Страницы справочника OS X

Эта страница руководства для  версии 10.9 Mac OS X

Читать страницы руководства

Params::Validate(3)                  User Contributed Perl Documentation                 Params::Validate(3)



NAME
       Params::Validate - Validate method/function parameters

VERSION
       version 1.00

SYNOPSIS
           use Params::Validate qw(:all);

           # takes named params (hash or hashref)
           sub foo {
               validate(
                   @_, {
                       foo => 1,    # mandatory
                       bar => 0,    # optional
                   }
               );
           }

           # takes positional params
           sub bar {
               # first two are mandatory, third is optional
               validate_pos( @_, 1, 1, 0 );
           }

           sub foo2 {
               validate(
                   @_, {
                       foo =>
                           # specify a type
                           { type => ARRAYREF },
                       bar =>
                           # specify an interface
                           { can => [ 'print', 'flush', 'frobnicate' ] },
                       baz => {
                           type      => SCALAR,     # a scalar ...
                                                    # ... that is a plain integer ...
                           regex     => qr/^\d+$/,
                           callbacks => {           # ... and smaller than 90
                               'less than 90' => sub { shift() < 90 },
                           },
                       }
                   }
               );
           }

           sub with_defaults {
               my %p = validate(
                   @_, {
                       # required
                       foo => 1,
                       # $p{bar} will be 99 if bar is not given.  bar is now
                       # optional.
                       bar => { default => 99 }
                   }
               );
           }

           sub pos_with_defaults {
               my @p = validate_pos( @_, 1, { default => 99 } );
           }

           sub sets_options_on_call {
               my %p = validate_with(
                   params => \@_,
                   spec   => { foo => { type => SCALAR, default => 2 } },
                   normalize_keys => sub { $_[0] =~ s/^-//; lc $_[0] },
               );
           }

DESCRIPTION
       The Params::Validate module allows you to validate method or function call parameters to an arbitrary
       level of specificity.  At the simplest level, it is capable of validating the required parameters
       were given and that no unspecified additional parameters were passed in.

       It is also capable of determining that a parameter is of a specific type, that it is an object of a
       certain class hierarchy, that it possesses certain methods, or applying validation callbacks to
       arguments.

   EXPORT
       The module always exports the "validate()" and "validate_pos()" functions.

       It also has an additional function available for export, "validate_with", which can be used to
       validate any type of parameters, and set various options on a per-invocation basis.

       In addition, it can export the following constants, which are used as part of the type checking.
       These are "SCALAR", "ARRAYREF", "HASHREF", "CODEREF", "GLOB", "GLOBREF", and "SCALARREF", "UNDEF",
       "OBJECT", "BOOLEAN", and "HANDLE".  These are explained in the section on Type Validation.

       The constants are available via the export tag ":types".  There is also an ":all" tag which includes
       all of the constants as well as the "validation_options()" function.

PARAMETER VALIDATION
       The validation mechanisms provided by this module can handle both named or positional parameters.
       For the most part, the same features are available for each.  The biggest difference is the way that
       the validation specification is given to the relevant subroutine.  The other difference is in the
       error messages produced when validation checks fail.

       When handling named parameters, the module will accept either a hash or a hash reference.

       Subroutines expecting named parameters should call the "validate()" subroutine like this:

           validate(
               @_, {
                   parameter1 => validation spec,
                   parameter2 => validation spec,
                   ...
               }
           );

       Subroutines expecting positional parameters should call the "validate_pos()" subroutine like this:

           validate_pos( @_, { validation spec }, { validation spec } );

   Mandatory/Optional Parameters
       If you just want to specify that some parameters are mandatory and others are optional, this can be
       done very simply.

       For a subroutine expecting named parameters, you would do this:

           validate( @_, { foo => 1, bar => 1, baz => 0 } );

       This says that the "foo" and "bar" parameters are mandatory and that the "baz" parameter is optional.
       The presence of any other parameters will cause an error.

