

"d_signbit"
From d_signbit.U:

This variable conditionally defines the "HAS_SIGNBIT" symbol, which indicates to the C program
that the signbit() routine is available and safe to use with perl's intern "NV" type.

"d_sigprocmask"
From d_sigprocmask.U:

This variable conditionally defines "HAS_SIGPROCMASK" if sigprocmask() is available to examine or
change the signal mask of the calling process.

"d_sigsetjmp"
From d_sigsetjmp.U:

This variable conditionally defines the "HAS_SIGSETJMP" symbol, which indicates that the
sigsetjmp() routine is available to call setjmp() and optionally save the process's signal mask.

"d_sin6_scope_id"
From d_socket.U:

This variable conditionally defines the HAS_SIN6_SCOPE_ID symbol, which indicates that a struct
sockaddr_in6 structure has the sin6_scope_id member.

"d_sitearch"
From sitearch.U:

This variable conditionally defines "SITEARCH" to hold the pathname of architecture-dependent
library files for $package. If $sitearch is the same as $archlib, then this is set to undef.

"d_snprintf"
From d_snprintf.U:

This variable conditionally defines the "HAS_SNPRINTF" symbol, which indicates to the C program
that the snprintf () library function is available.

"d_sockaddr_in6"
From d_socket.U:

This variable conditionally defines the HAS_SOCKADDR_IN6 symbol, which indicates the availability
of a struct sockaddr_in6.

"d_sockaddr_sa_len"
From d_socket.U:

This variable conditionally defines the "HAS_SOCKADDR_SA_LEN" symbol, which indicates that a
struct sockaddr structure has the sa_len member.

"d_sockatmark"
From d_sockatmark.U:

This variable conditionally defines the "HAS_SOCKATMARK" symbol, which indicates to the C program
that the sockatmark() routine is available.

"d_sockatmarkproto"
From d_sockatmarkproto.U:

This variable conditionally defines the "HAS_SOCKATMARK_PROTO" symbol, which indicates to the C
program that the system provides a prototype for the sockatmark() function. Otherwise, it is up
to the program to supply one.

"d_socket"
From d_socket.U:

This variable conditionally defines "HAS_SOCKET", which indicates that the "BSD" socket interface
is supported.

"d_socklen_t"
From d_socklen_t.U:

This symbol will be defined if the C compiler supports socklen_t.

"d_sockpair"
From d_socket.U:

This variable conditionally defines the "HAS_SOCKETPAIR" symbol, which indicates that the "BSD"
socketpair() is supported.

"d_socks5_init"
From d_socks5_init.U:

This variable conditionally defines the HAS_SOCKS5_INIT symbol, which indicates to the C program
that the socks5_init() routine is available.

"d_sprintf_returns_strlen"
From d_sprintf_len.U:

This variable defines whether sprintf returns the length of the string (as per the "ANSI" spec).
Some C libraries retain compatibility with pre-"ANSI" C and return a pointer to the passed in
buffer; for these this variable will be undef.

"d_sqrtl"
From d_sqrtl.U:

This variable conditionally defines the "HAS_SQRTL" symbol, which indicates to the C program that
the sqrtl() routine is available.

"d_srand48_r"
From d_srand48_r.U:

This variable conditionally defines the HAS_SRAND48_R symbol, which indicates to the C program
that the srand48_r() routine is available.

"d_srandom_r"
From d_srandom_r.U:

This variable conditionally defines the "HAS_SRANDOM_R" symbol, which indicates to the C program
that the srandom_r() routine is available.

"d_sresgproto"
From d_sresgproto.U:

This variable conditionally defines the "HAS_SETRESGID_PROTO" symbol, which indicates to the C
program that the system provides a prototype for the setresgid() function. Otherwise, it is up
to the program to supply one.

"d_sresuproto"
From d_sresuproto.U:

This variable conditionally defines the "HAS_SETRESUID_PROTO" symbol, which indicates to the C
program that the system provides a prototype for the setresuid() function. Otherwise, it is up
to the program to supply one.

"d_statblks"
From d_statblks.U:

This variable conditionally defines "USE_STAT_BLOCKS" if this system has a stat structure
declaring st_blksize and st_blocks.

"d_statfs_f_flags"
From d_statfs_f_flags.U:

This variable conditionally defines the "HAS_STRUCT_STATFS_F_FLAGS" symbol, which indicates to
struct statfs from has f_flags member. This kind of struct statfs is coming from sys/mount.h
("BSD"), not from sys/statfs.h ("SYSV").

"d_statfs_s"
From d_statfs_s.U:

This variable conditionally defines the "HAS_STRUCT_STATFS" symbol, which indicates that the
struct statfs is supported.

"d_static_inline"
From d_static_inline.U:

This variable conditionally defines the "HAS_STATIC_INLINE" symbol, which indicates that the C
compiler supports C99-style static inline. That is, the function can't be called from another
translation unit.

"d_statvfs"
From d_statvfs.U:

This variable conditionally defines the "HAS_STATVFS" symbol, which indicates to the C program
that the statvfs() routine is available.

"d_stdio_cnt_lval"
From d_stdstdio.U:

This variable conditionally defines "STDIO_CNT_LVALUE" if the "FILE_cnt" macro can be used as an
lvalue.

"d_stdio_ptr_lval"
From d_stdstdio.U:

This variable conditionally defines "STDIO_PTR_LVALUE" if the "FILE_ptr" macro can be used as an
lvalue.

"d_stdio_ptr_lval_nochange_cnt"
From d_stdstdio.U:

This symbol is defined if using the "FILE_ptr" macro as an lvalue to increase the pointer by n
leaves File_cnt(fp) unchanged.

"d_stdio_ptr_lval_sets_cnt"
From d_stdstdio.U:

This symbol is defined if using the "FILE_ptr" macro as an lvalue to increase the pointer by n
has the side effect of decreasing the value of File_cnt(fp) by n.

"d_stdio_stream_array"
From stdio_streams.U:

This variable tells whether there is an array holding the stdio streams.

"d_stdiobase"
From d_stdstdio.U:

This variable conditionally defines "USE_STDIO_BASE" if this system has a "FILE" structure
declaring a usable _base field (or equivalent) in stdio.h.

"d_stdstdio"
From d_stdstdio.U:

This variable conditionally defines "USE_STDIO_PTR" if this system has a "FILE" structure
declaring usable _ptr and _cnt fields (or equivalent) in stdio.h.

"d_strchr"
From d_strchr.U:

This variable conditionally defines "HAS_STRCHR" if strchr() and strrchr() are available for
string searching.

"d_strcoll"
From d_strcoll.U:

This variable conditionally defines "HAS_STRCOLL" if strcoll() is available to compare strings
using collating information.

"d_strctcpy"
From d_strctcpy.U:

This variable conditionally defines the "USE_STRUCT_COPY" symbol, which indicates to the C
program that this C compiler knows how to copy structures.

"d_strerrm"
From d_strerror.U:

This variable holds what Strerrr is defined as to translate an error code condition into an error
message string. It could be "strerror" or a more "complex" macro emulating strrror with
sys_errlist[], or the "unknown" string when both strerror and sys_errlist are missing.

"d_strerror"
From d_strerror.U:

This variable conditionally defines "HAS_STRERROR" if strerror() is available to translate error
numbers to strings.

"d_strerror_r"
From d_strerror_r.U:

This variable conditionally defines the "HAS_STRERROR_R" symbol, which indicates to the C program
that the strerror_r() routine is available.

"d_strftime"
From d_strftime.U:

This variable conditionally defines the "HAS_STRFTIME" symbol, which indicates to the C program
that the strftime() routine is available.

"d_strlcat"
From d_strlcat.U:

This variable conditionally defines the "HAS_STRLCAT" symbol, which indicates to the C program
that the strlcat () routine is available.

"d_strlcpy"
From d_strlcpy.U:

This variable conditionally defines the "HAS_STRLCPY" symbol, which indicates to the C program
that the strlcpy () routine is available.

"d_strtod"
From d_strtod.U:

This variable conditionally defines the "HAS_STRTOD" symbol, which indicates to the C program
that the strtod() routine is available to provide better numeric string conversion than atof().

"d_strtol"
From d_strtol.U:

This variable conditionally defines the "HAS_STRTOL" symbol, which indicates to the C program
that the strtol() routine is available to provide better numeric string conversion than atoi()
and friends.

"d_strtold"
From d_strtold.U:

This variable conditionally defines the "HAS_STRTOLD" symbol, which indicates to the C program
that the strtold() routine is available.

"d_strtoll"
From d_strtoll.U:

This variable conditionally defines the "HAS_STRTOLL" symbol, which indicates to the C program
that the strtoll() routine is available.

"d_strtoq"
From d_strtoq.U:

This variable conditionally defines the "HAS_STRTOQ" symbol, which indicates to the C program
that the strtoq() routine is available.

"d_strtoul"
From d_strtoul.U:

This variable conditionally defines the "HAS_STRTOUL" symbol, which indicates to the C program
that the strtoul() routine is available to provide conversion of strings to unsigned long.

"d_strtoull"
From d_strtoull.U:

This variable conditionally defines the "HAS_STRTOULL" symbol, which indicates to the C program
that the strtoull() routine is available.

"d_strtouq"
From d_strtouq.U:

This variable conditionally defines the "HAS_STRTOUQ" symbol, which indicates to the C program
that the strtouq() routine is available.

"d_strxfrm"
From d_strxfrm.U:

This variable conditionally defines "HAS_STRXFRM" if strxfrm() is available to transform strings.

"d_suidsafe"
From d_dosuid.U:

This variable conditionally defines "SETUID_SCRIPTS_ARE_SECURE_NOW" if setuid scripts can be
secure. This test looks in /dev/fd/.

"d_symlink"
From d_symlink.U:

This variable conditionally defines the "HAS_SYMLINK" symbol, which indicates to the C program
that the symlink() routine is available to create symbolic links.

"d_syscall"
From d_syscall.U:

This variable conditionally defines "HAS_SYSCALL" if syscall() is available call arbitrary system
calls.

"d_syscallproto"
From d_syscallproto.U:

This variable conditionally defines the "HAS_SYSCALL_PROTO" symbol, which indicates to the C
program that the system provides a prototype for the syscall() function. Otherwise, it is up to
the program to supply one.

"d_sysconf"
From d_sysconf.U:

This variable conditionally defines the "HAS_SYSCONF" symbol, which indicates to the C program
that the sysconf() routine is available to determine system related limits and options.

"d_sysernlst"
From d_strerror.U:

This variable conditionally defines "HAS_SYS_ERRNOLIST" if sys_errnolist[] is available to
translate error numbers to the symbolic name.

"d_syserrlst"
From d_strerror.U:

This variable conditionally defines "HAS_SYS_ERRLIST" if sys_errlist[] is available to translate
error numbers to strings.

"d_system"
From d_system.U:

This variable conditionally defines "HAS_SYSTEM" if system() is available to issue a shell
command.

"d_tcgetpgrp"
From d_tcgtpgrp.U:

This variable conditionally defines the "HAS_TCGETPGRP" symbol, which indicates to the C program
that the tcgetpgrp() routine is available. to get foreground process group "ID".

"d_tcsetpgrp"
From d_tcstpgrp.U:

This variable conditionally defines the "HAS_TCSETPGRP" symbol, which indicates to the C program
that the tcsetpgrp() routine is available to set foreground process group "ID".

"d_telldir"
From d_readdir.U:

This variable conditionally defines "HAS_TELLDIR" if telldir() is available.

"d_telldirproto"
From d_telldirproto.U:

This variable conditionally defines the "HAS_TELLDIR_PROTO" symbol, which indicates to the C
program that the system provides a prototype for the telldir() function. Otherwise, it is up to
the program to supply one.

"d_time"
From d_time.U:

This variable conditionally defines the "HAS_TIME" symbol, which indicates that the time()
routine exists. The time() routine is normally provided on "UNIX" systems.

"d_timegm"
From d_timegm.U:

This variable conditionally defines the "HAS_TIMEGM" symbol, which indicates to the C program
that the timegm () routine is available.

"d_times"
From d_times.U:

This variable conditionally defines the "HAS_TIMES" symbol, which indicates that the times()
routine exists. The times() routine is normally provided on "UNIX" systems. You may have to
include <sys/times.h>.

"d_tm_tm_gmtoff"
From i_time.U:

This variable conditionally defines "HAS_TM_TM_GMTOFF", which indicates indicates to the C
program that the struct tm has the tm_gmtoff field.

"d_tm_tm_zone"
From i_time.U:

This variable conditionally defines "HAS_TM_TM_ZONE", which indicates indicates to the C program
that the struct tm has the tm_zone field.

"d_tmpnam_r"
From d_tmpnam_r.U:

This variable conditionally defines the "HAS_TMPNAM_R" symbol, which indicates to the C program
that the tmpnam_r() routine is available.

"d_truncate"
From d_truncate.U:

This variable conditionally defines "HAS_TRUNCATE" if truncate() is available to truncate files.

"d_ttyname_r"
From d_ttyname_r.U:

This variable conditionally defines the "HAS_TTYNAME_R" symbol, which indicates to the C program
that the ttyname_r() routine is available.

"d_tzname"
From d_tzname.U:

This variable conditionally defines "HAS_TZNAME" if tzname[] is available to access timezone
names.

"d_u32align"
From d_u32align.U:

This variable tells whether you must access character data through U32-aligned pointers.

"d_ualarm"
From d_ualarm.U:

This variable conditionally defines the "HAS_UALARM" symbol, which indicates to the C program
that the ualarm() routine is available.

"d_umask"
From d_umask.U:

This variable conditionally defines the "HAS_UMASK" symbol, which indicates to the C program that
the umask() routine is available. to set and get the value of the file creation mask.

"d_uname"
From d_gethname.U:

This variable conditionally defines the "HAS_UNAME" symbol, which indicates to the C program that
the uname() routine may be used to derive the host name.

"d_union_semun"
From d_union_semun.U:

This variable conditionally defines "HAS_UNION_SEMUN" if the union semun is defined by including
<sys/sem.h>.

"d_unordered"
From d_unordered.U:

This variable conditionally defines the "HAS_UNORDERED" symbol, which indicates to the C program
that the unordered() routine is available.

"d_unsetenv"
From d_unsetenv.U:

This variable conditionally defines the "HAS_UNSETENV" symbol, which indicates to the C program
that the unsetenv () routine is available.

"d_usleep"
From d_usleep.U:

This variable conditionally defines "HAS_USLEEP" if usleep() is available to do high granularity
sleeps.

"d_usleepproto"
From d_usleepproto.U:

This variable conditionally defines the "HAS_USLEEP_PROTO" symbol, which indicates to the C
program that the system provides a prototype for the usleep() function. Otherwise, it is up to
the program to supply one.

"d_ustat"
From d_ustat.U:

This variable conditionally defines "HAS_USTAT" if ustat() is available to query file system
statistics by dev_t.

"d_vendorarch"
From vendorarch.U:

This variable conditionally defined "PERL_VENDORARCH".

"d_vendorbin"
From vendorbin.U:

This variable conditionally defines "PERL_VENDORBIN".

"d_vendorlib"
From vendorlib.U:

This variable conditionally defines "PERL_VENDORLIB".

"d_vendorscript"
From vendorscript.U:

This variable conditionally defines "PERL_VENDORSCRIPT".

