Страницы справочника OS X

Эта страница руководства для  версии 10.9 Mac OS X

Читать страницы руководства

Getopt::Long(3pm)                     Perl Programmers Reference Guide                     Getopt::Long(3pm)



NAME
       Getopt::Long - Extended processing of command line options

SYNOPSIS
         use Getopt::Long;
         my $data   = "file.dat";
         my $length = 24;
         my $verbose;
         $result = GetOptions ("length=i" => \$length,    # numeric
                               "file=s"   => \$data,      # string
                               "verbose"  => \$verbose);  # flag

DESCRIPTION
       The Getopt::Long module implements an extended getopt function called GetOptions(). This function
       adheres to the POSIX syntax for command line options, with GNU extensions. In general, this means
       that options have long names instead of single letters, and are introduced with a double dash "--".
       Support for bundling of command line options, as was the case with the more traditional single-letter
       approach, is provided but not enabled by default.

Command Line Options, an Introduction
       Command line operated programs traditionally take their arguments from the command line, for example
       filenames or other information that the program needs to know. Besides arguments, these programs
       often take command line options as well. Options are not necessary for the program to work, hence the
       name 'option', but are used to modify its default behaviour. For example, a program could do its job
       quietly, but with a suitable option it could provide verbose information about what it did.

       Command line options come in several flavours. Historically, they are preceded by a single dash "-",
       and consist of a single letter.

           -l -a -c

       Usually, these single-character options can be bundled:

           -lac

       Options can have values, the value is placed after the option character. Sometimes with whitespace in
       between, sometimes not:

           -s 24 -s24

       Due to the very cryptic nature of these options, another style was developed that used long names. So
       instead of a cryptic "-l" one could use the more descriptive "--long". To distinguish between a
       bundle of single-character options and a long one, two dashes are used to precede the option name.
       Early implementations of long options used a plus "+" instead. Also, option values could be specified
       either like

           --size=24

       or

           --size 24

       The "+" form is now obsolete and strongly deprecated.

Getting Started with Getopt::Long
       Getopt::Long is the Perl5 successor of "newgetopt.pl". This was the first Perl module that provided
       support for handling the new style of command line options, hence the name Getopt::Long. This module
       also supports single-character options and bundling. Single character options may be any alphabetic
       character, a question mark, and a dash.  Long options may consist of a series of letters, digits, and
       dashes.  Although this is currently not enforced by Getopt::Long, multiple consecutive dashes are not
       allowed, and the option name must not end with a dash.

       To use Getopt::Long from a Perl program, you must include the following line in your Perl program:

           use Getopt::Long;

       This will load the core of the Getopt::Long module and prepare your program for using it. Most of the
       actual Getopt::Long code is not loaded until you really call one of its functions.

       In the default configuration, options names may be abbreviated to uniqueness, case does not matter,
       and a single dash is sufficient, even for long option names. Also, options may be placed between non-option nonoption
       option arguments. See "Configuring Getopt::Long" for more details on how to configure Getopt::Long.

   Simple options
       The most simple options are the ones that take no values. Their mere presence on the command line
       enables the option. Popular examples are:

           --all --verbose --quiet --debug

       Handling simple options is straightforward:

           my $verbose = '';   # option variable with default value (false)
           my $all = '';       # option variable with default value (false)
           GetOptions ('verbose' => \$verbose, 'all' => \$all);

       The call to GetOptions() parses the command line arguments that are present in @ARGV and sets the
       option variable to the value 1 if the option did occur on the command line. Otherwise, the option
       variable is not touched. Setting the option value to true is often called enabling the option.

       The option name as specified to the GetOptions() function is called the option specification. Later
       we'll see that this specification can contain more than just the option name. The reference to the
       variable is called the option destination.

       GetOptions() will return a true value if the command line could be processed successfully. Otherwise,
       it will write error messages to STDERR, and return a false result.

   A little bit less simple options
       Getopt::Long supports two useful variants of simple options: negatable options and incremental
       options.

