Страницы справочника OS X

Эта страница руководства для  версии 10.9 Mac OS X

Читать страницы руководства

Reliable(3)                          User Contributed Perl Documentation                         Reliable(3)



NAME
       Proc::Reliable -- Run external processes reliably with many options.

SYNOPSIS
       use Proc::Reliable;

       Create a new process object

          $myproc = Proc::Reliable->new();

       Run a subprocess and collect its output

          $output = $myproc->run("/bin/ls -l");

       Check for problems

          if($myproc->status()) {
            print("problem!\n");
          }

       Run another subprocess, keeping stdout and stderr separated.  Also, send the subprocess some data on
       stdin.

          $msg = "Hello World\n");
          $p->want_single_list(0);
          $stdout = $p->run("/usr/bin/fastmail - foo@bar.com", $msg);
          if($p->status()) {
            print("problem: ", $p->stderr(), "\n");
          }

       Another way to get output

          ($stdout, $stderr, $status, $msg) = $p->run("/bin/ls -l");

OPTIONS
       Run Modes

        $p->run("shell-command-line");  # Launch a shell process
        $p->run("cmdline", "data");     # Launch a shell process with stdin data
        $p->run(["cmd", "arg1", ...]);  # Bypass shell processing of arguments
        $p->run(sub { ... });           # Launch a perl subroutine
        $p->run(\&subroutine);          # Launch a perl subroutine

       Option settings below represent defaults

        $p->num_tries(1);           # execute the program only once
        $p->time_per_try(60);       # time per try 60 sec
        $p->maxtime(60);            # set overall timeout
        $p->time_btw_tries(5);      # time between tries 5 sec
        $p->want_single_list();     # return STDOUT and STDERR together
        $p->accept_no_error();      # Re-try if any STDERR output
        $p->pattern_stdout($pat);   # require STDOUT to match regex $pat
        $p->pattern_stderr($pat);   # require STDERR to match regex $pat
        $p->allow_shell(1);         # allowed to use shell for operation
        $p->child_exit_time(1.0);   # timeout for child to exit after it closes stdout
        $p->sigterm_exit_time(0.5); # timeout for child to exit after sigterm
        $p->sigkill_exit_time(0.5); # timeout for child to exit after sigkill
        $p->input_chunking(0);      # feed stdin data line-by-line to subprocess
        $p->stdin_error_ok(0);      # ok if child exits without reading all stdin
        $p->stdout_cb(undef);       # callback function for line-by-line stdout
        $p->stderr_cb(undef);       # callback function for line-by-line stderr

       Getting output

        $out = $p->stdout();        # stdout produced by last run()
        $err = $p->stderr();        # stderr produced by last run()
        $stat = $p->status();       # exit code produced by last run()
        $msg = $p->msg();           # module messages produced by last run()

       Debug

       Proc::Reliable::debug($level);         # Turn debug on

OVERVIEW
       Proc::Reliable is a class for simple, reliable and configurable subprocess execution in perl.  In
       particular, it is especially useful for managing the execution of 'problem' programs which are likely
       to fail, hang, or otherwise behave in an unruly manner.

       Proc::Reliable includes all the functionality of the backticks operator and system() functions, plus
       many common uses of fork() and exec(), open2() and open3().  Proc::Reliable incorporates a number of
       options, including sending data to the subprocess on STDIN, collecting STDOUT and STDERR separately
       or together, killing hung processes, timouts and automatic retries.

DESCRIPTION
       A new process object is created by

          $myproc = Proc::Reliable->new();

       The default will run a subprocess only once with a 60-second timeout.  Either shell-like command
       lines or references to perl subroutines can be specified for launching a process in background.  A
       simple list process, for example, can be started via the shell as

          $out = $myproc->run("ls");

       To separate stdout, stderr, and exit status:

          ($out, $err, $status, $msg) = $myproc->run("ls");

       The output data is also stored within the $myproc object for later retrieval.  You can also run a
       perl subroutine in a subprocess, with

          $myproc->run(sub { return <*>; });

       The run Method will try to run the named process.  If the process times out (after time_per_try
       seconds) or has an error defined as unacceptable and you would like to re-run it, you can use the
       num_tries option.  Use the time_btw_tries option to set the number of seconds between runs.  This can
       repeat until maxtime seconds have elapsed.

       When using num_tries, the user can specify what constitutes an unacceptable error of STDOUT or STDERR
       output -- i.e. demanding a retry.  One common shorthand is to have the run method retry if there is
       any return from STDERR.

          $myproc->accept_no_error();    # Re-try if any STDERR
          $myproc->pattern_stdout($pat); # require STDOUT to match regex $pat
          $myproc->pattern_stderr($pat); # require STDERR to match regex $pat

       Subprocess completion is detected when the process closes all filehandles.  The process must then
       exit before child_exit_time expires, or it will be killed.  If the subprocess does not exit, it is
       sent a TERM signal unless sigterm_exit_time is 0.  then if it does not exit before sigterm_exit_time
       expires, it is sent a KILL signal unless sigkill_exit_time is 0.  then if it does not exit before
       sigkill_exit_time expires an error is generated.  waiting is done in 0.01 second increments.

       Proc::Reliable is not MT-Safe due to signals usage.