       For a subroutine expecting positional parameters, you would do this:

           validate_pos( @_, 1, 1, 0, 0 );

       This says that you expect at least 2 and no more than 4 parameters.  If you have a subroutine that
       has a minimum number of parameters but can take any maximum number, you can do this:

           validate_pos( @_, 1, 1, (0) x (@_ - 2) );

       This will always be valid as long as at least two parameters are given.  A similar construct could be
       used for the more complex validation parameters described further on.

       Please note that this:

           validate_pos( @_, 1, 1, 0, 1, 1 );

       makes absolutely no sense, so don't do it.  Any zeros must come at the end of the validation
       specification.

       In addition, if you specify that a parameter can have a default, then it is considered optional.

   Type Validation
       This module supports the following simple types, which can be exported as constants:

       •   SCALAR

           A scalar which is not a reference, such as 10 or 'hello'.  A parameter that is undefined is not
           treated as a scalar.  If you want to allow undefined values, you will have to specify "SCALAR |
           UNDEF".

       •   ARRAYREF

           An array reference such as "[1, 2, 3]" or "\@foo".

       •   HASHREF

           A hash reference such as "{ a => 1, b => 2 }" or "\%bar".

       •   CODEREF

           A subroutine reference such as "\&foo_sub" or "sub { print "hello" }".

       •   GLOB

           This one is a bit tricky.  A glob would be something like *FOO, but not "\*FOO", which is a glob
           reference.  It should be noted that this trick:

               my $fh = do { local *FH; };

           makes $fh a glob, not a glob reference.  On the other hand, the return value from
           "Symbol::gensym" is a glob reference.  Either can be used as a file or directory handle.

       •   GLOBREF

           A glob reference such as "\*FOO".  See the GLOB entry above for more details.

       •   SCALARREF

           A reference to a scalar such as "\$x".

       •   UNDEF

           An undefined value

       •   OBJECT

           A blessed reference.

       •   BOOLEAN

           This is a special option, and is just a shortcut for "UNDEF | SCALAR".

       •   HANDLE

           This option is also special, and is just a shortcut for "GLOB | GLOBREF".  However, it seems
           likely that most people interested in either globs or glob references are likely to really be
           interested in whether the parameter in question could be a valid file or directory handle.

       To specify that a parameter must be of a given type when using named parameters, do this:

           validate(
               @_, {
                   foo => { type => SCALAR },
                   bar => { type => HASHREF }
               }
           );

       If a parameter can be of more than one type, just use the bitwise or ("|") operator to combine them.

           validate( @_, { foo => { type => GLOB | GLOBREF } );

       For positional parameters, this can be specified as follows:

           validate_pos( @_, { type => SCALAR | ARRAYREF }, { type => CODEREF } );

   Interface Validation
       To specify that a parameter is expected to have a certain set of methods, we can do the following:

           validate(
               @_, {
                   foo =>
                       # just has to be able to ->bar
                       { can => 'bar' }
               }
           );

        ... or ...

           validate(
               @_, {
                   foo =>
                       # must be able to ->bar and ->print
                       { can => [qw( bar print )] }
               }
           );

   Class Validation
       A word of warning.  When constructing your external interfaces, it is probably better to specify what
       methods you expect an object to have rather than what class it should be of (or a child of).  This
       will make your API much more flexible.

       With that said, if you want to validate that an incoming parameter belongs to a class (or child
       class) or classes, do:

           validate(
               @_,
               { foo => { isa => 'My::Frobnicator' } }
           );

        ... or ...

           validate(
               @_,
               # must be both, not either!
               { foo => { isa => [qw( My::Frobnicator IO::Handle )] } }
           );

   Regex Validation
       If you want to specify that a given parameter must match a specific regular expression, this can be
       done with "regex" spec key.  For example:

           validate(
               @_,
               { foo => { regex => qr/^\d+$/ } }
           );

       The value of the "regex" key may be either a string or a pre-compiled regex created via "qr".

