Страницы справочника OS X

Эта страница руководства для  версии 10.9 Mac OS X

Читать страницы руководства

IO::Compress::Gzip(3pm)               Perl Programmers Reference Guide               IO::Compress::Gzip(3pm)



NAME
       IO::Compress::Gzip - Write RFC 1952 files/buffers

SYNOPSIS
           use IO::Compress::Gzip qw(gzip $GzipError) ;

           my $status = gzip $input => $output [,OPTS]
               or die "gzip failed: $GzipError\n";

           my $z = new IO::Compress::Gzip $output [,OPTS]
               or die "gzip failed: $GzipError\n";

           $z->print($string);
           $z->printf($format, $string);
           $z->write($string);
           $z->syswrite($string [, $length, $offset]);
           $z->flush();
           $z->tell();
           $z->eof();
           $z->seek($position, $whence);
           $z->binmode();
           $z->fileno();
           $z->opened();
           $z->autoflush();
           $z->input_line_number();
           $z->newStream( [OPTS] );

           $z->deflateParams();

           $z->close() ;

           $GzipError ;

           # IO::File mode

           print $z $string;
           printf $z $format, $string;
           tell $z
           eof $z
           seek $z, $position, $whence
           binmode $z
           fileno $z
           close $z ;

DESCRIPTION
       This module provides a Perl interface that allows writing compressed data to files or buffer as
       defined in RFC 1952.

       All the gzip headers defined in RFC 1952 can be created using this module.

       For reading RFC 1952 files/buffers, see the companion module IO::Uncompress::Gunzip.

Functional Interface
       A top-level function, "gzip", is provided to carry out "one-shot" compression between buffers and/or
       files. For finer control over the compression process, see the "OO Interface" section.

           use IO::Compress::Gzip qw(gzip $GzipError) ;

           gzip $input => $output [,OPTS]
               or die "gzip failed: $GzipError\n";

       The functional interface needs Perl5.005 or better.

   gzip $input => $output [, OPTS]
       "gzip" expects at least two parameters, $input and $output.

       The $input parameter

       The parameter, $input, is used to define the source of the uncompressed data.

       It can take one of the following forms:

       A filename
            If the $input parameter is a simple scalar, it is assumed to be a filename. This file will be
            opened for reading and the input data will be read from it.

       A filehandle
            If the $input parameter is a filehandle, the input data will be read from it.  The string '-'
            can be used as an alias for standard input.

       A scalar reference
            If $input is a scalar reference, the input data will be read from $$input.

       An array reference
            If $input is an array reference, each element in the array must be a filename.

            The input data will be read from each file in turn.

            The complete array will be walked to ensure that it only contains valid filenames before any
            data is compressed.

       An Input FileGlob string
            If $input is a string that is delimited by the characters "<" and ">" "gzip" will assume that it
            is an input fileglob string. The input is the list of files that match the fileglob.

            If the fileglob does not match any files ...

            See File::GlobMapper for more details.

       If the $input parameter is any other type, "undef" will be returned.

       In addition, if $input is a simple filename, the default values for the "Name" and "Time" options
       will be sourced from that file.

       If you do not want to use these defaults they can be overridden by explicitly setting the "Name" and
       "Time" options or by setting the "Minimal" parameter.

       The $output parameter

       The parameter $output is used to control the destination of the compressed data. This parameter can
       take one of these forms.

       A filename
            If the $output parameter is a simple scalar, it is assumed to be a filename.  This file will be
            opened for writing and the compressed data will be written to it.

       A filehandle
            If the $output parameter is a filehandle, the compressed data will be written to it.  The string
            '-' can be used as an alias for standard output.

       A scalar reference
            If $output is a scalar reference, the compressed data will be stored in $$output.

       An Array Reference
            If $output is an array reference, the compressed data will be pushed onto the array.

       An Output FileGlob
            If $output is a string that is delimited by the characters "<" and ">" "gzip" will assume that
            it is an output fileglob string. The output is the list of files that match the fileglob.