       A negatable option is specified with an exclamation mark "!" after the option name:

           my $verbose = '';   # option variable with default value (false)
           GetOptions ('verbose!' => \$verbose);

       Now, using "--verbose" on the command line will enable $verbose, as expected. But it is also allowed
       to use "--noverbose", which will disable $verbose by setting its value to 0. Using a suitable default
       value, the program can find out whether $verbose is false by default, or disabled by using
       "--noverbose".

       An incremental option is specified with a plus "+" after the option name:

           my $verbose = '';   # option variable with default value (false)
           GetOptions ('verbose+' => \$verbose);

       Using "--verbose" on the command line will increment the value of $verbose. This way the program can
       keep track of how many times the option occurred on the command line. For example, each occurrence of
       "--verbose" could increase the verbosity level of the program.

   Mixing command line option with other arguments
       Usually programs take command line options as well as other arguments, for example, file names. It is
       good practice to always specify the options first, and the other arguments last. Getopt::Long will,
       however, allow the options and arguments to be mixed and 'filter out' all the options before passing
       the rest of the arguments to the program. To stop Getopt::Long from processing further arguments,
       insert a double dash "--" on the command line:

           --size 24 -- --all

       In this example, "--all" will not be treated as an option, but passed to the program unharmed, in
       @ARGV.

   Options with values
       For options that take values it must be specified whether the option value is required or not, and
       what kind of value the option expects.

       Three kinds of values are supported: integer numbers, floating point numbers, and strings.

       If the option value is required, Getopt::Long will take the command line argument that follows the
       option and assign this to the option variable. If, however, the option value is specified as
       optional, this will only be done if that value does not look like a valid command line option itself.

           my $tag = '';       # option variable with default value
           GetOptions ('tag=s' => \$tag);

       In the option specification, the option name is followed by an equals sign "=" and the letter "s".
       The equals sign indicates that this option requires a value. The letter "s" indicates that this value
       is an arbitrary string. Other possible value types are "i" for integer values, and "f" for floating
       point values. Using a colon ":" instead of the equals sign indicates that the option value is
       optional. In this case, if no suitable value is supplied, string valued options get an empty string
       '' assigned, while numeric options are set to 0.

   Options with multiple values
       Options sometimes take several values. For example, a program could use multiple directories to
       search for library files:

           --library lib/stdlib --library lib/extlib

       To accomplish this behaviour, simply specify an array reference as the destination for the option:

           GetOptions ("library=s" => \@libfiles);

       Alternatively, you can specify that the option can have multiple values by adding a "@", and pass a
       scalar reference as the destination:

           GetOptions ("library=s@" => \$libfiles);

       Used with the example above, @libfiles (or @$libfiles) would contain two strings upon completion:
       "lib/srdlib" and "lib/extlib", in that order. It is also possible to specify that only integer or
       floating point numbers are acceptable values.

       Often it is useful to allow comma-separated lists of values as well as multiple occurrences of the
       options. This is easy using Perl's split() and join() operators:

           GetOptions ("library=s" => \@libfiles);
           @libfiles = split(/,/,join(',',@libfiles));

       Of course, it is important to choose the right separator string for each purpose.

       Warning: What follows is an experimental feature.

       Options can take multiple values at once, for example

           --coordinates 52.2 16.4 --rgbcolor 255 255 149

       This can be accomplished by adding a repeat specifier to the option specification. Repeat specifiers
       are very similar to the "{...}" repeat specifiers that can be used with regular expression patterns.
       For example, the above command line would be handled as follows:

           GetOptions('coordinates=f{2}' => \@coor, 'rgbcolor=i{3}' => \@color);

       The destination for the option must be an array or array reference.

       It is also possible to specify the minimal and maximal number of arguments an option takes.
       "foo=s{2,4}" indicates an option that takes at least two and at most 4 arguments. "foo=s{,}"
       indicates one or more values; "foo:s{,}" indicates zero or more option values.

   Options with hash values
       If the option destination is a reference to a hash, the option will take, as value, strings of the
       form key"="value. The value will be stored with the specified key in the hash.

