cisco.iosxr.iosxr_ospfv3 – модуль ресурсов ospfv3

• Обзор
• Параметры
• Примечания
• Примеры

Обзор

• Этот модуль управляет глобальной конфигурацией ospfv3 на устройствах, работающих под управлением Cisco IOS-XR

Параметры

Примечания

Примеры

# Using merged

# Before state:
# -------------
#
# RP/0/RP0/CPU0:anton#show running-config router ospfv3
# Thu Jun 11 15:54:44.569 UTC
# % No such configuration item(s)
#

- name: Merge provided OSPFv3 configuration with the existing configuration
  cisco.iosxr.iosxr_ospfv3:
    config:
      processes:
        - process_id: 27
          areas:
            - area_id: 10
              hello_interval: 2
        - process_id: 26
          authentication:
            disable: true
        - process_id: 10
          areas:
            - area_id: 11
              default_cost: 5
              cost: 11
            - area_id: 22
              default_cost: 6
        - process_id: 30
          areas:
            - area_id: 11
              default_cost: 5
            - area_id: 22
              default_cost: 6
          cost: 2
          default_metric: 10
          transmit_delay: 2
          hello_interval: 1
          dead_interval: 2
          retransmit_interval: 2
          packet_size: 577
          priority: 1
          router_id: '2.2.2.2'
          demand_circuit: true
          mtu_ignore: true
    state: merged

#
#
# ------------------------
# Module Execution Result
# ------------------------
#
#  "before": {}
#
#  "commands": [
#         "router ospfv3 10",
#         "area 11 default-cost 5",
#         "area 11 cost 11",
#         "area 22 default-cost 6",
#         "router ospfv3 26",
#         "authentication disable",
#         "router ospfv3 27",
#         "area 10 hello-interval 2",
#         "router ospfv3 30",
#         "cost 2",
#         "priority 1",
#         "default-metric 10",
#         "router-id 2.2.2.2",
#         "demand-circuit",
#         "packet-size 577",
#         "transmit-delay 2",
#         "dead-interval 2",
#         "hello-interval 1",
#         "retransmit-interval 2",
#         "mtu-ignore",
#         "area 11 default-cost 5",
#         "area 22 default-cost 6"
#    ]
#
#  "after": {
#         "processes": [
#             {
#                 "areas": [
#                     {
#                         "area_id": "11",
#                         "cost": 11,
#                         "default_cost": 5
#                     },
#                     {
#                         "area_id": "22",
#                         "default_cost": 6
#                     }
#                 ],
#                 "process_id": "10"
#             },
#             {
#                 "authentication": {
#                     "disable": true
#                 },
#                 "process_id": "26"
#             },
#             {
#                 "areas": [
#                     {
#                         "area_id": "10",
#                         "hello_interval": 2
#                     }
#                 ],
#                 "process_id": "27"
#             },
#             {
#                 "areas": [
#                     {
#                         "area_id": "11",
#                         "default_cost": 5
#                     },
#                     {
#                         "area_id": "22",
#                         "default_cost": 6
#                     }
#                 ],
#                 "cost": 2,
#                 "dead_interval": 2,
#                 "default_metric": 10,
#                 "demand_circuit": true,
#                 "hello_interval": 1,
#                 "mtu_ignore": true,
#                 "packet_size": 577,
#                 "priority": 1,
#                 "process_id": "30",
#                 "retransmit_interval": 2,
#                 "router_id": "2.2.2.2",
#                 "transmit_delay": 2
#             }
#         ]
#     }
#
#
# ------------
# After state
# ------------
#
# RP/0/RP0/CPU0:anton#show running-config router ospfv3
# router ospfv3 10
#  area 11
#   cost 11
#   default-cost 5
#  !
#  area 22
#   default-cost 6
#  !
# !
# router ospfv3 26
#  authentication disable
# !
# router ospfv3 27
#  area 10
#   hello-interval 2
#  !
#  area 20
#  !
#  area 30
#  !
# !
# router ospfv3 30
#  cost 2
#  priority 1
#  mtu-ignore
#  packet-size 577
#  dead-interval 2
#  retransmit-interval 2
#  demand-circuit
#  hello-interval 1
#  transmit-delay 2
#  router-id 2.2.2.2
#  default-metric 10
#  area 11
#   default-cost 5
#  !
#  area 22
#   default-cost 6
#  !
# router ospfv3 10
#  area 11
#   cost 11
#   default-cost 5
#  !
#  area 22
#   default-cost 6
#  !
# !
# router ospfv3 26
#  authentication disable
# !
# router ospfv3 27
#  area 10
#   hello-interval 2
#  !
#  area 20
#  !
#  area 30
#  !
# !
# router ospfv3 30
#  cost 2
#  priority 1
#  mtu-ignore
#  packet-size 577
#  dead-interval 2
#  retransmit-interval 2
#  demand-circuit
#  hello-interval 1
#  transmit-delay 2
#  router-id 2.2.2.2
#  default-metric 10
#  area 11
#   default-cost 5
#  !
#  area 22
#   default-cost 6
#  !
# !