"d_vfork"
From d_vfork.U:

This variable conditionally defines the "HAS_VFORK" symbol, which indicates the vfork() routine
is available.

"d_void_closedir"
From d_closedir.U:

This variable conditionally defines "VOID_CLOSEDIR" if closedir() does not return a value.

"d_voidsig"
From d_voidsig.U:

This variable conditionally defines "VOIDSIG" if this system declares "void (*signal(...))()" in
signal.h. The old way was to declare it as "int (*signal(...))()".

"d_voidtty"
From i_sysioctl.U:

This variable conditionally defines "USE_IOCNOTTY" to indicate that the ioctl() call with
"TIOCNOTTY" should be used to void tty association. Otherwise (on "USG" probably), it is enough
to close the standard file descriptors and do a setpgrp().

"d_volatile"
From d_volatile.U:

This variable conditionally defines the "HASVOLATILE" symbol, which indicates to the C program
that this C compiler knows about the volatile declaration.

"d_vprintf"
From d_vprintf.U:

This variable conditionally defines the "HAS_VPRINTF" symbol, which indicates to the C program
that the vprintf() routine is available to printf with a pointer to an argument list.

"d_vsnprintf"
From d_snprintf.U:

This variable conditionally defines the "HAS_VSNPRINTF" symbol, which indicates to the C program
that the vsnprintf () library function is available.

"d_wait4"
From d_wait4.U:

This variable conditionally defines the HAS_WAIT4 symbol, which indicates the wait4() routine is
available.

"d_waitpid"
From d_waitpid.U:

This variable conditionally defines "HAS_WAITPID" if waitpid() is available to wait for child
process.

"d_wcstombs"
From d_wcstombs.U:

This variable conditionally defines the "HAS_WCSTOMBS" symbol, which indicates to the C program
that the wcstombs() routine is available to convert wide character strings to multibyte strings.

"d_wctomb"
From d_wctomb.U:

This variable conditionally defines the "HAS_WCTOMB" symbol, which indicates to the C program
that the wctomb() routine is available to convert a wide character to a multibyte.

"d_writev"
From d_writev.U:

This variable conditionally defines the "HAS_WRITEV" symbol, which indicates to the C program
that the writev() routine is available.

"d_xenix"
From Guess.U:

This variable conditionally defines the symbol "XENIX", which alerts the C program that it runs
under Xenix.

"date"
From Loc.U:

This variable is used internally by Configure to determine the full pathname (if any) of the date
program. After Configure runs, the value is reset to a plain "date" and is not useful.

"db_hashtype"
From i_db.U:

This variable contains the type of the hash structure element in the <db.h> header file. In
older versions of "DB", it was int, while in newer ones it is u_int32_t.

"db_prefixtype"
From i_db.U:

This variable contains the type of the prefix structure element in the <db.h> header file. In
older versions of "DB", it was int, while in newer ones it is size_t.

"db_version_major"
From i_db.U:

This variable contains the major version number of Berkeley "DB" found in the <db.h> header file.

"db_version_minor"
From i_db.U:

This variable contains the minor version number of Berkeley "DB" found in the <db.h> header file.
For "DB" version 1 this is always 0.

"db_version_patch"
From i_db.U:

This variable contains the patch version number of Berkeley "DB" found in the <db.h> header file.
For "DB" version 1 this is always 0.

"defvoidused"
From voidflags.U:

This variable contains the default value of the "VOIDUSED" symbol (15).

"direntrytype"
From i_dirent.U:

This symbol is set to "struct direct" or "struct dirent" depending on whether dirent is available
or not. You should use this pseudo type to portably declare your directory entries.

"dlext"
From dlext.U:

This variable contains the extension that is to be used for the dynamically loaded modules that
perl generaties.

"dlsrc"
From dlsrc.U:

This variable contains the name of the dynamic loading file that will be used with the package.

"doublesize"
From doublesize.U:

This variable contains the value of the "DOUBLESIZE" symbol, which indicates to the C program how
many bytes there are in a double.

"drand01"
From randfunc.U:

Indicates the macro to be used to generate normalized random numbers. Uses randfunc, often
divided by (double) (((unsigned long) 1 << randbits)) in order to normalize the result. In C
programs, the macro "Drand01" is mapped to drand01.

"drand48_r_proto"
From d_drand48_r.U:

This variable encodes the prototype of drand48_r. It is zero if d_drand48_r is undef, and one of
the "REENTRANT_PROTO_T_ABC" macros of reentr.h if d_drand48_r is defined.

"dtrace"
From usedtrace.U:

This variable holds the location of the dtrace executable.

"dynamic_ext"
From Extensions.U:

This variable holds a list of "XS" extension files we want to link dynamically into the package.
It is used by Makefile.

e
"eagain"
From nblock_io.U:

This variable bears the symbolic errno code set by read() when no data is present on the file and
non-blocking I/O was enabled (otherwise, read() blocks naturally).

"ebcdic"
From ebcdic.U:

This variable conditionally defines "EBCDIC" if this system uses "EBCDIC" encoding. Among other
things, this means that the character ranges are not contiguous. See trnl.U

"echo"
From Loc.U:

This variable is used internally by Configure to determine the full pathname (if any) of the echo
program. After Configure runs, the value is reset to a plain "echo" and is not useful.

"egrep"
From Loc.U:

This variable is used internally by Configure to determine the full pathname (if any) of the
egrep program. After Configure runs, the value is reset to a plain "egrep" and is not useful.

"emacs"
From Loc.U:

This variable is defined but not used by Configure. The value is the empty string and is not
useful.

"endgrent_r_proto"
From d_endgrent_r.U:

This variable encodes the prototype of endgrent_r. It is zero if d_endgrent_r is undef, and one
of the "REENTRANT_PROTO_T_ABC" macros of reentr.h if d_endgrent_r is defined.

"endhostent_r_proto"
From d_endhostent_r.U:

This variable encodes the prototype of endhostent_r. It is zero if d_endhostent_r is undef, and
one of the "REENTRANT_PROTO_T_ABC" macros of reentr.h if d_endhostent_r is defined.

"endnetent_r_proto"
From d_endnetent_r.U:

This variable encodes the prototype of endnetent_r. It is zero if d_endnetent_r is undef, and
one of the "REENTRANT_PROTO_T_ABC" macros of reentr.h if d_endnetent_r is defined.

"endprotoent_r_proto"
From d_endprotoent_r.U:

This variable encodes the prototype of endprotoent_r. It is zero if d_endprotoent_r is undef,
and one of the "REENTRANT_PROTO_T_ABC" macros of reentr.h if d_endprotoent_r is defined.

"endpwent_r_proto"
From d_endpwent_r.U:

This variable encodes the prototype of endpwent_r. It is zero if d_endpwent_r is undef, and one
of the "REENTRANT_PROTO_T_ABC" macros of reentr.h if d_endpwent_r is defined.

"endservent_r_proto"
From d_endservent_r.U:

This variable encodes the prototype of endservent_r. It is zero if d_endservent_r is undef, and
one of the "REENTRANT_PROTO_T_ABC" macros of reentr.h if d_endservent_r is defined.

"eunicefix"
From Init.U:

When running under Eunice this variable contains a command which will convert a shell script to
the proper form of text file for it to be executable by the shell. On other systems it is a no-
op.

"exe_ext"
From Unix.U:

This is an old synonym for _exe.

"expr"
From Loc.U:

This variable is used internally by Configure to determine the full pathname (if any) of the expr
program. After Configure runs, the value is reset to a plain "expr" and is not useful.

"extensions"
From Extensions.U:

This variable holds a list of all extension files (both "XS" and non-xs linked into the package.
It is propagated to Config.pm and is typically used to test whether a particular extension is
available.

"extern_C"
From Csym.U:

"ANSI" C requires "extern" where C++ requires 'extern "C"'. This variable can be used in
Configure to do the right thing.

"extras"
From Extras.U:

This variable holds a list of extra modules to install.

f
"fflushall"
From fflushall.U:

This symbol, if defined, tells that to flush all pending stdio output one must loop through all
the stdio file handles stored in an array and fflush them. Note that if fflushNULL is defined,
fflushall will not even be probed for and will be left undefined.

"fflushNULL"
From fflushall.U:

This symbol, if defined, tells that fflush("NULL") does flush all pending stdio output.

"find"
From Loc.U:

This variable is defined but not used by Configure. The value is the empty string and is not
useful.

"firstmakefile"
From Unix.U:

This variable defines the first file searched by make. On unix, it is makefile (then Makefile).
On case-insensitive systems, it might be something else. This is only used to deal with
convoluted make depend tricks.

"flex"
From Loc.U:

This variable is defined but not used by Configure. The value is the empty string and is not
useful.

"fpossize"
From fpossize.U:

This variable contains the size of a fpostype in bytes.

"fpostype"
From fpostype.U:

This variable defines Fpos_t to be something like fpos_t, long, uint, or whatever type is used to
declare file positions in libc.

"freetype"
From mallocsrc.U:

This variable contains the return type of free(). It is usually void, but occasionally int.

"from"
From Cross.U:

This variable contains the command used by Configure to copy files from the target host. Useful
and available only during Perl build. The string ":" if not cross-compiling.

"full_ar"
From Loc_ar.U:

This variable contains the full pathname to "ar", whether or not the user has specified
"portability". This is only used in the Makefile.SH.

"full_csh"
From d_csh.U:

This variable contains the full pathname to "csh", whether or not the user has specified
"portability". This is only used in the compiled C program, and we assume that all systems which
can share this executable will have the same full pathname to csh.

"full_sed"
From Loc_sed.U:

This variable contains the full pathname to "sed", whether or not the user has specified
"portability". This is only used in the compiled C program, and we assume that all systems which
can share this executable will have the same full pathname to sed.

g
"gccansipedantic"
From gccvers.U:

If "GNU" cc (gcc) is used, this variable will enable (if set) the -ansi and -pedantic ccflags for
building core files (through cflags script). (See Porting/pumpkin.pod for full description).

"gccosandvers"
From gccvers.U:

If "GNU" cc (gcc) is used, this variable holds the operating system and version used to compile
gcc. It is set to '' if not gcc, or if nothing useful can be parsed as the os version.

"gccversion"
From gccvers.U:

If "GNU" cc (gcc) is used, this variable holds 1 or 2 to indicate whether the compiler is version
1 or 2. This is used in setting some of the default cflags. It is set to '' if not gcc.

"getgrent_r_proto"
From d_getgrent_r.U:

This variable encodes the prototype of getgrent_r. It is zero if d_getgrent_r is undef, and one
of the "REENTRANT_PROTO_T_ABC" macros of reentr.h if d_getgrent_r is defined.

"getgrgid_r_proto"
From d_getgrgid_r.U:

This variable encodes the prototype of getgrgid_r. It is zero if d_getgrgid_r is undef, and one
of the "REENTRANT_PROTO_T_ABC" macros of reentr.h if d_getgrgid_r is defined.

"getgrnam_r_proto"
From d_getgrnam_r.U:

This variable encodes the prototype of getgrnam_r. It is zero if d_getgrnam_r is undef, and one
of the "REENTRANT_PROTO_T_ABC" macros of reentr.h if d_getgrnam_r is defined.

"gethostbyaddr_r_proto"
From d_gethostbyaddr_r.U:

This variable encodes the prototype of gethostbyaddr_r. It is zero if d_gethostbyaddr_r is
undef, and one of the "REENTRANT_PROTO_T_ABC" macros of reentr.h if d_gethostbyaddr_r is defined.

"gethostbyname_r_proto"
From d_gethostbyname_r.U:

This variable encodes the prototype of gethostbyname_r. It is zero if d_gethostbyname_r is
undef, and one of the "REENTRANT_PROTO_T_ABC" macros of reentr.h if d_gethostbyname_r is defined.

"gethostent_r_proto"
From d_gethostent_r.U:

This variable encodes the prototype of gethostent_r. It is zero if d_gethostent_r is undef, and
one of the "REENTRANT_PROTO_T_ABC" macros of reentr.h if d_gethostent_r is defined.

"getlogin_r_proto"
From d_getlogin_r.U:

This variable encodes the prototype of getlogin_r. It is zero if d_getlogin_r is undef, and one
of the "REENTRANT_PROTO_T_ABC" macros of reentr.h if d_getlogin_r is defined.

"getnetbyaddr_r_proto"
From d_getnetbyaddr_r.U:

This variable encodes the prototype of getnetbyaddr_r. It is zero if d_getnetbyaddr_r is undef,
and one of the "REENTRANT_PROTO_T_ABC" macros of reentr.h if d_getnetbyaddr_r is defined.

"getnetbyname_r_proto"
From d_getnetbyname_r.U:

This variable encodes the prototype of getnetbyname_r. It is zero if d_getnetbyname_r is undef,
and one of the "REENTRANT_PROTO_T_ABC" macros of reentr.h if d_getnetbyname_r is defined.

"getnetent_r_proto"
From d_getnetent_r.U:

This variable encodes the prototype of getnetent_r. It is zero if d_getnetent_r is undef, and
one of the "REENTRANT_PROTO_T_ABC" macros of reentr.h if d_getnetent_r is defined.

"getprotobyname_r_proto"
From d_getprotobyname_r.U:

This variable encodes the prototype of getprotobyname_r. It is zero if d_getprotobyname_r is
undef, and one of the "REENTRANT_PROTO_T_ABC" macros of reentr.h if d_getprotobyname_r is
defined.

"getprotobynumber_r_proto"
From d_getprotobynumber_r.U:

This variable encodes the prototype of getprotobynumber_r. It is zero if d_getprotobynumber_r is
undef, and one of the "REENTRANT_PROTO_T_ABC" macros of reentr.h if d_getprotobynumber_r is
defined.

"getprotoent_r_proto"
From d_getprotoent_r.U:

This variable encodes the prototype of getprotoent_r. It is zero if d_getprotoent_r is undef,
and one of the "REENTRANT_PROTO_T_ABC" macros of reentr.h if d_getprotoent_r is defined.

"getpwent_r_proto"
From d_getpwent_r.U:

This variable encodes the prototype of getpwent_r. It is zero if d_getpwent_r is undef, and one
of the "REENTRANT_PROTO_T_ABC" macros of reentr.h if d_getpwent_r is defined.

"getpwnam_r_proto"
From d_getpwnam_r.U:

This variable encodes the prototype of getpwnam_r. It is zero if d_getpwnam_r is undef, and one
of the "REENTRANT_PROTO_T_ABC" macros of reentr.h if d_getpwnam_r is defined.

"getpwuid_r_proto"
From d_getpwuid_r.U:

This variable encodes the prototype of getpwuid_r. It is zero if d_getpwuid_r is undef, and one
of the "REENTRANT_PROTO_T_ABC" macros of reentr.h if d_getpwuid_r is defined.

"getservbyname_r_proto"
From d_getservbyname_r.U:

This variable encodes the prototype of getservbyname_r. It is zero if d_getservbyname_r is
undef, and one of the "REENTRANT_PROTO_T_ABC" macros of reentr.h if d_getservbyname_r is defined.

"getservbyport_r_proto"
From d_getservbyport_r.U:

This variable encodes the prototype of getservbyport_r. It is zero if d_getservbyport_r is
undef, and one of the "REENTRANT_PROTO_T_ABC" macros of reentr.h if d_getservbyport_r is defined.

