Страницы справочника OS X

Эта страница руководства для  версии 10.9 Mac OS X

Читать страницы руководства

C(3)                                 User Contributed Perl Documentation                                C(3)



NAME
       Inline::C - Write Perl Subroutines in C

DESCRIPTION
       "Inline::C" is a module that allows you to write Perl subroutines in C.  Since version 0.30 the
       Inline module supports multiple programming languages and each language has its own support module.
       This document describes how to use Inline with the C programming language. It also goes a bit into
       Perl C internals.

       If you want to start working with programming examples right away, check out Inline::C-Cookbook. For
       more information on Inline in general, see Inline.

Usage
       You never actually use "Inline::C" directly. It is just a support module for using "Inline.pm" with
       C. So the usage is always:

           use Inline C => ...;

       or

           bind Inline C => ...;

Function Definitions
       The Inline grammar for C recognizes certain function definitions (or signatures) in your C code. If a
       signature is recognized by Inline, then it will be available in Perl-space. That is, Inline will
       generate the "glue" necessary to call that function as if it were a Perl subroutine.  If the
       signature is not recognized, Inline will simply ignore it, with no complaints. It will not be
       available from Perl-space, although it will be available from C-space.

       Inline looks for ANSI/prototype style function definitions. They must be of the form:

           return-type function-name ( type-name-pairs ) { ... }

       The most common types are: "int", "long", "double", "char*", and "SV*". But you can use any type for
       which Inline can find a typemap.  Inline uses the "typemap" file distributed with Perl as the
       default.  You can specify more typemaps with the TYPEMAPS configuration option.

       A return type of "void" may also be used. The following are examples of valid function definitions.

           int Foo(double num, char* str) {
           void Foo(double num, char* str) {
           void Foo(SV*, ...) {
           long Foo(int i, int j, ...) {
           SV* Foo(void) { # 'void' arg invalid with the ParseRecDescent parser.
                           # Works only with the ParseRegExp parser.
                           # See the section on USING (below).
           SV* Foo() {  # Alternative to specifying 'void' arg. Is valid with
                        # both the ParseRecDescent and ParseRegExp parsers.

       The following definitions would not be recognized:

           Foo(int i) {               # no return type
           int Foo(float f) {         # no (default) typemap for float
           int Foo(num, str) double num; char* str; {

       Notice that Inline only looks for function definitions, not function prototypes. Definitions are the
       syntax directly preceding a function body. Also Inline does not scan external files, like headers.
       Only the code passed to Inline is used to create bindings; although other libraries can linked in,
       and called from C-space.

C Configuration Options
       For information on how to specify Inline configuration options, see Inline. This section describes
       each of the configuration options available for C. Most of the options correspond either to MakeMaker
       or XS options of the same name. See ExtUtils::MakeMaker and perlxs.

   AUTO_INCLUDE
       Specifies extra statements to automatically included. They will be added onto the defaults. A newline
       char will be automatically added.

           use Inline C => Config => AUTO_INCLUDE => '#include "yourheader.h"';

   AUTOWRAP
       If you 'ENABLE => AUTOWRAP', Inline::C will parse function declarations (prototype statements) in
       your C code. For each declaration it can bind to, it will create a dummy wrapper that will call the
       real function which may be in an external library. This is a nice convenience for functions that
       would otherwise just require an empty wrapper function.

       This is similar to the base functionality you get from "h2xs". It can be very useful for binding to
       external libraries.

   BOOT
       Specifies C code to be executed in the XS BOOT section. Corresponds to the XS parameter.

   CC
       Specify which compiler to use.

   CCFLAGS
       Specify compiler flags - same as ExtUtils::MakeMaker's CCFLAGS option.  Whatever gets specified here
       replaces the default $Config{ccflags}.  Often, you'll want to add an extra flag or two without
       clobbering the default flags in which case you could instead use CCFLAGSEX (see below) or, iff
       Config.pm has already been loaded:

         use Inline C => Config => CCFLAGS => $Config{ccflags} . " -DXTRA -DTOO";

   CCFLAGSEX
       Extend compiler flags.  Sets CCFLAGS to $Config{ccflags} followed by a space, followed by the
       specified value:

         use Inline C => Config => CCFLAGSEX => "-DXTRA -DTOO";

   FILTERS
       Allows you to specify a list of source code filters. If more than one is requested, be sure to group
       them with an array ref. The filters can either be subroutine references or names of filters provided
       by the supplementary Inline::Filters module.

