Модуль arista.eos.eos_prefix_lists — Управление ресурсом списков префиксов

Примечание

Этот модуль входит в коллекцию arista.eos (версия 9.0.0).

Возможно, эта коллекция уже установлена, если вы используете пакет ansible. Она не входит в ansible-core. Чтобы проверить установку, выполните ansible-galaxy collection list.

Чтобы установить её, используйте: ansible-galaxy collection install arista.eos.

Чтобы использовать её в playbook, укажите: arista.eos.eos_prefix_lists.

Новое в arista.eos 2.2.0

Описание
Параметры
Примечания
Примеры
Возвращаемые значения

Описание

Этот модуль настраивает и управляет атрибутами списков префиксов на платформах Arista EOS.

Псевдонимы: prefix_lists

Параметры

Параметр	Комментарии
config список / элементы=словарь	Список словарей с параметрами списка префиксов
afi строка / обязательно	Индикатор семейства адресов (AFI) для списка префиксов. Варианты: `"ipv4"` `"ipv6"`
prefix_lists список / элементы=словарь	Список списков префиксов.
entries список / элементы=словарь	Список списков префиксов
action строка	Действие, выполняемое по указанному пути. Варианты: `"deny"` `"permit"`
address строка	Адрес IPv4/IPv6 в формате префикс-маска или адрес-длина-маски.
match словарь	Маска совпадения.
masklen целое число	Длина маски.
operator строка	равно/больше чем/меньше чем Варианты: `"eq"` `"le"` `"ge"`
resequence словарь	Переиндексация списка.
default логическое значение	Переиндексация со значениями по умолчанию (10). Варианты: `false` `true`
start_seq целое число	Начальный порядковый номер.
step целое число	Шаг для инкремента порядкового номера.
sequence целое число	Порядковый номер.
name строка / обязательно	Имя списка префиксов.
running_config строка	Этот параметр используется только со состоянием parsed. Значение этого параметра должно соответствовать выводу устройства EOS, полученному с помощью команды show running-config \| section access-list. Состояние parsed считывает конфигурацию из параметра `running_config`, преобразует её в структурированные данные Ansible в соответствии с argspec модуля ресурса, а затем возвращает значение в ключе parsed в результате.
state строка	Состояние, в котором должна остаться конфигурация. Варианты: `"deleted"` `"merged"` ← (по умолчанию) `"overridden"` `"replaced"` `"gathered"` `"rendered"` `"parsed"`

Примечания

Примечание

Тестировалось на Arista EOS 4.24.6F
Этот модуль работает с подключением network_cli. См. Параметры платформы EOS.

Примеры

# Using merged


# Before state
# veos#show running-config | section prefix-lists
# veos#

- name: Merge provided configuration with device configuration
  arista.eos.eos_prefix_lists:
    config:
      - afi: "ipv4"
        prefix_lists:
          - name: "v401"
            entries:
              - sequence: 25
                action: "deny"
                address: "45.55.4.0/24"
              - sequence: 100
                action: "permit"
                address: "11.11.2.0/24"
                match:
                  masklen: 32
                  operator: "ge"
          - name: "v402"
            entries:
              - action: "deny"
                address: "10.1.1.0/24"
                sequence: 10
                match:
                  masklen: 32
                  operator: "ge"
      - afi: "ipv6"
        prefix_lists:
          - name: "v601"
            entries:
              - sequence: 125
                action: "deny"
                address: "5000:1::/64"

# Task Output
# -------------
# before: {}
# commands:
# - ipv6 prefix-list v601
# - seq 125 deny 5000:1::/64
# - ip prefix-list v401
# - seq 25 deny 45.55.4.0/24
# - seq 100 permit 11.11.2.0/24 ge 32
# - ip prefix-list v402
# - seq 10 deny 10.1.1.0/24 ge 32
# after:
# - afi: ipv4
#   prefix_lists:
#   - entries:
#     - action: deny
#       address: 45.55.4.0/24
#       sequence: 25
#     - action: permit
#       address: 11.11.2.0/24
#       match:
#         masklen: 32
#         operator: ge
#       sequence: 100
#     name: v401
#   - entries:
#     - action: deny
#       address: 10.1.1.0/24
#       match:
#         masklen: 32
#         operator: ge
#       sequence: 10
#     name: v402
# - afi: ipv6
#   prefix_lists:
#   - entries:
#     - action: deny
#       address: 5000:1::/64
#       sequence: 125
#     name: v601


# After state:
# ------------
# veos#
# veos#show running-config | section prefix-list
# ip prefix-list v401
#    seq 25 deny 45.55.4.0/24
#    seq 100 permit 11.11.2.0/24 ge 32
# !
# ip prefix-list v402
#    seq 10 deny 10.1.1.0/24 ge 32
# !
# ipv6 prefix-list v601
#    seq 125 deny 5000:1::/64
# veos#


# Using merged:
# Failure scenario : 'merged' should not be used when an existing prefix-list (sequence number)
# is to be modified.


