cisco.ios.ios_ospfv2 модуль — Модуль ресурсов для настройки OSPFv2.

Обзор

• Этот модуль настраивает и управляет протоколом Open Shortest Path First (OSPF) версии 2 на платформах IOS.

Псевдонимы: ospfv2

Параметры

Примечания

Примеры

# Using merged

# Before state:
# -------------
#
# router-ios#sh running-config | section ^router ospf
# router-ios#

- name: Merge provided OSPF V2 configuration
  cisco.ios.ios_ospfv2:
    config:
      processes:
        - process_id: 1
          max_metric:
            router_lsa: true
            on_startup:
              time: 110
          areas:
            - area_id: "5"
              capability: true
              authentication:
                enable: true
            - area_id: "10"
              authentication:
                message_digest: true
              nssa:
                default_information_originate:
                  metric: 10
                translate: suppress-fa
              default_cost: 10
              filter_list:
                - name: test_prefix_in
                  direction: in
                - name: test_prefix_out
                  direction: out
          network:
            - address: 198.51.100.0
              wildcard_bits: 0.0.0.255
              area: 5
          default_information:
            originate: true
          passive_interfaces:
            default: true
            interface:
              set_interface: false
              name:
                - GigabitEthernet0/1
                - GigabitEthernet0/2
        - process_id: 200
          vrf: blue
          domain_id:
            ip_address:
              address: 192.0.3.1
          max_metric:
            router_lsa: true
            on_startup:
              time: 100
          auto_cost:
            reference_bandwidth: 4
          areas:
            - area_id: "10"
              capability: true
          distribute_list:
            acls:
              - name: 10
                direction: out
              - name: 123
                direction: in
    state: merged

# Task Output:
# ------------

# before: {}
# commands:
#   - router ospf 200 vrf blue
#   - auto-cost reference-bandwidth 4
#   - domain-id 192.0.3.1
#   - max-metric router-lsa on-startup 100
#   - area 10 capability default-exclusion
#   - distribute-list 10 out
#   - distribute-list 123 in
#   - router ospf 1
#   - default-information originate
#   - max-metric router-lsa on-startup 110
#   - area 5 capability default-exclusion
#   - area 10 authentication message-digest
#   - area 10 default-cost 10
#   - area 10 nssa default-information-originate metric 10
#   - area 10 nssa translate type7 suppress-fa
#   - area 10 filter-list prefix test_prefix_in in
#   - area 10 filter-list prefix test_prefix_out out
#   - network 198.51.100.0 0.0.0.255 area 5
#   - passive-interface default
#   - no passive-interface GigabitEthernet0/1
#   - no passive-interface GigabitEthernet0/2

# after:
#     processes:
#     - areas:
#       - area_id: '10'
#         capability: true
#       auto_cost:
#         reference_bandwidth: 4
#         set: true
#       distribute_list:
#         acls:
#         - direction: out
#           name: '10'
#         - direction: in
#           name: '123'
#       domain_id:
#         ip_address:
#           address: 192.0.3.1
#       max_metric:
#         on_startup:
#           time: 100
#         router_lsa: true
#       process_id: 200
#       vrf: blue
#     - areas:
#       - area_id: '5'
#         capability: true
#       - area_id: '10'
#         authentication:
#           message_digest: true
#         default_cost: 10
#         filter_list:
#         - direction: in
#           name: test_prefix_in
#         - direction: out
#           name: test_prefix_out
#         nssa:
#           default_information_originate:
#             metric: 10
#           translate: suppress-fa
#       default_information:
#         originate: true
#       max_metric:
#         on_startup:
#           time: 110
#         router_lsa: true
#       network:
#       - address: 198.51.100.0
#         area: '5'
#         wildcard_bits: 0.0.0.255
#       passive_interfaces:
#         default: true
#         interface:
#           name:
#           - GigabitEthernet2
#           - GigabitEthernet1
#           set_interface: false
#       process_id: 1

# After state:
# ------------
#
# router-ios#sh running-config | section ^router ospf
# router ospf 200 vrf blue
#  domain-id 192.0.3.1
#  max-metric router-lsa on-startup 100
#  auto-cost reference-bandwidth 4
#  area 10 capability default-exclusion
#  distribute-list 10 out
#  distribute-list 123 in
# router ospf 1
#  max-metric router-lsa on-startup 110
#  area 5 capability default-exclusion
#  area 10 authentication message-digest
#  area 10 nssa default-information-originate metric 10
#  area 10 nssa translate type7 suppress-fa
#  area 10 default-cost 10
#  area 10 filter-list prefix test_prefix_in in
#  area 10 filter-list prefix test_prefix_out out
#  passive-interface default
#  no passive-interface GigabitEthernet1
#  no passive-interface GigabitEthernet2
#  network 198.51.100.0 0.0.0.255 area 5
#  default-information originate