# Using replaced
#
# ------------
# Before state
# ------------
#
#
# RP/0/RP0/CPU0:anton#show running-config router ospf
# router ospfv3 10
#  area 11
#   cost 11
#   default-cost 5
#  !
#  area 22
#   default-cost 6
#  !
# !
# router ospfv3 26
#  authentication disable
# !
# router ospfv3 27
#  area 10
#   hello-interval 2
#  !
#  area 20
#  !
#  area 30
#  !
# !
# router ospfv3 30
#  cost 2
#  priority 1
#  mtu-ignore
#  packet-size 577
#  dead-interval 2
#  retransmit-interval 2
#  demand-circuit
#  hello-interval 1
#  transmit-delay 2
#  router-id 2.2.2.2
#  default-metric 10
#  area 11
#   default-cost 5
#  !
#  area 22
#   default-cost 6
#  !
# router ospfv3 10
#  area 11
#   cost 11
#   default-cost 5
#  !
#  area 22
#   default-cost 6
#  !
# !
# router ospfv3 26
#  authentication disable
# !
# router ospfv3 27
#  area 10
#   hello-interval 2
#  !
#  area 20
#  !
#  area 30
#  !
# !
# router ospfv3 30
#  cost 2
#  priority 1
#  mtu-ignore
#  packet-size 577
#  dead-interval 2
#  retransmit-interval 2
#  demand-circuit
#  hello-interval 1
#  transmit-delay 2
#  router-id 2.2.2.2
#  default-metric 10
#  area 11
#   default-cost 5
#  !
#  area 22
#   default-cost 6
#  !
# !

- name: Replace OSPFv3 routes configurations from the device
  cisco.iosxr.iosxr_ospfv3:
    config:
      processes:
        - process_id: 27
          areas:
            - area_id: 10
              hello_interval: 2
            - area_id: 20
              cost: 2
              default_cost: 2
        - process_id: 26
          authentication:
            disable: true
    state: replaced