METHODS
       The following methods are available:

       new (Constructor)
           Create a new instance of this class by writing either

               $proc = new Proc::Reliable;   or   $proc = Proc::Reliable->new();

           The new method accepts any valid configuration options:

               $proc = Proc::Reliable->new('maxtime' => 200, 'num_tries' => 3);

       run Run a new process and collect the standard output and standard error via separate pipes.

             $out = $proc->run("program-name");
            ($out, $err, $status, $msg) = $proc->run("program-name");

           by default with a single return value, stdout and stderr are combined to a single stream and
           returned.  with 4 return values, stdout and stderr are separated, and the program exit status is
           also returned.  $msg contains messages from Proc::Reliable when errors occur.  Set
           want_single_list(1) to force stdout and stderr to be combined, and want_single_list(0) to force
           them separated.  The results from run() are stored as member data also:

             $proc->want_single_list(0);
             $proc->run("program");
             if($proc->status) {
               print($proc->stderr);
               exit;
             }
             else {
               print($proc->stdout);
             }

           Program exit status is returned in the same format as exec(): bits 0-7 set if program exited from
           a signal, bits 8-15 are the exit status on a normal program exit.

           You can also set up callbacks to run a function of your choice as each line of stdout and stderr
           is produced by the child process using the stdout_cb and stderr_cb options.

           There are a number of other options.  You can also feed the forked program data on stdin via a
           second argument to run():

            $myinput = "hello\ntest\n";
            $output = $proc->run("program-name", $myinput);

           The first option to run() supports three forms: 1) string containing command string to execute.
           this incurs shell parsing.  2) arrayref containing split command string to execute.  this
           bypasses shell parsing.  3) coderef to perl function.  The first two options are executed via
           exec(), so the specifics of incurring shell parsing are the same.

           The second option to run() supports two forms: 1) string containing data to feed on stdin 2)
           stringref pointing to data to feed on stdin

           You can start execution of an independent Perl function (like "eval" except with timeout,
           retries, etc.).  Simply provide the function reference like

            $output = $proc->run(\&perl_function);

           or supply an unnamed subroutine:

            $output = $proc->run( sub { sleep(1) } );

           The run Method returns after the the function finishes, one way or another.

       debug
           Switches debug messages on and off -- Proc::Reliable::debug(1) switches them on,
           Proc::Reliable::debug(0) keeps Proc::Reliable quiet.

       maxtime
           Return or set the maximum time in seconds per run method call.  Default is 300 seconds (i.e. 5
           minutes).

       num_tries
           Return or set the maximum number of tries the run method will attempt an operation if there are
           unallowed errors.  Default is 5.

       time_per_try
           Return or set the maximum time in seconds for each attempt which run makes of an operation.
           Multiple tries in case of error can go longer than this.  Default is 30 seconds.

       time_btw_tries
           Return or set the time in seconds between attempted operations in case of unacceptable error.
           Default is 5 seconds.

       child_exit_time
           When the subprocess closes stdout, it is assumed to have completed normal operation.  It is
           expected to exit within the amount of time specified.  If it does not exit, it will be killed
           (with SIGTERM).  This option can be disabled by setting to '0'.  Values are in seconds, with a
           resolution of 0.01.

       sigterm_exit_time
           If the time_per_try or max_time has been exceeded, or if child_exit_time action has not
           succeeded, the subprocess will be killed with SIGTERM.  This option specifies the amount of time
           to allow the process to exit after closing stdout.  This option can be disabled by setting to
           '0'.  Values are in seconds, with a resolution of 0.01.

       sigkill_exit_time
           Similar to sigterm_exit_time, but a SIGKILL is sent instead of a SIGTERM.  When both options are
           enabled, the SIGTERM is sent first and SIGKILL is then sent after the specified time only if the
           subprocess is still alive.  This option can be disabled by setting to '0'.  Values are in
           seconds, with a resolution of 0.01.

       input_chunking
           If data is being written to the subprocess on stdin, this option will cause the module to split()
           the input data at linefeeds, and only feed the subprocess a line at a time.  This option
           typically would be used when the subprocess is an application with a command prompt and does not
           work properly when all the data is fed on stdin at once.  The module will feed the subprocess one
           line of data on stdin, and will then wait until some data is produced by the subprocess on stdout
           or stderr.  It will then feed the next line of data on stdin.

       stdout_cb
           Set up a callback function to get stdout data from the child line-by-line.  The function you
           supply will be called whenever the child prints a line onto stdout.  This is the only way to get
           output from the child while it is still running, the normal method will give you all the output
           at once after the child exits.

       stderr_cb
           Similar to stdout_cb for stderr data.

REQUIREMENTS
       I recommend using at least perl 5.003.

AUTHORS
       Proc::Reliable by Dan Goldwater <dgold at zblob dot com>

       Based on Proc::Short, written by John Hanju Kim <jhkim@fnal.gov>.

       Contributions by Stephen Cope and Jason Robertson.

COPYRIGHT
       Copyright 2001 by Dan Goldwater, all rights reserved.  Copyright 1999 by John Hanju Kim, all rights
       reserved.

       This program is free software, you can redistribute it and/or modify it under the same terms as Perl
       itself.

POD ERRORS
       Hey! The above document had some coding errors, which are explained below:

       Around line 907:
           You forgot a '=back' before '=head1'



perl v5.12.5                                     2003-11-23                                      Reliable(3)