# Using replaced

# Before state:
# -------------
#
# router-ios#sh running-config | section ^router ospf
# router ospf 200 vrf blue
#  domain-id 192.0.3.1
#  max-metric router-lsa on-startup 100
#  auto-cost reference-bandwidth 4
#  area 10 capability default-exclusion
#  distribute-list 10 out
#  distribute-list 123 in
# router ospf 1
#  max-metric router-lsa on-startup 110
#  area 5 capability default-exclusion
#  area 10 authentication message-digest
#  area 10 nssa default-information-originate metric 10
#  area 10 nssa translate type7 suppress-fa
#  area 10 default-cost 10
#  area 10 filter-list prefix test_prefix_in in
#  area 10 filter-list prefix test_prefix_out out
#  passive-interface default
#  no passive-interface GigabitEthernet1
#  no passive-interface GigabitEthernet2
#  network 198.51.100.0 0.0.0.255 area 5
#  default-information originate

- name: Replace running config with provided OSPF V2 configuration
  cisco.ios.ios_ospfv2:
    config:
      processes:
        - process_id: 200
          vrf: blue
          domain_id:
            ip_address:
              address: 192.0.4.1
          max_metric:
            router_lsa: true
            on_startup:
              time: 200
          maximum_paths: 15
          ttl_security:
            hops: 7
          areas:
            - area_id: "10"
              default_cost: 10
              authentication:
                message_digest: true
        - process_id: 100
          vrf: ospf_vrf
          domain_id:
            ip_address:
              address: 192.0.5.1
          auto_cost:
            reference_bandwidth: 5
          areas:
            - area_id: "5"
              authentication:
                message_digest: true
              nssa:
                default_information_originate:
                  metric: 10
                translate: suppress-fa
    state: replaced

# Task Output:
# ------------
#
# before:
#     processes:
#     - areas:
#       - area_id: '10'
#         capability: true
#       auto_cost:
#         reference_bandwidth: 4
#         set: true
#       distribute_list:
#         acls:
#         - direction: out
#           name: '10'
#         - direction: in
#           name: '123'
#       domain_id:
#         ip_address:
#           address: 192.0.3.1
#       max_metric:
#         on_startup:
#           time: 100
#         router_lsa: true
#       process_id: 200
#       vrf: blue
#     - areas:
#       - area_id: '5'
#         capability: true
#       - area_id: '10'
#         authentication:
#           message_digest: true
#         default_cost: 10
#         filter_list:
#         - direction: in
#           name: test_prefix_in
#         - direction: out
#           name: test_prefix_out
#         nssa:
#           default_information_originate:
#             metric: 10
#           translate: suppress-fa
#       default_information:
#         originate: true
#       max_metric:
#         on_startup:
#           time: 110
#         router_lsa: true
#       network:
#       - address: 198.51.100.0
#         area: '5'
#         wildcard_bits: 0.0.0.255
#       passive_interfaces:
#         default: true
#         interface:
#           name:
#           - GigabitEthernet2
#           - GigabitEthernet1
#           set_interface: false
#       process_id: 1
#
# commands:
# - router ospf 100 vrf ospf_vrf
# - auto-cost reference-bandwidth 5
# - domain-id 192.0.5.1
# - area 5 authentication message-digest
# - area 5 nssa translate type7 suppress-fa
# - area 5 nssa default-information-originate metric 10
# - router ospf 200 vrf blue
# - no auto-cost reference-bandwidth 4
# - no distribute-list 10 out
# - no distribute-list 123 in
# - domain-id 192.0.4.1
# - max-metric router-lsa on-startup 200
# - maximum-paths 15
# - ttl-security all-interfaces hops 7
# - area 10 authentication message-digest
# - no area 10 capability default-exclusion
# - area 10 default-cost 10
#     ]
#
# after:
#     processes:
#     - areas:
#       - area_id: '10'
#         authentication:
#           message_digest: true
#         default_cost: 10
#       domain_id:
#         ip_address:
#           address: 192.0.4.1
#       max_metric:
#         on_startup:
#           time: 200
#         router_lsa: true
#       maximum_paths: 15
#       process_id: 200
#       ttl_security:
#         hops: 7
#       vrf: blue
#     - areas:
#       - area_id: '5'
#         authentication:
#           message_digest: true
#         nssa:
#           default_information_originate:
#             metric: 10
#           translate: suppress-fa
#       auto_cost:
#         reference_bandwidth: 5
#         set: true
#       domain_id:
#         ip_address:
#           address: 192.0.5.1
#       process_id: 100
#       vrf: ospf_vrf
#     - areas:
#       - area_id: '5'
#         authentication:
#           enable: true
#         capability: true
#       - area_id: '10'
#         authentication:
#           message_digest: true
#         default_cost: 10
#         filter_list:
#         - direction: in
#           name: test_prefix_in
#         - direction: out
#           name: test_prefix_out
#         nssa:
#           default_information_originate:
#             metric: 10
#           translate: suppress-fa
#       default_information:
#         originate: true
#       max_metric:
#         on_startup:
#           time: 110
#         router_lsa: true
#       network:
#       - address: 198.51.100.0
#         area: '5'
#         wildcard_bits: 0.0.0.255
#       process_id: 1