#
#
# ------------------------
# Module Execution Result
# ------------------------
#
#  "before": {
#         "processes": [
#             {
#                 "areas": [
#                     {
#                         "area_id": "11",
#                         "cost": 11,
#                         "default_cost": 5
#                     },
#                     {
#                         "area_id": "22",
#                         "default_cost": 6
#                     }
#                 ],
#                 "process_id": "10"
#             },
#             {
#                 "authentication": {
#                     "disable": true
#                 },
#                 "process_id": "26"
#             },
#             {
#                 "areas": [
#                     {
#                         "area_id": "10",
#                         "hello_interval": 2
#                     }
#                 ],
#                 "process_id": "27"
#             },
#             {
#                 "areas": [
#                     {
#                         "area_id": "11",
#                         "default_cost": 5
#                     },
#                     {
#                         "area_id": "22",
#                         "default_cost": 6
#                     }
#                 ],
#                 "cost": 2,
#                 "dead_interval": 2,
#                 "default_metric": 10,
#                 "demand_circuit": true,
#                 "hello_interval": 1,
#                 "mtu_ignore": true,
#                 "packet_size": 577,
#                 "priority": 1,
#                 "process_id": "30",
#                 "retransmit_interval": 2,
#                 "router_id": "2.2.2.2",
#                 "transmit_delay": 2
#             }
#         ]
#     }
#
#  "commands": [
#         "router ospfv3 27",
#         "area 20 default-cost 2",
#         "area 20 cost 2"
#     ]
#
#  "after": {
#         "processes": [
#             {
#                 "areas": [
#                     {
#                         "area_id": "11",
#                         "cost": 11,
#                         "default_cost": 5
#                     },
#                     {
#                         "area_id": "22",
#                         "default_cost": 6
#                     }
#                 ],
#                 "process_id": "10"
#             },
#             {
#                 "authentication": {
#                     "disable": true
#                 },
#                 "process_id": "26"
#             },
#             {
#                 "areas": [
#                     {
#                         "area_id": "10",
#                         "hello_interval": 2
#                     },
#                     {
#                         "area_id": "20",
#                         "cost": 2,
#                         "default_cost": 2
#                     }
#                 ],
#                 "process_id": "27"
#             },
#             {
#                 "areas": [
#                     {
#                         "area_id": "11",
#                         "default_cost": 5
#                     },
#                     {
#                         "area_id": "22",
#                         "default_cost": 6
#                     }
#                 ],
#                 "cost": 2,
#                 "dead_interval": 2,
#                 "default_metric": 10,
#                 "demand_circuit": true,
#                 "hello_interval": 1,
#                 "mtu_ignore": true,
#                 "packet_size": 577,
#                 "priority": 1,
#                 "process_id": "30",
#                 "retransmit_interval": 2,
#                 "router_id": "2.2.2.2",
#                 "transmit_delay": 2
#             }
#         ]
#     }
#
#
# -----------
# After state
# -----------
#
# RP/0/RP0/CPU0:anton(config)#do show running-config router ospfv3
# router ospfv3 10
#  area 11
#   cost 11
#   default-cost 5
#  !
#  area 22
#   default-cost 6
#  !
# !
# router ospfv3 26
#  authentication disable
# !
# router ospfv3 27
#  area 10
#   hello-interval 2
#  !
#  area 20
#   cost 2
#   default-cost 2
#  !
#  area 30
#  !
# !
# router ospfv3 30
#  cost 2
#  priority 1
#  mtu-ignore
#  packet-size 577
#  dead-interval 2
#  retransmit-interval 2
#  demand-circuit
#  hello-interval 1
#  transmit-delay 2
#  router-id 2.2.2.2
#  default-metric 10
#  area 11
#   default-cost 5
#  !
#  area 22
#   default-cost 6
#  !
# !


- name: Override existing OSPFv3 configurations from the device
  cisco.iosxr.iosxr_ospfv3:
    config:
      processes:
        - process_id: 27
          areas:
            - area_id: 10
              hello_interval: 2
              authentication:
                disable: true
            - area_id: 20
              cost: 2
              default_cost: 2
              authentication:
                disable: true
        - process_id: 26
          areas:
            - area_id: 10
              hello_interval: 2
              authentication:
                disable: true
    state: overridden