"getservent_r_proto"
From d_getservent_r.U:

This variable encodes the prototype of getservent_r. It is zero if d_getservent_r is undef, and
one of the "REENTRANT_PROTO_T_ABC" macros of reentr.h if d_getservent_r is defined.

"getspnam_r_proto"
From d_getspnam_r.U:

This variable encodes the prototype of getspnam_r. It is zero if d_getspnam_r is undef, and one
of the "REENTRANT_PROTO_T_ABC" macros of reentr.h if d_getspnam_r is defined.

"gidformat"
From gidf.U:

This variable contains the format string used for printing a Gid_t.

"gidsign"
From gidsign.U:

This variable contains the signedness of a gidtype. 1 for unsigned, -1 for signed.

"gidsize"
From gidsize.U:

This variable contains the size of a gidtype in bytes.

"gidtype"
From gidtype.U:

This variable defines Gid_t to be something like gid_t, int, ushort, or whatever type is used to
declare the return type of getgid(). Typically, it is the type of group ids in the kernel.

"glibpth"
From libpth.U:

This variable holds the general path (space-separated) used to find libraries. It may contain
directories that do not exist on this platform, libpth is the cleaned-up version.

"gmake"
From Loc.U:

This variable is used internally by Configure to determine the full pathname (if any) of the
gmake program. After Configure runs, the value is reset to a plain "gmake" and is not useful.

"gmtime_r_proto"
From d_gmtime_r.U:

This variable encodes the prototype of gmtime_r. It is zero if d_gmtime_r is undef, and one of
the "REENTRANT_PROTO_T_ABC" macros of reentr.h if d_gmtime_r is defined.

"gnulibc_version"
From d_gnulibc.U:

This variable contains the version number of the "GNU" C library. It is usually something like
2.2.5. It is a plain '' if this is not the "GNU" C library, or if the version is unknown.

"grep"
From Loc.U:

This variable is used internally by Configure to determine the full pathname (if any) of the grep
program. After Configure runs, the value is reset to a plain "grep" and is not useful.

"groupcat"
From nis.U:

This variable contains a command that produces the text of the /etc/group file. This is normally
"cat /etc/group", but can be "ypcat group" when "NIS" is used. On some systems, such as os390,
there may be no equivalent command, in which case this variable is unset.

"groupstype"
From groupstype.U:

This variable defines Groups_t to be something like gid_t, int, ushort, or whatever type is used
for the second argument to getgroups() and setgroups(). Usually, this is the same as gidtype
(gid_t), but sometimes it isn't.

"gzip"
From Loc.U:

This variable is used internally by Configure to determine the full pathname (if any) of the gzip
program. After Configure runs, the value is reset to a plain "gzip" and is not useful.

h
"h_fcntl"
From h_fcntl.U:

This is variable gets set in various places to tell i_fcntl that <fcntl.h> should be included.

"h_sysfile"
From h_sysfile.U:

This is variable gets set in various places to tell i_sys_file that <sys/file.h> should be
included.

"hint"
From Oldconfig.U:

Gives the type of hints used for previous answers. May be one of "default", "recommended" or
"previous".

"hostcat"
From nis.U:

This variable contains a command that produces the text of the /etc/hosts file. This is normally
"cat /etc/hosts", but can be "ypcat hosts" when "NIS" is used. On some systems, such as os390,
there may be no equivalent command, in which case this variable is unset.

"html1dir"
From html1dir.U:

This variable contains the name of the directory in which html source pages are to be put. This
directory is for pages that describe whole programs, not libraries or modules. It is intended to
correspond roughly to section 1 of the Unix manuals.

"html1direxp"
From html1dir.U:

This variable is the same as the html1dir variable, but is filename expanded at configuration
time, for convenient use in makefiles.

"html3dir"
From html3dir.U:

This variable contains the name of the directory in which html source pages are to be put. This
directory is for pages that describe libraries or modules. It is intended to correspond roughly
to section 3 of the Unix manuals.

"html3direxp"
From html3dir.U:

This variable is the same as the html3dir variable, but is filename expanded at configuration
time, for convenient use in makefiles.

i
"i16size"
From perlxv.U:

This variable is the size of an I16 in bytes.

"i16type"
From perlxv.U:

This variable contains the C type used for Perl's I16.

"i32size"
From perlxv.U:

This variable is the size of an I32 in bytes.

"i32type"
From perlxv.U:

This variable contains the C type used for Perl's I32.

"i64size"
From perlxv.U:

This variable is the size of an I64 in bytes.

"i64type"
From perlxv.U:

This variable contains the C type used for Perl's I64.

"i8size"
From perlxv.U:

This variable is the size of an I8 in bytes.

"i8type"
From perlxv.U:

This variable contains the C type used for Perl's I8.

"i_arpainet"
From i_arpainet.U:

This variable conditionally defines the "I_ARPA_INET" symbol, and indicates whether a C program
should include <arpa/inet.h>.

"i_assert"
From i_assert.U:

This variable conditionally defines the "I_ASSERT" symbol, which indicates to the C program that
<assert.h> exists and could be included.

"i_bsdioctl"
From i_sysioctl.U:

This variable conditionally defines the "I_SYS_BSDIOCTL" symbol, which indicates to the C program
that <sys/bsdioctl.h> exists and should be included.

"i_crypt"
From i_crypt.U:

This variable conditionally defines the "I_CRYPT" symbol, and indicates whether a C program
should include <crypt.h>.

"i_db"
From i_db.U:

This variable conditionally defines the "I_DB" symbol, and indicates whether a C program may
include Berkeley's "DB" include file <db.h>.

"i_dbm"
From i_dbm.U:

This variable conditionally defines the "I_DBM" symbol, which indicates to the C program that
<dbm.h> exists and should be included.

"i_dirent"
From i_dirent.U:

This variable conditionally defines "I_DIRENT", which indicates to the C program that it should
include <dirent.h>.

"i_dld"
From i_dld.U:

This variable conditionally defines the "I_DLD" symbol, which indicates to the C program that
<dld.h> ("GNU" dynamic loading) exists and should be included.

"i_dlfcn"
From i_dlfcn.U:

This variable conditionally defines the "I_DLFCN" symbol, which indicates to the C program that
<dlfcn.h> exists and should be included.

"i_fcntl"
From i_fcntl.U:

This variable controls the value of "I_FCNTL" (which tells the C program to include <fcntl.h>).

"i_float"
From i_float.U:

This variable conditionally defines the "I_FLOAT" symbol, and indicates whether a C program may
include <float.h> to get symbols like "DBL_MAX" or "DBL_MIN", i.e. machine dependent floating
point values.

"i_fp"
From i_fp.U:

This variable conditionally defines the "I_FP" symbol, and indicates whether a C program should
include <fp.h>.

"i_fp_class"
From i_fp_class.U:

This variable conditionally defines the "I_FP_CLASS" symbol, and indicates whether a C program
should include <fp_class.h>.

"i_gdbm"
From i_gdbm.U:

This variable conditionally defines the "I_GDBM" symbol, which indicates to the C program that
<gdbm.h> exists and should be included.

"i_gdbm_ndbm"
From i_ndbm.U:

This variable conditionally defines the "I_GDBM_NDBM" symbol, which indicates to the C program
that <gdbm-ndbm.h> exists and should be included. This is the location of the ndbm.h
compatibility file in Debian 4.0.

"i_gdbmndbm"
From i_ndbm.U:

This variable conditionally defines the "I_GDBMNDBM" symbol, which indicates to the C program
that <gdbm/ndbm.h> exists and should be included. This was the location of the ndbm.h
compatibility file in RedHat 7.1.

"i_grp"
From i_grp.U:

This variable conditionally defines the "I_GRP" symbol, and indicates whether a C program should
include <grp.h>.

"i_ieeefp"
From i_ieeefp.U:

This variable conditionally defines the "I_IEEEFP" symbol, and indicates whether a C program
should include <ieeefp.h>.

"i_inttypes"
From i_inttypes.U:

This variable conditionally defines the "I_INTTYPES" symbol, and indicates whether a C program
should include <inttypes.h>.

"i_langinfo"
From i_langinfo.U:

This variable conditionally defines the "I_LANGINFO" symbol, and indicates whether a C program
should include <langinfo.h>.

"i_libutil"
From i_libutil.U:

This variable conditionally defines the "I_LIBUTIL" symbol, and indicates whether a C program
should include <libutil.h>.

"i_limits"
From i_limits.U:

This variable conditionally defines the "I_LIMITS" symbol, and indicates whether a C program may
include <limits.h> to get symbols like "WORD_BIT" and friends.

"i_locale"
From i_locale.U:

This variable conditionally defines the "I_LOCALE" symbol, and indicates whether a C program
should include <locale.h>.

"i_machcthr"
From i_machcthr.U:

This variable conditionally defines the "I_MACH_CTHREADS" symbol, and indicates whether a C
program should include <mach/cthreads.h>.

"i_malloc"
From i_malloc.U:

This variable conditionally defines the "I_MALLOC" symbol, and indicates whether a C program
should include <malloc.h>.

"i_mallocmalloc"
From i_mallocmalloc.U:

This variable conditionally defines the "I_MALLOCMALLOC" symbol, and indicates whether a C
program should include <malloc/malloc.h>.

"i_math"
From i_math.U:

This variable conditionally defines the "I_MATH" symbol, and indicates whether a C program may
include <math.h>.

"i_memory"
From i_memory.U:

This variable conditionally defines the "I_MEMORY" symbol, and indicates whether a C program
should include <memory.h>.

"i_mntent"
From i_mntent.U:

This variable conditionally defines the "I_MNTENT" symbol, and indicates whether a C program
should include <mntent.h>.

"i_ndbm"
From i_ndbm.U:

This variable conditionally defines the "I_NDBM" symbol, which indicates to the C program that
<ndbm.h> exists and should be included.

"i_netdb"
From i_netdb.U:

This variable conditionally defines the "I_NETDB" symbol, and indicates whether a C program
should include <netdb.h>.

"i_neterrno"
From i_neterrno.U:

This variable conditionally defines the "I_NET_ERRNO" symbol, which indicates to the C program
that <net/errno.h> exists and should be included.

"i_netinettcp"
From i_netinettcp.U:

This variable conditionally defines the "I_NETINET_TCP" symbol, and indicates whether a C program
should include <netinet/tcp.h>.

"i_niin"
From i_niin.U:

This variable conditionally defines "I_NETINET_IN", which indicates to the C program that it
should include <netinet/in.h>. Otherwise, you may try <sys/in.h>.

"i_poll"
From i_poll.U:

This variable conditionally defines the "I_POLL" symbol, and indicates whether a C program should
include <poll.h>.

"i_prot"
From i_prot.U:

This variable conditionally defines the "I_PROT" symbol, and indicates whether a C program should
include <prot.h>.

"i_pthread"
From i_pthread.U:

This variable conditionally defines the "I_PTHREAD" symbol, and indicates whether a C program
should include <pthread.h>.

"i_pwd"
From i_pwd.U:

This variable conditionally defines "I_PWD", which indicates to the C program that it should
include <pwd.h>.

"i_rpcsvcdbm"
From i_dbm.U:

This variable conditionally defines the "I_RPCSVC_DBM" symbol, which indicates to the C program
that <rpcsvc/dbm.h> exists and should be included. Some System V systems might need this instead
of <dbm.h>.

"i_sfio"
From i_sfio.U:

This variable conditionally defines the "I_SFIO" symbol, and indicates whether a C program should
include <sfio.h>.

"i_sgtty"
From i_termio.U:

This variable conditionally defines the "I_SGTTY" symbol, which indicates to the C program that
it should include <sgtty.h> rather than <termio.h>.

"i_shadow"
From i_shadow.U:

This variable conditionally defines the "I_SHADOW" symbol, and indicates whether a C program
should include <shadow.h>.

"i_socks"
From i_socks.U:

This variable conditionally defines the "I_SOCKS" symbol, and indicates whether a C program
should include <socks.h>.

"i_stdarg"
From i_varhdr.U:

This variable conditionally defines the "I_STDARG" symbol, which indicates to the C program that
<stdarg.h> exists and should be included.

"i_stdbool"
From i_stdbool.U:

This variable conditionally defines the "I_STDBOOL" symbol, which indicates to the C program that
<stdbool.h> exists and should be included.

"i_stddef"
From i_stddef.U:

This variable conditionally defines the "I_STDDEF" symbol, which indicates to the C program that
<stddef.h> exists and should be included.

"i_stdlib"
From i_stdlib.U:

This variable conditionally defines the "I_STDLIB" symbol, which indicates to the C program that
<stdlib.h> exists and should be included.

"i_string"
From i_string.U:

This variable conditionally defines the "I_STRING" symbol, which indicates that <string.h> should
be included rather than <strings.h>.

"i_sunmath"
From i_sunmath.U:

This variable conditionally defines the "I_SUNMATH" symbol, and indicates whether a C program
should include <sunmath.h>.

"i_sysaccess"
From i_sysaccess.U:

This variable conditionally defines the "I_SYS_ACCESS" symbol, and indicates whether a C program
should include <sys/access.h>.

"i_sysdir"
From i_sysdir.U:

This variable conditionally defines the "I_SYS_DIR" symbol, and indicates whether a C program
should include <sys/dir.h>.

"i_sysfile"
From i_sysfile.U:

This variable conditionally defines the "I_SYS_FILE" symbol, and indicates whether a C program
should include <sys/file.h> to get "R_OK" and friends.

"i_sysfilio"
From i_sysioctl.U:

This variable conditionally defines the "I_SYS_FILIO" symbol, which indicates to the C program
that <sys/filio.h> exists and should be included in preference to <sys/ioctl.h>.

"i_sysin"
From i_niin.U:

This variable conditionally defines "I_SYS_IN", which indicates to the C program that it should
include <sys/in.h> instead of <netinet/in.h>.

"i_sysioctl"
From i_sysioctl.U:

This variable conditionally defines the "I_SYS_IOCTL" symbol, which indicates to the C program
that <sys/ioctl.h> exists and should be included.

"i_syslog"
From i_syslog.U:

This variable conditionally defines the "I_SYSLOG" symbol, and indicates whether a C program
should include <syslog.h>.

"i_sysmman"
From i_sysmman.U:

This variable conditionally defines the "I_SYS_MMAN" symbol, and indicates whether a C program
should include <sys/mman.h>.

"i_sysmode"
From i_sysmode.U:

This variable conditionally defines the "I_SYSMODE" symbol, and indicates whether a C program
should include <sys/mode.h>.

"i_sysmount"
From i_sysmount.U:

This variable conditionally defines the "I_SYSMOUNT" symbol, and indicates whether a C program
should include <sys/mount.h>.

"i_sysndir"
From i_sysndir.U:

This variable conditionally defines the "I_SYS_NDIR" symbol, and indicates whether a C program
should include <sys/ndir.h>.

"i_sysparam"
From i_sysparam.U:

This variable conditionally defines the "I_SYS_PARAM" symbol, and indicates whether a C program
should include <sys/param.h>.

"i_syspoll"
From i_syspoll.U:

This variable conditionally defines the "I_SYS_POLL" symbol, which indicates to the C program
that it should include <sys/poll.h>.

"i_sysresrc"
From i_sysresrc.U:

This variable conditionally defines the "I_SYS_RESOURCE" symbol, and indicates whether a C
program should include <sys/resource.h>.

