arista.eos.eos_acls – Модуль ресурсов ACL

• Обзор
• Параметры
• Примечания
• Примеры
• Возвращаемые значения

Обзор

• Этот модуль управляет атрибутами списка управления доступом (ACL) IP-адресов интерфейсов Arista EOS.

Параметры

Примечания

Примеры

# Using merged

# Before state:
# -------------
# show running-config | section access-list
# ip access-list test1
#    10 permit ip 10.10.10.0/24 any ttl eq 200
#    20 permit ip 10.30.10.0/24 host 10.20.10.1
#    30 deny tcp host 10.10.20.1 eq finger www any syn log
#    40 permit ip any any
# ipv6 access-list test2
#     10 deny icmpv6 any any reject-route hop-limit eq 20

- name: Merge provided configuration with device configuration
  arista.eos.eos_acls:
    config:
    - afi: ipv4
      acls:
      - name: test1
        aces:
        - sequence: 35
          grant: deny
          protocol: ospf
          source:
            subnet_address: 20.0.0.0/8
          destnation:
            any: true
    state: merged

# After state:
# ------------
#
# show running-config | section access-list
# ip access-list test1
#    10 permit ip 10.10.10.0/24 any ttl eq 200
#    20 permit ip 10.30.10.0/24 host 10.20.10.1
#    30 deny tcp host 10.10.20.1 eq finger www any syn log
#    35 deny ospf 20.0.0.0/8 any
#    40 permit ip any any
# ipv6 access-list test2
#     10 deny icmpv6 any any reject-route hop-limit eq 20

# Using merged

# Before state:
# -------------
# show running-config | section access-list
# ip access-list test1
#    10 permit ip 10.10.10.0/24 any ttl eq 200
#    20 permit ip 10.30.10.0/24 host 10.20.10.1
#    30 deny tcp host 10.10.20.1 eq finger www any syn log
#    40 permit ip any any
# ipv6 access-list test2
#     10 deny icmpv6 any any reject-route hop-limit eq 20

- name: Merge to update the given configuration with an existing ace
  arista.eos.eos_acls:
    config:
    - afi: ipv4
      acls:
      - name: test1
        aces:
        - sequence: 35
          log: true
          ttl:
            eq: 33
    state: merged

# After state:
# ------------
#
# show running-config | section access-list
# ip access-list test1
#    10 permit ip 10.10.10.0/24 any ttl eq 200
#    20 permit ip 10.30.10.0/24 host 10.20.10.1
#    30 deny tcp host 10.10.20.1 eq finger www any syn log
#    35 deny ospf 20.0.0.0/8 any ttl eq 33 log
#    40 permit ip any any
# ipv6 access-list test2
#     10 deny icmpv6 any any reject-route hop-limit eq 20

# Using replaced

# Before state:
# -------------
# show running-config | section access-list
# ip access-list test1
#    10 permit ip 10.10.10.0/24 any ttl eq 200
#    20 permit ip 10.30.10.0/24 host 10.20.10.1
#    30 deny tcp host 10.10.20.1 eq finger www any syn log
#    40 permit ip any any
# !
# ip access-list test3
#    10 permit ip 35.33.0.0/16 any log
# !
# ipv6 access-list test2
#     10 deny icmpv6 any any reject-route hop-limit eq 20



- name: Replace device configuration with provided configuration
  arista.eos.eos_acls:
    config:
    - afi: ipv4
      acls:
      - name: test1
        aces:
        - sequence: 35
          grant: permit
          protocol: ospf
          source:
            subnet_address: 20.0.0.0/8
          destination:
            any: true
    state: replaced

# After state:
# ------------
#
# show running-config | section access-list
# ip access-list test1
#    35 permit ospf 20.0.0.0/8 any
# !
# ip access-list test3
#    10 permit ip 35.33.0.0/16 any log
# !
# ipv6 access-list test2
#     10 deny icmpv6 any any reject-route hop-limit eq 20


# Using overridden

# Before state:
# -------------
# show running-config | section access-list
# ip access-list test1
#    10 permit ip 10.10.10.0/24 any ttl eq 200
#    20 permit ip 10.30.10.0/24 host 10.20.10.1
#    30 deny tcp host 10.10.20.1 eq finger www any syn log
#    40 permit ip any any
# !
# ip access-list test3
#    10 permit ip 35.33.0.0/16 any log
# !
# ipv6 access-list test2
#     10 deny icmpv6 any any reject-route hop-limit eq 20



- name: override device configuration with  provided configuration
  arista.eos.eos_acls:
    config:
    - afi: ipv4
      acls:
      - name: test1
        aces:
        - sequence: 35
          action: permit
          protocol: ospf
          source:
            subnet_address: 20.0.0.0/8
          destination:
            any: true
    state: overridden

# After state:
# ------------
#
# show running-config | section access-list
# ip access-list test1
#    35 permit ospf 20.0.0.0/8 any
# !

