Spec-Zone .ru
спецификации, руководства, описания, API
Spec-Zone .ru
спецификации, руководства, описания, API
Библиотека разработчика Mac Разработчик
Поиск

 

Эта страница руководства для  версии 10.9 Mac OS X

Если Вы выполняете различную версию  Mac OS X, просматриваете документацию локально:

Читать страницы руководства

Страницы руководства предназначаются как справочник для людей, уже понимающих технологию.

  • Чтобы изучить, как руководство организовано или узнать о синтаксисе команды, прочитайте страницу руководства для страниц справочника (5).

  • Для получения дополнительной информации об этой технологии, ищите другую документацию в Библиотеке Разработчика Apple.

  • Для получения общей информации о записи сценариев оболочки, считайте Shell, Пишущий сценарий Учебника для начинающих.




YP(8)                     BSD System Manager's Manual                    YP(8)

NAME
     yp -- description of the YP/NIS system

SYNOPSIS
     yp

DESCRIPTION
     The YP subsystem allows network management of passwd, group, netgroup, hosts, services, rpc, bootparams
     and ethers file entries through the functions getpwent(3), getgrent(3), getnetgrent(3), gethostent(3),
     getnetent(3), getrpcent(3), and ethers(3).  The bootparamd(8) daemon makes direct NIS library calls
     since there are no functions in the standard C library for reading bootparams.  NIS support is enabled
     in nsswitch.conf(5).

     The YP subsystem is started automatically by launchd(8) if an NIS domain is specified in the
     /etc/defaultdomain configuration file, and if the directory /var/yp exists (which it does in the
     default distribution).

     NIS is an RPC-based client/server system that allows a group of machines within an NIS domain to share
     a common set of configuration files.  This permits a system administrator to set up NIS client systems
     with only minimal configuration data and add, remove or modify configuration data from a single loca-tion. location.
     tion.

     The canonical copies of all NIS information are stored on a single machine called the NIS master
     server.  The databases used to store the information are called NIS maps.  In FreeBSD, these maps are
     stored in /var/yp/<domainname> where <domainname> is the name of the NIS domain being served.  A single
     NIS server can support several domains at once, therefore it is possible to have several such directo-ries, directories,
     ries, one for each supported domain.  Each domain will have its own independent set of maps.

     In FreeBSD, the NIS maps are Berkeley DB hashed database files (the same format used for the passwd(5)
     database files).  Other operating systems that support NIS use old-style ndbm databases instead
     (largely because Sun Microsystems originally based their NIS implementation on ndbm, and other vendors
     have simply licensed Sun's code rather than design their own implementation with a different database
     format).  On these systems, the databases are generally split into .dir and .pag files which the ndbm
     code uses to hold separate parts of the hash database.  The Berkeley DB hash method instead uses a sin-gle single
     gle file for both pieces of information.  This means that while you may have passwd.byname.dir and
     passwd.byname.pag files on other operating systems (both of which are really parts of the same map),
     FreeBSD will have only one file called passwd.byname.  The difference in format is not significant:
     only the NIS server, ypserv(8), and related tools need to know the database format of the NIS maps.
     Client NIS systems receive all NIS data in ASCII form.

     There are three main types of NIS systems:

     1.   NIS clients, which query NIS servers for information.

     2.   NIS master servers, which maintain the canonical copies of all NIS maps.

     3.   NIS slave servers, which maintain backup copies of NIS maps that are periodically updated by the
          master.

     A NIS client establishes what is called a binding to a particular NIS server using the ypbind(8) dae-mon. daemon.
     mon.  The ypbind(8) utility checks the system's default domain (as set by the domainname(1) command)
     and begins broadcasting RPC requests on the local network.  These requests specify the name of the
     domain for which ypbind(8) is attempting to establish a binding.  If a server that has been configured
     to serve the requested domain receives one of the broadcasts, it will respond to ypbind(8), which will
     record the server's address.  If there are several servers available (a master and several slaves, for
     example), ypbind(8) will use the address of the first one to respond.  From that point on, the client
     system will direct all of its NIS requests to that server.  The ypbind(8) utility will occasionally
     ``ping'' the server to make sure it is still up and running.  If it fails to receive a reply to one of
     its pings within a reasonable amount of time, ypbind(8) will mark the domain as unbound and begin
     broadcasting again in the hopes of locating another server.

     NIS master and slave servers handle all NIS requests with the ypserv(8) daemon.  The ypserv(8) utility
     is responsible for receiving incoming requests from NIS clients, translating the requested domain and
     map name to a path to the corresponding database file and transmitting data from the database back to
     the client.  There is a specific set of requests that ypserv(8) is designed to handle, most of which
     are implemented as functions within the standard C library:

     yp_order()   check the creation date of a particular map

     yp_master()  obtain the name of the NIS master server for a given map/domain

     yp_match()   lookup the data corresponding to a given in key in a particular map/domain

     yp_first()   obtain the first key/data pair in a particular map/domain

     yp_next()    pass ypserv(8) a key in a particular map/domain and have it return the key/data pair imme-diately immediately
                  diately following it (the functions yp_first() and yp_next() can be used to do a sequen-tial sequential
                  tial search of an NIS map)

     yp_all()     retrieve the entire contents of a map

     There are a few other requests which ypserv(8) is capable of handling (i.e., acknowledge whether or not
     you can handle a particular domain (YPPROC_DOMAIN), or acknowledge only if you can handle the domain
     and be silent otherwise (YPPROC_DOMAIN_NONACK)) but these requests are usually generated only by
     ypbind(8) and are not meant to be used by standard utilities.