# After state:
# -------------
# router-ios#sh running-config | section ^router ospf
# router ospf 200 vrf blue
#  domain-id 192.0.4.1
#  max-metric router-lsa on-startup 200
#  ttl-security all-interfaces hops 7
#  area 10 authentication message-digest
#  area 10 default-cost 10
#  maximum-paths 15
# router ospf 100 vrf ospf_vrf
#  domain-id 192.0.5.1
#  auto-cost reference-bandwidth 5
#  area 5 authentication message-digest
#  area 5 nssa default-information-originate metric 10
#  area 5 nssa translate type7 suppress-fa
# router ospf 1
#  max-metric router-lsa on-startup 110
#  area 5 capability default-exclusion
#  area 5 authentication
#  area 10 authentication message-digest
#  area 10 nssa default-information-originate metric 10
#  area 10 nssa translate type7 suppress-fa
#  area 10 default-cost 10
#  area 10 filter-list prefix test_prefix_in in
#  area 10 filter-list prefix test_prefix_out out
#  network 198.51.100.0 0.0.0.255 area 5
#  default-information originate

# Using overridden

# Before state:
# -------------
#
# router-ios#sh running-config | section ^router ospf
# router ospf 200 vrf blue
#  domain-id 192.0.3.1
#  max-metric router-lsa on-startup 100
#  auto-cost reference-bandwidth 4
#  area 10 capability default-exclusion
#  distribute-list 10 out
#  distribute-list 123 in
# router ospf 1
#  max-metric router-lsa on-startup 110
#  area 10 authentication message-digest
#  area 10 nssa default-information-originate metric 10
#  area 10 nssa translate type7 suppress-fa
#  area 10 default-cost 10
#  area 10 filter-list prefix test_prefix_out out
#  network 198.51.100.0 0.0.0.255 area 5
#  default-information originate

- name: Override provided OSPF V2 configuration
  cisco.ios.ios_ospfv2:
    config:
      processes:
        - process_id: 200
          vrf: blue
          domain_id:
            ip_address:
              address: 192.0.4.1
          max_metric:
            router_lsa: true
            on_startup:
              time: 200
          maximum_paths: 15
          ttl_security:
            hops: 7
          areas:
            - area_id: "10"
              default_cost: 10
              authentication:
                message_digest: true
        - process_id: 100
          vrf: ospf_vrf
          domain_id:
            ip_address:
              address: 192.0.5.1
          auto_cost:
            reference_bandwidth: 5
          areas:
            - area_id: "5"
              authentication:
                message_digest: true
              nssa:
                default_information_originate:
                  metric: 10
                translate: suppress-fa
    state: overridden

