Страницы справочника OS X

Эта страница руководства является частью версии 5.0 Инструментов XCode

Читать страницы руководства

libcurl-errors(3)                              libcurl errors                              libcurl-errors(3)



NAME
       libcurl-errors - error codes in libcurl

DESCRIPTION
       This man page includes most, if not all, available error codes in libcurl.  Why they occur and possi-bly possibly
       bly what you can do to fix the problem are also included.

CURLcode
       Almost all "easy" interface functions return a  CURLcode  error  code.  No  matter  what,  using  the
       curl_easy_setopt(3)  option  CURLOPT_ERRORBUFFER  is a good idea as it will give you a human readable
       error string that may offer more details about the cause of the  error  than  just  the  error  code.
       curl_easy_strerror(3) can be called to get an error string from a given CURLcode number.

       CURLcode is one of the following:

       CURLE_OK (0)
              All fine. Proceed as usual.

       CURLE_UNSUPPORTED_PROTOCOL (1)
              The  URL you passed to libcurl used a protocol that this libcurl does not support. The support
              might be a compile-time option that you didn't use, it can be a misspelled protocol string  or
              just a protocol libcurl has no code for.

       CURLE_FAILED_INIT (2)
              Very early initialization code failed. This is likely to be an internal error or problem, or a
              resource problem where something fundamental couldn't get done at init time.

       CURLE_URL_MALFORMAT (3)
              The URL was not properly formatted.

       CURLE_NOT_BUILT_IN (4)
              A requested feature, protocol or option was not found built-in in this libcurl due to a build-time buildtime
              time decision. This means that a feature or option was not enabled or explicitly disabled when
              libcurl was built and in order to get it to function you have to get a rebuilt libcurl.

       CURLE_COULDNT_RESOLVE_PROXY (5)
              Couldn't resolve proxy. The given proxy host could not be resolved.

       CURLE_COULDNT_RESOLVE_HOST (6)
              Couldn't resolve host. The given remote host was not resolved.

       CURLE_COULDNT_CONNECT (7)
              Failed to connect() to host or proxy.

       CURLE_FTP_WEIRD_SERVER_REPLY (8)
              After connecting to a FTP server, libcurl expects to get a certain reply back. This error code
              implies  that it got a strange or bad reply. The given remote server is probably not an OK FTP
              server.

       CURLE_REMOTE_ACCESS_DENIED (9)
              We were denied access to the resource given in the URL.  For FTP, this occurs while trying  to
              change to the remote directory.

       CURLE_FTP_ACCEPT_FAILED (10)
              While waiting for the server to connect back when an active FTP session is used, an error code
              was sent over the control connection or similar.

       CURLE_FTP_WEIRD_PASS_REPLY (11)
              After having sent the FTP password to the server, libcurl expects a proper reply.  This  error
              code indicates that an unexpected code was returned.

       CURLE_FTP_ACCEPT_TIMEOUT (12)
              During  an  active  FTP session while waiting for the server to connect, the CURLOPT_ACCEPTTI-MOUT_MS CURLOPT_ACCEPTTIMOUT_MS
              MOUT_MS (or the internal default) timeout expired.

       CURLE_FTP_WEIRD_PASV_REPLY (13)
              libcurl failed to get a sensible result back from the server as a response to either a PASV or
              a EPSV command. The server is flawed.

       CURLE_FTP_WEIRD_227_FORMAT (14)
              FTP  servers return a 227-line as a response to a PASV command. If libcurl fails to parse that
              line, this return code is passed back.

       CURLE_FTP_CANT_GET_HOST (15)
              An internal failure to lookup the host used for the new connection.

       CURLE_FTP_COULDNT_SET_TYPE (17)
              Received an error when trying to set the transfer mode to binary or ASCII.

       CURLE_PARTIAL_FILE (18)
              A file transfer was shorter or larger than  expected.  This  happens  when  the  server  first
              reports  an  expected  transfer size, and then delivers data that doesn't match the previously
              given size.

       CURLE_FTP_COULDNT_RETR_FILE (19)
              This was either a weird reply to a 'RETR' command or a zero byte transfer complete.

       CURLE_QUOTE_ERROR (21)
              When sending custom "QUOTE" commands to the remote server, one of  the  commands  returned  an
              error  code that was 400 or higher (for FTP) or otherwise indicated unsuccessful completion of
              the command.

       CURLE_HTTP_RETURNED_ERROR (22)
              This is returned if CURLOPT_FAILONERROR is set TRUE and the HTTP server returns an error  code
              that is >= 400.

       CURLE_WRITE_ERROR (23)
              An  error  occurred  when  writing  received data to a local file, or an error was returned to
              libcurl from a write callback.