       Your source code will be filtered just before it is parsed by Inline.  The MD5 fingerprint is
       generated before filtering. Source code filters can be used to do things like stripping out POD
       documentation, pre-expanding #include statements or whatever else you please. For example:

           use Inline C => DATA =>
                      FILTERS => [Strip_POD => \&MyFilter => Preprocess ];

       Filters are invoked in the order specified. See Inline::Filters for more information.

   INC
       Specifies an include path to use. Corresponds to the MakeMaker parameter.  Expects a fully qualified
       path.

           use Inline C => Config => INC => '-I/inc/path';

   LD
       Specify which linker to use.

   LDDLFLAGS
       Specify which linker flags to use.

       NOTE: These flags will completely override the existing flags, instead of just adding to them. So if
       you need to use those too, you must respecify them here.

   LIBS
       Specifies external libraries that should be linked into your code.  Corresponds to the MakeMaker
       parameter.  Provide a fully qualified path with the -L switch if the library is in a location where
       it won't be found automatically.

           use Inline C => Config => LIBS => '-lyourlib';

       or

           use Inline C => Config => LIBS => '-L/your/path -lyourlib';

   MAKE
       Specify the name of the 'make' utility to use.

   MYEXTLIB
       Specifies a user compiled object that should be linked in. Corresponds to the MakeMaker parameter.
       Expects a fully qualified path.

           use Inline C => Config => MYEXTLIB => '/your/path/yourmodule.so';

   OPTIMIZE
       This controls the MakeMaker OPTIMIZE setting. By setting this value to '-g', you can turn on
       debugging support for your Inline extensions.  This will allow you to be able to set breakpoints in
       your C code using a debugger like gdb.

   PREFIX
       Specifies a prefix that will be automatically stripped from C functions when they are bound to Perl.
       Useful for creating wrappers for shared library API-s, and binding to the original names in Perl.
       Also useful when names conflict with Perl internals. Corresponds to the XS parameter.

           use Inline C => Config => PREFIX => 'ZLIB_';

   PRE_HEAD
       Specifies code that will precede the inclusion of all files specified in AUTO_INCLUDE (ie EXTERN.h,
       perl.h, XSUB.h, INLINE.h and anything else that might have been added to AUTO_INCLUDE by the user).
       If the specified value identifies a file, the contents of that file will be inserted, otherwise the
       specified value is inserted.

         use Inline C => Config => PRE_HEAD => $code_or_filename;

   TYPEMAPS
       Specifies extra typemap files to use. These types will modify the behaviour of the C parsing.
       Corresponds to the MakeMaker parameter.  Specify either a fully qualified path or a path relative to
       the cwd (ie relative to what the cwd is at the time the script is loaded).

           use Inline C => Config => TYPEMAPS => '/your/path/typemap';

   USING
       Specifies which parser to use. Default is 'ParseRecDescent', which uses the Parse::RecDescent module.
       The only other option is 'ParseRegExp', which uses the Inline::C::ParseRegExp module that ships with
       Inline.

           use Inline C => Config => USING => 'ParseRegExp';

C-Perl Bindings
       This section describes how the "Perl" variables get mapped to "C" variables and back again.

       First, you need to know how "Perl" passes arguments back and forth to subroutines. Basically it uses
       a stack (also known as the Stack).  When a sub is called, all of the parenthesized arguments get
       expanded into a list of scalars and pushed onto the Stack. The subroutine then pops all of its
       parameters off of the Stack. When the sub is done, it pushes all of its return values back onto the
       Stack.

       The Stack is an array of scalars known internally as "SV"'s. The Stack is actually an array of
       pointers to SV or "SV*"; therefore every element of the Stack is natively a "SV*". For FMTYEWTK about
       this, read "perldoc perlguts".

       So back to variable mapping. XS uses a thing known as "typemaps" to turn each "SV*" into a "C" type
       and back again. This is done through various XS macro calls, casts and the Perl API. See "perldoc
       perlapi".  XS allows you to define your own typemaps as well for fancier non-standard types such as
       "typedef"-ed structs.