           GetOptions ("define=s" => \%defines);

       Alternatively you can use:

           GetOptions ("define=s%" => \$defines);

       When used with command line options:

           --define os=linux --define vendor=redhat

       the hash %defines (or %$defines) will contain two keys, "os" with value "linux" and "vendor" with
       value "redhat". It is also possible to specify that only integer or floating point numbers are
       acceptable values. The keys are always taken to be strings.

   User-defined subroutines to handle options
       Ultimate control over what should be done when (actually: each time) an option is encountered on the
       command line can be achieved by designating a reference to a subroutine (or an anonymous subroutine)
       as the option destination. When GetOptions() encounters the option, it will call the subroutine with
       two or three arguments. The first argument is the name of the option. (Actually, it is an object that
       stringifies to the name of the option.) For a scalar or array destination, the second argument is the
       value to be stored. For a hash destination, the second arguments is the key to the hash, and the
       third argument the value to be stored. It is up to the subroutine to store the value, or do whatever
       it thinks is appropriate.

       A trivial application of this mechanism is to implement options that are related to each other. For
       example:

           my $verbose = '';   # option variable with default value (false)
           GetOptions ('verbose' => \$verbose,
                       'quiet'   => sub { $verbose = 0 });

       Here "--verbose" and "--quiet" control the same variable $verbose, but with opposite values.

       If the subroutine needs to signal an error, it should call die() with the desired error message as
       its argument. GetOptions() will catch the die(), issue the error message, and record that an error
       result must be returned upon completion.

       If the text of the error message starts with an exclamation mark "!"  it is interpreted specially by
       GetOptions(). There is currently one special command implemented: "die("!FINISH")" will cause
       GetOptions() to stop processing options, as if it encountered a double dash "--".

       In version 2.37 the first argument to the callback function was changed from string to object. This
       was done to make room for extensions and more detailed control. The object stringifies to the option
       name so this change should not introduce compatibility problems.

   Options with multiple names
       Often it is user friendly to supply alternate mnemonic names for options. For example "--height"
       could be an alternate name for "--length". Alternate names can be included in the option
       specification, separated by vertical bar "|" characters. To implement the above example:

           GetOptions ('length|height=f' => \$length);

       The first name is called the primary name, the other names are called aliases. When using a hash to
       store options, the key will always be the primary name.

       Multiple alternate names are possible.

   Case and abbreviations
       Without additional configuration, GetOptions() will ignore the case of option names, and allow the
       options to be abbreviated to uniqueness.

           GetOptions ('length|height=f' => \$length, "head" => \$head);

       This call will allow "--l" and "--L" for the length option, but requires a least "--hea" and "--hei"
       for the head and height options.

   Summary of Option Specifications
       Each option specifier consists of two parts: the name specification and the argument specification.

       The name specification contains the name of the option, optionally followed by a list of alternative
       names separated by vertical bar characters.

           length            option name is "length"
           length|size|l     name is "length", aliases are "size" and "l"

       The argument specification is optional. If omitted, the option is considered boolean, a value of 1
       will be assigned when the option is used on the command line.

       The argument specification can be

       !   The option does not take an argument and may be negated by prefixing it with "no" or "no-". E.g.
           "foo!" will allow "--foo" (a value of 1 will be assigned) as well as "--nofoo" and "--no-foo" (a
           value of 0 will be assigned). If the option has aliases, this applies to the aliases as well.

           Using negation on a single letter option when bundling is in effect is pointless and will result
           in a warning.

       +   The option does not take an argument and will be incremented by 1 every time it appears on the
           command line. E.g. "more+", when used with "--more --more --more", will increment the value three
           times, resulting in a value of 3 (provided it was 0 or undefined at first).

           The "+" specifier is ignored if the option destination is not a scalar.

       = type [ desttype ] [ repeat ]
           The option requires an argument of the given type. Supported types are:

           s   String. An arbitrary sequence of characters. It is valid for the argument to start with "-"
               or "--".

           i   Integer. An optional leading plus or minus sign, followed by a sequence of digits.

           o   Extended integer, Perl style. This can be either an optional leading plus or minus sign,
               followed by a sequence of digits, or an octal string (a zero, optionally followed by '0',
               '1', .. '7'), or a hexadecimal string ("0x" followed by '0' .. '9', 'a' .. 'f', case
               insensitive), or a binary string ("0b" followed by a series of '0' and '1').

           f   Real number. For example 3.14, "-6.23E24" and so on.