"i_syssecrt"
From i_syssecrt.U:

This variable conditionally defines the "I_SYS_SECURITY" symbol, and indicates whether a C
program should include <sys/security.h>.

"i_sysselct"
From i_sysselct.U:

This variable conditionally defines "I_SYS_SELECT", which indicates to the C program that it
should include <sys/select.h> in order to get the definition of struct timeval.

"i_syssockio"
From i_sysioctl.U:

This variable conditionally defines "I_SYS_SOCKIO" to indicate to the C program that socket ioctl
codes may be found in <sys/sockio.h> instead of <sys/ioctl.h>.

"i_sysstat"
From i_sysstat.U:

This variable conditionally defines the "I_SYS_STAT" symbol, and indicates whether a C program
should include <sys/stat.h>.

"i_sysstatfs"
From i_sysstatfs.U:

This variable conditionally defines the "I_SYSSTATFS" symbol, and indicates whether a C program
should include <sys/statfs.h>.

"i_sysstatvfs"
From i_sysstatvfs.U:

This variable conditionally defines the "I_SYSSTATVFS" symbol, and indicates whether a C program
should include <sys/statvfs.h>.

"i_systime"
From i_time.U:

This variable conditionally defines "I_SYS_TIME", which indicates to the C program that it should
include <sys/time.h>.

"i_systimek"
From i_time.U:

This variable conditionally defines "I_SYS_TIME_KERNEL", which indicates to the C program that it
should include <sys/time.h> with "KERNEL" defined.

"i_systimes"
From i_systimes.U:

This variable conditionally defines the "I_SYS_TIMES" symbol, and indicates whether a C program
should include <sys/times.h>.

"i_systypes"
From i_systypes.U:

This variable conditionally defines the "I_SYS_TYPES" symbol, and indicates whether a C program
should include <sys/types.h>.

"i_sysuio"
From i_sysuio.U:

This variable conditionally defines the "I_SYSUIO" symbol, and indicates whether a C program
should include <sys/uio.h>.

"i_sysun"
From i_sysun.U:

This variable conditionally defines "I_SYS_UN", which indicates to the C program that it should
include <sys/un.h> to get "UNIX" domain socket definitions.

"i_sysutsname"
From i_sysutsname.U:

This variable conditionally defines the "I_SYSUTSNAME" symbol, and indicates whether a C program
should include <sys/utsname.h>.

"i_sysvfs"
From i_sysvfs.U:

This variable conditionally defines the "I_SYSVFS" symbol, and indicates whether a C program
should include <sys/vfs.h>.

"i_syswait"
From i_syswait.U:

This variable conditionally defines "I_SYS_WAIT", which indicates to the C program that it should
include <sys/wait.h>.

"i_termio"
From i_termio.U:

This variable conditionally defines the "I_TERMIO" symbol, which indicates to the C program that
it should include <termio.h> rather than <sgtty.h>.

"i_termios"
From i_termio.U:

This variable conditionally defines the "I_TERMIOS" symbol, which indicates to the C program that
the "POSIX" <termios.h> file is to be included.

"i_time"
From i_time.U:

This variable conditionally defines "I_TIME", which indicates to the C program that it should
include <time.h>.

"i_unistd"
From i_unistd.U:

This variable conditionally defines the "I_UNISTD" symbol, and indicates whether a C program
should include <unistd.h>.

"i_ustat"
From i_ustat.U:

This variable conditionally defines the "I_USTAT" symbol, and indicates whether a C program
should include <ustat.h>.

"i_utime"
From i_utime.U:

This variable conditionally defines the "I_UTIME" symbol, and indicates whether a C program
should include <utime.h>.

"i_values"
From i_values.U:

This variable conditionally defines the "I_VALUES" symbol, and indicates whether a C program may
include <values.h> to get symbols like "MAXLONG" and friends.

"i_varargs"
From i_varhdr.U:

This variable conditionally defines "I_VARARGS", which indicates to the C program that it should
include <varargs.h>.

"i_varhdr"
From i_varhdr.U:

Contains the name of the header to be included to get va_dcl definition. Typically one of
varargs.h or stdarg.h.

"i_vfork"
From i_vfork.U:

This variable conditionally defines the "I_VFORK" symbol, and indicates whether a C program
should include vfork.h.

"ignore_versioned_solibs"
From libs.U:

This variable should be non-empty if non-versioned shared libraries (libfoo.so.x.y) are to be
ignored (because they cannot be linked against).

"inc_version_list"
From inc_version_list.U:

This variable specifies the list of subdirectories in over which perl.c:incpush() and lib/lib.pm
will automatically search when adding directories to @"INC". The elements in the list are
separated by spaces. This is only useful if you have a perl library directory tree structured
like the default one. See "INSTALL" for how this works. The versioned site_perl directory was
introduced in 5.005, so that is the lowest possible value.

This list includes architecture-dependent directories back to version $api_versionstring (e.g.
5.5.640) and architecture-independent directories all the way back to 5.005.

"inc_version_list_init"
From inc_version_list.U:

This variable holds the same list as inc_version_list, but each item is enclosed in double quotes
and separated by commas, suitable for use in the "PERL_INC_VERSION_LIST" initialization.

"incpath"
From usrinc.U:

This variable must precede the normal include path to get the right one, as in
$incpath/usr/include or $incpath/usr/lib. Value can be "" or /bsd43 on mips.

"inews"
From Loc.U:

This variable is defined but not used by Configure. The value is the empty string and is not
useful.

"initialinstalllocation"
From bin.U:

When userelocatableinc is true, this variable holds the location that make install should copy
the perl binary to, with all the run-time relocatable paths calculated from this at install time.
When used, it is initialised to the original value of binexp, and then binexp is set to .../, as
the other binaries are found relative to the perl binary.

"installarchlib"
From archlib.U:

This variable is really the same as archlibexp but may differ on those systems using "AFS". For
extra portability, only this variable should be used in makefiles.

"installbin"
From bin.U:

This variable is the same as binexp unless "AFS" is running in which case the user is explicitly
prompted for it. This variable should always be used in your makefiles for maximum portability.

"installhtml1dir"
From html1dir.U:

This variable is really the same as html1direxp, unless you are using a different installprefix.
For extra portability, you should only use this variable within your makefiles.

"installhtml3dir"
From html3dir.U:

This variable is really the same as html3direxp, unless you are using a different installprefix.
For extra portability, you should only use this variable within your makefiles.

"installman1dir"
From man1dir.U:

This variable is really the same as man1direxp, unless you are using "AFS" in which case it
points to the read/write location whereas man1direxp only points to the read-only access
location. For extra portability, you should only use this variable within your makefiles.

"installman3dir"
From man3dir.U:

This variable is really the same as man3direxp, unless you are using "AFS" in which case it
points to the read/write location whereas man3direxp only points to the read-only access
location. For extra portability, you should only use this variable within your makefiles.

"installprefix"
From installprefix.U:

This variable holds the name of the directory below which "make install" will install the
package. For most users, this is the same as prefix. However, it is useful for installing the
software into a different (usually temporary) location after which it can be bundled up and moved
somehow to the final location specified by prefix.

"installprefixexp"
From installprefix.U:

This variable holds the full absolute path of installprefix with all ~-expansion done.

"installprivlib"
From privlib.U:

This variable is really the same as privlibexp but may differ on those systems using "AFS". For
extra portability, only this variable should be used in makefiles.

"installscript"
From scriptdir.U:

This variable is usually the same as scriptdirexp, unless you are on a system running "AFS", in
which case they may differ slightly. You should always use this variable within your makefiles
for portability.

"installsitearch"
From sitearch.U:

This variable is really the same as sitearchexp but may differ on those systems using "AFS". For
extra portability, only this variable should be used in makefiles.

"installsitebin"
From sitebin.U:

This variable is usually the same as sitebinexp, unless you are on a system running "AFS", in
which case they may differ slightly. You should always use this variable within your makefiles
for portability.

"installsitehtml1dir"
From sitehtml1dir.U:

This variable is really the same as sitehtml1direxp, unless you are using "AFS" in which case it
points to the read/write location whereas html1direxp only points to the read-only access
location. For extra portability, you should only use this variable within your makefiles.

"installsitehtml3dir"
From sitehtml3dir.U:

This variable is really the same as sitehtml3direxp, unless you are using "AFS" in which case it
points to the read/write location whereas html3direxp only points to the read-only access
location. For extra portability, you should only use this variable within your makefiles.

"installsitelib"
From sitelib.U:

This variable is really the same as sitelibexp but may differ on those systems using "AFS". For
extra portability, only this variable should be used in makefiles.

"installsiteman1dir"
From siteman1dir.U:

This variable is really the same as siteman1direxp, unless you are using "AFS" in which case it
points to the read/write location whereas man1direxp only points to the read-only access
location. For extra portability, you should only use this variable within your makefiles.

"installsiteman3dir"
From siteman3dir.U:

This variable is really the same as siteman3direxp, unless you are using "AFS" in which case it
points to the read/write location whereas man3direxp only points to the read-only access
location. For extra portability, you should only use this variable within your makefiles.

"installsitescript"
From sitescript.U:

This variable is usually the same as sitescriptexp, unless you are on a system running "AFS", in
which case they may differ slightly. You should always use this variable within your makefiles
for portability.

"installstyle"
From installstyle.U:

This variable describes the "style" of the perl installation. This is intended to be useful for
tools that need to manipulate entire perl distributions. Perl itself doesn't use this to find
its libraries -- the library directories are stored directly in Config.pm. Currently, there are
only two styles: "lib" and lib/perl5. The default library locations (e.g. privlib, sitelib) are
either $prefix/lib or $prefix/lib/perl5. The former is useful if $prefix is a directory
dedicated to perl (e.g. /opt/perl), while the latter is useful if $prefix is shared by many
packages, e.g. if $prefix=/usr/local.

Unfortunately, while this "style" variable is used to set defaults for all three directory
hierarchies (core, vendor, and site), there is no guarantee that the same style is actually
appropriate for all those directories. For example, $prefix might be /opt/perl, but $siteprefix
might be /usr/local. (Perhaps, in retrospect, the "lib" style should never have been supported,
but it did seem like a nice idea at the time.)

The situation is even less clear for tools such as MakeMaker that can be used to install
additional modules into non-standard places. For example, if a user intends to install a module
into a private directory (perhaps by setting "PREFIX" on the Makefile.PL command line), then
there is no reason to assume that the Configure-time $installstyle setting will be relevant for
that "PREFIX".

This may later be extended to include other information, so be careful with pattern-matching on
the results.

For compatibility with perl5.__5 and earlier, the default setting is based on whether or not
$prefix contains the string "perl".

"installusrbinperl"
From instubperl.U:

This variable tells whether Perl should be installed also as /usr/bin/perl in addition to
$installbin/perl

"installvendorarch"
From vendorarch.U:

This variable is really the same as vendorarchexp but may differ on those systems using "AFS".
For extra portability, only this variable should be used in makefiles.

"installvendorbin"
From vendorbin.U:

This variable is really the same as vendorbinexp but may differ on those systems using "AFS". For
extra portability, only this variable should be used in makefiles.

"installvendorhtml1dir"
From vendorhtml1dir.U:

This variable is really the same as vendorhtml1direxp but may differ on those systems using
"AFS". For extra portability, only this variable should be used in makefiles.

"installvendorhtml3dir"
From vendorhtml3dir.U:

This variable is really the same as vendorhtml3direxp but may differ on those systems using
"AFS". For extra portability, only this variable should be used in makefiles.

"installvendorlib"
From vendorlib.U:

This variable is really the same as vendorlibexp but may differ on those systems using "AFS". For
extra portability, only this variable should be used in makefiles.

"installvendorman1dir"
From vendorman1dir.U:

This variable is really the same as vendorman1direxp but may differ on those systems using "AFS".
For extra portability, only this variable should be used in makefiles.

"installvendorman3dir"
From vendorman3dir.U:

This variable is really the same as vendorman3direxp but may differ on those systems using "AFS".
For extra portability, only this variable should be used in makefiles.

"installvendorscript"
From vendorscript.U:

This variable is really the same as vendorscriptexp but may differ on those systems using "AFS".
For extra portability, only this variable should be used in makefiles.

"intsize"
From intsize.U:

This variable contains the value of the "INTSIZE" symbol, which indicates to the C program how
many bytes there are in an int.

"issymlink"
From issymlink.U:

This variable holds the test command to test for a symbolic link (if they are supported).
Typical values include "test -h" and "test -L".

"ivdformat"
From perlxvf.U:

This variable contains the format string used for printing a Perl "IV" as a signed decimal
integer.

"ivsize"
From perlxv.U:

This variable is the size of an "IV" in bytes.

"ivtype"
From perlxv.U:

This variable contains the C type used for Perl's "IV".

k
"known_extensions"
From Extensions.U:

This variable holds a list of all "XS" extensions included in the package.

"ksh"
From Loc.U:

This variable is defined but not used by Configure. The value is the empty string and is not
useful.

l
"ld"
From dlsrc.U:

This variable indicates the program to be used to link libraries for dynamic loading. On some
systems, it is "ld". On "ELF" systems, it should be $cc. Mostly, we'll try to respect the hint
file setting.

"ld_can_script"
From dlsrc.U:

This variable shows if the loader accepts scripts in the form of -Wl,--version-script=ld.script.
This is currently only supported for "GNU" ld on "ELF" in dynamic loading builds.

"lddlflags"
From dlsrc.U:

This variable contains any special flags that might need to be passed to $ld to create a shared
library suitable for dynamic loading. It is up to the makefile to use it. For hpux, it should
be "-b". For sunos 4.1, it is empty.

"ldflags"
From ccflags.U:

This variable contains any additional C loader flags desired by the user. It is up to the
Makefile to use this.

"ldflags_uselargefiles"
From uselfs.U:

This variable contains the loader flags needed by large file builds and added to ldflags by hints
files.

"ldlibpthname"
From libperl.U:

This variable holds the name of the shared library search path, often "LD_LIBRARY_PATH". To get
an empty string, the hints file must set this to "none".

"less"
From Loc.U:

This variable is used internally by Configure to determine the full pathname (if any) of the less
program. After Configure runs, the value is reset to a plain "less" and is not useful.

"lib_ext"
From Unix.U:

This is an old synonym for _a.

"libc"
From libc.U:

This variable contains the location of the C library.

"libperl"
From libperl.U:

The perl executable is obtained by linking perlmain.c with libperl, any static extensions
(usually just DynaLoader), and any other libraries needed on this system. libperl is usually
libperl.a, but can also be libperl.so.xxx if the user wishes to build a perl executable with a
shared library.

"libpth"
From libpth.U:

This variable holds the general path (space-separated) used to find libraries. It is intended to
be used by other units.

"libs"
From libs.U:

This variable holds the additional libraries we want to use. It is up to the Makefile to deal
with it. The list can be empty.

"libsdirs"
From libs.U:

This variable holds the directory names aka dirnames of the libraries we found and accepted,
duplicates are removed.

"libsfiles"
From libs.U:

This variable holds the filenames aka basenames of the libraries we found and accepted.

"libsfound"
From libs.U:

This variable holds the full pathnames of the libraries we found and accepted.

"libspath"
From libs.U:

This variable holds the directory names probed for libraries.

"libswanted"
From Myinit.U:

This variable holds a list of all the libraries we want to search. The order is chosen to pick
up the c library ahead of ucb or bsd libraries for SVR4.

