Страницы справочника OS X

Эта страница руководства является частью версии 5.0 Инструментов XCode

Читать страницы руководства

NEXT(3pm)                             Perl Programmers Reference Guide                             NEXT(3pm)



NAME
       NEXT.pm - Provide a pseudo-class NEXT (et al) that allows method redispatch

SYNOPSIS
           use NEXT;

           package A;
           sub A::method   { print "$_[0]: A method\n";   $_[0]->NEXT::method() }
           sub A::DESTROY  { print "$_[0]: A dtor\n";     $_[0]->NEXT::DESTROY() }

           package B;
           use base qw( A );
           sub B::AUTOLOAD { print "$_[0]: B AUTOLOAD\n"; $_[0]->NEXT::AUTOLOAD() }
           sub B::DESTROY  { print "$_[0]: B dtor\n";     $_[0]->NEXT::DESTROY() }

           package C;
           sub C::method   { print "$_[0]: C method\n";   $_[0]->NEXT::method() }
           sub C::AUTOLOAD { print "$_[0]: C AUTOLOAD\n"; $_[0]->NEXT::AUTOLOAD() }
           sub C::DESTROY  { print "$_[0]: C dtor\n";     $_[0]->NEXT::DESTROY() }

           package D;
           use base qw( B C );
           sub D::method   { print "$_[0]: D method\n";   $_[0]->NEXT::method() }
           sub D::AUTOLOAD { print "$_[0]: D AUTOLOAD\n"; $_[0]->NEXT::AUTOLOAD() }
           sub D::DESTROY  { print "$_[0]: D dtor\n";     $_[0]->NEXT::DESTROY() }

           package main;

           my $obj = bless {}, "D";

           $obj->method();             # Calls D::method, A::method, C::method
           $obj->missing_method(); # Calls D::AUTOLOAD, B::AUTOLOAD, C::AUTOLOAD

           # Clean-up calls D::DESTROY, B::DESTROY, A::DESTROY, C::DESTROY

DESCRIPTION
       NEXT.pm adds a pseudoclass named "NEXT" to any program that uses it. If a method "m" calls
       "$self->NEXT::m()", the call to "m" is redispatched as if the calling method had not originally been
       found.

       In other words, a call to "$self->NEXT::m()" resumes the depth-first, left-to-right search of $self's
       class hierarchy that resulted in the original call to "m".

       Note that this is not the same thing as "$self->SUPER::m()", which begins a new dispatch that is
       restricted to searching the ancestors of the current class. "$self->NEXT::m()" can backtrack past the
       current class -- to look for a suitable method in other ancestors of $self -- whereas
       "$self->SUPER::m()" cannot.

       A typical use would be in the destructors of a class hierarchy, as illustrated in the synopsis above.
       Each class in the hierarchy has a DESTROY method that performs some class-specific action and then
       redispatches the call up the hierarchy. As a result, when an object of class D is destroyed, the
       destructors of all its parent classes are called (in depth-first, left-to-right order).

       Another typical use of redispatch would be in "AUTOLOAD"'ed methods.  If such a method determined
       that it was not able to handle a particular call, it might choose to redispatch that call, in the
       hope that some other "AUTOLOAD" (above it, or to its left) might do better.

       By default, if a redispatch attempt fails to find another method elsewhere in the objects class
       hierarchy, it quietly gives up and does nothing (but see "Enforcing redispatch"). This gracious
       acquiescence is also unlike the (generally annoying) behaviour of "SUPER", which throws an exception
       if it cannot redispatch.

       Note that it is a fatal error for any method (including "AUTOLOAD") to attempt to redispatch any
       method that does not have the same name. For example:

               sub D::oops { print "oops!\n"; $_[0]->NEXT::other_method() }

   Enforcing redispatch
       It is possible to make "NEXT" redispatch more demandingly (i.e. like "SUPER" does), so that the
       redispatch throws an exception if it cannot find a "next" method to call.

       To do this, simple invoke the redispatch as:

               $self->NEXT::ACTUAL::method();

       rather than:

               $self->NEXT::method();

       The "ACTUAL" tells "NEXT" that there must actually be a next method to call, or it should throw an
       exception.