           The desttype can be "@" or "%" to specify that the option is list or a hash valued. This is only
           needed when the destination for the option value is not otherwise specified. It should be omitted
           when not needed.

           The repeat specifies the number of values this option takes per occurrence on the command line.
           It has the format "{" [ min ] [ "," [ max ] ] "}".

           min denotes the minimal number of arguments. It defaults to 1 for options with "=" and to 0 for
           options with ":", see below. Note that min overrules the "=" / ":" semantics.

           max denotes the maximum number of arguments. It must be at least min. If max is omitted, but the
           comma is not, there is no upper bound to the number of argument values taken.

       : type [ desttype ]
           Like "=", but designates the argument as optional.  If omitted, an empty string will be assigned
           to string values options, and the value zero to numeric options.

           Note that if a string argument starts with "-" or "--", it will be considered an option on
           itself.

       : number [ desttype ]
           Like ":i", but if the value is omitted, the number will be assigned.

       : + [ desttype ]
           Like ":i", but if the value is omitted, the current value for the option will be incremented.

Advanced Possibilities
   Object oriented interface
       Getopt::Long can be used in an object oriented way as well:

           use Getopt::Long;
           $p = new Getopt::Long::Parser;
           $p->configure(...configuration options...);
           if ($p->getoptions(...options descriptions...)) ...

       Configuration options can be passed to the constructor:

           $p = new Getopt::Long::Parser
                    config => [...configuration options...];

   Thread Safety
       Getopt::Long is thread safe when using ithreads as of Perl 5.8.  It is not thread safe when using the
       older (experimental and now obsolete) threads implementation that was added to Perl 5.005.

   Documentation and help texts
       Getopt::Long encourages the use of Pod::Usage to produce help messages. For example:

           use Getopt::Long;
           use Pod::Usage;

           my $man = 0;
           my $help = 0;

           GetOptions('help|?' => \$help, man => \$man) or pod2usage(2);
           pod2usage(1) if $help;
           pod2usage(-exitstatus => 0, -verbose => 2) if $man;

           __END__

           =head1 NAME

           sample - Using Getopt::Long and Pod::Usage

           =head1 SYNOPSIS

           sample [options] [file ...]

            Options:
              -help            brief help message
              -man             full documentation

           =head1 OPTIONS

           =over 8

           =item B<-help>

           Print a brief help message and exits.

           =item B<-man>

           Prints the manual page and exits.

           =back

           =head1 DESCRIPTION

           B<This program> will read the given input file(s) and do something
           useful with the contents thereof.

           =cut

       See Pod::Usage for details.

   Parsing options from an arbitrary array
       By default, GetOptions parses the options that are present in the global array @ARGV. A special entry
       "GetOptionsFromArray" can be used to parse options from an arbitrary array.

           use Getopt::Long qw(GetOptionsFromArray);
           $ret = GetOptionsFromArray(\@myopts, ...);

       When used like this, the global @ARGV is not touched at all.

       The following two calls behave identically:

           $ret = GetOptions( ... );
           $ret = GetOptionsFromArray(\@ARGV, ... );

   Parsing options from an arbitrary string
       A special entry "GetOptionsFromString" can be used to parse options from an arbitrary string.

           use Getopt::Long qw(GetOptionsFromString);
           $ret = GetOptionsFromString($string, ...);

       The contents of the string are split into arguments using a call to "Text::ParseWords::shellwords".
       As with "GetOptionsFromArray", the global @ARGV is not touched.

       It is possible that, upon completion, not all arguments in the string have been processed.
       "GetOptionsFromString" will, when called in list context, return both the return status and an array
       reference to any remaining arguments:

           ($ret, $args) = GetOptionsFromString($string, ... );

       If any arguments remain, and "GetOptionsFromString" was not called in list context, a message will be
       given and "GetOptionsFromString" will return failure.

   Storing options values in a hash
       Sometimes, for example when there are a lot of options, having a separate variable for each of them
       can be cumbersome. GetOptions() supports, as an alternative mechanism, storing options values in a
       hash.

