|
|
Эта страница руководства для версии 10.9 Mac OS XЕсли Вы выполняете различную версию Mac OS X, просматриваете документацию локально:
Читать страницы руководстваСтраницы руководства предназначаются как справочник для людей, уже понимающих технологию.
|
re_syntax(n) Tcl Built-In Commands re_syntax(n)
____________________________________________________________________________________________________________
NAME
re_syntax - Syntax of Tcl regular expressions
____________________________________________________________________________________________________________
DESCRIPTION
A regular expression describes strings of characters. It's a pattern that matches certain strings
and does not match others.
DIFFERENT FLAVORS OF REs
Regular expressions ("RE"s), as defined by POSIX, come in two flavors: extended REs ("ERE"s) and
basic REs ("BRE"s). EREs are roughly those of the traditional egrep, while BREs are roughly those of
the traditional ed. This implementation adds a third flavor, advanced REs ("ARE"s), basically EREs
with some significant extensions.
This manual page primarily describes AREs. BREs mostly exist for backward compatibility in some old
programs; they will be discussed at the end. POSIX EREs are almost an exact subset of AREs. Features
of AREs that are not present in EREs will be indicated.
REGULAR EXPRESSION SYNTAX
Tcl regular expressions are implemented using the package written by Henry Spencer, based on the
1003.2 spec and some (not quite all) of the Perl5 extensions (thanks, Henry!). Much of the descrip-tion description
tion of regular expressions below is copied verbatim from his manual entry.
An ARE is one or more branches, separated by "|", matching anything that matches any of the branches.
A branch is zero or more constraints or quantified atoms, concatenated. It matches a match for the
first, followed by a match for the second, etc; an empty branch matches the empty string.
QUANTIFIERS
A quantified atom is an atom possibly followed by a single quantifier. Without a quantifier, it
matches a single match for the atom. The quantifiers, and what a so-quantified atom matches, are:
* a sequence of 0 or more matches of the atom
+ a sequence of 1 or more matches of the atom
? a sequence of 0 or 1 matches of the atom
{m} a sequence of exactly m matches of the atom
{m,} a sequence of m or more matches of the atom
{m,n} a sequence of m through n (inclusive) matches of the atom; m may not exceed n
*? +? ?? {m}? {m,}? {m,n}?
non-greedy quantifiers, which match the same possibilities, but prefer the smallest number
rather than the largest number of matches (see MATCHING)
The forms using { and } are known as bounds. The numbers m and n are unsigned decimal integers with
permissible values from 0 to 255 inclusive.
ATOMS
An atom is one of:
(re) matches a match for re (re is any regular expression) with the match noted for possible
reporting
(?:re)
as previous, but does no reporting (a "non-capturing" set of parentheses)
() matches an empty string, noted for possible reporting
(?:) matches an empty string, without reporting
[chars]
a bracket expression, matching any one of the chars (see BRACKET EXPRESSIONS for more detail)
. matches any single character
\k matches the non-alphanumeric character k taken as an ordinary character, e.g. \\ matches a
backslash character
\c where c is alphanumeric (possibly followed by other characters), an escape (AREs only), see
ESCAPES below
{ when followed by a character other than a digit, matches the left-brace character "{"; when
followed by a digit, it is the beginning of a bound (see above)
x where x is a single character with no other significance, matches that character.
CONSTRAINTS
A constraint matches an empty string when specific conditions are met. A constraint may not be fol-lowed followed
lowed by a quantifier. The simple constraints are as follows; some more constraints are described
later, under ESCAPES.
^ matches at the beginning of a line
$ matches at the end of a line
(?=re) positive lookahead (AREs only), matches at any point where a substring matching re begins
(?!re) negative lookahead (AREs only), matches at any point where no substring matching re begins
The lookahead constraints may not contain back references (see later), and all parentheses within
them are considered non-capturing.
An RE may not end with "\".
BRACKET EXPRESSIONS
A bracket expression is a list of characters enclosed in "[]". It normally matches any single char-acter character
acter from the list (but see below). If the list begins with "^", it matches any single character
(but see below) not from the rest of the list.