       If the value being checked against a regex is undefined, the regex is explicitly checked against the
       empty string ('') instead, in order to avoid "Use of uninitialized value" warnings.

       The "Regexp::Common" module on CPAN is an excellent source of regular expressions suitable for
       validating input.

   Callback Validation
       If none of the above are enough, it is possible to pass in one or more callbacks to validate the
       parameter.  The callback will be given the value of the parameter as its first argument.  Its second
       argument will be all the parameters, as a reference to either a hash or array.  Callbacks are
       specified as hash reference.  The key is an id for the callback (used in error messages) and the
       value is a subroutine reference, such as:

           validate(
               @_, {
                   foo => {
                       callbacks => {
                           'smaller than a breadbox' => sub { shift() < $breadbox },
                           'green or blue' =>
                               sub { $_[0] eq 'green' || $_[0] eq 'blue' }
                       }
                   }
               );

           validate(
               @_, {
                   foo => {
                       callbacks => {
                           'bigger than baz' => sub { $_[0] > $_[1]->{baz} }
                       }
                   }
               }
           );

   Untainting
       If you want values untainted, set the "untaint" key in a spec hashref to a true value, like this:

           my %p = validate(
               @_, {
                   foo => { type => SCALAR, untaint => 1 },
                   bar => { type => ARRAYREF }
               }
           );

       This will untaint the "foo" parameter if the parameters are valid.

       Note that untainting is only done if all parameters are valid.  Also, only the return values are
       untainted, not the original values passed into the validation function.

       Asking for untainting of a reference value will not do anything, as "Params::Validate" will only
       attempt to untaint the reference itself.

   Mandatory/Optional Revisited
       If you want to specify something such as type or interface, plus the fact that a parameter can be
       optional, do this:

           validate(
               @_, {
                   foo => { type => SCALAR },
                   bar => { type => ARRAYREF, optional => 1 }
               }
           );

       or this for positional parameters:

           validate_pos(
               @_,
               { type => SCALAR },
               { type => ARRAYREF, optional => 1 }
           );

       By default, parameters are assumed to be mandatory unless specified as optional.

   Dependencies
       It also possible to specify that a given optional parameter depends on the presence of one or more
       other optional parameters.

           validate(
               @_, {
                   cc_number => {
                       type     => SCALAR,
                       optional => 1,
                       depends  => [ 'cc_expiration', 'cc_holder_name' ],
                   },
                   cc_expiration  { type => SCALAR, optional => 1 },
                   cc_holder_name { type => SCALAR, optional => 1 },
               }
           );

       In this case, "cc_number", "cc_expiration", and "cc_holder_name" are all optional.  However, if
       "cc_number" is provided, then "cc_expiration" and "cc_holder_name" must be provided as well.

       This allows you to group together sets of parameters that all must be provided together.

       The "validate_pos()" version of dependencies is slightly different, in that you can only depend on
       one other parameter.  Also, if for example, the second parameter 2 depends on the fourth parameter,
       then it implies a dependency on the third parameter as well.  This is because if the fourth parameter
       is required, then the user must also provide a third parameter so that there can be four parameters
       in total.

       "Params::Validate" will die if you try to depend on a parameter not declared as part of your
       parameter specification.

   Specifying defaults
       If the "validate()" or "validate_pos()" functions are called in a list context, they will return a
       hash or containing the original parameters plus defaults as indicated by the validation spec.

       If the function is not called in a list context, providing a default in the validation spec still
       indicates that the parameter is optional.

       The hash or array returned from the function will always be a copy of the original parameters, in
       order to leave @_ untouched for the calling function.

       Simple examples of defaults would be:

           my %p = validate( @_, { foo => 1, bar => { default => 99 } } );

           my @p = validate_pos( @_, 1, { default => 99 } );

       In scalar context, a hash reference or array reference will be returned, as appropriate.

USAGE NOTES
   Validation failure
       By default, when validation fails "Params::Validate" calls "Carp::confess()".  This can be overridden
       by setting the "on_fail" option, which is described in the "GLOBAL" OPTIONS section.