# veos#show running-config | section prefix-list
# ip prefix-list v401
#    seq 25 deny 45.55.4.0/24
#    seq 100 permit 11.11.2.0/24 ge 32
# !
# ip prefix-list v402
#    seq 10 deny 10.1.1.0/24 ge 32
# !
# ipv6 prefix-list v601
#    seq 125 deny 5000:1::/64
# veos#

- name: Merge provided configuration with device configuration
  arista.eos.eos_prefix_lists:
    config:
      - afi: "ipv4"
        prefix_lists:
          - name: "v401"
            entries:
              - sequence: 25
                action: "deny"
                address: "45.55.4.0/24"
                match:
                  masklen: 32
                  operator: "ge"
              - sequence: 100
                action: "permit"
                address: "11.11.2.0/24"
                match:
                  masklen: 32
                  operator: "ge"
          - name: "v402"
            entries:
              - action: "deny"
                address: "10.1.1.0/24"
                sequence: 10
                match:
                  masklen: 32
                  operator: "ge"
      - afi: "ipv6"
        prefix_lists:
          - name: "v601"
            entries:
              - sequence: 125
                action: "deny"
                address: "5000:1::/64"
    state: merged

# Task Output
# -------------
# changed: false
# invocation:
#   module_args:
#     config:
#     - afi: ipv4
#       prefix_lists:
#       - entries:
#         - action: deny
#           address: 45.55.4.0/24
#           match:
#             masklen: 32
#             operator: ge
#           resequence:
#           sequence: 25
#         - action: permit
#           address: 11.11.2.0/24
#           match:
#             masklen: 32
#             operator: ge
#           resequence:
#           sequence: 100
#         name: v401
#       - entries:
#         - action: deny
#           address: 10.1.1.0/24
#           match:
#             masklen: 32
#             operator: ge
#           resequence:
#           sequence: 10
#         name: v402
#     - afi: ipv6
#       prefix_lists:
#       - entries:
#         - action: deny
#           address: 5000:1::/64
#           match:
#           resequence:
#           sequence: 125
#         name: v601
#     running_config:
#     state: merged
# msg: Sequence number 25 is already present. Use replaced/overridden operation to change
#   the configuration


# Using Replaced:

# Before state:
# veos#show running-config | section prefix-list
# ip prefix-list v401
#    seq 25 deny 45.55.4.0/24
#    seq 100 permit 11.11.2.0/24 ge 32
# !
# ip prefix-list v402
#    seq 10 deny 10.1.1.0/24 ge 32
# !
# ipv6 prefix-list v601
#    seq 125 deny 5000:1::/64
# veos#


- name: Replace Provided configuration with given configuration
  arista.eos.eos_prefix_lists:
    config:
      - afi: "ipv4"
        prefix_lists:
          - name: "v401"
            entries:
              - sequence: 25
                action: "deny"
                address: "45.55.4.0/24"
                match:
                  masklen: 32
                  operator: "ge"
              - sequence: 200
                action: "permit"
                address: "200.11.2.0/24"
                match:
                  masklen: 32
                  operator: "ge"
    state: replaced


# Task Output
# -------------
# before:
# - afi: ipv4
#   prefix_lists:
#   - entries:
#     - action: deny
#       address: 45.55.4.0/24
#       sequence: 25
#     - action: permit
#       address: 11.11.2.0/24
#       match:
#         masklen: 32
#         operator: ge
#       sequence: 100
#     name: v401
#   - entries:
#     - action: deny
#       address: 10.1.1.0/24
#       match:
#         masklen: 32
#         operator: ge
#       sequence: 10
#     name: v402
# - afi: ipv6
#   prefix_lists:
#   - entries:
#     - action: deny
#       address: 5000:1::/64
#       sequence: 125
#     name: v601
# commands:
# - ip prefix-list v401
# - no seq 25
# - seq 25 deny 45.55.4.0/24 ge 32
# - seq 200 permit 200.11.2.0/24 ge 32
# - no seq 100
# - no ip prefix-list v402
# after:
# - afi: ipv4
#   prefix_lists:
#   - entries:
#     - action: deny
#       address: 45.55.4.0/24
#       match:
#         masklen: 32
#         operator: ge
#       sequence: 25
#     - action: permit
#       address: 200.11.2.0/24
#       match:
#         masklen: 32
#         operator: ge
#       sequence: 200
#     name: v401
# - afi: ipv6
#   prefix_lists:
#   - entries:
#     - action: deny
#       address: 5000:1::/64
#       sequence: 125
#     name: v601