# Task Output:
# ------------

# before:
#     processes:
#     - areas:
#       - area_id: '10'
#         capability: true
#       auto_cost:
#         reference_bandwidth: 4
#         set: true
#       distribute_list:
#         acls:
#         - direction: out
#           name: '10'
#         - direction: in
#           name: '123'
#       domain_id:
#         ip_address:
#           address: 192.0.3.1
#       max_metric:
#         on_startup:
#           time: 100
#         router_lsa: true
#       process_id: 200
#       vrf: blue
#     - areas:
#       - area_id: '10'
#         authentication:
#           message_digest: true
#         default_cost: 10
#         filter_list:
#         - direction: out
#           name: test_prefix_out
#         nssa:
#           default_information_originate:
#             metric: 10
#           translate: suppress-fa
#       default_information:
#         originate: true
#       max_metric:
#         on_startup:
#           time: 110
#         router_lsa: true
#       network:
#       - address: 198.51.100.0
#         area: '5'
#         wildcard_bits: 0.0.0.255
#       process_id: 1
#
# commands:
# - no router ospf 1
# - router ospf 100 vrf ospf_vrf
# - auto-cost reference-bandwidth 5
# - domain-id 192.0.5.1
# - area 5 authentication message-digest
# - area 5 nssa translate type7 suppress-fa
# - area 5 nssa default-information-originate metric 10
# - router ospf 200 vrf blue
# - no auto-cost reference-bandwidth 4
# - no distribute-list 10 out
# - no distribute-list 123 in
# - domain-id 192.0.4.1
# - max-metric router-lsa on-startup 200
# - maximum-paths 15
# - ttl-security all-interfaces hops 7
# - area 10 authentication message-digest
# - no area 10 capability default-exclusion
# - area 10 default-cost 10
#
# after:
#     processes:
#     - areas:
#       - area_id: '10'
#         authentication:
#           message_digest: true
#         default_cost: 10
#       domain_id:
#         ip_address:
#           address: 192.0.4.1
#       max_metric:
#         on_startup:
#           time: 200
#         router_lsa: true
#       maximum_paths: 15
#       process_id: 200
#       ttl_security:
#         hops: 7
#       vrf: blue
#     - areas:
#       - area_id: '5'
#         authentication:
#           message_digest: true
#         nssa:
#           default_information_originate:
#             metric: 10
#           translate: suppress-fa
#       auto_cost:
#         reference_bandwidth: 5
#         set: true
#       domain_id:
#         ip_address:
#           address: 192.0.5.1
#       process_id: 100
#       vrf: ospf_vrf
#
# After state:
# ------------
#
# router-ios#sh running-config | section ^router ospf
# router ospf 200 vrf blue
#  domain-id 192.0.4.1
#  max-metric router-lsa on-startup 200
#  ttl-security all-interfaces hops 7
#  area 10 authentication message-digest
#  area 10 default-cost 10
#  maximum-paths 15
# router ospf 100 vrf ospf_vrf
#  domain-id 192.0.5.1
#  auto-cost reference-bandwidth 5
#  area 5 authentication message-digest
#  area 5 nssa default-information-originate metric 10
#  area 5 nssa translate type7 suppress-fa

# Using deleted

# Before state:
# -------------
#
# router-ios#sh running-config | section ^router ospf
# router ospf 200 vrf blue
#  domain-id 192.0.3.1
#  max-metric router-lsa on-startup 100
#  auto-cost reference-bandwidth 4
#  area 10 capability default-exclusion
#  distribute-list 10 out
#  distribute-list 123 in
# router ospf 1
#  max-metric router-lsa on-startup 110
#  area 10 authentication message-digest
#  area 10 nssa default-information-originate metric 10
#  area 10 nssa translate type7 suppress-fa
#  area 10 default-cost 10
#  area 10 filter-list prefix test_prefix_out out
#  network 198.51.100.0 0.0.0.255 area 5
#  default-information originate

- name: Delete provided OSPF V2 processes
  cisco.ios.ios_ospfv2:
    config:
      processes:
        - process_id: 1
        - process_id: 200
          vrf: blue
    state: deleted