   Method calls
       When using this module to validate the parameters passed to a method call, you will probably want to
       remove the class/object from the parameter list before calling "validate()" or "validate_pos()".  If
       your method expects named parameters, then this is necessary for the "validate()" function to
       actually work, otherwise @_ will not be usable as a hash, because it will first have your object (or
       class) followed by a set of keys and values.

       Thus the idiomatic usage of "validate()" in a method call will look something like this:

           sub method {
               my $self = shift;

               my %params = validate(
                   @_, {
                       foo => 1,
                       bar => { type => ARRAYREF },
                   }
               );
           }

   Speeding Up Validation
       In most cases, the validation spec will remain the same for each call to a subroutine. In that case,
       you can speed up validation by defining the validation spec just once, rather than on each call to
       the subroutine:

           my %spec = ( ... );
           sub foo {
               my %params = validate( @_, \%spec );
           }

       You can also use the "state" feature to do this:

           use feature 'state';

           sub foo {
               state %spec = ( ... );
               my %params = validate( @_, \%spec );
           }

"GLOBAL" OPTIONS
       Because the API for the "validate()" and "validate_pos()" functions does not make it possible to
       specify any options other than the validation spec, it is possible to set some options as
       pseudo-'globals'.  These allow you to specify such things as whether or not the validation of named
       parameters should be case sensitive, for one example.

       These options are called pseudo-'globals' because these settings are only applied to calls
       originating from the package that set the options.

       In other words, if I am in package "Foo" and I call "validation_options()", those options are only in
       effect when I call "validate()" from package "Foo".

       While this is quite different from how most other modules operate, I feel that this is necessary in
       able to make it possible for one module/application to use Params::Validate while still using other
       modules that also use Params::Validate, perhaps with different options set.

       The downside to this is that if you are writing an app with a standard calling style for all
       functions, and your app has ten modules, each module must include a call to "validation_options()".
       You could of course write a module that all your modules use which uses various trickery to do this
       when imported.

   Options
       •   normalize_keys => $callback

           This option is only relevant when dealing with named parameters.

           This callback will be used to transform the hash keys of both the parameters and the parameter
           spec when "validate()" or "validate_with()" are called.

           Any alterations made by this callback will be reflected in the parameter hash that is returned by
           the validation function.  For example:

               sub foo {
                   return validate_with(
                       params => \@_,
                       spec   => { foo => { type => SCALAR } },
                       normalize_keys =>
                           sub { my $k = shift; $k =~ s/^-//; return uc $k },
                   );

               }

               %p = foo( foo => 20 );

               # $p{FOO} is now 20

               %p = foo( -fOo => 50 );

               # $p{FOO} is now 50

           The callback must return a defined value.

           If a callback is given then the deprecated "ignore_case" and "strip_leading" options are ignored.

       •   allow_extra => $boolean

           If true, then the validation routine will allow extra parameters not named in the validation
           specification.  In the case of positional parameters, this allows an unlimited number of maximum
           parameters (though a minimum may still be set).  Defaults to false.

       •   on_fail => $callback

           If given, this callback will be called whenever a validation check fails.  It will be called with
           a single parameter, which will be a string describing the failure.  This is useful if you wish to
           have this module throw exceptions as objects rather than as strings, for example.

           This callback is expected to "die()" internally.  If it does not, the validation will proceed
           onwards, with unpredictable results.

           The default is to simply use the Carp module's "confess()" function.

       •   stack_skip => $number

           This tells Params::Validate how many stack frames to skip when finding a subroutine name to use
           in error messages.  By default, it looks one frame back, at the immediate caller to "validate()"
           or "validate_pos()".  If this option is set, then the given number of frames are skipped instead.

       •   ignore_case => $boolean

           DEPRECATED

           This is only relevant when dealing with named parameters.  If it is true, then the validation
           code will ignore the case of parameter names.  Defaults to false.