       "NEXT::ACTUAL" is most commonly used in "AUTOLOAD" methods, as a means to decline an "AUTOLOAD"
       request, but preserve the normal exception-on-failure semantics:

               sub AUTOLOAD {
                       if ($AUTOLOAD =~ /foo|bar/) {
                               # handle here
                       }
                       else {  # try elsewhere
                               shift()->NEXT::ACTUAL::AUTOLOAD(@_);
                       }
               }

       By using "NEXT::ACTUAL", if there is no other "AUTOLOAD" to handle the method call, an exception will
       be thrown (as usually happens in the absence of a suitable "AUTOLOAD").

   Avoiding repetitions
       If "NEXT" redispatching is used in the methods of a "diamond" class hierarchy:

               #     A   B
               #    / \ /
               #   C   D
               #    \ /
               #     E

               use NEXT;

               package A;
               sub foo { print "called A::foo\n"; shift->NEXT::foo() }

               package B;
               sub foo { print "called B::foo\n"; shift->NEXT::foo() }

               package C; @ISA = qw( A );
               sub foo { print "called C::foo\n"; shift->NEXT::foo() }

               package D; @ISA = qw(A B);
               sub foo { print "called D::foo\n"; shift->NEXT::foo() }

               package E; @ISA = qw(C D);
               sub foo { print "called E::foo\n"; shift->NEXT::foo() }

               E->foo();

       then derived classes may (re-)inherit base-class methods through two or more distinct paths (e.g. in
       the way "E" inherits "A::foo" twice -- through "C" and "D"). In such cases, a sequence of "NEXT"
       redispatches will invoke the multiply inherited method as many times as it is inherited. For example,
       the above code prints:

               called E::foo
               called C::foo
               called A::foo
               called D::foo
               called A::foo
               called B::foo

       (i.e. "A::foo" is called twice).

       In some cases this may be the desired effect within a diamond hierarchy, but in others (e.g. for
       destructors) it may be more appropriate to call each method only once during a sequence of
       redispatches.

       To cover such cases, you can redispatch methods via:

               $self->NEXT::DISTINCT::method();

       rather than:

               $self->NEXT::method();

       This causes the redispatcher to only visit each distinct "method" method once. That is, to skip any
       classes in the hierarchy that it has already visited during redispatch. So, for example, if the
       previous example were rewritten:

               package A;
               sub foo { print "called A::foo\n"; shift->NEXT::DISTINCT::foo() }

               package B;
               sub foo { print "called B::foo\n"; shift->NEXT::DISTINCT::foo() }

               package C; @ISA = qw( A );
               sub foo { print "called C::foo\n"; shift->NEXT::DISTINCT::foo() }

               package D; @ISA = qw(A B);
               sub foo { print "called D::foo\n"; shift->NEXT::DISTINCT::foo() }

               package E; @ISA = qw(C D);
               sub foo { print "called E::foo\n"; shift->NEXT::DISTINCT::foo() }

               E->foo();

       then it would print:

               called E::foo
               called C::foo
               called A::foo
               called D::foo
               called B::foo

       and omit the second call to "A::foo" (since it would not be distinct from the first call to
       "A::foo").

       Note that you can also use:

               $self->NEXT::DISTINCT::ACTUAL::method();

       or:

               $self->NEXT::ACTUAL::DISTINCT::method();

       to get both unique invocation and exception-on-failure.

       Note that, for historical compatibility, you can also use "NEXT::UNSEEN" instead of "NEXT::DISTINCT".

   Invoking all versions of a method with a single call
       Yet another pseudo-class that NEXT.pm provides is "EVERY".  Its behaviour is considerably simpler
       than that of the "NEXT" family.  A call to:

               $obj->EVERY::foo();

       calls every method named "foo" that the object in $obj has inherited.  That is:

               use NEXT;

               package A; @ISA = qw(B D X);
               sub foo { print "A::foo " }

               package B; @ISA = qw(D X);
               sub foo { print "B::foo " }

               package X; @ISA = qw(D);
               sub foo { print "X::foo " }

               package D;
               sub foo { print "D::foo " }

               package main;

               my $obj = bless {}, 'A';
               $obj->EVERY::foo();        # prints" A::foo B::foo X::foo D::foo

       Prefixing a method call with "EVERY::" causes every method in the object's hierarchy with that name
       to be invoked. As the above example illustrates, they are not called in Perl's usual "left-most-depth-first" "left-mostdepth-first"
       depth-first" order. Instead, they are called "breadth-first-dependency-wise".

