Страницы справочника OS X

Эта страница руководства является частью версии 5.0 Инструментов XCode

Читать страницы руководства

XSLoader(3pm)                         Perl Programmers Reference Guide                         XSLoader(3pm)



NAME
       XSLoader - Dynamically load C libraries into Perl code

VERSION
       Version 0.15

SYNOPSIS
           package YourPackage;
           require XSLoader;

           XSLoader::load();

DESCRIPTION
       This module defines a standard simplified interface to the dynamic linking mechanisms available on
       many platforms.  Its primary purpose is to implement cheap automatic dynamic loading of Perl modules.

       For a more complicated interface, see DynaLoader.  Many (most) features of "DynaLoader" are not
       implemented in "XSLoader", like for example the "dl_load_flags", not honored by "XSLoader".

   Migration from "DynaLoader"
       A typical module using DynaLoader starts like this:

           package YourPackage;
           require DynaLoader;

           our @ISA = qw( OnePackage OtherPackage DynaLoader );
           our $VERSION = '0.01';
           bootstrap YourPackage $VERSION;

       Change this to

           package YourPackage;
           use XSLoader;

           our @ISA = qw( OnePackage OtherPackage );
           our $VERSION = '0.01';
           XSLoader::load 'YourPackage', $VERSION;

       In other words: replace "require DynaLoader" by "use XSLoader", remove "DynaLoader" from @ISA, change
       "bootstrap" by "XSLoader::load".  Do not forget to quote the name of your package on the
       "XSLoader::load" line, and add comma (",") before the arguments ($VERSION above).

       Of course, if @ISA contained only "DynaLoader", there is no need to have the @ISA assignment at all;
       moreover, if instead of "our" one uses the more backward-compatible

           use vars qw($VERSION @ISA);

       one can remove this reference to @ISA together with the @ISA assignment.

       If no $VERSION was specified on the "bootstrap" line, the last line becomes

           XSLoader::load 'YourPackage';

       If the call to "load" is from the YourPackage, then that can be further simplified to

           XSLoader::load();

       as "load" will use "caller" to determine the package.

   Backward compatible boilerplate
       If you want to have your cake and eat it too, you need a more complicated boilerplate.

           package YourPackage;
           use vars qw($VERSION @ISA);

           @ISA = qw( OnePackage OtherPackage );
           $VERSION = '0.01';
           eval {
              require XSLoader;
              XSLoader::load('YourPackage', $VERSION);
              1;
           } or do {
              require DynaLoader;
              push @ISA, 'DynaLoader';
              bootstrap YourPackage $VERSION;
           };

       The parentheses about "XSLoader::load()" arguments are needed since we replaced "use XSLoader" by
       "require", so the compiler does not know that a function "XSLoader::load()" is present.

       This boilerplate uses the low-overhead "XSLoader" if present; if used with an antic Perl which has no
       "XSLoader", it falls back to using "DynaLoader".

Order of initialization: early load()
       Skip this section if the XSUB functions are supposed to be called from other modules only; read it
       only if you call your XSUBs from the code in your module, or have a "BOOT:" section in your XS file
       (see "The BOOT: Keyword" in perlxs).  What is described here is equally applicable to the DynaLoader
       interface.

       A sufficiently complicated module using XS would have both Perl code (defined in YourPackage.pm) and
       XS code (defined in YourPackage.xs).  If this Perl code makes calls into this XS code, and/or this XS
       code makes calls to the Perl code, one should be careful with the order of initialization.

       The call to "XSLoader::load()" (or "bootstrap()") calls the module's bootstrap code. For modules
       build by xsubpp (nearly all modules) this has three side effects:

       •   A sanity check is done to ensure that the versions of the .pm and the (compiled) .xs parts are
           compatible. If $VERSION was specified, this is used for the check. If not specified, it defaults
           to "$XS_VERSION // $VERSION" (in the module's namespace)

       •   the XSUBs are made accessible from Perl

       •   if a "BOOT:" section was present in the .xs file, the code there is called.

       Consequently, if the code in the .pm file makes calls to these XSUBs, it is convenient to have XSUBs
       installed before the Perl code is defined; for example, this makes prototypes for XSUBs visible to
       this Perl code.  Alternatively, if the "BOOT:" section makes calls to Perl functions (or uses Perl
       variables) defined in the .pm file, they must be defined prior to the call to "XSLoader::load()" (or
       "bootstrap()").

       The first situation being much more frequent, it makes sense to rewrite the boilerplate as

           package YourPackage;
           use XSLoader;
           use vars qw($VERSION @ISA);

           BEGIN {
              @ISA = qw( OnePackage OtherPackage );
              $VERSION = '0.01';

              # Put Perl code used in the BOOT: section here

              XSLoader::load 'YourPackage', $VERSION;
           }

           # Put Perl code making calls into XSUBs here

   The most hairy case
       If the interdependence of your "BOOT:" section and Perl code is more complicated than this (e.g., the
       "BOOT:" section makes calls to Perl functions which make calls to XSUBs with prototypes), get rid of
       the "BOOT:" section altogether.  Replace it with a function "onBOOT()", and call it like this:

           package YourPackage;
           use XSLoader;
           use vars qw($VERSION @ISA);

           BEGIN {
              @ISA = qw( OnePackage OtherPackage );
              $VERSION = '0.01';
              XSLoader::load 'YourPackage', $VERSION;
           }

           # Put Perl code used in onBOOT() function here; calls to XSUBs are
           # prototype-checked.

           onBOOT;

           # Put Perl initialization code assuming that XS is initialized here

DIAGNOSTICS
       "Can't find '%s' symbol in %s"
           (F) The bootstrap symbol could not be found in the extension module.

       "Can't load '%s' for module %s: %s"
           (F) The loading or initialisation of the extension module failed.  The detailed error follows.

       "Undefined symbols present after loading %s: %s"
           (W) As the message says, some symbols stay undefined although the extension module was correctly
           loaded and initialised. The list of undefined symbols follows.

LIMITATIONS
       To reduce the overhead as much as possible, only one possible location is checked to find the
       extension DLL (this location is where "make install" would put the DLL).  If not found, the search
       for the DLL is transparently delegated to "DynaLoader", which looks for the DLL along the @INC list.

       In particular, this is applicable to the structure of @INC used for testing not-yet-installed
       extensions.  This means that running uninstalled extensions may have much more overhead than running
       the same extensions after "make install".

KNOWN BUGS
       The new simpler way to call "XSLoader::load()" with no arguments at all does not work on Perl 5.8.4
       and 5.8.5.

BUGS
       Please report any bugs or feature requests via the perlbug(1) utility.

SEE ALSO
       DynaLoader

AUTHORS
       Ilya Zakharevich originally extracted "XSLoader" from "DynaLoader".

       CPAN version is currently maintained by Sebastien Aperghis-Tramoni <sebastien@aperghis.net>.

       Previous maintainer was Michael G Schwern <schwern@pobox.com>.

COPYRIGHT & LICENSE
       Copyright (C) 1990-2011 by Larry Wall and others.

       This program is free software; you can redistribute it and/or modify it under the same terms as Perl
       itself.



perl v5.16.2                                     2013-08-25                                    XSLoader(3pm)