#
#
# ------------------------
# Module Execution Result
# ------------------------
#
#  "before": {
#         "processes": [
#             {
#                 "areas": [
#                     {
#                         "area_id": "11",
#                         "cost": 11,
#                         "default_cost": 5
#                     },
#                     {
#                         "area_id": "22",
#                         "default_cost": 6
#                     }
#                 ],
#                 "process_id": "10"
#             },
#             {
#                 "authentication": {
#                     "disable": true
#                 },
#                 "process_id": "26"
#             },
#             {
#                 "areas": [
#                     {
#                         "area_id": "10",
#                         "hello_interval": 2
#                     },
#                     {
#                         "area_id": "20",
#                         "cost": 2,
#                         "default_cost": 2
#                     }
#                 ],
#                 "process_id": "27"
#             },
#             {
#                 "areas": [
#                     {
#                         "area_id": "11",
#                         "default_cost": 5
#                     },
#                     {
#                         "area_id": "22",
#                         "default_cost": 6
#                     }
#                 ],
#                 "cost": 2,
#                 "dead_interval": 2,
#                 "default_metric": 10,
#                 "demand_circuit": true,
#                 "hello_interval": 1,
#                 "mtu_ignore": true,
#                 "packet_size": 577,
#                 "priority": 1,
#                 "process_id": "30",
#                 "retransmit_interval": 2,
#                 "router_id": "2.2.2.2",
#                 "transmit_delay": 2
#             }
#         ]
#     }
#
#  "commands": [
#         "router ospfv3 10",
#         "no area 11 default-cost 5",
#         "no area 11 cost 11",
#         "no area 22 default-cost 6",
#         "router ospfv3 30",
#         "no cost 2",
#         "no priority 1",
#         "no default-metric 10",
#         "no router-id 2.2.2.2",
#         "no demand-circuit",
#         "no packet-size 577",
#         "no transmit-delay 2",
#         "no dead-interval 2",
#         "no hello-interval 1",
#         "no retransmit-interval 2",
#         "no mtu-ignore",
#         "no area 11 default-cost 5",
#         "no area 22 default-cost 6",
#         "router ospfv3 26",
#         "area 10 hello-interval 4"
#     ]
#
#  "after": {
#         "processes": [
#             {
#                 "process_id": "10"
#             },
#             {
#                 "areas": [
#                     {
#                         "area_id": "10",
#                         "hello_interval": 4
#                     }
#                 ],
#                 "authentication": {
#                     "disable": true
#                 },
#                 "process_id": "26"
#             },
#             {
#                 "areas": [
#                     {
#                         "area_id": "10",
#                         "hello_interval": 2
#                     },
#                     {
#                         "area_id": "20",
#                         "cost": 2,
#                         "default_cost": 2
#                     }
#                 ],
#                 "process_id": "27"
#             },
#             {
#                 "process_id": "30"
#             }
#         ]
#     }
#
#
# -----------
# After state
# -----------
#
# RP/0/RP0/CPU0:anton#show running-config router ospfv3
# router ospfv3 10
#  area 11
#  !
#  area 22
#  !
# !
# router ospfv3 26
#  authentication disable
#  area 10
#   hello-interval 4
#  !
# !
# router ospfv3 27
#  area 10
#   hello-interval 2
#  !
#  area 20
#   cost 2
#   default-cost 2
#  !
#  area 30
#  !
# !
# router ospfv3 30
#  area 11
#  !
#  area 22
#  !
# !



# Using deleted
#
# ------------
# Before state
# ------------
#
#
# RP/0/RP0/CPU0:anton#show running-config router ospfv3
# router ospfv3 10
#  area 11
#  !
#  area 22
#  !
# !
# router ospfv3 26
#  authentication disable
#  area 10
#   hello-interval 4
#  !
# !
# router ospfv3 27
#  area 10
#   hello-interval 2
#  !
#  area 20
#   cost 2
#   default-cost 2
#  !
#  area 30
#  !
# !
# router ospfv3 30
#  area 11
#  !
#  area 22
#  !
# !