       •   strip_leading => $characters

           DEPRECATED

           This too is only relevant when dealing with named parameters.  If this is given then any
           parameters starting with these characters will be considered equivalent to parameters without
           them entirely.  For example, if this is specified as '-', then "-foo" and "foo" would be
           considered identical.

PER-INVOCATION OPTIONS
       The "validate_with()" function can be used to set the options listed above on a per-invocation basis.
       For example:

           my %p = validate_with(
               params => \@_,
               spec   => {
                   foo => { type    => SCALAR },
                   bar => { default => 10 }
               },
               allow_extra => 1,
           );

       In addition to the options listed above, it is also possible to set the option "called", which should
       be a string.  This string will be used in any error messages caused by a failure to meet the
       validation spec.

       This subroutine will validate named parameters as a hash if the "spec" parameter is a hash reference.
       If it is an array reference, the parameters are assumed to be positional.

           my %p = validate_with(
               params => \@_,
               spec   => {
                   foo => { type    => SCALAR },
                   bar => { default => 10 }
               },
               allow_extra => 1,
               called      => 'The Quux::Baz class constructor',
           );

           my @p = validate_with(
               params => \@_,
               spec   => [
                   { type    => SCALAR },
                   { default => 10 }
               ],
               allow_extra => 1,
               called      => 'The Quux::Baz class constructor',
           );

DISABLING VALIDATION
       If the environment variable "PERL_NO_VALIDATION" is set to something true, then validation is turned
       off.  This may be useful if you only want to use this module during development but don't want the
       speed hit during production.

       The only error that will be caught will be when an odd number of parameters are passed into a
       function/method that expects a hash.

       If you want to selectively turn validation on and off at runtime, you can directly set the
       $Params::Validate::NO_VALIDATION global variable.  It is strongly recommended that you localize any
       changes to this variable, because other modules you are using may expect validation to be on when
       they execute.  For example:

           {
               local $Params::Validate::NO_VALIDATION = 1;

               # no error
               foo( bar => 2 );
           }

           # error
           foo( bar => 2 );

           sub foo {
               my %p = validate( @_, { foo => 1 } );
               ...;
           }

       But if you want to shoot yourself in the foot and just turn it off, go ahead!

LIMITATIONS
       Right now there is no way (short of a callback) to specify that something must be of one of a list of
       classes, or that it must possess one of a list of methods.  If this is desired, it can be added in
       the future.

       Ideally, there would be only one validation function.  If someone figures out how to do this, please
       let me know.

SUPPORT
       Please submit bugs and patches to the CPAN RT system at
       http://rt.cpan.org/NoAuth/ReportBug.html?Queue=Params%3A%3AValidate or via email at
       bug-params-validate@rt.cpan.org.

       Support questions can be sent to Dave at autarch@urth.org.

       The code repository is at http://hg.urth.org/hg/Params-Validate

DONATIONS
       If you'd like to thank me for the work I've done on this module, please consider making a "donation"
       to me via PayPal. I spend a lot of free time creating free software, and would appreciate any support
       you'd care to offer.

       Please note that I am not suggesting that you must do this in order for me to continue working on
       this particular software. I will continue to do so, inasmuch as I have in the past, for as long as it
       interests me.

       Similarly, a donation made in this way will probably not make me work on this software much more,
       unless I get so many donations that I can consider working on free software full time, which seems
       unlikely at best.

       To donate, log into PayPal and send money to autarch@urth.org or use the button on this page:
       http://www.urth.org/~autarch/fs-donation.html <http://www.urth.org/~autarch/fs-donation.html>

AUTHOR
       Dave Rolsky, <autarch@urth.org> and Ilya Martynov <ilya@martynov.org>

COPYRIGHT AND LICENSE
       This software is Copyright (c) 2011 by Dave Rolsky and Ilya Martynov.

       This is free software, licensed under:

         The Artistic License 2.0 (GPL Compatible)



perl v5.12.5                                     2013-08-25                              Params::Validate(3)