       That means that the inheritance tree of the object is traversed breadth-first and the resulting order
       of classes is used as the sequence in which methods are called. However, that sequence is modified by
       imposing a rule that the appropriate method of a derived class must be called before the same method
       of any ancestral class. That's why, in the above example, "X::foo" is called before "D::foo", even
       though "D" comes before "X" in @B::ISA.

       In general, there's no need to worry about the order of calls. They will be left-to-right, breadth-first, breadthfirst,
       first, most-derived-first. This works perfectly for most inherited methods (including destructors),
       but is inappropriate for some kinds of methods (such as constructors, cloners, debuggers, and
       initializers) where it's more appropriate that the least-derived methods be called first (as more-derived morederived
       derived methods may rely on the behaviour of their "ancestors"). In that case, instead of using the
       "EVERY" pseudo-class:

               $obj->EVERY::foo();        # prints" A::foo B::foo X::foo D::foo

       you can use the "EVERY::LAST" pseudo-class:

               $obj->EVERY::LAST::foo();  # prints" D::foo X::foo B::foo A::foo

       which reverses the order of method call.

       Whichever version is used, the actual methods are called in the same context (list, scalar, or void)
       as the original call via "EVERY", and return:

       •   A hash of array references in list context. Each entry of the hash has the fully qualified method
           name as its key and a reference to an array containing the method's list-context return values as
           its value.

       •   A reference to a hash of scalar values in scalar context. Each entry of the hash has the fully
           qualified method name as its key and the method's scalar-context return values as its value.

       •   Nothing in void context (obviously).

   Using "EVERY" methods
       The typical way to use an "EVERY" call is to wrap it in another base method, that all classes
       inherit. For example, to ensure that every destructor an object inherits is actually called (as
       opposed to just the left-most-depth-first-est one):

               package Base;
               sub DESTROY { $_[0]->EVERY::Destroy }

               package Derived1;
               use base 'Base';
               sub Destroy {...}

               package Derived2;
               use base 'Base', 'Derived1';
               sub Destroy {...}

       et cetera. Every derived class than needs its own clean-up behaviour simply adds its own "Destroy"
       method (not a "DESTROY" method), which the call to "EVERY::LAST::Destroy" in the inherited destructor
       then correctly picks up.

       Likewise, to create a class hierarchy in which every initializer inherited by a new object is
       invoked:

               package Base;
               sub new {
                       my ($class, %args) = @_;
                       my $obj = bless {}, $class;
                       $obj->EVERY::LAST::Init(\%args);
               }

               package Derived1;
               use base 'Base';
               sub Init {
                       my ($argsref) = @_;
                       ...
               }

               package Derived2;
               use base 'Base', 'Derived1';
               sub Init {
                       my ($argsref) = @_;
                       ...
               }

       et cetera. Every derived class than needs some additional initialization behaviour simply adds its
       own "Init" method (not a "new" method), which the call to "EVERY::LAST::Init" in the inherited
       constructor then correctly picks up.

AUTHOR
       Damian Conway (damian@conway.org)

BUGS AND IRRITATIONS
       Because it's a module, not an integral part of the interpreter, NEXT.pm has to guess where the
       surrounding call was found in the method look-up sequence. In the presence of diamond inheritance
       patterns it occasionally guesses wrong.

       It's also too slow (despite caching).

       Comment, suggestions, and patches welcome.

COPYRIGHT
        Copyright (c) 2000-2001, Damian Conway. All Rights Reserved.
        This module is free software. It may be used, redistributed
           and/or modified under the same terms as Perl itself.



perl v5.16.2                                     2012-10-11                                        NEXT(3pm)