# After State:
# veos#show running-config | section prefix-list
# ip prefix-list v401
#    seq 25 deny 45.55.4.0/24 ge 32
#    seq 200 permit 200.11.2.0/24 ge 32
# !
# ipv6 prefix-list v601
#    seq 125 deny 5000:1::/64
# veos#
#
#


# Using overridden:


# Before State:
# veos#show running-config | section prefix-list
# ip prefix-list v401
#    seq 25 deny 45.55.4.0/24 ge 32
#    seq 100 permit 11.11.2.0/24 ge 32
#    seq 200 permit 200.11.2.0/24 ge 32
# !
# ip prefix-list v402
#    seq 10 deny 10.1.1.0/24 ge 32
# !
# ipv6 prefix-list v601
#    seq 125 deny 5000:1::/64
# veos#

- name: Override
  arista.eos.eos_prefix_lists:
    config:
      - afi: "ipv4"
        prefix_lists:
          - name: "v401"
            entries:
              - sequence: 25
                action: "deny"
                address: "45.55.4.0/24"
              - sequence: 300
                action: "permit"
                address: "30.11.2.0/24"
                match:
                  masklen: 32
                  operator: "ge"
          - name: "v403"
            entries:
              - action: "deny"
                address: "10.1.1.0/24"
                sequence: 10
    state: overridden


# Task Output
# -------------
# before:
# - afi: ipv4
#   prefix_lists:
#   - entries:
#     - action: deny
#       address: 45.55.4.0/24
#       match:
#         masklen: 32
#         operator: ge
#       sequence: 25
#     - action: permit
#       address: 11.11.2.0/24
#       match:
#         masklen: 32
#         operator: ge
#       sequence: 100
#     - action: permit
#       address: 200.11.2.0/24
#       match:
#         masklen: 32
#         operator: ge
#       sequence: 200
#     name: v401
#   - entries:
#     - action: deny
#       address: 10.1.1.0/24
#       match:
#         masklen: 32
#         operator: ge
#       sequence: 10
#     name: v402
# - afi: ipv6
#   prefix_lists:
#   - entries:
#     - action: deny
#       address: 5000:1::/64
#       sequence: 125
#     name: v601
# commands:
# - no ipv6 prefix-list v601
# - ip prefix-list v401
# - seq 25 deny 45.55.4.0/24
# - seq 300 permit 30.11.2.0/24 ge 32
# - no seq 100
# - no seq 200
# - ip prefix-list v403
# - seq 10 deny 10.1.1.0/24
# - no ip prefix-list v402
# after:
# - afi: ipv4
#   prefix_lists:
#   - entries:
#     - action: deny
#       address: 45.55.4.0/24
#       match:
#         masklen: 32
#         operator: ge
#       sequence: 25
#     - action: permit
#       address: 30.11.2.0/24
#       match:
#         masklen: 32
#         operator: ge
#       sequence: 300
#     name: v401
#   - entries:
#     - action: deny
#       address: 10.1.1.0/24
#       sequence: 10
#     name: v403


# After State
# veos#
# veos#show running-config | section prefix-list
# ip prefix-list v401
#    seq 25 deny 45.55.4.0/24 ge 32
#    seq 300 permit 30.11.2.0/24 ge 32
# !
# ip prefix-list v403
#    seq 10 deny 10.1.1.0/24
# veos#

# Using deleted:

# Before State:
# veos#show running-config | section prefix-list
# ip prefix-list v401
#    seq 25 deny 45.55.4.0/24 ge 32
#    seq 100 permit 11.11.2.0/24 ge 32
#    seq 300 permit 30.11.2.0/24 ge 32
# !
# ip prefix-list v402
#    seq 10 deny 10.1.1.0/24 ge 32
# !
# ip prefix-list v403
#    seq 10 deny 10.1.1.0/24
# !
# ipv6 prefix-list v601
#    seq 125 deny 5000:1::/64
# veos#

- name: Delete device configuration
  arista.eos.eos_prefix_lists:
    config:
      - afi: "ipv6"
    state: deleted