       Inline uses the default Perl typemap file for its default types. This file is called
       "/usr/local/lib/perl5/5.6.1/ExtUtils/typemap", or something similar, depending on your Perl
       installation. It has definitions for over 40 types, which are automatically used by Inline.  (You
       should probably browse this file at least once, just to get an idea of the possibilities.)

       Inline parses your code for these types and generates the XS code to map them. The most commonly used
       types are:

        - int
        - long
        - double
        - char*
        - void
        - SV*

       If you need to deal with a type that is not in the defaults, just use the generic "SV*" type in the
       function definition. Then inside your code, do the mapping yourself. Alternatively, you can create
       your own typemap files and specify them using the "TYPEMAPS" configuration option.

       A return type of "void" has a special meaning to Inline. It means that you plan to push the values
       back onto the Stack yourself. This is what you need to do to return a list of values. If you really
       don't want to return anything (the traditional meaning of "void") then simply don't push anything
       back.

       If ellipsis or "..." is used at the end of an argument list, it means that any number of "SV*"s may
       follow. Again you will need to pop the values off of the "Stack" yourself.

       See "Examples" below.

The Inline Stack Macros
       When you write Inline C, the following lines are automatically prepended to your code (by default):

           #include "EXTERN.h"
           #include "perl.h"
           #include "XSUB.h"
           #include "INLINE.h"

       The file "INLINE.h" defines a set of macros that are useful for handling the Perl Stack from your C
       functions.

       Inline_Stack_Vars
           You'll need to use this one, if you want to use the others. It sets up a few local variables:
           "sp", "items", "ax" and "mark", for use by the other macros. It's not important to know what they
           do, but I mention them to avoid possible name conflicts.

           NOTE: Since this macro declares variables, you'll need to put it with your other variable
           declarations at the top of your function. It must come before any executable statements and
           before any other "Inline_Stack" macros.

       Inline_Stack_Items
           Returns the number of arguments passed in on the Stack.

       Inline_Stack_Item(i)
           Refers to a particular "SV*" in the Stack, where "i" is an index number starting from zero. Can
           be used to get or set the value.

       Inline_Stack_Reset
           Use this before pushing anything back onto the Stack. It resets the internal Stack pointer to the
           beginning of the Stack.

       Inline_Stack_Push(sv)
           Push a return value back onto the Stack. The value must be of type "SV*".

       Inline_Stack_Done
           After you have pushed all of your return values, you must call this macro.

       Inline_Stack_Return(n)
           Return "n" items on the Stack.

       Inline_Stack_Void
           A special macro to indicate that you really don't want to return anything. Same as:

               Inline_Stack_Return(0);

           Please note that this macro actually returns from your function.

       Each of these macros is available in 3 different styles to suit your coding tastes. The following
       macros are equivalent.

           Inline_Stack_Vars
           inline_stack_vars
           INLINE_STACK_VARS

       All of this functionality is available through XS macro calls as well.  So why duplicate the
       functionality? There are a few reasons why I decided to offer this set of macros. First, as a
       convenient way to access the Stack. Second, for consistent, self documenting, non-cryptic coding.
       Third, for future compatibility. It occured to me that if a lot of people started using XS macros for
       their C code, the interface might break under Perl6. By using this set, hopefully I will be able to
       insure future compatibility of argument handling.

       Of course, if you use the rest of the Perl API, your code will most likely break under Perl6. So this
       is not a 100% guarantee. But since argument handling is the most common interface you're likely to
       use, it seemed like a wise thing to do.

Writing C Subroutines
       The definitions of your C functions will fall into one of the following four categories. For each
       category there are special considerations.

       1.
               int Foo(int arg1, char* arg2, SV* arg3) {

           This is the simplest case. You have a non "void" return type and a fixed length argument list.
           You don't need to worry about much. All the conversions will happen automatically.