            When $output is an fileglob string, $input must also be a fileglob string. Anything else is an
            error.

       If the $output parameter is any other type, "undef" will be returned.

   Notes
       When $input maps to multiple files/buffers and $output is a single file/buffer the input
       files/buffers will be stored in $output as a concatenated series of compressed data streams.

   Optional Parameters
       Unless specified below, the optional parameters for "gzip", "OPTS", are the same as those used with
       the OO interface defined in the "Constructor Options" section below.

       "AutoClose => 0|1"
            This option applies to any input or output data streams to "gzip" that are filehandles.

            If "AutoClose" is specified, and the value is true, it will result in all input and/or output
            filehandles being closed once "gzip" has completed.

            This parameter defaults to 0.

       "BinModeIn => 0|1"
            When reading from a file or filehandle, set "binmode" before reading.

            Defaults to 0.

       "Append => 0|1"
            The behaviour of this option is dependent on the type of output data stream.

            •    A Buffer

                 If "Append" is enabled, all compressed data will be append to the end of the output buffer.
                 Otherwise the output buffer will be cleared before any compressed data is written to it.

            •    A Filename

                 If "Append" is enabled, the file will be opened in append mode. Otherwise the contents of
                 the file, if any, will be truncated before any compressed data is written to it.

            •    A Filehandle

                 If "Append" is enabled, the filehandle will be positioned to the end of the file via a call
                 to "seek" before any compressed data is written to it.  Otherwise the file pointer will not
                 be moved.

            When "Append" is specified, and set to true, it will append all compressed data to the output
            data stream.

            So when the output is a filehandle it will carry out a seek to the eof before writing any
            compressed data. If the output is a filename, it will be opened for appending. If the output is
            a buffer, all compressed data will be appened to the existing buffer.

            Conversely when "Append" is not specified, or it is present and is set to false, it will operate
            as follows.

            When the output is a filename, it will truncate the contents of the file before writing any
            compressed data. If the output is a filehandle its position will not be changed. If the output
            is a buffer, it will be wiped before any compressed data is output.

            Defaults to 0.

   Examples
       To read the contents of the file "file1.txt" and write the compressed data to the file
       "file1.txt.gz".

           use strict ;
           use warnings ;
           use IO::Compress::Gzip qw(gzip $GzipError) ;

           my $input = "file1.txt";
           gzip $input => "$input.gz"
               or die "gzip failed: $GzipError\n";

       To read from an existing Perl filehandle, $input, and write the compressed data to a buffer, $buffer.

           use strict ;
           use warnings ;
           use IO::Compress::Gzip qw(gzip $GzipError) ;
           use IO::File ;

           my $input = new IO::File "<file1.txt"
               or die "Cannot open 'file1.txt': $!\n" ;
           my $buffer ;
           gzip $input => \$buffer
               or die "gzip failed: $GzipError\n";

       To compress all files in the directory "/my/home" that match "*.txt" and store the compressed data in
       the same directory

           use strict ;
           use warnings ;
           use IO::Compress::Gzip qw(gzip $GzipError) ;

           gzip '</my/home/*.txt>' => '<*.gz>'
               or die "gzip failed: $GzipError\n";

       and if you want to compress each file one at a time, this will do the trick

           use strict ;
           use warnings ;
           use IO::Compress::Gzip qw(gzip $GzipError) ;

           for my $input ( glob "/my/home/*.txt" )
           {
               my $output = "$input.gz" ;
               gzip $input => $output
                   or die "Error compressing '$input': $GzipError\n";
           }

OO Interface
   Constructor
       The format of the constructor for "IO::Compress::Gzip" is shown below

           my $z = new IO::Compress::Gzip $output [,OPTS]
               or die "IO::Compress::Gzip failed: $GzipError\n";

       It returns an "IO::Compress::Gzip" object on success and undef on failure.  The variable $GzipError
       will contain an error message on failure.