       To obtain this, a reference to a hash must be passed as the first argument to GetOptions(). For each
       option that is specified on the command line, the option value will be stored in the hash with the
       option name as key. Options that are not actually used on the command line will not be put in the
       hash, on other words, "exists($h{option})" (or defined()) can be used to test if an option was used.
       The drawback is that warnings will be issued if the program runs under "use strict" and uses
       $h{option} without testing with exists() or defined() first.

           my %h = ();
           GetOptions (\%h, 'length=i');       # will store in $h{length}

       For options that take list or hash values, it is necessary to indicate this by appending an "@" or
       "%" sign after the type:

           GetOptions (\%h, 'colours=s@');     # will push to @{$h{colours}}

       To make things more complicated, the hash may contain references to the actual destinations, for
       example:

           my $len = 0;
           my %h = ('length' => \$len);
           GetOptions (\%h, 'length=i');       # will store in $len

       This example is fully equivalent with:

           my $len = 0;
           GetOptions ('length=i' => \$len);   # will store in $len

       Any mixture is possible. For example, the most frequently used options could be stored in variables
       while all other options get stored in the hash:

           my $verbose = 0;                    # frequently referred
           my $debug = 0;                      # frequently referred
           my %h = ('verbose' => \$verbose, 'debug' => \$debug);
           GetOptions (\%h, 'verbose', 'debug', 'filter', 'size=i');
           if ( $verbose ) { ... }
           if ( exists $h{filter} ) { ... option 'filter' was specified ... }

   Bundling
       With bundling it is possible to set several single-character options at once. For example if "a", "v"
       and "x" are all valid options,

           -vax

       would set all three.

       Getopt::Long supports two levels of bundling. To enable bundling, a call to Getopt::Long::Configure
       is required.

       The first level of bundling can be enabled with:

           Getopt::Long::Configure ("bundling");

       Configured this way, single-character options can be bundled but long options must always start with
       a double dash "--" to avoid ambiguity. For example, when "vax", "a", "v" and "x" are all valid
       options,

           -vax

       would set "a", "v" and "x", but

           --vax

       would set "vax".

       The second level of bundling lifts this restriction. It can be enabled with:

           Getopt::Long::Configure ("bundling_override");

       Now, "-vax" would set the option "vax".

       When any level of bundling is enabled, option values may be inserted in the bundle. For example:

           -h24w80

       is equivalent to

           -h 24 -w 80

       When configured for bundling, single-character options are matched case sensitive while long options
       are matched case insensitive. To have the single-character options matched case insensitive as well,
       use:

           Getopt::Long::Configure ("bundling", "ignorecase_always");

       It goes without saying that bundling can be quite confusing.

   The lonesome dash
       Normally, a lone dash "-" on the command line will not be considered an option. Option processing
       will terminate (unless "permute" is configured) and the dash will be left in @ARGV.

       It is possible to get special treatment for a lone dash. This can be achieved by adding an option
       specification with an empty name, for example:

           GetOptions ('' => \$stdio);

       A lone dash on the command line will now be a legal option, and using it will set variable $stdio.

   Argument callback
       A special option 'name' "<>" can be used to designate a subroutine to handle non-option arguments.
       When GetOptions() encounters an argument that does not look like an option, it will immediately call
       this subroutine and passes it one parameter: the argument name. Well, actually it is an object that
       stringifies to the argument name.

       For example:

           my $width = 80;
           sub process { ... }
           GetOptions ('width=i' => \$width, '<>' => \&process);

       When applied to the following command line:

           arg1 --width=72 arg2 --width=60 arg3

       This will call "process("arg1")" while $width is 80, "process("arg2")" while $width is 72, and
       "process("arg3")" while $width is 60.

       This feature requires configuration option permute, see section "Configuring Getopt::Long".

Configuring Getopt::Long
       Getopt::Long can be configured by calling subroutine Getopt::Long::Configure(). This subroutine takes
       a list of quoted strings, each specifying a configuration option to be enabled, e.g.  "ignore_case",
       or disabled, e.g. "no_ignore_case". Case does not matter. Multiple calls to Configure() are possible.