"libswanted_uselargefiles"
From uselfs.U:

This variable contains the libraries needed by large file builds and added to ldflags by hints
files. It is a space separated list of the library names without the "lib" prefix or any suffix,
just like libswanted..

"line"
From Loc.U:

This variable is defined but not used by Configure. The value is the empty string and is not
useful.

"lint"
From Loc.U:

This variable is defined but not used by Configure. The value is the empty string and is not
useful.

"lkflags"
From ccflags.U:

This variable contains any additional C partial linker flags desired by the user. It is up to
the Makefile to use this.

"ln"
From Loc.U:

This variable is used internally by Configure to determine the full pathname (if any) of the ln
program. After Configure runs, the value is reset to a plain "ln" and is not useful.

"lns"
From lns.U:

This variable holds the name of the command to make symbolic links (if they are supported). It
can be used in the Makefile. It is either "ln -s" or "ln"

"localtime_r_proto"
From d_localtime_r.U:

This variable encodes the prototype of localtime_r. It is zero if d_localtime_r is undef, and
one of the "REENTRANT_PROTO_T_ABC" macros of reentr.h if d_localtime_r is defined.

"locincpth"
From ccflags.U:

This variable contains a list of additional directories to be searched by the compiler. The
appropriate "-I" directives will be added to ccflags. This is intended to simplify setting local
directories from the Configure command line. It's not much, but it parallels the loclibpth stuff
in libpth.U.

"loclibpth"
From libpth.U:

This variable holds the paths (space-separated) used to find local libraries. It is prepended to
libpth, and is intended to be easily set from the command line.

"longdblsize"
From d_longdbl.U:

This variable contains the value of the "LONG_DOUBLESIZE" symbol, which indicates to the C
program how many bytes there are in a long double, if this system supports long doubles.

"longlongsize"
From d_longlong.U:

This variable contains the value of the "LONGLONGSIZE" symbol, which indicates to the C program
how many bytes there are in a long long, if this system supports long long.

"longsize"
From intsize.U:

This variable contains the value of the "LONGSIZE" symbol, which indicates to the C program how
many bytes there are in a long.

"lp"
From Loc.U:

This variable is defined but not used by Configure. The value is the empty string and is not
useful.

"lpr"
From Loc.U:

This variable is defined but not used by Configure. The value is the empty string and is not
useful.

"ls"
From Loc.U:

This variable is used internally by Configure to determine the full pathname (if any) of the ls
program. After Configure runs, the value is reset to a plain "ls" and is not useful.

"lseeksize"
From lseektype.U:

This variable defines lseektype to be something like off_t, long, or whatever type is used to
declare lseek offset's type in the kernel (which also appears to be lseek's return type).

"lseektype"
From lseektype.U:

This variable defines lseektype to be something like off_t, long, or whatever type is used to
declare lseek offset's type in the kernel (which also appears to be lseek's return type).

m
"mad"
From mad.U:

This variable indicates that the Misc Attribute Definition code is to be compiled.

"madlyh"
From mad.U:

If the Misc Attribute Decoration is to be compiled, this variable is set to the name of the extra
header files to be used, else it is ''

"madlyobj"
From mad.U:

If the Misc Attribute Decoration is to be compiled, this variable is set to the name of the extra
object files to be used, else it is ''

"madlysrc"
From mad.U:

If the Misc Attribute Decoration is to be compiled, this variable is set to the name of the extra
C source files to be used, else it is ''

"mail"
From Loc.U:

This variable is defined but not used by Configure. The value is the empty string and is not
useful.

"mailx"
From Loc.U:

This variable is defined but not used by Configure. The value is the empty string and is not
useful.

"make"
From Loc.U:

This variable is used internally by Configure to determine the full pathname (if any) of the make
program. After Configure runs, the value is reset to a plain "make" and is not useful.

"make_set_make"
From make.U:

Some versions of "make" set the variable "MAKE". Others do not. This variable contains the
string to be included in Makefile.SH so that "MAKE" is set if needed, and not if not needed.
Possible values are:

make_set_make="#" # If your make program handles this for you,

make_set_make="MAKE=$make" # if it doesn't.

This uses a comment character so that we can distinguish a "set" value (from a previous config.sh
or Configure "-D" option) from an uncomputed value.

"mallocobj"
From mallocsrc.U:

This variable contains the name of the malloc.o that this package generates, if that malloc.o is
preferred over the system malloc. Otherwise the value is null. This variable is intended for
generating Makefiles. See mallocsrc.

"mallocsrc"
From mallocsrc.U:

This variable contains the name of the malloc.c that comes with the package, if that malloc.c is
preferred over the system malloc. Otherwise the value is null. This variable is intended for
generating Makefiles.

"malloctype"
From mallocsrc.U:

This variable contains the kind of ptr returned by malloc and realloc.

"man1dir"
From man1dir.U:

This variable contains the name of the directory in which manual source pages are to be put. It
is the responsibility of the Makefile.SH to get the value of this into the proper command. You
must be prepared to do the ~name expansion yourself.

"man1direxp"
From man1dir.U:

This variable is the same as the man1dir variable, but is filename expanded at configuration
time, for convenient use in makefiles.

"man1ext"
From man1dir.U:

This variable contains the extension that the manual page should have: one of "n", "l", or 1.
The Makefile must supply the .. See man1dir.

"man3dir"
From man3dir.U:

"man3direxp"
From man3dir.U:

This variable is the same as the man3dir variable, but is filename expanded at configuration
time, for convenient use in makefiles.

"man3ext"
From man3dir.U:

This variable contains the extension that the manual page should have: one of "n", "l", or 3.
The Makefile must supply the .. See man3dir.

"mips_type"
From usrinc.U:

This variable holds the environment type for the mips system. Possible values are "BSD 4.3" and
"System V".

"mistrustnm"
From Csym.U:

This variable can be used to establish a fallthrough for the cases where nm fails to find a
symbol. If usenm is false or usenm is true and mistrustnm is false, this variable has no effect.
If usenm is true and mistrustnm is "compile", a test program will be compiled to try to find any
symbol that can't be located via nm lookup. If mistrustnm is "run", the test program will be run
as well as being compiled.

"mkdir"
From Loc.U:

This variable is used internally by Configure to determine the full pathname (if any) of the
mkdir program. After Configure runs, the value is reset to a plain "mkdir" and is not useful.

"mmaptype"
From d_mmap.U:

This symbol contains the type of pointer returned by mmap() (and simultaneously the type of the
first argument). It can be "void *" or "caddr_t".

"modetype"
From modetype.U:

This variable defines modetype to be something like mode_t, int, unsigned short, or whatever type
is used to declare file modes for system calls.

"more"
From Loc.U:

This variable is used internally by Configure to determine the full pathname (if any) of the more
program. After Configure runs, the value is reset to a plain "more" and is not useful.

"multiarch"
From multiarch.U:

This variable conditionally defines the "MULTIARCH" symbol which signifies the presence of
multiplatform files. This is normally set by hints files.

"mv"
From Loc.U:

This variable is defined but not used by Configure. The value is the empty string and is not
useful.

"myarchname"
From archname.U:

This variable holds the architecture name computed by Configure in a previous run. It is not
intended to be perused by any user and should never be set in a hint file.

"mydomain"
From myhostname.U:

This variable contains the eventual value of the "MYDOMAIN" symbol, which is the domain of the
host the program is going to run on. The domain must be appended to myhostname to form a
complete host name. The dot comes with mydomain, and need not be supplied by the program.

"myhostname"
From myhostname.U:

This variable contains the eventual value of the "MYHOSTNAME" symbol, which is the name of the
host the program is going to run on. The domain is not kept with hostname, but must be gotten
from mydomain. The dot comes with mydomain, and need not be supplied by the program.

"myuname"
From Oldconfig.U:

The output of "uname -a" if available, otherwise the hostname. On Xenix, pseudo variables
assignments in the output are stripped, thank you. The whole thing is then lower-cased.

n
"n" From n.U:

This variable contains the "-n" flag if that is what causes the echo command to suppress newline.
Otherwise it is null. Correct usage is $echo $n "prompt for a question: $c".

"need_va_copy"
From need_va_copy.U:

This symbol, if defined, indicates that the system stores the variable argument list datatype,
va_list, in a format that cannot be copied by simple assignment, so that some other means must be
used when copying is required. As such systems vary in their provision (or non-provision) of
copying mechanisms, handy.h defines a platform- "independent" macro, Perl_va_copy(src, dst), to
do the job.

"netdb_hlen_type"
From netdbtype.U:

This variable holds the type used for the 2nd argument to gethostbyaddr(). Usually, this is int
or size_t or unsigned. This is only useful if you have gethostbyaddr(), naturally.

"netdb_host_type"
From netdbtype.U:

This variable holds the type used for the 1st argument to gethostbyaddr(). Usually, this is char
* or void *, possibly with or without a const prefix. This is only useful if you have
gethostbyaddr(), naturally.

"netdb_name_type"
From netdbtype.U:

This variable holds the type used for the argument to gethostbyname(). Usually, this is char *
or const char *. This is only useful if you have gethostbyname(), naturally.

"netdb_net_type"
From netdbtype.U:

This variable holds the type used for the 1st argument to getnetbyaddr(). Usually, this is int
or long. This is only useful if you have getnetbyaddr(), naturally.

"nm"
From Loc.U:

This variable is used internally by Configure to determine the full pathname (if any) of the nm
program. After Configure runs, the value is reset to a plain "nm" and is not useful.

"nm_opt"
From usenm.U:

This variable holds the options that may be necessary for nm.

"nm_so_opt"
From usenm.U:

This variable holds the options that may be necessary for nm to work on a shared library but that
can not be used on an archive library. Currently, this is only used by Linux, where nm --dynamic
is *required* to get symbols from an "ELF" library which has been stripped, but nm --dynamic is
*fatal* on an archive library. Maybe Linux should just always set usenm=false.

"nonxs_ext"
From Extensions.U:

This variable holds a list of all non-xs extensions included in the package. All of them will be
built.

"nroff"
From Loc.U:

This variable is used internally by Configure to determine the full pathname (if any) of the
nroff program. After Configure runs, the value is reset to a plain "nroff" and is not useful.

"nv_overflows_integers_at"
From perlxv.U:

This variable gives the largest integer value that NVs can hold as a constant floating point
expression. If it could not be determined, it holds the value 0.

"nv_preserves_uv_bits"
From perlxv.U:

This variable indicates how many of bits type uvtype a variable nvtype can preserve.

"nveformat"
From perlxvf.U:

This variable contains the format string used for printing a Perl "NV" using %e-ish floating
point format.

"nvEUformat"
From perlxvf.U:

This variable contains the format string used for printing a Perl "NV" using %E-ish floating
point format.

"nvfformat"
From perlxvf.U:

This variable confains the format string used for printing a Perl "NV" using %f-ish floating
point format.

"nvFUformat"
From perlxvf.U:

This variable confains the format string used for printing a Perl "NV" using %F-ish floating
point format.

"nvgformat"
From perlxvf.U:

This variable contains the format string used for printing a Perl "NV" using %g-ish floating
point format.

"nvGUformat"
From perlxvf.U:

This variable contains the format string used for printing a Perl "NV" using %G-ish floating
point format.

"nvsize"
From perlxv.U:

This variable is the size of an "NV" in bytes.

"nvtype"
From perlxv.U:

This variable contains the C type used for Perl's "NV".

o
"o_nonblock"
From nblock_io.U:

This variable bears the symbol value to be used during open() or fcntl() to turn on non-blocking
I/O for a file descriptor. If you wish to switch between blocking and non-blocking, you may try
ioctl("FIOSNBIO") instead, but that is only supported by some devices.

"obj_ext"
From Unix.U:

This is an old synonym for _o.

"old_pthread_create_joinable"
From d_pthrattrj.U:

This variable defines the constant to use for creating joinable (aka undetached) pthreads.
Unused if pthread.h defines "PTHREAD_CREATE_JOINABLE". If used, possible values are
"PTHREAD_CREATE_UNDETACHED" and "__UNDETACHED".

"optimize"
From ccflags.U:

This variable contains any optimizer/debugger flag that should be used. It is up to the Makefile
to use it.

"orderlib"
From orderlib.U:

This variable is "true" if the components of libraries must be ordered (with `lorder $* | tsort`)
before placing them in an archive. Set to "false" if ranlib or ar can generate random libraries.

"osname"
From Oldconfig.U:

This variable contains the operating system name (e.g. sunos, solaris, hpux, etc.). It can be
useful later on for setting defaults. Any spaces are replaced with underscores. It is set to a
null string if we can't figure it out.

"osvers"
From Oldconfig.U:

This variable contains the operating system version (e.g. 4.1.3, 5.2, etc.). It is primarily
used for helping select an appropriate hints file, but might be useful elsewhere for setting
defaults. It is set to '' if we can't figure it out. We try to be flexible about how much of
the version number to keep, e.g. if 4.1.1, 4.1.2, and 4.1.3 are essentially the same for this
package, hints files might just be os_4._ or os_4.1, etc., not keeping separate files for each
little release.

"otherlibdirs"
From otherlibdirs.U:

This variable contains a colon-separated set of paths for the perl binary to search for
additional library files or modules. These directories will be tacked to the end of @"INC".
Perl will automatically search below each path for version- and architecture-specific
directories. See inc_version_list for more details. A value of " " means "none" and is used to
preserve this value for the next run through Configure.

p
"package"
From package.U:

This variable contains the name of the package being constructed. It is primarily intended for
the use of later Configure units.

"pager"
From pager.U:

This variable contains the name of the preferred pager on the system. Usual values are (the full
pathnames of) more, less, pg, or cat.

"passcat"
From nis.U:

This variable contains a command that produces the text of the /etc/passwd file. This is
normally "cat /etc/passwd", but can be "ypcat passwd" when "NIS" is used. On some systems, such
as os390, there may be no equivalent command, in which case this variable is unset.

"patchlevel"
From patchlevel.U:

The patchlevel level of this package. The value of patchlevel comes from the patchlevel.h file.
In a version number such as 5.6.1, this is the 6. In patchlevel.h, this is referred to as
"PERL_VERSION".

"path_sep"
From Unix.U:

This is an old synonym for p_ in Head.U, the character used to separate elements in the command
shell search "PATH".

"perl"
From Loc.U:

This variable is used internally by Configure to determine the full pathname (if any) of the perl
program. After Configure runs, the value is reset to a plain "perl" and is not useful.

"perl5"
From perl5.U:

This variable contains the full path (if any) to a previously installed perl5.__5 or later
suitable for running the script to determine inc_version_list.

P
"PERL_API_REVISION"
From patchlevel.h:

This number describes the earliest compatible "PERL_REVISION" of Perl ("compatibility" here being
defined as sufficient binary/"API" compatibility to run "XS" code built with the older version).
Normally this does not change across maintenance releases. Please read the comment in
patchlevel.h.

"PERL_API_SUBVERSION"
From patchlevel.h:

This number describes the earliest compatible "PERL_SUBVERSION" of Perl ("compatibility" here
being defined as sufficient binary/"API" compatibility to run "XS" code built with the older
version). Normally this does not change across maintenance releases. Please read the comment in
patchlevel.h.