# Task Output
# -------------
# before:
# - afi: ipv4
#   prefix_lists:
#   - entries:
#     - action: deny
#       address: 45.55.4.0/24
#       match:
#         masklen: 32
#         operator: ge
#       sequence: 25
#     - action: permit
#       address: 11.11.2.0/24
#       match:
#         masklen: 32
#         operator: ge
#       sequence: 100
#     - action: permit
#       address: 30.11.2.0/24
#       match:
#         masklen: 32
#         operator: ge
#       sequence: 300
#     name: v401
#   - entries:
#     - action: deny
#       address: 10.1.1.0/24
#       match:
#         masklen: 32
#         operator: ge
#       sequence: 10
#     name: v402
#   - entries:
#     - action: deny
#       address: 10.1.1.0/24
#       sequence: 10
#     name: v403
# - afi: ipv6
#   prefix_lists:
#   - entries:
#     - action: deny
#       address: 5000:1::/64
#       sequence: 125
#     name: v601
# commands:
# - no ipv6 prefix-list v601
# after:
# - afi: ipv4
#   prefix_lists:
#   - entries:
#     - action: deny
#       address: 45.55.4.0/24
#       match:
#         masklen: 32
#         operator: ge
#       sequence: 25
#     - action: permit
#       address: 11.11.2.0/24
#       match:
#         masklen: 32
#         operator: ge
#       sequence: 100
#     - action: permit
#       address: 30.11.2.0/24
#       match:
#         masklen: 32
#         operator: ge
#       sequence: 300
#     name: v401
#   - entries:
#     - action: deny
#       address: 10.1.1.0/24
#       match:
#         masklen: 32
#         operator: ge
#       sequence: 10
#     name: v402
#   - entries:
#     - action: deny
#       address: 10.1.1.0/24
#       sequence: 10
#     name: v403

# after State:
# veos#show running-config | section prefix-list
# ip prefix-list v401
#    seq 25 deny 45.55.4.0/24 ge 32
#    seq 100 permit 11.11.2.0/24 ge 32
#    seq 300 permit 30.11.2.0/24 ge 32
# !
# ip prefix-list v402
#    seq 10 deny 10.1.1.0/24 ge 32
# !
# ip prefix-list v403
#    seq 10 deny 10.1.1.0/24
#


# Using deleted


# Before state:
# veos#show running-config | section prefix-list
# ip prefix-list v401
#    seq 25 deny 45.55.4.0/24 ge 32
#    seq 100 permit 11.11.2.0/24 ge 32
#    seq 300 permit 30.11.2.0/24 ge 32
# !
# ip prefix-list v402
#    seq 10 deny 10.1.1.0/24 ge 32
# !
# ip prefix-list v403
#    seq 10 deny 10.1.1.0/24
# veos#

- name: Delete device configuration
  arista.eos.eos_prefix_lists:
    state: deleted


# Task Output
# -------------
# before:
# - afi: ipv4
#   prefix_lists:
#   - entries:
#     - action: deny
#       address: 45.55.4.0/24
#       match:
#         masklen: 32
#         operator: ge
#       sequence: 25
#     - action: permit
#       address: 11.11.2.0/24
#       match:
#         masklen: 32
#         operator: ge
#       sequence: 100
#     - action: permit
#       address: 30.11.2.0/24
#       match:
#         masklen: 32
#         operator: ge
#       sequence: 300
#     name: v401
#   - entries:
#     - action: deny
#       address: 10.1.1.0/24
#       match:
#         masklen: 32
#         operator: ge
#       sequence: 10
#     name: v402
#   - entries:
#     - action: deny
#       address: 10.1.1.0/24
#       sequence: 10
#     name: v403
# commands:
# - no ip prefix-list v401
# - no ip prefix-list v402
# - no ip prefix-list v403
# after: {}

# After State:
# veos#show running-config | section prefix-list
# veos#


# Using parsed:


# parse_prefix_lists.cfg
# ip prefix-list v401
#    seq 25 deny 45.55.4.0/24
#    seq 100 permit 11.11.2.0/24 ge 32
# !
# ip prefix-list v402
#    seq 10 deny 10.1.1.0/24
# !
# ipv6 prefix-list v601
#    seq 125 deny 5000:1::/64
#


- name: parse configs
  arista.eos.eos_prefix_lists:
    running_config: "{{ lookup('file', './parsed_prefix_lists.cfg') }}"
    state: parsed