       Alternatively, as of version 2.24, the configuration options may be passed together with the "use"
       statement:

           use Getopt::Long qw(:config no_ignore_case bundling);

       The following options are available:

       default     This option causes all configuration options to be reset to their default values.

       posix_default
                   This option causes all configuration options to be reset to their default values as if
                   the environment variable POSIXLY_CORRECT had been set.

       auto_abbrev Allow option names to be abbreviated to uniqueness.  Default is enabled unless
                   environment variable POSIXLY_CORRECT has been set, in which case "auto_abbrev" is
                   disabled.

       getopt_compat
                   Allow "+" to start options.  Default is enabled unless environment variable
                   POSIXLY_CORRECT has been set, in which case "getopt_compat" is disabled.

       gnu_compat  "gnu_compat" controls whether "--opt=" is allowed, and what it should do. Without
                   "gnu_compat", "--opt=" gives an error. With "gnu_compat", "--opt=" will give option "opt"
                   and empty value.  This is the way GNU getopt_long() does it.

       gnu_getopt  This is a short way of setting "gnu_compat" "bundling" "permute" "no_getopt_compat". With
                   "gnu_getopt", command line handling should be fully compatible with GNU getopt_long().

       require_order
                   Whether command line arguments are allowed to be mixed with options.  Default is disabled
                   unless environment variable POSIXLY_CORRECT has been set, in which case "require_order"
                   is enabled.

                   See also "permute", which is the opposite of "require_order".

       permute     Whether command line arguments are allowed to be mixed with options.  Default is enabled
                   unless environment variable POSIXLY_CORRECT has been set, in which case "permute" is
                   disabled.  Note that "permute" is the opposite of "require_order".

                   If "permute" is enabled, this means that

                       --foo arg1 --bar arg2 arg3

                   is equivalent to

                       --foo --bar arg1 arg2 arg3

                   If an argument callback routine is specified, @ARGV will always be empty upon successful
                   return of GetOptions() since all options have been processed. The only exception is when
                   "--" is used:

                       --foo arg1 --bar arg2 -- arg3

                   This will call the callback routine for arg1 and arg2, and then terminate GetOptions()
                   leaving "arg3" in @ARGV.

                   If "require_order" is enabled, options processing terminates when the first non-option is
                   encountered.

                       --foo arg1 --bar arg2 arg3

                   is equivalent to

                       --foo -- arg1 --bar arg2 arg3

                   If "pass_through" is also enabled, options processing will terminate at the first
                   unrecognized option, or non-option, whichever comes first.

       bundling (default: disabled)
                   Enabling this option will allow single-character options to be bundled. To distinguish
                   bundles from long option names, long options must be introduced with "--" and bundles
                   with "-".

                   Note that, if you have options "a", "l" and "all", and auto_abbrev enabled, possible
                   arguments and option settings are:

                       using argument               sets option(s)
                       -------------------------------------------a, ------------------------------------------a,
                       -a, --a                      a
                       -l, --l                      l
                       -al, -la, -ala, -all,...     a, l
                       --al, --all                  all

                   The surprising part is that "--a" sets option "a" (due to auto completion), not "all".

                   Note: disabling "bundling" also disables "bundling_override".

       bundling_override (default: disabled)
                   If "bundling_override" is enabled, bundling is enabled as with "bundling" but now long
                   option names override option bundles.

                   Note: disabling "bundling_override" also disables "bundling".

                   Note: Using option bundling can easily lead to unexpected results, especially when mixing
                   long options and bundles. Caveat emptor.

       ignore_case  (default: enabled)
                   If enabled, case is ignored when matching long option names. If, however, bundling is
                   enabled as well, single character options will be treated case-sensitive.

                   With "ignore_case", option specifications for options that only differ in case, e.g.,
                   "foo" and "Foo", will be flagged as duplicates.

                   Note: disabling "ignore_case" also disables "ignore_case_always".

       ignore_case_always (default: disabled)
                   When bundling is in effect, case is ignored on single-character options also.

                   Note: disabling "ignore_case_always" also disables "ignore_case".

       auto_version (default:disabled)
                   Automatically provide support for the --version option if the application did not specify
                   a handler for this option itself.

                   Getopt::Long will provide a standard version message that includes the program name, its
                   version (if $main::VERSION is defined), and the versions of Getopt::Long and Perl. The
                   message will be written to standard output and processing will terminate.

                   "auto_version" will be enabled if the calling program explicitly specified a version
                   number higher than 2.32 in the "use" or "require" statement.

       auto_help (default:disabled)
                   Automatically provide support for the --help and -? options if the application did not
                   specify a handler for this option itself.

                   Getopt::Long will provide a help message using module Pod::Usage. The message, derived
                   from the SYNOPSIS POD section, will be written to standard output and processing will
                   terminate.

                   "auto_help" will be enabled if the calling program explicitly specified a version number
                   higher than 2.32 in the "use" or "require" statement.

       pass_through (default: disabled)
                   Options that are unknown, ambiguous or supplied with an invalid option value are passed
                   through in @ARGV instead of being flagged as errors. This makes it possible to write
                   wrapper scripts that process only part of the user supplied command line arguments, and
                   pass the remaining options to some other program.

                   If "require_order" is enabled, options processing will terminate at the first
                   unrecognized option, or non-option, whichever comes first.  However, if "permute" is
                   enabled instead, results can become confusing.

                   Note that the options terminator (default "--"), if present, will also be passed through
                   in @ARGV.

       prefix      The string that starts options. If a constant string is not sufficient, see
                   "prefix_pattern".

       prefix_pattern
                   A Perl pattern that identifies the strings that introduce options.  Default is "--|-|\+"
                   unless environment variable POSIXLY_CORRECT has been set, in which case it is "--|-".

       long_prefix_pattern
                   A Perl pattern that allows the disambiguation of long and short prefixes. Default is
                   "--".

                   Typically you only need to set this if you are using nonstandard prefixes and want some
                   or all of them to have the same semantics as '--' does under normal circumstances.

                   For example, setting prefix_pattern to "--|-|\+|\/" and long_prefix_pattern to "--|\/"
                   would add Win32 style argument handling.

       debug (default: disabled)
                   Enable debugging output.

Exportable Methods
       VersionMessage
           This subroutine provides a standard version message. Its argument can be:

           •   A string containing the text of a message to print before printing the standard message.

           •   A numeric value corresponding to the desired exit status.

           •   A reference to a hash.

           If more than one argument is given then the entire argument list is assumed to be a hash.  If a
           hash is supplied (either as a reference or as a list) it should contain one or more elements with
           the following keys:

           "-message"
           "-msg"
               The text of a message to print immediately prior to printing the program's usage message.

           "-exitval"
               The desired exit status to pass to the exit() function.  This should be an integer, or else
               the string "NOEXIT" to indicate that control should simply be returned without terminating
               the invoking process.

           "-output"
               A reference to a filehandle, or the pathname of a file to which the usage message should be
               written. The default is "\*STDERR" unless the exit value is less than 2 (in which case the
               default is "\*STDOUT").

           You cannot tie this routine directly to an option, e.g.:

               GetOptions("version" => \&VersionMessage);

           Use this instead:

               GetOptions("version" => sub { VersionMessage() });

       HelpMessage
           This subroutine produces a standard help message, derived from the program's POD section SYNOPSIS
           using Pod::Usage. It takes the same arguments as VersionMessage(). In particular, you cannot tie
           it directly to an option, e.g.:

               GetOptions("help" => \&HelpMessage);

           Use this instead:

               GetOptions("help" => sub { HelpMessage() });

Return values and Errors
       Configuration errors and errors in the option definitions are signalled using die() and will
       terminate the calling program unless the call to Getopt::Long::GetOptions() was embedded in "eval {
       ...  }", or die() was trapped using $SIG{__DIE__}.

       GetOptions returns true to indicate success.  It returns false when the function detected one or more
       errors during option parsing. These errors are signalled using warn() and can be trapped with
       $SIG{__WARN__}.