# Task Output:
# ------------

# before:
#     processes:
#     - areas:
#       - area_id: '10'
#         capability: true
#       auto_cost:
#         reference_bandwidth: 4
#         set: true
#       distribute_list:
#         acls:
#         - direction: out
#           name: '10'
#         - direction: in
#           name: '123'
#       domain_id:
#         ip_address:
#           address: 192.0.3.1
#       max_metric:
#         on_startup:
#           time: 100
#         router_lsa: true
#       process_id: 200
#       vrf: blue
#     - areas:
#       - area_id: '10'
#         authentication:
#           message_digest: true
#         default_cost: 10
#         filter_list:
#         - direction: out
#           name: test_prefix_out
#         nssa:
#           default_information_originate:
#             metric: 10
#           translate: suppress-fa
#       default_information:
#         originate: true
#       max_metric:
#         on_startup:
#           time: 110
#         router_lsa: true
#       network:
#       - address: 198.51.100.0
#         area: '5'
#         wildcard_bits: 0.0.0.255
#       process_id: 1
#
# commands:
# - no router ospf 1
#
# processes:
#     - areas:
#       - area_id: '10'
#         capability: true
#       auto_cost:
#         reference_bandwidth: 4
#         set: true
#       distribute_list:
#         acls:
#         - direction: out
#           name: '10'
#         - direction: in
#           name: '123'
#       domain_id:
#         ip_address:
#           address: 192.0.3.1
#       max_metric:
#         on_startup:
#           time: 100
#         router_lsa: true
#       process_id: 200
#       vrf: blue
#
# After state:
# ------------
# router-ios#sh running-config | section ^router ospf
# router ospf 200 vrf blue
#  domain-id 192.0.3.1
#  max-metric router-lsa on-startup 100
#  auto-cost reference-bandwidth 4
#  area 10 capability default-exclusion
#  distribute-list 10 out
#  distribute-list 123 in

# Using deleted without any config passed (NOTE: This will delete all OSPFV2 configuration from device)

# Before state:
# -------------
#
# router-ios#sh running-config | section ^router ospf
# router ospf 200 vrf blue
#  domain-id 192.0.3.1
#  max-metric router-lsa on-startup 100
#  auto-cost reference-bandwidth 4
#  area 10 capability default-exclusion
#  distribute-list 10 out
#  distribute-list 123 in
# router ospf 1
#  max-metric router-lsa on-startup 110
#  area 10 authentication message-digest
#  area 10 nssa default-information-originate metric 10
#  area 10 nssa translate type7 suppress-fa
#  area 10 default-cost 10
#  area 10 filter-list prefix test_prefix_out out
#  network 198.51.100.0 0.0.0.255 area 5
#  default-information originate

- name: Delete all OSPF processes
  cisco.ios.ios_ospfv2:
    state: deleted

# Task Output:
# ------------

# before:
#     processes:
#     - areas:
#       - area_id: '10'
#         capability: true
#       auto_cost:
#         reference_bandwidth: 4
#         set: true
#       distribute_list:
#         acls:
#         - direction: out
#           name: '10'
#         - direction: in
#           name: '123'
#       domain_id:
#         ip_address:
#           address: 192.0.3.1
#       max_metric:
#         on_startup:
#           time: 100
#         router_lsa: true
#       process_id: 200
#       vrf: blue
#     - areas:
#       - area_id: '10'
#         authentication:
#           message_digest: true
#         default_cost: 10
#         filter_list:
#         - direction: out
#           name: test_prefix_out
#         nssa:
#           default_information_originate:
#             metric: 10
#           translate: suppress-fa
#       default_information:
#         originate: true
#       max_metric:
#         on_startup:
#           time: 110
#         router_lsa: true
#       network:
#       - address: 198.51.100.0
#         area: '5'
#         wildcard_bits: 0.0.0.255
#       process_id: 1
#
# commands:
# - no router ospf 200 vrf blue
# - no router ospf 1
#
# after: {}
#
# After state:
# ------------
# router-ios#sh running-config | section ^router ospf
# router-ios#

# Using Gathered

# Before state:
# -------------
#
# router-ios#sh running-config | section ^router ospf
# router ospf 200 vrf blue
#  domain-id 192.0.3.1
#  max-metric router-lsa on-startup 100
#  auto-cost reference-bandwidth 4
#  area 10 capability default-exclusion
#  distribute-list 10 out
#  distribute-list 123 in
# router ospf 1
#  max-metric router-lsa on-startup 110
#  area 10 authentication message-digest
#  area 10 nssa default-information-originate metric 10
#  area 10 nssa translate type7 suppress-fa
#  area 10 default-cost 10
#  area 10 filter-list prefix test_prefix_out out
#  network 198.51.100.0 0.0.0.255 area 5
#  default-information originate

- name: Gather OSPFV2 running configurations
  cisco.ios.ios_ospfv2:
    config:
    state: gathered