       CURLE_UPLOAD_FAILED (25)
              Failed starting the upload. For FTP, the server typically denied the STOR command.  The  error
              buffer usually contains the server's explanation for this.

       CURLE_READ_ERROR (26)
              There was a problem reading a local file or an error returned by the read callback.

       CURLE_OUT_OF_MEMORY (27)
              A memory allocation request failed. This is serious badness and things are severely screwed up
              if this ever occurs.

       CURLE_OPERATION_TIMEDOUT (28)
              Operation timeout. The specified time-out period was reached according to the conditions.

       CURLE_FTP_PORT_FAILED (30)
              The FTP PORT command returned error. This mostly happens when you  haven't  specified  a  good
              enough address for libcurl to use. See CURLOPT_FTPPORT.

       CURLE_FTP_COULDNT_USE_REST (31)
              The FTP REST command returned error. This should never happen if the server is sane.

       CURLE_RANGE_ERROR (33)
              The server does not support or accept range requests.

       CURLE_HTTP_POST_ERROR (34)
              This is an odd error that mainly occurs due to internal confusion.

       CURLE_SSL_CONNECT_ERROR (35)
              A  problem  occurred  somewhere in the SSL/TLS handshake. You really want the error buffer and
              read the message there as it pinpoints the problem slightly more. Could be certificates  (file
              formats, paths, permissions), passwords, and others.

       CURLE_BAD_DOWNLOAD_RESUME (36)
              The download could not be resumed because the specified offset was out of the file boundary.

       CURLE_FILE_COULDNT_READ_FILE (37)
              A  file given with FILE:// couldn't be opened. Most likely because the file path doesn't iden-tify identify
              tify an existing file. Did you check file permissions?

       CURLE_LDAP_CANNOT_BIND (38)
              LDAP cannot bind. LDAP bind operation failed.

       CURLE_LDAP_SEARCH_FAILED (39)
              LDAP search failed.

       CURLE_FUNCTION_NOT_FOUND (41)
              Function not found. A required zlib function was not found.

       CURLE_ABORTED_BY_CALLBACK (42)
              Aborted by callback. A callback returned "abort" to libcurl.

       CURLE_BAD_FUNCTION_ARGUMENT (43)
              Internal error. A function was called with a bad parameter.

       CURLE_INTERFACE_FAILED (45)
              Interface error. A specified outgoing interface could not be used. Set which interface to  use
              for outgoing connections' source IP address with CURLOPT_INTERFACE.

       CURLE_TOO_MANY_REDIRECTS (47)
              Too  many redirects. When following redirects, libcurl hit the maximum amount.  Set your limit
              with CURLOPT_MAXREDIRS.

       CURLE_UNKNOWN_OPTION (48)
              An option passed to libcurl is not recognized/known. Refer to the  appropriate  documentation.
              This is most likely a problem in the program that uses libcurl. The error buffer might contain
              more specific information about which exact option it concerns.

       CURLE_TELNET_OPTION_SYNTAX (49)
              A telnet option string was Illegally formatted.

       CURLE_PEER_FAILED_VERIFICATION (51)
              The remote server's SSL certificate or SSH md5 fingerprint was deemed not OK.

       CURLE_GOT_NOTHING (52)
              Nothing was returned from the server, and under the circumstances, getting nothing is  consid-ered considered
              ered an error.

       CURLE_SSL_ENGINE_NOTFOUND (53)
              The specified crypto engine wasn't found.

       CURLE_SSL_ENGINE_SETFAILED (54)
              Failed setting the selected SSL crypto engine as default!

       CURLE_SEND_ERROR (55)
              Failed sending network data.

       CURLE_RECV_ERROR (56)
              Failure with receiving network data.

       CURLE_SSL_CERTPROBLEM (58)
              problem with the local client certificate.

       CURLE_SSL_CIPHER (59)
              Couldn't use specified cipher.

       CURLE_SSL_CACERT (60)
              Peer certificate cannot be authenticated with known CA certificates.

       CURLE_BAD_CONTENT_ENCODING (61)
              Unrecognized transfer encoding.

       CURLE_LDAP_INVALID_URL (62)
              Invalid LDAP URL.

       CURLE_FILESIZE_EXCEEDED (63)
              Maximum file size exceeded.

       CURLE_USE_SSL_FAILED (64)
              Requested FTP SSL level failed.

       CURLE_SEND_FAIL_REWIND (65)
              When doing a send operation curl had to rewind the data to retransmit, but the rewinding oper-ation operation
              ation failed.

       CURLE_SSL_ENGINE_INITFAILED (66)
              Initiating the SSL Engine failed.

       CURLE_LOGIN_DENIED (67)
              The remote server denied curl to login (Added in 7.13.1)

       CURLE_TFTP_NOTFOUND (68)
              File not found on TFTP server.

       CURLE_TFTP_PERM (69)
              Permission problem on TFTP server.

       CURLE_REMOTE_DISK_FULL (70)
              Out of disk space on the server.

       CURLE_TFTP_ILLEGAL (71)
              Illegal TFTP operation.

       CURLE_TFTP_UNKNOWNID (72)
              Unknown TFTP transfer ID.

       CURLE_REMOTE_FILE_EXISTS (73)
              File already exists and will not be overwritten.

       CURLE_TFTP_NOSUCHUSER (74)
              This error should never be returned by a properly functioning TFTP server.

       CURLE_CONV_FAILED (75)
              Character conversion failed.

       CURLE_CONV_REQD (76)
              Caller must register conversion callbacks.

       CURLE_SSL_CACERT_BADFILE (77)
              Problem with reading the SSL CA cert (path? access rights?)

       CURLE_REMOTE_FILE_NOT_FOUND (78)
              The resource referenced in the URL does not exist.

       CURLE_SSH (79)
              An unspecified error occurred during the SSH session.

       CURLE_SSL_SHUTDOWN_FAILED (80)
              Failed to shut down the SSL connection.

       CURLE_AGAIN (81)
              Socket is not ready for send/recv wait till it's ready and try again. This return code is only
              returned from curl_easy_recv(3) and curl_easy_send(3) (Added in 7.18.2)

       CURLE_SSL_CRL_BADFILE (82)
              Failed to load CRL file (Added in 7.19.0)

       CURLE_SSL_ISSUER_ERROR (83)
              Issuer check failed (Added in 7.19.0)

       CURLE_FTP_PRET_FAILED (84)
              The FTP server does not understand the PRET command at all or does not support the given argu-ment. argument.
              ment. Be careful when using CURLOPT_CUSTOMREQUEST, a custom LIST command  will  be  sent  with
              PRET CMD before PASV as well. (Added in 7.20.0)

       CURLE_RTSP_CSEQ_ERROR (85)
              Mismatch of RTSP CSeq numbers.

       CURLE_RTSP_SESSION_ERROR (86)
              Mismatch of RTSP Session Identifiers.

       CURLE_FTP_BAD_FILE_LIST (87)
              Unable to parse FTP file list (during FTP wildcard downloading).

       CURLE_CHUNK_FAILED (88)
              Chunk callback reported error.

       CURLE_NO_CONNECTION_AVAILABLE (89)
              (For  internal  use only, will never be returned by libcurl) No connection available, the ses-sion session
              sion will be queued. (added in 7.30.0)

       CURLE_OBSOLETE*
              These error codes will never be returned. They were used in an old  libcurl  version  and  are
              currently unused.

CURLMcode
       This  is  the  generic  return  code  used by functions in the libcurl multi interface. Also consider
       curl_multi_strerror(3).

       CURLM_CALL_MULTI_PERFORM (-1)
              This is not really an error. It means you  should  call  curl_multi_perform(3)  again  without
              doing  select()  or  similar  in  between.  Before  version  7.20.0  this could be returned by
              curl_multi_perform(3), but in later versions this return code is never used.

       CURLM_OK (0)
              Things are fine.

       CURLM_BAD_HANDLE (1)
              The passed-in handle is not a valid CURLM handle.

       CURLM_BAD_EASY_HANDLE (2)
              An easy handle was not good/valid. It could mean that it isn't an easy handle at all, or  pos-sibly possibly
              sibly that the handle already is in used by this or another multi handle.

       CURLM_OUT_OF_MEMORY (3)
              You are doomed.

       CURLM_INTERNAL_ERROR (4)
              This can only be returned if libcurl bugs. Please report it to us!

       CURLM_BAD_SOCKET (5)
              The passed-in socket is not a valid one that libcurl already knows about.  (Added in 7.15.4)

       CURLM_UNKNOWN_OPTION (6)
              curl_multi_setopt() with unsupported option (Added in 7.15.4)

CURLSHcode
       The "share" interface will return a CURLSHcode to indicate when an error has occurred.  Also consider
       curl_share_strerror(3).

       CURLSHE_OK (0)
              All fine. Proceed as usual.

       CURLSHE_BAD_OPTION (1)
              An invalid option was passed to the function.

       CURLSHE_IN_USE (2)
              The share object is currently in use.

       CURLSHE_INVALID (3)
              An invalid share object was passed to the function.

       CURLSHE_NOMEM (4)
              Not enough memory was available.  (Added in 7.12.0)

       CURLSHE_NOT_BUILT_IN (5)
              The requested sharing could not be done because the library you use don't have that particular
              feature enabled. (Added in 7.23.0)



libcurl 7.20.0                                   1 Jan 2010                                libcurl-errors(3)