Legacy
       The earliest development of "newgetopt.pl" started in 1990, with Perl version 4. As a result, its
       development, and the development of Getopt::Long, has gone through several stages. Since backward
       compatibility has always been extremely important, the current version of Getopt::Long still supports
       a lot of constructs that nowadays are no longer necessary or otherwise unwanted. This section
       describes briefly some of these 'features'.

   Default destinations
       When no destination is specified for an option, GetOptions will store the resultant value in a global
       variable named "opt_"XXX, where XXX is the primary name of this option. When a progam executes under
       "use strict" (recommended), these variables must be pre-declared with our() or "use vars".

           our $opt_length = 0;
           GetOptions ('length=i');    # will store in $opt_length

       To yield a usable Perl variable, characters that are not part of the syntax for variables are
       translated to underscores. For example, "--fpp-struct-return" will set the variable
       $opt_fpp_struct_return. Note that this variable resides in the namespace of the calling program, not
       necessarily "main". For example:

           GetOptions ("size=i", "sizes=i@");

       with command line "-size 10 -sizes 24 -sizes 48" will perform the equivalent of the assignments

           $opt_size = 10;
           @opt_sizes = (24, 48);

   Alternative option starters
       A string of alternative option starter characters may be passed as the first argument (or the first
       argument after a leading hash reference argument).

           my $len = 0;
           GetOptions ('/', 'length=i' => $len);

       Now the command line may look like:

           /length 24 -- arg

       Note that to terminate options processing still requires a double dash "--".

       GetOptions() will not interpret a leading "<>" as option starters if the next argument is a
       reference. To force "<" and ">" as option starters, use "><". Confusing? Well, using a starter
       argument is strongly deprecated anyway.

   Configuration variables
       Previous versions of Getopt::Long used variables for the purpose of configuring. Although
       manipulating these variables still work, it is strongly encouraged to use the "Configure" routine
       that was introduced in version 2.17. Besides, it is much easier.

Tips and Techniques
   Pushing multiple values in a hash option
       Sometimes you want to combine the best of hashes and arrays. For example, the command line:

         --list add=first --list add=second --list add=third

       where each successive 'list add' option will push the value of add into array ref $list->{'add'}. The
       result would be like

         $list->{add} = [qw(first second third)];

       This can be accomplished with a destination routine:

         GetOptions('list=s%' =>
                      sub { push(@{$list{$_[1]}}, $_[2]) });

Troubleshooting
   GetOptions does not return a false result when an option is not supplied
       That's why they're called 'options'.

   GetOptions does not split the command line correctly
       The command line is not split by GetOptions, but by the command line interpreter (CLI). On Unix, this
       is the shell. On Windows, it is COMMAND.COM or CMD.EXE. Other operating systems have other CLIs.

       It is important to know that these CLIs may behave different when the command line contains special
       characters, in particular quotes or backslashes. For example, with Unix shells you can use single
       quotes ("'") and double quotes (""") to group words together. The following alternatives are
       equivalent on Unix:

           "two words"
           'two words'
           two\ words

       In case of doubt, insert the following statement in front of your Perl program:

           print STDERR (join("|",@ARGV),"\n");

       to verify how your CLI passes the arguments to the program.

   Undefined subroutine &main::GetOptions called
       Are you running Windows, and did you write

           use GetOpt::Long;

       (note the capital 'O')?

   How do I put a "-?" option into a Getopt::Long?
       You can only obtain this using an alias, and Getopt::Long of at least version 2.13.

           use Getopt::Long;
           GetOptions ("help|?");    # -help and -? will both set $opt_help

AUTHOR
       Johan Vromans <jvromans@squirrel.nl>

COPYRIGHT AND DISCLAIMER
       This program is Copyright 1990,2009 by Johan Vromans.  This program is free software; you can
       redistribute it and/or modify it under the terms of the Perl Artistic License or the GNU General
       Public License as published by the Free Software Foundation; either version 2 of the License, or (at
       your option) any later version.

       This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without
       even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
       General Public License for more details.

       If you do not have a copy of the GNU General Public License write to the Free Software Foundation,
       Inc., 675 Mass Ave, Cambridge, MA 02139, USA.



perl v5.16.2                                     2012-08-26                                Getopt::Long(3pm)