- name: Deleted existing OSPFv3 configurations from the device
  cisco.iosxr.iosxr_ospfv3:
    config:
      processes:
      - process_id: '10'
      - process_id: '26'
      - process_id: '27'
      - process_id: '30'
    state: deleted

#
#
# ------------------------
# Module Execution Result
# ------------------------
#
#  "before": {
#         "processes": [
#             {
#                 "process_id": "10"
#             },
#             {
#                 "areas": [
#                     {
#                         "area_id": "10",
#                         "hello_interval": 4
#                     }
#                 ],
#                 "authentication": {
#                     "disable": true
#                 },
#                 "process_id": "26"
#             },
#             {
#                 "areas": [
#                     {
#                         "area_id": "10",
#                         "hello_interval": 2
#                     },
#                     {
#                         "area_id": "20",
#                         "cost": 2,
#                         "default_cost": 2
#                     }
#                 ],
#                 "process_id": "27"
#             },
#             {
#                 "process_id": "30"
#             }
#         ]
#     },
#
#  "commands": [
#         "router ospfv3 26",
#         "no authentication disable",
#         "no area 10 hello-interval 4",
#         "router ospfv3 27",
#         "no area 10 hello-interval 2",
#         "no area 20 default-cost 2",
#         "no area 20 cost 2"
#     ]
#
#  "after": {
#        "processes": [
#            {
#                "process_id": "10"
#            },
#            {
#                "process_id": "26"
#            },
#            {
#                "process_id": "27"
#            },
#            {
#                "process_id": "30"
#            }
#        ]
#    }
#
#
# -----------
# After state
# -----------
#
# RP/0/RP0/CPU0:anton(config)#show running-config router ospfv3
# router ospfv3 10
# !
# router ospfv3 26
# !
# router ospfv3 27
# !
# router ospfv3 30
# !


# Using parsed
# parsed.cfg
# ------------
# router ospfv3 10
#  area 11
#   cost 11
#   default-cost 5
#  !
#  area 22
#   default-cost 6
#  !
# !
# router ospfv3 26
#  authentication disable
# !
# router ospfv3 27
#  area 10
#   hello-interval 2
#  !
# !
# router ospfv3 30
#  router-id 2.2.2.2
#  cost 2
#  packet-size 577
#  priority 1
#  mtu-ignore
#  dead-interval 2
#  retransmit-interval 2
#  demand-circuit
#  hello-interval 1
#  transmit-delay 2
#  default-metric 10
#  area 11
#   default-cost 5
#  !
#  area 22
#   default-cost 6
#  !
# !
- name: Parsed the device configuration to get output commands
  cisco.iosxr.iosxr_ospfv3:
    running_config: "{{ lookup('file', './parsed.cfg') }}"
    state: parsed
#
#
# -------------------------
# Module Execution Result
# -------------------------
#
#
# "parsed": {
#         "processes": [
#             {
#                 "areas": [
#                     {
#                         "area_id": "11",
#                         "cost": 11,
#                         "default_cost": 5
#                     },
#                     {
#                         "area_id": "22",
#                         "default_cost": 6
#                     }
#                 ],
#                 "process_id": "10"
#             },
#             {
#                 "authentication": {
#                     "disable": true
#                 },
#                 "process_id": "26"
#             },
#             {
#                 "areas": [
#                     {
#                         "area_id": "10",
#                         "hello_interval": 2
#                     }
#                 ],
#                 "process_id": "27"
#             },
#             {
#                 "areas": [
#                     {
#                         "area_id": "11",
#                         "default_cost": 5
#                     },
#                     {
#                         "area_id": "22",
#                         "default_cost": 6
#                     }
#                 ],
#                 "cost": 2,
#                 "dead_interval": 2,
#                 "default_metric": 10,
#                 "demand_circuit": true,
#                 "hello_interval": 1,
#                 "mtu_ignore": true,
#                 "packet_size": 577,
#                 "priority": 1,
#                 "process_id": "30",
#                 "retransmit_interval": 2,
#                 "router_id": "2.2.2.2",
#                 "transmit_delay": 2
#             }
#         ]
#     }
#
# Using rendered
#
#
- name: Render the commands for provided  configuration
  cisco.iosxr.iosxr_ospfv3:
    config:
      processes:
        - process_id: 27
          areas:
            - area_id: 10
              hello_interval: 2
        - process_id: 26
          authentication:
            disable: true
        - process_id: 10
          areas:
            - area_id: 11
              default_cost: 5
              cost: 11
            - area_id: 22
              default_cost: 6
        - process_id: 30
          areas:
            - area_id: 11
              default_cost: 5
            - area_id: 22
              default_cost: 6
          cost: 2
          default_metric: 10
          transmit_delay: 2
          hello_interval: 1
          dead_interval: 2
          retransmit_interval: 2
          packet_size: 577
          priority: 1
          router_id: '2.2.2.2'
          demand_circuit: true
          mtu_ignore: true
    state: rendered