If two characters in the list are separated by "-", this is shorthand for the full range of charac-ters characters
ters between those two (inclusive) in the collating sequence, e.g. "[0-9]" in Unicode matches any
conventional decimal digit. Two ranges may not share an endpoint, so e.g. "a-c-e" is illegal. Ranges
in Tcl always use the Unicode collating sequence, but other programs may use other collating
sequences and this can be a source of incompatability between programs.
To include a literal ] or - in the list, the simplest method is to enclose it in [. and .] to make it
a collating element (see below). Alternatively, make it the first character (following a possible
"^"), or (AREs only) precede it with "\". Alternatively, for "-", make it the last character, or the
second endpoint of a range. To use a literal - as the first endpoint of a range, make it a collating
element or (AREs only) precede it with "\". With the exception of these, some combinations using [
(see next paragraphs), and escapes, all other special characters lose their special significance
within a bracket expression.
CHARACTER CLASSES
Within a bracket expression, the name of a character class enclosed in [: and :] stands for the list
of all characters (not all collating elements!) belonging to that class. Standard character classes
are:
alpha A letter.
upper An upper-case letter.
lower A lower-case letter.
digit A decimal digit.
xdigit A hexadecimal digit.
alnum An alphanumeric (letter or digit).
print A "printable" (same as graph, except also including space).
blank A space or tab character.
space A character producing white space in displayed text.
punct A punctuation character.
graph A character with a visible representation (includes both alnum and punct).
cntrl A control character.
A locale may provide others. A character class may not be used as an endpoint of a range.
(Note: the current Tcl implementation has only one locale, the Unicode locale, which supports
exactly the above classes.)
BRACKETED CONSTRAINTS
There are two special cases of bracket expressions: the bracket expressions "[[:<:]]" and "[[:>:]]"
are constraints, matching empty strings at the beginning and end of a word respectively. A word is
defined as a sequence of word characters that is neither preceded nor followed by word characters. A
word character is an alnum character or an underscore ("_"). These special bracket expressions are
deprecated; users of AREs should use constraint escapes instead (see below).
COLLATING ELEMENTS
Within a bracket expression, a collating element (a character, a multi-character sequence that col-lates collates
lates as if it were a single character, or a collating-sequence name for either) enclosed in [. and
.] stands for the sequence of characters of that collating element. The sequence is a single element
of the bracket expression's list. A bracket expression in a locale that has multi-character collating
elements can thus match more than one character. So (insidiously), a bracket expression that starts
with ^ can match multi-character collating elements even if none of them appear in the bracket
expression!
(Note: Tcl has no multi-character collating elements. This information is only for illustra-tion.) illustration.)
tion.)
For example, assume the collating sequence includes a ch multi-character collating element. Then the
RE "[[.ch.]]*c" (zero or more "chs" followed by "c") matches the first five characters of "chchcc".
Also, the RE "[^c]b" matches all of "chb" (because "[^c]" matches the multi-character "ch").
EQUIVALENCE CLASSES
Within a bracket expression, a collating element enclosed in [= and =] is an equivalence class,
standing for the sequences of characters of all collating elements equivalent to that one, including
itself. (If there are no other equivalent collating elements, the treatment is as if the enclosing
delimiters were "[." and ".]".) For example, if o and are the members of an equivalence class, then
"[[=o=]]", "[[==]]", and "[o]" are all synonymous. An equivalence class may not be an endpoint of a
range.
(Note: Tcl implements only the Unicode locale. It does not define any equivalence classes. The
examples above are just illustrations.)
ESCAPES
Escapes (AREs only), which begin with a \ followed by an alphanumeric character, come in several
varieties: character entry, class shorthands, constraint escapes, and back references. A \ followed
by an alphanumeric character but not constituting a valid escape is illegal in AREs. In EREs, there
are no escapes: outside a bracket expression, a \ followed by an alphanumeric character merely stands
for that character as an ordinary character, and inside a bracket expression, \ is an ordinary char-acter. character.
acter. (The latter is the one actual incompatibility between EREs and AREs.)