     On networks with a large number of hosts, it is often a good idea to use a master server and several
     slaves rather than just a single master server.  A slave server provides the exact same information as
     a master server: whenever the maps on the master server are updated, the new data should be propagated
     to the slave systems using the yppush(8) command.  The NIS Makefile (/var/yp/Makefile) will do this
     automatically if the administrator comments out the line which says ``NOPUSH=true'' (NOPUSH is set to
     true by default because the default configuration is for a small network with only one NIS server).
     The yppush(8) command will initiate a transaction between the master and slave during which the slave
     will transfer the specified maps from the master server using ypxfr(8).  (The slave server calls
     ypxfr(8) automatically from within ypserv(8); therefore it is not usually necessary for the administra-tor administrator
     tor to use it directly.  It can be run manually if desired, however.)  Maintaining slave servers helps
     improve NIS performance on large networks by:

     •   Providing backup services in the event that the NIS master crashes or becomes unreachable

     •   Spreading the client load out over several machines instead of causing the master to become over-loaded overloaded
         loaded

     •   Allowing a single NIS domain to extend beyond a local network (the ypbind(8) daemon might not be
         able to locate a server automatically if it resides on a network outside the reach of its broad-casts. broadcasts.
         casts.  It is possible to force ypbind(8) to bind to a particular server with ypset(8) but this is
         sometimes inconvenient.  This problem can be avoided simply by placing a slave server on the local
         network.)

     The FreeBSD ypserv(8) is specially designed to provide enhanced security (compared to other NIS imple-mentations) implementations)
     mentations) when used exclusively with FreeBSD client systems.  The FreeBSD password database system
     (which is derived directly from 4.4BSD) includes support for shadow passwords.  The standard password
     database does not contain users' encrypted passwords: these are instead stored (along with other infor-mation) information)
     mation) in a separate database which is accessible only by the super-user.  If the encrypted password
     database were made available as an NIS map, this security feature would be totally disabled, since any
     user is allowed to retrieve NIS data.

     To help prevent this, FreeBSD's NIS server handles the shadow password maps (master.passwd.byname and
     master.passwd.byuid) in a special way: the server will only provide access to these maps in response to
     requests that originate on privileged ports.  Since only the super-user is allowed to bind to a privi-leged privileged
     leged port, the server assumes that all such requests come from privileged users.  All other requests
     are denied: requests from non-privileged ports will receive only an error code from the server.  Addi-tionally, Additionally,
     tionally, FreeBSD's ypserv(8) includes support for Wietse Venema's tcp wrapper package; with tcp wrap-per wrapper
     per support enabled, the administrator can configure ypserv(8) to respond only to selected client
     machines.

     While these enhancements provide better security than stock NIS, they are by no means 100% effective.
     It is still possible for someone with access to your network to spoof the server into disclosing the
     shadow password maps.

     On the client side, FreeBSD's getpwent(3) functions will automatically search for the master.passwd
     maps and use them if they exist.  If they do, they will be used, and all fields in these special maps
     (class, password age and account expiration) will be decoded.  If they are not found, the standard
     passwd maps will be used instead.

COMPATIBILITY
     When using a non-FreeBSD NIS server for passwd(5) files, it is unlikely that the default MD5-based for-mat format
     mat that FreeBSD uses for passwords will be accepted by it.  If this is the case, the value of the
     passwd_format setting in login.conf(5) should be changed to "des" for compatibility.

     Some systems, such as SunOS 4.x, need NIS to be running in order for their hostname resolution func-tions functions
     tions (gethostbyname(), gethostbyaddr(), etc.) to work properly.  On these systems, ypserv(8) performs
     DNS lookups when asked to return information about a host that does not exist in its hosts.byname or
     hosts.byaddr maps.  FreeBSD's resolver uses DNS by default (it can be made to use NIS, if desired),
     therefore its NIS server does not do DNS lookups by default.  However, ypserv(8) can be made to perform
     DNS lookups if it is started with a special flag.  It can also be made to register itself as an NIS v1
     server in order to placate certain systems that insist on the presence of a v1 server (FreeBSD uses
     only NIS v2, but many other systems, including SunOS 4.x, search for both a v1 and v2 server when bind-ing). binding).
     ing).  FreeBSD's ypserv(8) does not actually handle NIS v1 requests, but this ``kludge mode'' is useful
     for silencing stubborn systems that search for both a v1 and v2 server.

     (Please see the ypserv(8) manual page for a detailed description of these special features and flags.)

HISTORY
     The YP subsystem was written from the ground up by Theo de Raadt to be compatible to Sun's implementa-tion. implementation.
     tion.  Bug fixes, improvements and NIS server support were later added by Bill Paul.  The server-side
     code was originally written by Peter Eriksson and Tobias Reber and is subject to the GNU Public
     License.  No Sun code was referenced.

BUGS
     While FreeBSD now has both NIS client and server capabilities, it does not yet have support for
     ypupdated(8) or the yp_update() function.  Both of these require secure RPC, which FreeBSD does not
     support yet either.

     The getservent(3) and getprotoent(3) functions do not yet have NIS support.  Fortunately, these files
     do not need to be updated that often.

     Many more manual pages should be written, especially ypclnt(3).  For the time being, seek out a local
     Sun machine and read the manuals for there.

     Neither Sun nor this author have found a clean way to handle the problems that occur when ypbind cannot
     find its server upon bootup.

BSD                              April 5, 1993                             BSD

Сообщение о проблемах

Способ сообщить о проблеме с этой страницей руководства зависит от типа проблемы:

Ошибки содержания
Ошибки отчета в содержании этой документации со ссылками на отзыв ниже.
Отчеты об ошибках
Сообщите об ошибках в функциональности описанного инструмента или API через Генератор отчетов Ошибки.
Форматирование проблем
Отчет, форматирующий ошибки в интерактивной версии этих страниц со ссылками на отзыв ниже.