#
#
# -------------------------
# Module Execution Result
# -------------------------
#
#
# "rendered": [
#         "router ospfv3 27",
#         "area 10 hello-interval 2",
#         "router ospfv3 26",
#         "authentication disable",
#         "router ospfv3 10",
#         "area 11 default-cost 5",
#         "area 11 cost 11",
#         "area 22 default-cost 6",
#         "router ospfv3 30",
#         "cost 2",
#         "priority 1",
#         "default-metric 10",
#         "router-id 2.2.2.2",
#         "demand-circuit",
#         "packet-size 577",
#         "transmit-delay 2",
#         "dead-interval 2",
#         "hello-interval 1",
#         "retransmit-interval 2",
#         "mtu-ignore",
#         "area 11 default-cost 5",
#         "area 22 default-cost 6"
#     ]


# Using gathered
#
# Before state:
# -------------
#
# RP/0/RP0/CPU0:anton#show running-config router ospf
# router ospfv3 10
#  area 11
#   cost 11
#   default-cost 5
#  !
#  area 22
#   default-cost 6
#  !
# !
# router ospfv3 26
#  authentication disable
#  area 10
#  !
# !
# router ospfv3 27
#  area 10
#   hello-interval 2
#  !
#  area 20
#  !
#  area 30
#  !
# !
# router ospfv3 30
#  cost 2
#  priority 1
#  mtu-ignore
#  packet-size 577
#  dead-interval 2
#  retransmit-interval 2
#  demand-circuit
#  hello-interval 1
#  transmit-delay 2
#  router-id 2.2.2.2
#  default-metric 10
#  area 11
#   default-cost 5
#  !
#  area 22
#   default-cost 6
#  !
# !

- name: Gather ospfv3 routes configuration
  cisco.iosxr.iosxr_ospfv3:
    state: gathered
#
#
# -------------------------
# Module Execution Result
# -------------------------
#
#    "gathered": {
#         "processes": [
#             {
#                 "areas": [
#                     {
#                         "area_id": "11",
#                         "cost": 11,
#                         "default_cost": 5
#                     },
#                     {
#                         "area_id": "22",
#                         "default_cost": 6
#                     }
#                 ],
#                 "process_id": "10"
#             },
#             {
#                 "authentication": {
#                     "disable": true
#                 },
#                 "process_id": "26"
#             },
#             {
#                 "areas": [
#                     {
#                         "area_id": "10",
#                         "hello_interval": 2
#                     }
#                 ],
#                 "process_id": "27"
#             },
#             {
#                 "areas": [
#                     {
#                         "area_id": "11",
#                         "default_cost": 5
#                     },
#                     {
#                         "area_id": "22",
#                         "default_cost": 6
#                     }
#                 ],
#                 "cost": 2,
#                 "dead_interval": 2,
#                 "default_metric": 10,
#                 "demand_circuit": true,
#                 "hello_interval": 1,
#                 "mtu_ignore": true,
#                 "packet_size": 577,
#                 "priority": 1,
#                 "process_id": "30",
#                 "retransmit_interval": 2,
#                 "router_id": "2.2.2.2",
#                 "transmit_delay": 2
#             }
#         ]
#     }
#

Авторы

• Rohit Thakur (@rohitthakur2590)