CHARACTER-ENTRY ESCAPES
Character-entry escapes (AREs only) exist to make it easier to specify non-printing and otherwise
inconvenient characters in REs:
\a alert (bell) character, as in C
\b backspace, as in C
\B synonym for \ to help reduce backslash doubling in some applications where there are multiple
levels of backslash processing
\cX (where X is any character) the character whose low-order 5 bits are the same as those of X,
and whose other bits are all zero
\e the character whose collating-sequence name is "ESC", or failing that, the character with
octal value 033
\f formfeed, as in C
\n newline, as in C
\r carriage return, as in C
\t horizontal tab, as in C
\uwxyz
(where wxyz is exactly four hexadecimal digits) the Unicode character U+wxyz in the local byte
ordering
\Ustuvwxyz
(where stuvwxyz is exactly eight hexadecimal digits) reserved for a somewhat-hypothetical Uni-code Unicode
code extension to 32 bits
\v vertical tab, as in C are all available.
\xhhh
(where hhh is any sequence of hexadecimal digits) the character whose hexadecimal value is
0xhhh (a single character no matter how many hexadecimal digits are used).
\0 the character whose value is 0
\xy (where xy is exactly two octal digits, and is not a back reference (see below)) the character
whose octal value is 0xy
\xyz (where xyz is exactly three octal digits, and is not a back reference (see below)) the charac-ter character
ter whose octal value is 0xyz
Hexadecimal digits are "0"-"9", "a"-"f", and "A"-"F". Octal digits are "0"-"7".
The character-entry escapes are always taken as ordinary characters. For example, \135 is ] in Uni-code, Unicode,
code, but \135 does not terminate a bracket expression. Beware, however, that some applications
(e.g., C compilers and the Tcl interpreter if the regular expression is not quoted with braces)
interpret such sequences themselves before the regular-expression package gets to see them, which may
require doubling (quadrupling, etc.) the "\".
CLASS-SHORTHAND ESCAPES
Class-shorthand escapes (AREs only) provide shorthands for certain commonly-used character classes:
\d [[:digit:]]
\s [[:space:]]
\w [[:alnum:]_] (note underscore)
\D [^[:digit:]]
\S [^[:space:]]
\W [^[:alnum:]_] (note underscore)
Within bracket expressions, "\d", "\s", and "\w" lose their outer brackets, and "\D", "\S", and "\W"
are illegal. (So, for example, "[a-c\d]" is equivalent to "[a-c[:digit:]]". Also, "[a-c\D]", which
is equivalent to "[a-c^[:digit:]]", is illegal.)
CONSTRAINT ESCAPES
A constraint escape (AREs only) is a constraint, matching the empty string if specific conditions are
met, written as an escape:
\A matches only at the beginning of the string (see MATCHING, below, for how this differs from
"^")
\m matches only at the beginning of a word
\M matches only at the end of a word
\y matches only at the beginning or end of a word
\Y matches only at a point that is not the beginning or end of a word
\Z matches only at the end of the string (see MATCHING, below, for how this differs from "$")
\m (where m is a nonzero digit) a back reference, see below
\mnn (where m is a nonzero digit, and nn is some more digits, and the decimal value mnn is not
greater than the number of closing capturing parentheses seen so far) a back reference, see
below
A word is defined as in the specification of "[[:<:]]" and "[[:>:]]" above. Constraint escapes are
illegal within bracket expressions.
BACK REFERENCES
A back reference (AREs only) matches the same string matched by the parenthesized subexpression spec-ified specified
ified by the number, so that (e.g.) "([bc])\1" matches "bb" or "cc" but not "bc". The subexpression
must entirely precede the back reference in the RE. Subexpressions are numbered in the order of
their leading parentheses. Non-capturing parentheses do not define subexpressions.
There is an inherent historical ambiguity between octal character-entry escapes and back references,
which is resolved by heuristics, as hinted at above. A leading zero always indicates an octal escape.
A single non-zero digit, not followed by another digit, is always taken as a back reference. A multi-digit multidigit
digit sequence not starting with a zero is taken as a back reference if it comes after a suitable
subexpression (i.e. the number is in the legal range for a back reference), and otherwise is taken as
octal.
METASYNTAX
In addition to the main syntax described above, there are some special forms and miscellaneous syn-tactic syntactic
tactic facilities available.
Normally the flavor of RE being used is specified by application-dependent means. However, this can
be overridden by a director. If an RE of any flavor begins with "***:", the rest of the RE is an ARE.
If an RE of any flavor begins with "***=", the rest of the RE is taken to be a literal string, with
all characters considered ordinary characters.