"PERL_API_VERSION"
From patchlevel.h:

This number describes the earliest compatible "PERL_VERSION" of Perl ("compatibility" here being
defined as sufficient binary/"API" compatibility to run "XS" code built with the older version).
Normally this does not change across maintenance releases. Please read the comment in
patchlevel.h.

"PERL_CONFIG_SH"
From Oldsyms.U:

This is set to "true" in config.sh so that a shell script sourcing config.sh can tell if it has
been sourced already.

"PERL_PATCHLEVEL"
From Oldsyms.U:

This symbol reflects the patchlevel, if available. Will usually come from the .patch file, which
is available when the perl source tree was fetched with rsync.

"perl_patchlevel"
From patchlevel.U:

This is the Perl patch level, a numeric change identifier, as defined by whichever source code
maintenance system is used to maintain the patches; currently Perforce. It does not correlate
with the Perl version numbers or the maintenance versus development dichotomy except by also
being increasing.

"PERL_REVISION"
From Oldsyms.U:

In a Perl version number such as 5.6.2, this is the 5. This value is manually set in
patchlevel.h

"perl_static_inline"
From d_static_inline.U:

This variable defines the "PERL_STATIC_INLINE" symbol to the best-guess incantation to use for
static inline functions. Possibilities include static inline (c99) static __inline__
(gcc -ansi) static __inline ("MSVC") static _inline (older "MSVC") static
(c89 compilers)

"PERL_SUBVERSION"
From Oldsyms.U:

In a Perl version number such as 5.6.2, this is the 2. Values greater than 50 represent
potentially unstable development subversions. This value is manually set in patchlevel.h

"PERL_VERSION"
From Oldsyms.U:

In a Perl version number such as 5.6.2, this is the 6. This value is manually set in
patchlevel.h

"perladmin"
From perladmin.U:

Electronic mail address of the perl5 administrator.

"perllibs"
From End.U:

The list of libraries needed by Perl only (any libraries needed by extensions only will by
dropped, if using dynamic loading).

"perlpath"
From perlpath.U:

This variable contains the eventual value of the "PERLPATH" symbol, which contains the name of
the perl interpreter to be used in shell scripts and in the "eval "exec"" idiom. This variable
is not necessarily the pathname of the file containing the perl interpreter; you must append the
executable extension (_exe) if it is not already present. Note that Perl code that runs during
the Perl build process cannot reference this variable, as Perl may not have been installed, or
even if installed, may be a different version of Perl.

"pg"
From Loc.U:

This variable is used internally by Configure to determine the full pathname (if any) of the pg
program. After Configure runs, the value is reset to a plain "pg" and is not useful.

"phostname"
From myhostname.U:

This variable contains the eventual value of the "PHOSTNAME" symbol, which is a command that can
be fed to popen() to get the host name. The program should probably not presume that the domain
is or isn't there already.

"pidtype"
From pidtype.U:

This variable defines "PIDTYPE" to be something like pid_t, int, ushort, or whatever type is used
to declare process ids in the kernel.

"plibpth"
From libpth.U:

Holds the private path used by Configure to find out the libraries. Its value is prepend to
libpth. This variable takes care of special machines, like the mips. Usually, it should be
empty.

"pmake"
From Loc.U:

This variable is defined but not used by Configure. The value is the empty string and is not
useful.

"pr"
From Loc.U:

This variable is defined but not used by Configure. The value is the empty string and is not
useful.

"prefix"
From prefix.U:

This variable holds the name of the directory below which the user will install the package.
Usually, this is /usr/local, and executables go in /usr/local/bin, library stuff in
/usr/local/lib, man pages in /usr/local/man, etc. It is only used to set defaults for things in
bin.U, mansrc.U, privlib.U, or scriptdir.U.

"prefixexp"
From prefix.U:

This variable holds the full absolute path of the directory below which the user will install the
package. Derived from prefix.

"privlib"
From privlib.U:

This variable contains the eventual value of the "PRIVLIB" symbol, which is the name of the
private library for this package. It may have a ~ on the front. It is up to the makefile to
eventually create this directory while performing installation (with ~ substitution).

"privlibexp"
From privlib.U:

This variable is the ~name expanded version of privlib, so that you may use it directly in
Makefiles or shell scripts.

"procselfexe"
From d_procselfexe.U:

If d_procselfexe is defined, $procselfexe is the filename of the symbolic link pointing to the
absolute pathname of the executing program.

"prototype"
From prototype.U:

This variable holds the eventual value of "CAN_PROTOTYPE", which indicates the C compiler can
handle funciton prototypes.

"ptrsize"
From ptrsize.U:

This variable contains the value of the "PTRSIZE" symbol, which indicates to the C program how
many bytes there are in a pointer.

q
"quadkind"
From quadtype.U:

This variable, if defined, encodes the type of a quad: 1 = int, 2 = long, 3 = long long, 4 =
int64_t.

"quadtype"
From quadtype.U:

This variable defines Quad_t to be something like long, int, long long, int64_t, or whatever type
is used for 64-bit integers.

r
"randbits"
From randfunc.U:

Indicates how many bits are produced by the function used to generate normalized random numbers.

"randfunc"
From randfunc.U:

Indicates the name of the random number function to use. Values include drand48, random, and
rand. In C programs, the "Drand01" macro is defined to generate uniformly distributed random
numbers over the range [0., 1.[ (see drand01 and nrand).

"random_r_proto"
From d_random_r.U:

This variable encodes the prototype of random_r. It is zero if d_random_r is undef, and one of
the "REENTRANT_PROTO_T_ABC" macros of reentr.h if d_random_r is defined.

"randseedtype"
From randfunc.U:

Indicates the type of the argument of the seedfunc.

"ranlib"
From orderlib.U:

This variable is set to the pathname of the ranlib program, if it is needed to generate random
libraries. Set to ":" if ar can generate random libraries or if random libraries are not
supported

"rd_nodata"
From nblock_io.U:

This variable holds the return code from read() when no data is present. It should be -1, but
some systems return 0 when "O_NDELAY" is used, which is a shame because you cannot make the
difference between no data and an EOF.. Sigh!

"readdir64_r_proto"
From d_readdir64_r.U:

This variable encodes the prototype of readdir64_r. It is zero if d_readdir64_r is undef, and
one of the "REENTRANT_PROTO_T_ABC" macros of reentr.h if d_readdir64_r is defined.

"readdir_r_proto"
From d_readdir_r.U:

This variable encodes the prototype of readdir_r. It is zero if d_readdir_r is undef, and one of
the "REENTRANT_PROTO_T_ABC" macros of reentr.h if d_readdir_r is defined.

"revision"
From patchlevel.U:

The value of revision comes from the patchlevel.h file. In a version number such as 5.6.1, this
is the 5. In patchlevel.h, this is referred to as "PERL_REVISION".

"rm"
From Loc.U:

This variable is used internally by Configure to determine the full pathname (if any) of the rm
program. After Configure runs, the value is reset to a plain "rm" and is not useful.

"rm_try"
From Unix.U:

This is a cleanup variable for try test programs. Internal Configure use only.

"rmail"
From Loc.U:

This variable is defined but not used by Configure. The value is the empty string and is not
useful.

"run"
From Cross.U:

This variable contains the command used by Configure to copy and execute a cross-compiled
executable in the target host. Useful and available only during Perl build. Empty string '' if
not cross-compiling.

"runnm"
From usenm.U:

This variable contains "true" or "false" depending whether the nm extraction should be performed
or not, according to the value of usenm and the flags on the Configure command line.

s
"sched_yield"
From d_pthread_y.U:

This variable defines the way to yield the execution of the current thread.

"scriptdir"
From scriptdir.U:

This variable holds the name of the directory in which the user wants to put publicly scripts for
the package in question. It is either the same directory as for binaries, or a special one that
can be mounted across different architectures, like /usr/share. Programs must be prepared to deal
with ~name expansion.

"scriptdirexp"
From scriptdir.U:

This variable is the same as scriptdir, but is filename expanded at configuration time, for
programs not wanting to bother with it.

"sed"
From Loc.U:

This variable is used internally by Configure to determine the full pathname (if any) of the sed
program. After Configure runs, the value is reset to a plain "sed" and is not useful.

"seedfunc"
From randfunc.U:

Indicates the random number generating seed function. Values include srand48, srandom, and
srand.

"selectminbits"
From selectminbits.U:

This variable holds the minimum number of bits operated by select. That is, if you do select(n,
...), how many bits at least will be cleared in the masks if some activity is detected. Usually
this is either n or 32*ceil(n/32), especially many little-endians do the latter. This is only
useful if you have select(), naturally.

"selecttype"
From selecttype.U:

This variable holds the type used for the 2nd, 3rd, and 4th arguments to select. Usually, this
is "fd_set *", if "HAS_FD_SET" is defined, and "int *" otherwise. This is only useful if you
have select(), naturally.

"sendmail"
From Loc.U:

This variable is defined but not used by Configure. The value is the empty string and is not
useful.

"setgrent_r_proto"
From d_setgrent_r.U:

This variable encodes the prototype of setgrent_r. It is zero if d_setgrent_r is undef, and one
of the "REENTRANT_PROTO_T_ABC" macros of reentr.h if d_setgrent_r is defined.

"sethostent_r_proto"
From d_sethostent_r.U:

This variable encodes the prototype of sethostent_r. It is zero if d_sethostent_r is undef, and
one of the "REENTRANT_PROTO_T_ABC" macros of reentr.h if d_sethostent_r is defined.

"setlocale_r_proto"
From d_setlocale_r.U:

This variable encodes the prototype of setlocale_r. It is zero if d_setlocale_r is undef, and
one of the "REENTRANT_PROTO_T_ABC" macros of reentr.h if d_setlocale_r is defined.

"setnetent_r_proto"
From d_setnetent_r.U:

This variable encodes the prototype of setnetent_r. It is zero if d_setnetent_r is undef, and
one of the "REENTRANT_PROTO_T_ABC" macros of reentr.h if d_setnetent_r is defined.

"setprotoent_r_proto"
From d_setprotoent_r.U:

This variable encodes the prototype of setprotoent_r. It is zero if d_setprotoent_r is undef,
and one of the "REENTRANT_PROTO_T_ABC" macros of reentr.h if d_setprotoent_r is defined.

"setpwent_r_proto"
From d_setpwent_r.U:

This variable encodes the prototype of setpwent_r. It is zero if d_setpwent_r is undef, and one
of the "REENTRANT_PROTO_T_ABC" macros of reentr.h if d_setpwent_r is defined.

"setservent_r_proto"
From d_setservent_r.U:

This variable encodes the prototype of setservent_r. It is zero if d_setservent_r is undef, and
one of the "REENTRANT_PROTO_T_ABC" macros of reentr.h if d_setservent_r is defined.

"sGMTIME_max"
From time_size.U:

This variable defines the maximum value of the time_t offset that the system function gmtime ()
accepts

"sGMTIME_min"
From time_size.U:

This variable defines the minimum value of the time_t offset that the system function gmtime ()
accepts

"sh"
From sh.U:

This variable contains the full pathname of the shell used on this system to execute Bourne shell
scripts. Usually, this will be /bin/sh, though it's possible that some systems will have
/bin/ksh, /bin/pdksh, /bin/ash, /bin/bash, or even something such as D:/bin/sh.exe. This unit
comes before Options.U, so you can't set sh with a "-D" option, though you can override this (and
startsh) with "-O -Dsh=/bin/whatever -Dstartsh=whatever"

"shar"
From Loc.U:

This variable is defined but not used by Configure. The value is the empty string and is not
useful.

"sharpbang"
From spitshell.U:

This variable contains the string #! if this system supports that construct.

"shmattype"
From d_shmat.U:

This symbol contains the type of pointer returned by shmat(). It can be "void *" or "char *".

"shortsize"
From intsize.U:

This variable contains the value of the "SHORTSIZE" symbol which indicates to the C program how
many bytes there are in a short.

"shrpenv"
From libperl.U:

If the user builds a shared libperl.so, then we need to tell the "perl" executable where it will
be able to find the installed libperl.so. One way to do this on some systems is to set the
environment variable "LD_RUN_PATH" to the directory that will be the final location of the shared
libperl.so. The makefile can use this with something like $shrpenv $("CC") -o perl perlmain.o
$libperl $libs Typical values are shrpenv="env "LD_RUN_PATH"=$archlibexp/"CORE"" or shrpenv=''
See the main perl Makefile.SH for actual working usage. Alternatively, we might be able to use a
command line option such as -R $archlibexp/"CORE" (Solaris) or -Wl,-rpath $archlibexp/"CORE"
(Linux).

"shsharp"
From spitshell.U:

This variable tells further Configure units whether your sh can handle # comments.

"sig_count"
From sig_name.U:

This variable holds a number larger than the largest valid signal number. This is usually the
same as the "NSIG" macro.

"sig_name"
From sig_name.U:

This variable holds the signal names, space separated. The leading "SIG" in signal name is
removed. A "ZERO" is prepended to the list. This is currently not used, sig_name_init is used
instead.

"sig_name_init"
From sig_name.U:

This variable holds the signal names, enclosed in double quotes and separated by commas, suitable
for use in the "SIG_NAME" definition below. A "ZERO" is prepended to the list, and the list is
terminated with a plain 0. The leading "SIG" in signal names is removed. See sig_num.

"sig_num"
From sig_name.U:

This variable holds the signal numbers, space separated. A "ZERO" is prepended to the list
(corresponding to the fake "SIGZERO"). Those numbers correspond to the value of the signal
listed in the same place within the sig_name list. This is currently not used, sig_num_init is
used instead.

"sig_num_init"
From sig_name.U:

This variable holds the signal numbers, enclosed in double quotes and separated by commas,
suitable for use in the "SIG_NUM" definition below. A "ZERO" is prepended to the list, and the
list is terminated with a plain 0.

"sig_size"
From sig_name.U:

This variable contains the number of elements of the sig_name and sig_num arrays.

"signal_t"
From d_voidsig.U:

This variable holds the type of the signal handler (void or int).

"sitearch"
From sitearch.U:

This variable contains the eventual value of the "SITEARCH" symbol, which is the name of the
private library for this package. It may have a ~ on the front. It is up to the makefile to
eventually create this directory while performing installation (with ~ substitution). The
standard distribution will put nothing in this directory. After perl has been installed, users
may install their own local architecture-dependent modules in this directory with MakeMaker
Makefile.PL or equivalent. See "INSTALL" for details.

"sitearchexp"
From sitearch.U:

This variable is the ~name expanded version of sitearch, so that you may use it directly in
Makefiles or shell scripts.

"sitebin"
From sitebin.U:

This variable holds the name of the directory in which the user wants to put add-on publicly
executable files for the package in question. It is most often a local directory such as
/usr/local/bin. Programs using this variable must be prepared to deal with ~name substitution.
The standard distribution will put nothing in this directory. After perl has been installed,
users may install their own local executables in this directory with MakeMaker Makefile.PL or
equivalent. See "INSTALL" for details.

"sitebinexp"
From sitebin.U:

This is the same as the sitebin variable, but is filename expanded at configuration time, for use
in your makefiles.

"sitehtml1dir"
From sitehtml1dir.U:

This variable contains the name of the directory in which site-specific html source pages are to
be put. It is the responsibility of the Makefile.SH to get the value of this into the proper
command. You must be prepared to do the ~name expansion yourself. The standard distribution
will put nothing in this directory. After perl has been installed, users may install their own
local html pages in this directory with MakeMaker Makefile.PL or equivalent. See "INSTALL" for
details.

"sitehtml1direxp"
From sitehtml1dir.U:

This variable is the same as the sitehtml1dir variable, but is filename expanded at configuration
time, for convenient use in makefiles.

"sitehtml3dir"
From sitehtml3dir.U:

This variable contains the name of the directory in which site-specific library html source pages
are to be put. It is the responsibility of the Makefile.SH to get the value of this into the
proper command. You must be prepared to do the ~name expansion yourself. The standard
distribution will put nothing in this directory. After perl has been installed, users may
install their own local library html pages in this directory with MakeMaker Makefile.PL or
equivalent. See "INSTALL" for details.

"sitehtml3direxp"
From sitehtml3dir.U:

This variable is the same as the sitehtml3dir variable, but is filename expanded at configuration
time, for convenient use in makefiles.

"sitelib"
From sitelib.U:

This variable contains the eventual value of the "SITELIB" symbol, which is the name of the
private library for this package. It may have a ~ on the front. It is up to the makefile to
eventually create this directory while performing installation (with ~ substitution). The
standard distribution will put nothing in this directory. After perl has been installed, users
may install their own local architecture-independent modules in this directory with MakeMaker
Makefile.PL or equivalent. See "INSTALL" for details.

"sitelib_stem"
From sitelib.U:

This variable is $sitelibexp with any trailing version-specific component removed. The elements
in inc_version_list (inc_version_list.U) can be tacked onto this variable to generate a list of
directories to search.

"sitelibexp"
From sitelib.U:

This variable is the ~name expanded version of sitelib, so that you may use it directly in
Makefiles or shell scripts.

"siteman1dir"
From siteman1dir.U:

This variable contains the name of the directory in which site-specific manual source pages are
to be put. It is the responsibility of the Makefile.SH to get the value of this into the proper
command. You must be prepared to do the ~name expansion yourself. The standard distribution
will put nothing in this directory. After perl has been installed, users may install their own
local man1 pages in this directory with MakeMaker Makefile.PL or equivalent. See "INSTALL" for
details.

"siteman1direxp"
From siteman1dir.U:

This variable is the same as the siteman1dir variable, but is filename expanded at configuration
time, for convenient use in makefiles.

"siteman3dir"
From siteman3dir.U:

This variable contains the name of the directory in which site-specific library man source pages
are to be put. It is the responsibility of the Makefile.SH to get the value of this into the
proper command. You must be prepared to do the ~name expansion yourself. The standard
distribution will put nothing in this directory. After perl has been installed, users may
install their own local man3 pages in this directory with MakeMaker Makefile.PL or equivalent.
See "INSTALL" for details.

"siteman3direxp"
From siteman3dir.U:

This variable is the same as the siteman3dir variable, but is filename expanded at configuration
time, for convenient use in makefiles.

"siteprefix"
From siteprefix.U:

This variable holds the full absolute path of the directory below which the user will install
add-on packages. See "INSTALL" for usage and examples.

"siteprefixexp"
From siteprefix.U:

This variable holds the full absolute path of the directory below which the user will install
add-on packages. Derived from siteprefix.

"sitescript"
From sitescript.U:

This variable holds the name of the directory in which the user wants to put add-on publicly
executable files for the package in question. It is most often a local directory such as
/usr/local/bin. Programs using this variable must be prepared to deal with ~name substitution.
The standard distribution will put nothing in this directory. After perl has been installed,
users may install their own local scripts in this directory with MakeMaker Makefile.PL or
equivalent. See "INSTALL" for details.

"sitescriptexp"
From sitescript.U:

This is the same as the sitescript variable, but is filename expanded at configuration time, for
use in your makefiles.

"sizesize"
From sizesize.U:

This variable contains the size of a sizetype in bytes.

"sizetype"
From sizetype.U:

This variable defines sizetype to be something like size_t, unsigned long, or whatever type is
used to declare length parameters for string functions.

"sleep"
From Loc.U:

This variable is defined but not used by Configure. The value is the empty string and is not
useful.

"sLOCALTIME_max"
From time_size.U:

This variable defines the maximum value of the time_t offset that the system function localtime
() accepts

"sLOCALTIME_min"
From time_size.U:

This variable defines the minimum value of the time_t offset that the system function localtime
() accepts

"smail"
From Loc.U:

This variable is defined but not used by Configure. The value is the empty string and is not
useful.

"so"
From so.U:

This variable holds the extension used to identify shared libraries (also known as shared
objects) on the system. Usually set to "so".

"sockethdr"
From d_socket.U:

This variable has any cpp "-I" flags needed for socket support.

"socketlib"
From d_socket.U:

This variable has the names of any libraries needed for socket support.

"socksizetype"
From socksizetype.U:

This variable holds the type used for the size argument for various socket calls like accept.
Usual values include socklen_t, size_t, and int.

"sort"
From Loc.U:

This variable is used internally by Configure to determine the full pathname (if any) of the sort
program. After Configure runs, the value is reset to a plain "sort" and is not useful.

"spackage"
From package.U:

This variable contains the name of the package being constructed, with the first letter
uppercased, i.e. suitable for starting sentences.

"spitshell"
From spitshell.U:

This variable contains the command necessary to spit out a runnable shell on this system. It is
either cat or a grep "-v" for # comments.

"sPRId64"
From quadfio.U:

This variable, if defined, contains the string used by stdio to format 64-bit decimal numbers
(format "d") for output.

"sPRIeldbl"
From longdblfio.U:

This variable, if defined, contains the string used by stdio to format long doubles (format "e")
for output.

"sPRIEUldbl"
From longdblfio.U:

This variable, if defined, contains the string used by stdio to format long doubles (format "E")
for output. The "U" in the name is to separate this from sPRIeldbl so that even case-blind
systems can see the difference.

"sPRIfldbl"
From longdblfio.U:

This variable, if defined, contains the string used by stdio to format long doubles (format "f")
for output.

"sPRIFUldbl"
From longdblfio.U:

This variable, if defined, contains the string used by stdio to format long doubles (format "F")
for output. The "U" in the name is to separate this from sPRIfldbl so that even case-blind
systems can see the difference.

"sPRIgldbl"
From longdblfio.U:

This variable, if defined, contains the string used by stdio to format long doubles (format "g")
for output.

"sPRIGUldbl"
From longdblfio.U:

This variable, if defined, contains the string used by stdio to format long doubles (format "G")
for output. The "U" in the name is to separate this from sPRIgldbl so that even case-blind
systems can see the difference.

"sPRIi64"
From quadfio.U:

This variable, if defined, contains the string used by stdio to format 64-bit decimal numbers
(format "i") for output.

"sPRIo64"
From quadfio.U:

This variable, if defined, contains the string used by stdio to format 64-bit octal numbers
(format "o") for output.

"sPRIu64"
From quadfio.U:

This variable, if defined, contains the string used by stdio to format 64-bit unsigned decimal
numbers (format "u") for output.

"sPRIx64"
From quadfio.U:

This variable, if defined, contains the string used by stdio to format 64-bit hexadecimal numbers
(format "x") for output.

"sPRIXU64"
From quadfio.U:

This variable, if defined, contains the string used by stdio to format 64-bit hExADECimAl numbers
(format "X") for output. The "U" in the name is to separate this from sPRIx64 so that even case-blind caseblind
blind systems can see the difference.

"srand48_r_proto"
From d_srand48_r.U:

This variable encodes the prototype of srand48_r. It is zero if d_srand48_r is undef, and one of
the "REENTRANT_PROTO_T_ABC" macros of reentr.h if d_srand48_r is defined.

"srandom_r_proto"
From d_srandom_r.U:

This variable encodes the prototype of srandom_r. It is zero if d_srandom_r is undef, and one of
the "REENTRANT_PROTO_T_ABC" macros of reentr.h if d_srandom_r is defined.

"src"
From src.U:

This variable holds the (possibly relative) path of the package source. It is up to the Makefile
to use this variable and set "VPATH" accordingly to find the sources remotely. Use $pkgsrc to
have an absolute path.

"sSCNfldbl"
From longdblfio.U:

This variable, if defined, contains the string used by stdio to format long doubles (format "f")
for input.

"ssizetype"
From ssizetype.U:

This variable defines ssizetype to be something like ssize_t, long or int. It is used by
functions that return a count of bytes or an error condition. It must be a signed type. We will
pick a type such that sizeof(SSize_t) == sizeof(Size_t).

"st_ino_sign"
From st_ino_def.U:

This variable contains the signedness of struct stat's st_ino. 1 for unsigned, -1 for signed.

"st_ino_size"
From st_ino_def.U:

This variable contains the size of struct stat's st_ino in bytes.

"startperl"
From startperl.U:

This variable contains the string to put on the front of a perl script to make sure (hopefully)
that it runs with perl and not some shell. Of course, that leading line must be followed by the
classical perl idiom: eval 'exec perl -S $0 ${1+$@}' if $running_under_some_shell; to guarantee
perl startup should the shell execute the script. Note that this magic incantation is not
understood by csh.

"startsh"
From startsh.U:

This variable contains the string to put on the front of a shell script to make sure (hopefully)
that it runs with sh and not some other shell.

"static_ext"
From Extensions.U:

This variable holds a list of "XS" extension files we want to link statically into the package.
It is used by Makefile.

"stdchar"
From stdchar.U:

This variable conditionally defines "STDCHAR" to be the type of char used in stdio.h. It has the
values "unsigned char" or "char".

"stdio_base"
From d_stdstdio.U:

This variable defines how, given a "FILE" pointer, fp, to access the _base field (or equivalent)
of stdio.h's "FILE" structure. This will be used to define the macro FILE_base(fp).

"stdio_bufsiz"
From d_stdstdio.U:

This variable defines how, given a "FILE" pointer, fp, to determine the number of bytes store in
the I/O buffer pointer to by the _base field (or equivalent) of stdio.h's "FILE" structure. This
will be used to define the macro FILE_bufsiz(fp).

"stdio_cnt"
From d_stdstdio.U:

This variable defines how, given a "FILE" pointer, fp, to access the _cnt field (or equivalent)
of stdio.h's "FILE" structure. This will be used to define the macro FILE_cnt(fp).

"stdio_filbuf"
From d_stdstdio.U:

This variable defines how, given a "FILE" pointer, fp, to tell stdio to refill its internal
buffers (?). This will be used to define the macro FILE_filbuf(fp).

"stdio_ptr"
From d_stdstdio.U:

This variable defines how, given a "FILE" pointer, fp, to access the _ptr field (or equivalent)
of stdio.h's "FILE" structure. This will be used to define the macro FILE_ptr(fp).

"stdio_stream_array"
From stdio_streams.U:

This variable tells the name of the array holding the stdio streams. Usual values include _iob,
__iob, and __sF.

"strerror_r_proto"
From d_strerror_r.U:

This variable encodes the prototype of strerror_r. It is zero if d_strerror_r is undef, and one
of the "REENTRANT_PROTO_T_ABC" macros of reentr.h if d_strerror_r is defined.

"strings"
From i_string.U:

This variable holds the full path of the string header that will be used. Typically
/usr/include/string.h or /usr/include/strings.h.

"submit"
From Loc.U:

This variable is defined but not used by Configure. The value is the empty string and is not
useful.

"subversion"
From patchlevel.U:

The subversion level of this package. The value of subversion comes from the patchlevel.h file.
In a version number such as 5.6.1, this is the 1. In patchlevel.h, this is referred to as
"PERL_SUBVERSION". This is unique to perl.

"sysman"
From sysman.U:

This variable holds the place where the manual is located on this system. It is not the place
where the user wants to put his manual pages. Rather it is the place where Configure may look to
find manual for unix commands (section 1 of the manual usually). See mansrc.

t
"tail"
From Loc.U:

This variable is defined but not used by Configure. The value is the empty string and is not
useful.

"tar"
From Loc.U:

This variable is defined but not used by Configure. The value is the empty string and is not
useful.

"targetarch"
From Cross.U:

If cross-compiling, this variable contains the target architecture. If not, this will be empty.

"tbl"
From Loc.U:

This variable is defined but not used by Configure. The value is the empty string and is not
useful.

"tee"
From Loc.U:

This variable is defined but not used by Configure. The value is the empty string and is not
useful.

"test"
From Loc.U:

This variable is used internally by Configure to determine the full pathname (if any) of the test
program. After Configure runs, the value is reset to a plain "test" and is not useful.

"timeincl"
From i_time.U:

This variable holds the full path of the included time header(s).

"timetype"
From d_time.U:

This variable holds the type returned by time(). It can be long, or time_t on "BSD" sites (in
which case <sys/types.h> should be included). Anyway, the type Time_t should be used.

"tmpnam_r_proto"
From d_tmpnam_r.U:

This variable encodes the prototype of tmpnam_r. It is zero if d_tmpnam_r is undef, and one of
the "REENTRANT_PROTO_T_ABC" macros of reentr.h if d_tmpnam_r is defined.

"to"
From Cross.U:

This variable contains the command used by Configure to copy to from the target host. Useful and
available only during Perl build. The string ":" if not cross-compiling.

"touch"
From Loc.U:

This variable is used internally by Configure to determine the full pathname (if any) of the
touch program. After Configure runs, the value is reset to a plain "touch" and is not useful.

"tr"
From Loc.U:

This variable is used internally by Configure to determine the full pathname (if any) of the tr
program. After Configure runs, the value is reset to a plain "tr" and is not useful.

"trnl"
From trnl.U:

This variable contains the value to be passed to the tr(1) command to transliterate a newline.
Typical values are "\012" and "\n". This is needed for "EBCDIC" systems where newline is not
necessarily "\012".

"troff"
From Loc.U:

This variable is defined but not used by Configure. The value is the empty string and is not
useful.

"ttyname_r_proto"
From d_ttyname_r.U:

This variable encodes the prototype of ttyname_r. It is zero if d_ttyname_r is undef, and one of
the "REENTRANT_PROTO_T_ABC" macros of reentr.h if d_ttyname_r is defined.

u
"u16size"
From perlxv.U:

This variable is the size of an U16 in bytes.

"u16type"
From perlxv.U:

This variable contains the C type used for Perl's U16.

"u32size"
From perlxv.U:

This variable is the size of an U32 in bytes.

"u32type"
From perlxv.U:

This variable contains the C type used for Perl's U32.

"u64size"
From perlxv.U:

This variable is the size of an U64 in bytes.

"u64type"
From perlxv.U:

This variable contains the C type used for Perl's U64.

"u8size"
From perlxv.U:

This variable is the size of an U8 in bytes.

"u8type"
From perlxv.U:

This variable contains the C type used for Perl's U8.

"uidformat"
From uidf.U:

This variable contains the format string used for printing a Uid_t.

"uidsign"
From uidsign.U:

This variable contains the signedness of a uidtype. 1 for unsigned, -1 for signed.

"uidsize"
From uidsize.U:

This variable contains the size of a uidtype in bytes.

"uidtype"
From uidtype.U:

This variable defines Uid_t to be something like uid_t, int, ushort, or whatever type is used to
declare user ids in the kernel.

"uname"
From Loc.U:

This variable is used internally by Configure to determine the full pathname (if any) of the
uname program. After Configure runs, the value is reset to a plain "uname" and is not useful.