       If you are running Perl 5.005 or better the object, $z, returned from IO::Compress::Gzip can be used
       exactly like an IO::File filehandle.  This means that all normal output file operations can be
       carried out with $z.  For example, to write to a compressed file/buffer you can use either of these
       forms

           $z->print("hello world\n");
           print $z "hello world\n";

       The mandatory parameter $output is used to control the destination of the compressed data. This
       parameter can take one of these forms.

       A filename
            If the $output parameter is a simple scalar, it is assumed to be a filename. This file will be
            opened for writing and the compressed data will be written to it.

       A filehandle
            If the $output parameter is a filehandle, the compressed data will be written to it.  The string
            '-' can be used as an alias for standard output.

       A scalar reference
            If $output is a scalar reference, the compressed data will be stored in $$output.

       If the $output parameter is any other type, "IO::Compress::Gzip"::new will return undef.

   Constructor Options
       "OPTS" is any combination of the following options:

       "AutoClose => 0|1"
            This option is only valid when the $output parameter is a filehandle. If specified, and the
            value is true, it will result in the $output being closed once either the "close" method is
            called or the "IO::Compress::Gzip" object is destroyed.

            This parameter defaults to 0.

       "Append => 0|1"
            Opens $output in append mode.

            The behaviour of this option is dependent on the type of $output.

            •    A Buffer

                 If $output is a buffer and "Append" is enabled, all compressed data will be append to the
                 end of $output. Otherwise $output will be cleared before any data is written to it.

            •    A Filename

                 If $output is a filename and "Append" is enabled, the file will be opened in append mode.
                 Otherwise the contents of the file, if any, will be truncated before any compressed data is
                 written to it.

            •    A Filehandle

                 If $output is a filehandle, the file pointer will be positioned to the end of the file via
                 a call to "seek" before any compressed data is written to it.  Otherwise the file pointer
                 will not be moved.

            This parameter defaults to 0.

       "Merge => 0|1"
            This option is used to compress input data and append it to an existing compressed data stream
            in $output. The end result is a single compressed data stream stored in $output.

            It is a fatal error to attempt to use this option when $output is not an RFC 1952 data stream.

            There are a number of other limitations with the "Merge" option:

            1.   This module needs to have been built with zlib 1.2.1 or better to work. A fatal error will
                 be thrown if "Merge" is used with an older version of zlib.

            2.   If $output is a file or a filehandle, it must be seekable.

            This parameter defaults to 0.

       -Level
            Defines the compression level used by zlib. The value should either be a number between 0 and 9
            (0 means no compression and 9 is maximum compression), or one of the symbolic constants defined
            below.

               Z_NO_COMPRESSION
               Z_BEST_SPEED
               Z_BEST_COMPRESSION
               Z_DEFAULT_COMPRESSION

            The default is Z_DEFAULT_COMPRESSION.

            Note, these constants are not imported by "IO::Compress::Gzip" by default.

                use IO::Compress::Gzip qw(:strategy);
                use IO::Compress::Gzip qw(:constants);
                use IO::Compress::Gzip qw(:all);

       -Strategy
            Defines the strategy used to tune the compression. Use one of the symbolic constants defined
            below.

               Z_FILTERED
               Z_HUFFMAN_ONLY
               Z_RLE
               Z_FIXED
               Z_DEFAULT_STRATEGY

            The default is Z_DEFAULT_STRATEGY.

       "Minimal => 0|1"
            If specified, this option will force the creation of the smallest possible compliant gzip header
            (which is exactly 10 bytes long) as defined in RFC 1952.

            See the section titled "Compliance" in RFC 1952 for a definition of the values used for the
            fields in the gzip header.

            All other parameters that control the content of the gzip header will be ignored if this
            parameter is set to 1.

            This parameter defaults to 0.

       "Comment => $comment"
            Stores the contents of $comment in the COMMENT field in the gzip header.  By default, no comment
            field is written to the gzip file.

            If the "-Strict" option is enabled, the comment can only consist of ISO 8859-1 characters plus
            line feed.

            If the "-Strict" option is disabled, the comment field can contain any character except NULL. If
            any null characters are present, the field will be truncated at the first NULL.

       "Name => $string"
            Stores the contents of $string in the gzip NAME header field. If "Name" is not specified, no
            gzip NAME field will be created.

            If the "-Strict" option is enabled, $string can only consist of ISO 8859-1 characters.

            If "-Strict" is disabled, then $string can contain any character except NULL. If any null
            characters are present, the field will be truncated at the first NULL.

       "Time => $number"
            Sets the MTIME field in the gzip header to $number.

            This field defaults to the time the "IO::Compress::Gzip" object was created if this option is
            not specified.

       "TextFlag => 0|1"
            This parameter controls the setting of the FLG.FTEXT bit in the gzip header. It is used to
            signal that the data stored in the gzip file/buffer is probably text.

            The default is 0.

       "HeaderCRC => 0|1"
            When true this parameter will set the FLG.FHCRC bit to 1 in the gzip header and set the CRC16
            header field to the CRC of the complete gzip header except the CRC16 field itself.

            Note that gzip files created with the "HeaderCRC" flag set to 1 cannot be read by most, if not
            all, of the the standard gunzip utilities, most notably gzip version 1.2.4. You should therefore
            avoid using this option if you want to maximize the portability of your gzip files.

            This parameter defaults to 0.

       "OS_Code => $value"
            Stores $value in the gzip OS header field. A number between 0 and 255 is valid.

            If not specified, this parameter defaults to the OS code of the Operating System this module was
            built on. The value 3 is used as a catch-all for all Unix variants and unknown Operating
            Systems.

       "ExtraField => $data"
            This parameter allows additional metadata to be stored in the ExtraField in the gzip header. An
            RFC 1952 compliant ExtraField consists of zero or more subfields. Each subfield consists of a
            two byte header followed by the subfield data.

            The list of subfields can be supplied in any of the following formats

                -ExtraField => [$id1, $data1,
                                $id2, $data2,
                                 ...
                               ]
                -ExtraField => [ [$id1 => $data1],
                                 [$id2 => $data2],
                                 ...
                               ]
                -ExtraField => { $id1 => $data1,
                                 $id2 => $data2,
                                 ...
                               }

            Where $id1, $id2 are two byte subfield ID's. The second byte of the ID cannot be 0, unless the
            "Strict" option has been disabled.

            If you use the hash syntax, you have no control over the order in which the ExtraSubFields are
            stored, plus you cannot have SubFields with duplicate ID.

            Alternatively the list of subfields can by supplied as a scalar, thus

                -ExtraField => $rawdata

            If you use the raw format, and the "Strict" option is enabled, "IO::Compress::Gzip" will check
            that $rawdata consists of zero or more conformant sub-fields. When "Strict" is disabled,
            $rawdata can consist of any arbitrary byte stream.

            The maximum size of the Extra Field 65535 bytes.

       "ExtraFlags => $value"
            Sets the XFL byte in the gzip header to $value.

            If this option is not present, the value stored in XFL field will be determined by the setting
            of the "Level" option.

            If "Level => Z_BEST_SPEED" has been specified then XFL is set to 2.  If "Level =>
            Z_BEST_COMPRESSION" has been specified then XFL is set to 4.  Otherwise XFL is set to 0.

       "Strict => 0|1"
            "Strict" will optionally police the values supplied with other options to ensure they are
            compliant with RFC1952.

            This option is enabled by default.

            If "Strict" is enabled the following behaviour will be policed:

            •    The value supplied with the "Name" option can only contain ISO 8859-1 characters.

            •    The value supplied with the "Comment" option can only contain ISO 8859-1 characters plus
                 line-feed.

            •    The values supplied with the "-Name" and "-Comment" options cannot contain multiple
                 embedded nulls.

            •    If an "ExtraField" option is specified and it is a simple scalar, it must conform to the
                 sub-field structure as defined in RFC 1952.

            •    If an "ExtraField" option is specified the second byte of the ID will be checked in each
                 subfield to ensure that it does not contain the reserved value 0x00.

            When "Strict" is disabled the following behaviour will be policed:

            •    The value supplied with "-Name" option can contain any character except NULL.

            •    The value supplied with "-Comment" option can contain any character except NULL.

            •    The values supplied with the "-Name" and "-Comment" options can contain multiple embedded
                 nulls. The string written to the gzip header will consist of the characters up to, but not
                 including, the first embedded NULL.

            •    If an "ExtraField" option is specified and it is a simple scalar, the structure will not be
                 checked. The only error is if the length is too big.

            •    The ID header in an "ExtraField" sub-field can consist of any two bytes.

   Examples
       TODO

Methods
   print
       Usage is

           $z->print($data)
           print $z $data

       Compresses and outputs the contents of the $data parameter. This has the same behaviour as the
       "print" built-in.

       Returns true if successful.

   printf
       Usage is

           $z->printf($format, $data)
           printf $z $format, $data

       Compresses and outputs the contents of the $data parameter.

       Returns true if successful.

   syswrite
       Usage is

           $z->syswrite $data
           $z->syswrite $data, $length
           $z->syswrite $data, $length, $offset

       Compresses and outputs the contents of the $data parameter.

       Returns the number of uncompressed bytes written, or "undef" if unsuccessful.

   write
       Usage is

           $z->write $data
           $z->write $data, $length
           $z->write $data, $length, $offset

       Compresses and outputs the contents of the $data parameter.

       Returns the number of uncompressed bytes written, or "undef" if unsuccessful.

   flush
       Usage is

           $z->flush;
           $z->flush($flush_type);

       Flushes any pending compressed data to the output file/buffer.

       This method takes an optional parameter, $flush_type, that controls how the flushing will be carried
       out. By default the $flush_type used is "Z_FINISH". Other valid values for $flush_type are
       "Z_NO_FLUSH", "Z_SYNC_FLUSH", "Z_FULL_FLUSH" and "Z_BLOCK". It is strongly recommended that you only
       set the "flush_type" parameter if you fully understand the implications of what it does - overuse of
       "flush" can seriously degrade the level of compression achieved. See the "zlib" documentation for
       details.

       Returns true on success.

   tell
       Usage is

           $z->tell()
           tell $z

       Returns the uncompressed file offset.

   eof
       Usage is

           $z->eof();
           eof($z);

       Returns true if the "close" method has been called.

   seek
           $z->seek($position, $whence);
           seek($z, $position, $whence);

       Provides a sub-set of the "seek" functionality, with the restriction that it is only legal to seek
       forward in the output file/buffer.  It is a fatal error to attempt to seek backward.

       Empty parts of the file/buffer will have NULL (0x00) bytes written to them.

       The $whence parameter takes one the usual values, namely SEEK_SET, SEEK_CUR or SEEK_END.

       Returns 1 on success, 0 on failure.

   binmode
       Usage is

           $z->binmode
           binmode $z ;

       This is a noop provided for completeness.

   opened
           $z->opened()

       Returns true if the object currently refers to a opened file/buffer.

   autoflush
           my $prev = $z->autoflush()
           my $prev = $z->autoflush(EXPR)

       If the $z object is associated with a file or a filehandle, this method returns the current autoflush
       setting for the underlying filehandle. If "EXPR" is present, and is non-zero, it will enable flushing
       after every write/print operation.

       If $z is associated with a buffer, this method has no effect and always returns "undef".

       Note that the special variable $| cannot be used to set or retrieve the autoflush setting.

   input_line_number
           $z->input_line_number()
           $z->input_line_number(EXPR)

       This method always returns "undef" when compressing.

   fileno
           $z->fileno()
           fileno($z)

       If the $z object is associated with a file or a filehandle, "fileno" will return the underlying file
       descriptor. Once the "close" method is called "fileno" will return "undef".

       If the $z object is is associated with a buffer, this method will return "undef".

   close
           $z->close() ;
           close $z ;

       Flushes any pending compressed data and then closes the output file/buffer.

       For most versions of Perl this method will be automatically invoked if the IO::Compress::Gzip object
       is destroyed (either explicitly or by the variable with the reference to the object going out of
       scope). The exceptions are Perl versions 5.005 through 5.00504 and 5.8.0. In these cases, the "close"
       method will be called automatically, but not until global destruction of all live objects when the
       program is terminating.

       Therefore, if you want your scripts to be able to run on all versions of Perl, you should call
       "close" explicitly and not rely on automatic closing.

       Returns true on success, otherwise 0.

       If the "AutoClose" option has been enabled when the IO::Compress::Gzip object was created, and the
       object is associated with a file, the underlying file will also be closed.

   newStream([OPTS])
       Usage is

           $z->newStream( [OPTS] )

       Closes the current compressed data stream and starts a new one.

       OPTS consists of any of the the options that are available when creating the $z object.

       See the "Constructor Options" section for more details.

   deflateParams
       Usage is

           $z->deflateParams

       TODO

Importing
       A number of symbolic constants are required by some methods in "IO::Compress::Gzip". None are
       imported by default.

       :all Imports "gzip", $GzipError and all symbolic constants that can be used by "IO::Compress::Gzip".
            Same as doing this

                use IO::Compress::Gzip qw(gzip $GzipError :constants) ;

       :constants
            Import all symbolic constants. Same as doing this

                use IO::Compress::Gzip qw(:flush :level :strategy) ;

       :flush
            These symbolic constants are used by the "flush" method.

                Z_NO_FLUSH
                Z_PARTIAL_FLUSH
                Z_SYNC_FLUSH
                Z_FULL_FLUSH
                Z_FINISH
                Z_BLOCK

       :level
            These symbolic constants are used by the "Level" option in the constructor.

                Z_NO_COMPRESSION
                Z_BEST_SPEED
                Z_BEST_COMPRESSION
                Z_DEFAULT_COMPRESSION

       :strategy
            These symbolic constants are used by the "Strategy" option in the constructor.

                Z_FILTERED
                Z_HUFFMAN_ONLY
                Z_RLE
                Z_FIXED
                Z_DEFAULT_STRATEGY

EXAMPLES
   Apache::GZip Revisited
       See IO::Compress::FAQ

   Working with Net::FTP
       See IO::Compress::FAQ

SEE ALSO
       Compress::Zlib, IO::Uncompress::Gunzip, IO::Compress::Deflate, IO::Uncompress::Inflate,
       IO::Compress::RawDeflate, IO::Uncompress::RawInflate, IO::Compress::Bzip2, IO::Uncompress::Bunzip2,
       IO::Compress::Lzma, IO::Uncompress::UnLzma, IO::Compress::Xz, IO::Uncompress::UnXz,
       IO::Compress::Lzop, IO::Uncompress::UnLzop, IO::Compress::Lzf, IO::Uncompress::UnLzf,
       IO::Uncompress::AnyInflate, IO::Uncompress::AnyUncompress

       Compress::Zlib::FAQ

       File::GlobMapper, Archive::Zip, Archive::Tar, IO::Zlib

       For RFC 1950, 1951 and 1952 see http://www.faqs.org/rfcs/rfc195_.html,
       http://www.faqs.org/rfcs/rfc1951.html and http://www.faqs.org/rfcs/rfc1952.html

       The zlib compression library was written by Jean-loup Gailly gzip@prep.ai.mit.edu and Mark Adler
       madler@alumni.caltech.edu.

       The primary site for the zlib compression library is http://www.zlib.org.

       The primary site for gzip is http://www.gzip.org.

AUTHOR
       This module was written by Paul Marquess, pmqs@cpan.org.

MODIFICATION HISTORY
       See the Changes file.

COPYRIGHT AND LICENSE
       Copyright (c) 2005-2010 Paul Marquess. All rights reserved.

       This program is free software; you can redistribute it and/or modify it under the same terms as Perl
       itself.



perl v5.12.5                                     2012-11-03                          IO::Compress::Gzip(3pm)