An ARE may begin with embedded options: a sequence (?xyz) (where xyz is one or more alphabetic char-acters) characters)
acters) specifies options affecting the rest of the RE. These supplement, and can override, any
options specified by the application. The available option letters are:
b rest of RE is a BRE
c case-sensitive matching (usual default)
e rest of RE is an ERE
i case-insensitive matching (see MATCHING, below)
m historical synonym for n
n newline-sensitive matching (see MATCHING, below)
p partial newline-sensitive matching (see MATCHING, below)
q rest of RE is a literal ("quoted") string, all ordinary characters
s non-newline-sensitive matching (usual default)
t tight syntax (usual default; see below)
w inverse partial newline-sensitive ("weird") matching (see MATCHING, below)
x expanded syntax (see below)
Embedded options take effect at the ) terminating the sequence. They are available only at the start
of an ARE, and may not be used later within it.
In addition to the usual (tight) RE syntax, in which all characters are significant, there is an
expanded syntax, available in all flavors of RE with the -expanded switch, or in AREs with the embed-ded embedded
ded x option. In the expanded syntax, white-space characters are ignored and all characters between a
# and the following newline (or the end of the RE) are ignored, permitting paragraphing and comment-ing commenting
ing a complex RE. There are three exceptions to that basic rule:
• a white-space character or "#" preceded by "\" is retained
• white space or "#" within a bracket expression is retained
• white space and comments are illegal within multi-character symbols like the ARE "(?:" or the BRE
"\("
Expanded-syntax white-space characters are blank, tab, newline, and any character that belongs to the
space character class.
Finally, in an ARE, outside bracket expressions, the sequence "(?#ttt)" (where ttt is any text not
containing a ")") is a comment, completely ignored. Again, this is not allowed between the characters
of multi-character symbols like "(?:". Such comments are more a historical artifact than a useful
facility, and their use is deprecated; use the expanded syntax instead.
None of these metasyntax extensions is available if the application (or an initial "***=" director)
has specified that the user's input be treated as a literal string rather than as an RE.
MATCHING
In the event that an RE could match more than one substring of a given string, the RE matches the one
starting earliest in the string. If the RE could match more than one substring starting at that
point, its choice is determined by its preference: either the longest substring, or the shortest.
Most atoms, and all constraints, have no preference. A parenthesized RE has the same preference (pos-sibly (possibly
sibly none) as the RE. A quantified atom with quantifier {m} or {m}? has the same preference (possi-bly (possibly
bly none) as the atom itself. A quantified atom with other normal quantifiers (including {m,n} with m
equal to n) prefers longest match. A quantified atom with other non-greedy quantifiers (including
{m,n}? with m equal to n) prefers shortest match. A branch has the same preference as the first
quantified atom in it which has a preference. An RE consisting of two or more branches connected by
the | operator prefers longest match.
Subject to the constraints imposed by the rules for matching the whole RE, subexpressions also match
the longest or shortest possible substrings, based on their preferences, with subexpressions starting
earlier in the RE taking priority over ones starting later. Note that outer subexpressions thus take
priority over their component subexpressions.
Note that the quantifiers {1,1} and {1,1}? can be used to force longest and shortest preference,
respectively, on a subexpression or a whole RE.
Match lengths are measured in characters, not collating elements. An empty string is considered
longer than no match at all. For example, "bb*" matches the three middle characters of "abbbc",
"(week|wee)(night|knights)" matches all ten characters of "weeknights", when "(.*).*" is matched
against "abc" the parenthesized subexpression matches all three characters, and when "(a*)*" is
matched against "bc" both the whole RE and the parenthesized subexpression match an empty string.
If case-independent matching is specified, the effect is much as if all case distinctions had van-ished vanished
ished from the alphabet. When an alphabetic that exists in multiple cases appears as an ordinary
character outside a bracket expression, it is effectively transformed into a bracket expression con-taining containing
taining both cases, so that x becomes "[xX]". When it appears inside a bracket expression, all case
counterparts of it are added to the bracket expression, so that "[x]" becomes "[xX]" and "[^x]"
becomes "[^xX]".
If newline-sensitive matching is specified, . and bracket expressions using ^ will never match the
newline character (so that matches will never cross newlines unless the RE explicitly arranges it)
and ^ and $ will match the empty string after and before a newline respectively, in addition to
matching at beginning and end of string respectively. ARE \A and \Z continue to match beginning or
end of string only.