# Using deleted:

# Before state:
# -------------
# show running-config | section access-list
# ip access-list test1
#    10 permit ip 10.10.10.0/24 any ttl eq 200
#    20 permit ip 10.30.10.0/24 host 10.20.10.1
#    30 deny tcp host 10.10.20.1 eq finger www any syn log
#    40 permit ip any any
# ipv6 access-list test2
#     10 deny icmpv6 any any reject-route hop-limit eq 20

# !

- name: Delete provided configuration
  arista.eos.eos_acls:
    config:
    - afi: ipv4
    state: deleted

# After state:
# ------------
#
# show running-config | section access-list

# ipv6 access-list test2
#     10 deny icmpv6 any any reject-route hop-limit eq 20



# Before state:
# -------------
# show running-config | section access-list
# ip access-list test1
#    10 permit ip 10.10.10.0/24 any ttl eq 200
#    20 permit ip 10.30.10.0/24 host 10.20.10.1
#    30 deny tcp host 10.10.20.1 eq finger www any syn log
#    40 permit ip any any
# ipv6 access-list test2
#     10 deny icmpv6 any any reject-route hop-limit eq 20

# !

- name: Delete provided configuration
  arista.eos.eos_acls:
    config:
    - afi: ipv4
      acls:
      - name: test1
    state: deleted

# After state:
# ------------
#
# show running-config | section access-list

# ipv6 access-list test2
#     10 deny icmpv6 any any reject-route hop-limit eq 20


# using gathered

# ip access-list test1
#    35 deny ospf 20.0.0.0/8 any
# ip access-list test2
#    40 permit vlan 55 0xE2 icmpv6 any any log

- name: Gather the exisitng condiguration
  arista.eos.eos_acls:
    state: gathered

# returns:


#  arista.eos.eos_acls:
#    config:
#     - afi: "ipv4"
#       acls:
#        - name: test1
#          aces:
#          - sequence: 35
#            grant: "deny"
#            protocol: "ospf"
#            source:
#              subnet_address: 20.0.0.0/8
#            destination:
#              any: true
#     - afi: "ipv6"
#       acls:
#        - name: test2
#          aces:
#           - sequence: 40
#             grant: "permit"
#             vlan: "55 0xE2"
#             protocol: "icmpv6"
#             log: true
#             source:
#               any: true
#             destination:
#               any: true


# using rendered

- name: Delete provided configuration
  arista.eos.eos_acls:
    config:
    - afi: ipv4
      acls:
      - name: test1
        aces:
        - sequence: 35
          grant: deny
          protocol: ospf
          source:
            subnet_address: 20.0.0.0/8
          destination:
            any: true
    - afi: ipv6
      acls:
      - name: test2
        aces:
        - sequence: 40
          grant: permit
          vlan: 55 0xE2
          protocol: icmpv6
          log: true
          source:
            any: true
          destination:
            any: true
    state: rendered

# returns:

# ip access-list test1
#    35 deny ospf 20.0.0.0/8 any
# ip access-list test2
#    40 permit vlan 55 0xE2 icmpv6 any any log


# Using Parsed

# parsed_acls.cfg

# ipv6 access-list standard test2
#    10 permit any log
# !
# ip access-list test1
#    35 deny ospf 20.0.0.0/8 any
#    45 remark Run by ansible
#    55 permit tcp any any
# !

- name: parse configs
  arista.eos.eos_acls:
    running_config: "{{ lookup('file', './parsed_acls.cfg') }}"
    state: parsed

# returns
# "parsed": [
#         {
#             "acls": [
#                 {
#                     "aces": [
#                         {
#                             "destination": {
#                                 "any": true
#                             },
#                             "grant": "deny",
#                             "protocol": "ospf",
#                             "sequence": 35,
#                             "source": {
#                                 "subnet_address": "20.0.0.0/8"
#                             }
#                         },
#                         {
#                             "remark": "Run by ansible",
#                             "sequence": 45
#                         },
#                         {
#                             "destination": {
#                                 "any": true
#                             },
#                             "grant": "permit",
#                             "protocol": "tcp",
#                             "sequence": 55,
#                             "source": {
#                                 "any": true
#                             }
#                         }
#                     ],
#                     "name": "test1"
#                 }
#             ],
#             "afi": "ipv4"
#         },
#         {
#             "acls": [
#                 {
#                     "aces": [
#                         {
#                             "grant": "permit",
#                             "log": true,
#                             "sequence": 10,
#                             "source": {
#                                 "any": true
#                             }
#                         }
#                     ],
#                     "name": "test2",
#                     "standard": true
#                 }
#             ],
#             "afi": "ipv6"
#         }
#     ]

Возвращаемые значения

Общие значения возврата описаны здесь, следующие являются полями, уникальными для данного модуля:

Авторы

• Gomathiselvi S (@GomathiselviS)