       2.
               void Foo(int arg1, char* arg2, SV* arg3) {

           In this category you have a "void" return type. This means that either you want to return
           nothing, or that you want to return a list. In the latter case you'll need to push values onto
           the Stack yourself. There are a few Inline macros that make this easy. Code something like this:

               int i, max; SV* my_sv[10];
               Inline_Stack_Vars;
               Inline_Stack_Reset;
               for (i = 0; i < max; i++)
                 Inline_Stack_Push(my_sv[i]);
               Inline_Stack_Done;

           After resetting the Stack pointer, this code pushes a series of return values. At the end it uses
           "Inline_Stack_Done" to mark the end of the return stack.

           If you really want to return nothing, then don't use the "Inline_Stack_" macros. If you must use
           them, then set use "Inline_Stack_Void" at the end of your function.

       3.
               char* Foo(SV* arg1, ...) {

           In this category you have an unfixed number of arguments. This means that you'll have to pop
           values off the Stack yourself. Do it like this:

               int i;
               Inline_Stack_Vars;
               for (i = 0; i < Inline_Stack_Items; i++)
                 handle_sv(Inline_Stack_Item(i));

           The return type of Inline_Stack_Item(i) is "SV*".

       4.
               void* Foo(SV* arg1, ...) {

           In this category you have both a "void" return type and an unfixed number of arguments. Just
           combine the techniques from Categories 3 and 4.

Examples
       Here are a few examples. Each one is a complete program that you can try running yourself. For many
       more examples see Inline::C-Cookbook.

   Example #1 - Greetings
       This example will take one string argument (a name) and print a greeting. The function is called with
       a string and with a number. In the second case the number is forced to a string.

       Notice that you do not need to "#include <stdio.h">. The "perl.h" header file which gets included by
       default, automatically loads the standard C header files for you.

           use Inline C;
           greet('Ingy');
           greet(42);
           __END__
           __C__
           void greet(char* name) {
             printf("Hello %s!\n", name);
           }

   Example #2 - and Salutations
       This is similar to the last example except that the name is passed in as a "SV*" (pointer to Scalar
       Value) rather than a string ("char*"). That means we need to convert the "SV" to a string ourselves.
       This is accomplished using the "SvPVX" function which is part of the "Perl" internal API. See
       "perldoc perlapi" for more info.

       One problem is that "SvPVX" doesn't automatically convert strings to numbers, so we get a little
       surprise when we try to greet 42.  The program segfaults, a common occurence when delving into the
       guts of Perl.

           use Inline C;
           greet('Ingy');
           greet(42);
           __END__
           __C__
           void greet(SV* sv_name) {
             printf("Hello %s!\n", SvPVX(sv_name));
           }

   Example #3 - Fixing the problem
       We can fix the problem in Example #2 by using the "SvPV" function instead. This function will
       stringify the "SV" if it does not contain a string. "SvPV" returns the length of the string as it's
       second parameter. Since we don't care about the length, we can just put "PL_na" there, which is a
       special variable designed for that purpose.

           use Inline C;
           greet('Ingy');
           greet(42);
           __END__
           __C__
           void greet(SV* sv_name) {
             printf("Hello %s!\n", SvPV(sv_name, PL_na));
           }

SEE ALSO
       For general information about Inline see Inline.

       For sample programs using Inline with C see Inline::C-Cookbook.

       For information on supported languages and platforms see Inline-Support.

       For information on writing your own Inline Language Support Module, see Inline-API.

       Inline's mailing list is inline@perl.org

       To subscribe, send email to inline-subscribe@perl.org

BUGS AND DEFICIENCIES
       1.  If you use C function names that happen to be used internally by Perl, you will get a load error
           at run time. There is currently no functionality to prevent this or to warn you. For now, a list
           of Perl's internal symbols is packaged in the Inline module distribution under the filename
           'symbols.perl'. Avoid using these in your code.

AUTHOR
       Brian Ingerson <INGY@cpan.org>

       Sisyphus <sisyphus@cpan.org> fixed some bugs and is current co-maintainer.

COPYRIGHT
       Copyright (c) 2000-2002. Brian Ingerson.

       Copyright (c) 2008, 2010-2012. Sisyphus.

       This program is free software; you can redistribute it and/or modify it under the same terms as Perl
       itself.

       See http://www.perl.com/perl/misc/Artistic.html



perl v5.16.2                                     2012-10-08                                             C(3)