"uniq"
From Loc.U:

This variable is used internally by Configure to determine the full pathname (if any) of the uniq
program. After Configure runs, the value is reset to a plain "uniq" and is not useful.

"uquadtype"
From quadtype.U:

This variable defines Uquad_t to be something like unsigned long, unsigned int, unsigned long
long, uint64_t, or whatever type is used for 64-bit integers.

"use5005threads"
From usethreads.U:

This variable conditionally defines the USE_5005THREADS symbol, and indicates that Perl should be
built to use the 5.005-based threading implementation. Only valid up to 5.8.x.

"use64bitall"
From use64bits.U:

This variable conditionally defines the USE_64_BIT_ALL symbol, and indicates that 64-bit integer
types should be used when available. The maximal possible 64-bitness is employed: LP64 or ILP64,
meaning that you will be able to use more than 2 gigabytes of memory. This mode is even more
binary incompatible than USE_64_BIT_INT. You may not be able to run the resulting executable in a
32-bit "CPU" at all or you may need at least to reboot your "OS" to 64-bit mode.

"use64bitint"
From use64bits.U:

This variable conditionally defines the USE_64_BIT_INT symbol, and indicates that 64-bit integer
types should be used when available. The minimal possible 64-bitness is employed, just enough to
get 64-bit integers into Perl. This may mean using for example "long longs", while your memory
may still be limited to 2 gigabytes.

"usecrosscompile"
From Cross.U:

This variable conditionally defines the "USE_CROSS_COMPILE" symbol, and indicates that Perl has
been cross-compiled.

"usedevel"
From Devel.U:

This variable indicates that Perl was configured with development features enabled. This should
not be done for production builds.

"usedl"
From dlsrc.U:

This variable indicates if the system supports dynamic loading of some sort. See also dlsrc and
dlobj.

"usedtrace"
From usedtrace.U:

This variable indicates whether we are compiling with dtrace support. See also dtrace.

"usefaststdio"
From usefaststdio.U:

This variable conditionally defines the "USE_FAST_STDIO" symbol, and indicates that Perl should
be built to use "fast stdio". Defaults to define in Perls 5.8 and earlier, to undef later.

"useithreads"
From usethreads.U:

This variable conditionally defines the "USE_ITHREADS" symbol, and indicates that Perl should be
built to use the interpreter-based threading implementation.

"usekernprocpathname"
From usekernprocpathname.U:

This variable, indicates that we can use sysctl with "KERN_PROC_PATHNAME" to get a full path for
the executable, and hence convert $^X to an absolute path.

"uselargefiles"
From uselfs.U:

This variable conditionally defines the "USE_LARGE_FILES" symbol, and indicates that large file
interfaces should be used when available.

"uselongdouble"
From uselongdbl.U:

This variable conditionally defines the "USE_LONG_DOUBLE" symbol, and indicates that long doubles
should be used when available.

"usemallocwrap"
From mallocsrc.U:

This variable contains y if we are wrapping malloc to prevent integer overflow during size
calculations.

"usemorebits"
From usemorebits.U:

This variable conditionally defines the "USE_MORE_BITS" symbol, and indicates that explicit
64-bit interfaces and long doubles should be used when available.

"usemultiplicity"
From usemultiplicity.U:

This variable conditionally defines the "MULTIPLICITY" symbol, and indicates that Perl should be
built to use multiplicity.

"usemymalloc"
From mallocsrc.U:

This variable contains y if the malloc that comes with this package is desired over the system's
version of malloc. People often include special versions of malloc for efficiency, but such
versions are often less portable. See also mallocsrc and mallocobj. If this is "y", then
-lmalloc is removed from $libs.

"usenm"
From usenm.U:

This variable contains "true" or "false" depending whether the nm extraction is wanted or not.

"usensgetexecutablepath"
From usensgetexecutablepath.U:

This symbol, if defined, indicates that we can use _NSGetExecutablePath and realpath to get a
full path for the executable, and hence convert $^X to an absolute path.

"useopcode"
From Extensions.U:

This variable holds either "true" or "false" to indicate whether the Opcode extension should be
used. The sole use for this currently is to allow an easy mechanism for users to skip the Opcode
extension from the Configure command line.

"useperlio"
From useperlio.U:

This variable conditionally defines the "USE_PERLIO" symbol, and indicates that the PerlIO
abstraction should be used throughout.

"useposix"
From Extensions.U:

This variable holds either "true" or "false" to indicate whether the "POSIX" extension should be
used. The sole use for this currently is to allow an easy mechanism for hints files to indicate
that "POSIX" will not compile on a particular system.

"usereentrant"
From usethreads.U:

This variable conditionally defines the "USE_REENTRANT_API" symbol, which indicates that the
thread code may try to use the various _r versions of library functions. This is only
potentially meaningful if usethreads is set and is very experimental, it is not even prompted
for.

"userelocatableinc"
From bin.U:

This variable is set to true to indicate that perl should relocate @"INC" entries at runtime
based on the path to the perl binary. Any @"INC" paths starting .../ are relocated relative to
the directory containing the perl binary, and a logical cleanup of the path is then made around
the join point (removing dir/../ pairs)

"usesfio"
From d_sfio.U:

This variable is set to true when the user agrees to use sfio. It is set to false when sfio is
not available or when the user explicitly requests not to use sfio. It is here primarily so that
command-line settings can override the auto-detection of d_sfio without running into a "WHOA
THERE".

"useshrplib"
From libperl.U:

This variable is set to "true" if the user wishes to build a shared libperl, and "false"
otherwise.

"usesitecustomize"
From d_sitecustomize.U:

This variable is set to true when the user requires a mechanism that allows the sysadmin to add
entries to @"INC" at runtime. This variable being set, makes perl run $sitelib/sitecustomize.pl
at startup.

"usesocks"
From usesocks.U:

This variable conditionally defines the "USE_SOCKS" symbol, and indicates that Perl should be
built to use "SOCKS".

"usethreads"
From usethreads.U:

This variable conditionally defines the "USE_THREADS" symbol, and indicates that Perl should be
built to use threads.

"usevendorprefix"
From vendorprefix.U:

This variable tells whether the vendorprefix and consequently other vendor* paths are in use.

"usevfork"
From d_vfork.U:

This variable is set to true when the user accepts to use vfork. It is set to false when no
vfork is available or when the user explicitly requests not to use vfork.

"usrinc"
From usrinc.U:

This variable holds the path of the include files, which is usually /usr/include. It is mainly
used by other Configure units.

"uuname"
From Loc.U:

This variable is defined but not used by Configure. The value is the empty string and is not
useful.

"uvoformat"
From perlxvf.U:

This variable contains the format string used for printing a Perl "UV" as an unsigned octal
integer.

"uvsize"
From perlxv.U:

This variable is the size of a "UV" in bytes.

"uvtype"
From perlxv.U:

This variable contains the C type used for Perl's "UV".

"uvuformat"
From perlxvf.U:

This variable contains the format string used for printing a Perl "UV" as an unsigned decimal
integer.

"uvxformat"
From perlxvf.U:

This variable contains the format string used for printing a Perl "UV" as an unsigned hexadecimal
integer in lowercase abcdef.

"uvXUformat"
From perlxvf.U:

This variable contains the format string used for printing a Perl "UV" as an unsigned hexadecimal
integer in uppercase "ABCDEF".

v
"vaproto"
From vaproto.U:

This variable conditionally defines "CAN_VAPROTO" on systems supporting prototype declaration of
functions with a variable number of arguments. See also prototype.

"vendorarch"
From vendorarch.U:

This variable contains the value of the "PERL_VENDORARCH" symbol. It may have a ~ on the front.
The standard distribution will put nothing in this directory. Vendors who distribute perl may
wish to place their own architecture-dependent modules and extensions in this directory with
MakeMaker Makefile.PL "INSTALLDIRS"=vendor or equivalent. See "INSTALL" for details.

"vendorarchexp"
From vendorarch.U:

This variable is the ~name expanded version of vendorarch, so that you may use it directly in
Makefiles or shell scripts.

"vendorbin"
From vendorbin.U:

This variable contains the eventual value of the "VENDORBIN" symbol. It may have a ~ on the
front. The standard distribution will put nothing in this directory. Vendors who distribute
perl may wish to place additional binaries in this directory with MakeMaker Makefile.PL
"INSTALLDIRS"=vendor or equivalent. See "INSTALL" for details.

"vendorbinexp"
From vendorbin.U:

This variable is the ~name expanded version of vendorbin, so that you may use it directly in
Makefiles or shell scripts.

"vendorhtml1dir"
From vendorhtml1dir.U:

This variable contains the name of the directory for html pages. It may have a ~ on the front.
The standard distribution will put nothing in this directory. Vendors who distribute perl may
wish to place their own html pages in this directory with MakeMaker Makefile.PL
"INSTALLDIRS"=vendor or equivalent. See "INSTALL" for details.

"vendorhtml1direxp"
From vendorhtml1dir.U:

This variable is the ~name expanded version of vendorhtml1dir, so that you may use it directly in
Makefiles or shell scripts.

"vendorhtml3dir"
From vendorhtml3dir.U:

This variable contains the name of the directory for html library pages. It may have a ~ on the
front. The standard distribution will put nothing in this directory. Vendors who distribute
perl may wish to place their own html pages for modules and extensions in this directory with
MakeMaker Makefile.PL "INSTALLDIRS"=vendor or equivalent. See "INSTALL" for details.

"vendorhtml3direxp"
From vendorhtml3dir.U:

This variable is the ~name expanded version of vendorhtml3dir, so that you may use it directly in
Makefiles or shell scripts.

"vendorlib"
From vendorlib.U:

This variable contains the eventual value of the "VENDORLIB" symbol, which is the name of the
private library for this package. The standard distribution will put nothing in this directory.
Vendors who distribute perl may wish to place their own modules in this directory with MakeMaker
Makefile.PL "INSTALLDIRS"=vendor or equivalent. See "INSTALL" for details.

"vendorlib_stem"
From vendorlib.U:

This variable is $vendorlibexp with any trailing version-specific component removed. The
elements in inc_version_list (inc_version_list.U) can be tacked onto this variable to generate a
list of directories to search.

"vendorlibexp"
From vendorlib.U:

This variable is the ~name expanded version of vendorlib, so that you may use it directly in
Makefiles or shell scripts.

"vendorman1dir"
From vendorman1dir.U:

This variable contains the name of the directory for man1 pages. It may have a ~ on the front.
The standard distribution will put nothing in this directory. Vendors who distribute perl may
wish to place their own man1 pages in this directory with MakeMaker Makefile.PL
"INSTALLDIRS"=vendor or equivalent. See "INSTALL" for details.

"vendorman1direxp"
From vendorman1dir.U:

This variable is the ~name expanded version of vendorman1dir, so that you may use it directly in
Makefiles or shell scripts.

"vendorman3dir"
From vendorman3dir.U:

This variable contains the name of the directory for man3 pages. It may have a ~ on the front.
The standard distribution will put nothing in this directory. Vendors who distribute perl may
wish to place their own man3 pages in this directory with MakeMaker Makefile.PL
"INSTALLDIRS"=vendor or equivalent. See "INSTALL" for details.

"vendorman3direxp"
From vendorman3dir.U:

This variable is the ~name expanded version of vendorman3dir, so that you may use it directly in
Makefiles or shell scripts.

"vendorprefix"
From vendorprefix.U:

This variable holds the full absolute path of the directory below which the vendor will install
add-on packages. See "INSTALL" for usage and examples.

"vendorprefixexp"
From vendorprefix.U:

This variable holds the full absolute path of the directory below which the vendor will install
add-on packages. Derived from vendorprefix.

"vendorscript"
From vendorscript.U:

This variable contains the eventual value of the "VENDORSCRIPT" symbol. It may have a ~ on the
front. The standard distribution will put nothing in this directory. Vendors who distribute
perl may wish to place additional executable scripts in this directory with MakeMaker Makefile.PL
"INSTALLDIRS"=vendor or equivalent. See "INSTALL" for details.

"vendorscriptexp"
From vendorscript.U:

This variable is the ~name expanded version of vendorscript, so that you may use it directly in
Makefiles or shell scripts.

"version"
From patchlevel.U:

The full version number of this package, such as 5.6.1 (or 5_6_1). This combines revision,
patchlevel, and subversion to get the full version number, including any possible subversions.
This is suitable for use as a directory name, and hence is filesystem dependent.

"version_patchlevel_string"
From patchlevel.U:

This is a string combining version, subversion and perl_patchlevel (if perl_patchlevel is non-zero). nonzero).
zero). It is typically something like 'version 7 subversion 1' or 'version 7 subversion 1
patchlevel 11224' It is computed here to avoid duplication of code in myconfig.SH and
lib/Config.pm.

"versiononly"
From versiononly.U:

If set, this symbol indicates that only the version-specific components of a perl installation
should be installed. This may be useful for making a test installation of a new version without
disturbing the existing installation. Setting versiononly is equivalent to setting installperl's
-v option. In particular, the non-versioned scripts and programs such as a2p, c2ph, h2xs, pod2*,
and perldoc are not installed (see "INSTALL" for a more complete list). Nor are the man pages
installed. Usually, this is undef.

"vi"
From Loc.U:

This variable is defined but not used by Configure. The value is the empty string and is not
useful.

"voidflags"
From voidflags.U:

This variable contains the eventual value of the "VOIDFLAGS" symbol, which indicates how much
support of the void type is given by this compiler. See "VOIDFLAGS" for more info.

x
"xlibpth"
From libpth.U:

This variable holds extra path (space-separated) used to find libraries on this platform, for
example "CPU"-specific libraries (on multi-"CPU" platforms) may be listed here.

y
"yacc"
From yacc.U:

This variable holds the name of the compiler compiler we want to use in the Makefile. It can be
yacc, byacc, or bison -y.

"yaccflags"
From yacc.U:

This variable contains any additional yacc flags desired by the user. It is up to the Makefile
to use this.

z
"zcat"
From Loc.U:

This variable is defined but not used by Configure. The value is the empty string and is not
useful.

"zip"
From Loc.U:

This variable is used internally by Configure to determine the full pathname (if any) of the zip
program. After Configure runs, the value is reset to a plain "zip" and is not useful.

GIT DATA
Information on the git commit from which the current perl binary was compiled can be found in the
variable $Config::Git_Data. The variable is a structured string that looks something like this:

git_commit_id='ea0c2dbd5f5ac6845ecc7ec6696415bf8e27bd52'
git_describe='GitLive-blead-1076-gea0c2db'
git_branch='smartmatch'
git_uncommitted_changes=''
git_commit_id_title='Commit id:'
git_commit_date='2009-05-09 17:47:31 +0200'

Its format is not guaranteed not to change over time.

NOTE
This module contains a good example of how to use tie to implement a cache and an example of how to
make a tied variable readonly to those outside of it.

perl v5.16.2 2013-08-25 Config(3pm)

Сообщение о проблемах

Способ сообщить о проблеме с этой страницей руководства зависит от типа проблемы:

Ошибки содержания: Ошибки отчета в содержании этой документации к проекту Perl. (См. perlbug (1) для инструкций представления.)
Отчеты об ошибках: Сообщите об ошибках в функциональности описанного инструмента или API к Apple через Генератор отчетов Ошибки и к проекту Perl, использующему perlbug (1).
Форматирование проблем: Отчет, форматирующий ошибки в интерактивной версии этих страниц со ссылками на отзыв ниже.