If partial newline-sensitive matching is specified, this affects . and bracket expressions as with
newline-sensitive matching, but not ^ and $.
If inverse partial newline-sensitive matching is specified, this affects ^ and $ as with newline-sen-sitive newline-sensitive
sitive matching, but not . and bracket expressions. This is not very useful but is provided for sym-metry. symmetry.
metry.
LIMITS AND COMPATIBILITY
No particular limit is imposed on the length of REs. Programs intended to be highly portable should
not employ REs longer than 256 bytes, as a POSIX-compliant implementation can refuse to accept such
REs.
The only feature of AREs that is actually incompatible with POSIX EREs is that \ does not lose its
special significance inside bracket expressions. All other ARE features use syntax which is illegal
or has undefined or unspecified effects in POSIX EREs; the *** syntax of directors likewise is out-side outside
side the POSIX syntax for both BREs and EREs.
Many of the ARE extensions are borrowed from Perl, but some have been changed to clean them up, and a
few Perl extensions are not present. Incompatibilities of note include "\b", "\B", the lack of spe-cial special
cial treatment for a trailing newline, the addition of complemented bracket expressions to the things
affected by newline-sensitive matching, the restrictions on parentheses and back references in looka-head lookahead
head constraints, and the longest/shortest-match (rather than first-match) matching semantics.
The matching rules for REs containing both normal and non-greedy quantifiers have changed since early
beta-test versions of this package. (The new rules are much simpler and cleaner, but do not work as
hard at guessing the user's real intentions.)
Henry Spencer's original 1986 regexp package, still in widespread use (e.g., in pre-8.1 releases of
Tcl), implemented an early version of today's EREs. There are four incompatibilities between regexp's
near-EREs ("RREs" for short) and AREs. In roughly increasing order of significance:
• In AREs, \ followed by an alphanumeric character is either an escape or an error, while in RREs,
it was just another way of writing the alphanumeric. This should not be a problem because there
was no reason to write such a sequence in RREs.
• { followed by a digit in an ARE is the beginning of a bound, while in RREs, { was always an ordi-nary ordinary
nary character. Such sequences should be rare, and will often result in an error because following
characters will not look like a valid bound.
• In AREs, \ remains a special character within "[]", so a literal \ within [] must be written "\\".
\\ also gives a literal \ within [] in RREs, but only truly paranoid programmers routinely doubled
the backslash.
• AREs report the longest/shortest match for the RE, rather than the first found in a specified
search order. This may affect some RREs which were written in the expectation that the first match
would be reported. (The careful crafting of RREs to optimize the search order for fast matching is
obsolete (AREs examine all possible matches in parallel, and their performance is largely insensi-tive insensitive
tive to their complexity) but cases where the search order was exploited to deliberately find a
match which was not the longest/shortest will need rewriting.)
BASIC REGULAR EXPRESSIONS
BREs differ from EREs in several respects. "|", "+", and ? are ordinary characters and there is no
equivalent for their functionality. The delimiters for bounds are \{ and "\}", with { and } by them-selves themselves
selves ordinary characters. The parentheses for nested subexpressions are \( and "\)", with ( and )
by themselves ordinary characters. ^ is an ordinary character except at the beginning of the RE or
the beginning of a parenthesized subexpression, $ is an ordinary character except at the end of the
RE or the end of a parenthesized subexpression, and * is an ordinary character if it appears at the
beginning of the RE or the beginning of a parenthesized subexpression (after a possible leading "^").
Finally, single-digit back references are available, and \< and \> are synonyms for "[[:<:]]" and
"[[:>:]]" respectively; no other escapes are available.
SEE ALSO
RegExp(3), regexp(n), regsub(n), lsearch(n), switch(n), text(n)
KEYWORDS
match, regular expression, string
Tcl 8.1 re_syntax(n)
|
Сообщение о проблемах
Способ сообщить о проблеме с этой страницей руководства зависит от типа проблемы:
- Ошибки содержания
- Ошибки отчета в содержании этой документации к проекту Tcl.
- Отчеты об ошибках
- Сообщите об ошибках в функциональности описанного инструмента или API к Apple через Генератор отчетов Ошибки и к проекту Tcl через их страницу создания отчетов ошибки.
- Форматирование проблем
- Отчет, форматирующий ошибки в интерактивной версии этих страниц со ссылками на отзыв ниже.