# Task Output
# -------------
# parsed:
# - afi: ipv4
#   prefix_lists:
#   - entries:
#     - action: deny
#       address: 45.55.4.0/24
#       sequence: 25
#     - action: permit
#       address: 11.11.2.0/24
#       match:
#         masklen: 32
#         operator: ge
#       sequence: 100
#     name: v401
#   - entries:
#     - action: deny
#       address: 10.1.1.0/24
#       sequence: 10
#     name: v402
# - afi: ipv6
#   prefix_lists:
#   - entries:
#     - action: deny
#       address: 5000:1::/64
#       sequence: 125
#     name: v601


# Using rendered:

- name: Render provided configuration
  arista.eos.eos_prefix_lists:
    config:
      - afi: "ipv4"
        prefix_lists:
          - name: "v401"
            entries:
              - sequence: 25
                action: "deny"
                address: "45.55.4.0/24"
              - sequence: 200
                action: "permit"
                address: "200.11.2.0/24"
                match:
                  masklen: 32
                  operator: "ge"
          - name: "v403"
            entries:
              - action: "deny"
                address: "10.1.1.0/24"
                sequence: 10
    state: rendered

# Task Output
# -------------
# rendered:
# - ip prefix-list v401
# - seq 25 deny 45.55.4.0/24
# - seq 200 permit 200.11.2.0/24 ge 32
# - ip prefix-list v403
# - seq 10 deny 10.1.1.0/24

# using gathered:


# Device config:
# veos#show running-config | section prefix-list
# ip prefix-list v401
#    seq 25 deny 45.55.4.0/24
#    seq 100 permit 11.11.2.0/24 ge 32
# !
# ip prefix-list v402
#    seq 10 deny 10.1.1.0/24 ge 32
# !
# ipv6 prefix-list v601
#    seq 125 deny 5000:1::/64
# veos#

- name: gather configs
  arista.eos.eos_prefix_lists:
    state: gathered

# Task Output
# -------------
# gathered:
# - afi: ipv4
#   prefix_lists:
#   - entries:
#     - action: deny
#       address: 45.55.4.0/24
#       sequence: 25
#     - action: permit
#       address: 11.11.2.0/24
#       match:
#         masklen: 32
#         operator: ge
#       sequence: 100
#     name: v401
#   - entries:
#     - action: deny
#       address: 10.1.1.0/24
#       match:
#         masklen: 32
#         operator: ge
#       sequence: 10
#     name: v402
# - afi: ipv6
#   prefix_lists:
#   - entries:
#     - action: deny
#       address: 5000:1::/64
#       sequence: 125
#     name: v601

END_OF_DOCUMENT_MARKER

Значения возврата

Общие значения возврата документированы здесь, следующие являются полями, уникальными для данного модуля:

Ключ	Описание
after список / элементы=строка	Вызов модели конфигурации в результате. Возвращается: при изменении Пример: `["The configuration returned will always be in the same format\n of the parameters above.\n"]`
before список / элементы=строка	Конфигурация до вызова модели. Возвращается: всегда Пример: `["The configuration returned will always be in the same format\n of the parameters above.\n"]`
commands список / элементы=строка	Набор команд, отправленных на удалённое устройство. Возвращается: всегда Пример: `["ip prefix-list v401", "seq 25 deny 45.55.4.0/24", "seq 200 permit 200.11.2.0/24 ge 32", "ip prefix-list v403", "seq 10 deny 10.1.1.0/24"]`
gathered список / элементы=строка	Конфигурация в виде структурированных данных, преобразованная для текущей конфигурации, полученной с удаленного узла. Возвращается: Когда `state` собрано Пример: `["The configuration returned will always be in the same format of the parameters above.\n"]`
parsed список / элементы=строка	Конфигурация в виде структурированных данных, преобразованная для значения опции `running_config`. Возвращается: Когда `state` обработано Пример: `["The configuration returned will always be in the same format of the parameters above.\n"]`
rendered список / элементы=строка	Набор команд CLI, сгенерированных из значения в опции `config`. Возвращается: Когда `state` отображено Пример: `["- ip prefix-list v401 - seq 25 deny 45.55.4.0/24 - seq 200 permit 200.11.2.0/24 ge 32 - ip prefix-list v403 - seq 10 deny 10.1.1.0/24\n"]`

Авторы

Gomathi Selvi Srinivasan (@GomathiselviS)

Ссылки на сборку

© 2012–2018 Michael DeHaan
© 2018–2024 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/latest/collections/arista/eos/eos_prefix_lists_module.html