# Task Output:
# ------------
#
# gathered:
#     processes:
#     - areas:
#       - area_id: '10'
#         capability: true
#       auto_cost:
#         reference_bandwidth: 4
#         set: true
#       distribute_list:
#         acls:
#         - direction: out
#           name: '10'
#         - direction: in
#           name: '123'
#       domain_id:
#         ip_address:
#           address: 192.0.3.1
#       max_metric:
#         on_startup:
#           time: 100
#         router_lsa: true
#       process_id: 200
#       vrf: blue
#     - areas:
#       - area_id: '10'
#         authentication:
#           message_digest: true
#         default_cost: 10
#         filter_list:
#         - direction: out
#           name: test_prefix_out
#         nssa:
#           default_information_originate:
#             metric: 10
#           translate: suppress-fa
#       default_information:
#         originate: true
#       max_metric:
#         on_startup:
#           time: 110
#         router_lsa: true
#       network:
#       - address: 198.51.100.0
#         area: '5'
#         wildcard_bits: 0.0.0.255
#       process_id: 1


# After state:
# ------------
#
# router-ios#sh running-config | section ^router ospf
# router ospf 200 vrf blue
#  domain-id 192.0.3.1
#  max-metric router-lsa on-startup 100
#  auto-cost reference-bandwidth 4
#  area 10 capability default-exclusion
#  distribute-list 10 out
#  distribute-list 123 in
# router ospf 1
#  max-metric router-lsa on-startup 110
#  area 10 authentication message-digest
#  area 10 nssa default-information-originate metric 10
#  area 10 nssa translate type7 suppress-fa
#  area 10 default-cost 10
#  area 10 filter-list prefix test_prefix_out out
#  network 198.51.100.0 0.0.0.255 area 5
#  default-information originate

# Using Rendered

- name: Render the commands for provided  configuration
  cisco.ios.ios_ospfv2:
    config:
      processes:
        - process_id: 1
          max_metric:
            router_lsa: true
            on_startup:
              time: 110
          areas:
            - area_id: "5"
              capability: true
              authentication:
                enable: true
            - area_id: "10"
              authentication:
                message_digest: true
              nssa:
                default_information_originate:
                  metric: 10
                translate: suppress-fa
              default_cost: 10
              filter_list:
                - name: test_prefix_in
                  direction: in
                - name: test_prefix_out
                  direction: out
          network:
            - address: 198.51.100.0
              wildcard_bits: 0.0.0.255
              area: 5
          default_information:
            originate: true
        - process_id: 200
          vrf: blue
          domain_id:
            ip_address:
              address: 192.0.3.1
          max_metric:
            router_lsa: true
            on_startup:
              time: 100
          auto_cost:
            reference_bandwidth: 4
          areas:
            - area_id: "10"
              capability: true
          distribute_list:
            acls:
              - name: 10
                direction: out
              - name: 123
                direction: in
    state: rendered

# Task Output:
# ------------

# rendered:
# - router ospf 200 vrf blue
# - auto-cost reference-bandwidth 4
# - distribute-list 10 out
# - distribute-list 123 in
# - domain-id 192.0.3.1
# - max-metric router-lsa on-startup 100
# - area 10 capability default-exclusion
# - router ospf 1
# - default-information originate
# - max-metric router-lsa on-startup 110
# - network 198.51.100.0 0.0.0.255 area 5
# - area 10 authentication message-digest
# - area 10 default-cost 10
# - area 10 nssa translate type7 suppress-fa
# - area 10 nssa default-information-originate metric 10
# - area 10 filter-list prefix test_prefix_out out
# - area 10 filter-list prefix test_prefix_in in
# - area 5 authentication
# - area 5 capability default-exclusion
#

# Using Parsed

# File: parsed.cfg
# ----------------
#
# router ospf 100
#  auto-cost reference-bandwidth 5
#  domain-id 192.0.5.1
#  area 5 authentication message-digest
#  area 5 nssa translate type7 suppress-fa
#  area 5 nssa default-information-originate metric 10

- name: Parse the provided configuration with the existing running configuration
  cisco.ios.ios_ospfv2:
    running_config: "{{ lookup('file', 'parsed.cfg') }}"
    state: parsed

# Task Output:
# ------------

# parsed:
#     processes:
#     - areas:
#       - area_id: '5'
#         authentication:
#           message_digest: true
#         nssa:
#           default_information_originate:
#             metric: 10
#           translate: suppress-fa
#       auto_cost:
#         reference_bandwidth: 5
#         set: true
#       domain_id:
#         ip_address:
#           address: 192.0.5.1
#       process_id: 100

Значения возврата

Общие значения возврата документированы здесь, следующие поля уникальны для данного модуля: