fortinet.fortimanager.fmgr_firewall_vip – Настройка виртуального IP для IPv4.
Примечание
Этот плагин является частью коллекции fortinet.fortimanager (версия 1.0.5).
Для его установки используйте: ansible-galaxy collection install fortinet.fortimanager.
Для использования в книге задач укажите: fortinet.fortimanager.fmgr_firewall_vip.
Новое в версии 2.10: модуля fortinet.fortimanager
Обзор
- Этот модуль позволяет настроить устройство FortiManager, позволяя пользователю [ добавить получить установить обновить ] следующие API.
- /pm/config/adom/{adom}/obj/firewall/vip
- /pm/config/global/obj/firewall/vip
- Примеры включают все параметры и значения, которые необходимо скорректировать перед использованием.
Параметры
| Параметр | Варианты/Значения по умолчанию | Комментарии |
|---|---|---|
| loose_validation boolean |
| Проверка параметров выполняется в свободном режиме |
| method строка / обязательно |
| Метод запроса |
| params список / элементы=строка | Параметры для каждого метода Полный список параметров см. на https://ansible-galaxy-fortimanager-docs.readthedocs.io/en/latest | |
| url_params словарь | Параметры для URL каждого запроса API Также см. полный список параметров URL на https://ansible-galaxy-fortimanager-docs.readthedocs.io/en/latest | |
| workspace_locking_adom строка | Имя домена для блокировки в случае работы FortiManager в режиме рабочего пространства Может быть глобальным или любым другим именем настраиваемого домена | |
| workspace_locking_timeout целое число | По умолчанию: 300 | Максимальное время в секундах ожидания, пока другой пользователь не разблокирует рабочее пространство. |
Примечания
Примечание
- Существует только три параметра верхнего уровня, где «method» всегда требуется, а «params» и «url_params» могут быть необязательными.
- Из-за сложности схемы API fortimanager, проверка выполняется вне процедуры проверки параметров Ansible.
- Синтаксис OPTIONS не соответствует стандартной спецификации аргументов Ansible, но для структуры схемы API fortimanager нам требуется тривиальное преобразование при заполнении книги задач Ansible.
Примеры
- hosts: fortimanager-inventory
collections:
- fortinet.fortimanager
connection: httpapi
vars:
ansible_httpapi_use_ssl: True
ansible_httpapi_validate_certs: False
ansible_httpapi_port: 443
tasks:
- name: REQUESTING /PM/CONFIG/OBJ/FIREWALL/VIP
fmgr_firewall_vip:
loose_validation: False
workspace_locking_adom: <value in [global, custom adom]>
workspace_locking_timeout: 300
method: <value in [add, set, update]>
url_params:
adom: <value in [none, global, custom dom]>
params:
-
data:
-
arp-reply: <value in [disable, enable]>
color: <value of integer>
comment: <value of string>
dns-mapping-ttl: <value of integer>
dynamic_mapping:
-
_scope:
-
name: <value of string>
vdom: <value of string>
arp-reply: <value in [disable, enable]>
color: <value of integer>
comment: <value of string>
dns-mapping-ttl: <value of integer>
extaddr: <value of string>
extintf: <value of string>
extip: <value of string>
extport: <value of string>
gratuitous-arp-interval: <value of integer>
http-cookie-age: <value of integer>
http-cookie-domain: <value of string>
http-cookie-domain-from-host: <value in [disable, enable]>
http-cookie-generation: <value of integer>
http-cookie-path: <value of string>
http-cookie-share: <value in [disable, same-ip]>
http-ip-header: <value in [disable, enable]>
http-ip-header-name: <value of string>
http-multiplex: <value in [disable, enable]>
https-cookie-secure: <value in [disable, enable]>
id: <value of integer>
ldb-method: <value in [static, round-robin, weighted, ...]>
mapped-addr: <value of string>
mappedip:
- <value of string>
mappedport: <value of string>
max-embryonic-connections: <value of integer>
monitor:
- <value of string>
nat-source-vip: <value in [disable, enable]>
outlook-web-access: <value in [disable, enable]>
persistence: <value in [none, http-cookie, ssl-session-id]>
portforward: <value in [disable, enable]>
portmapping-type: <value in [1-to-1, m-to-n]>
protocol: <value in [tcp, udp, sctp, ...]>
realservers:
-
client-ip:
- <value of string>
healthcheck: <value in [disable, enable, vip]>
holddown-interval: <value of integer>
http-host: <value of string>
ip: <value of string>
max-connections: <value of integer>
monitor: <value of string>
port: <value of integer>
seq: <value of integer>
status: <value in [active, standby, disable]>
weight: <value of integer>
server-type: <value in [http, https, ssl, ...]>
service: <value of string>
src-filter:
- <value of string>
srcintf-filter:
- <value of string>
ssl-algorithm: <value in [high, medium, low, ...]>
ssl-certificate: <value of string>
ssl-cipher-suites:
-
cipher: <value in [TLS-RSA-WITH-RC4-128-MD5, TLS-RSA-WITH-RC4-128-SHA, TLS-RSA-WITH-DES-CBC-SHA, ...]>
id: <value of integer>
versions:
- <value in [ssl-3.0, tls-1.0, tls-1.1, ...]>
ssl-client-fallback: <value in [disable, enable]>
ssl-client-renegotiation: <value in [deny, allow, secure]>
ssl-client-session-state-max: <value of integer>
ssl-client-session-state-timeout: <value of integer>
ssl-client-session-state-type: <value in [disable, time, count, ...]>
ssl-dh-bits: <value in [768, 1024, 1536, ...]>
ssl-hpkp: <value in [disable, enable, report-only]>
ssl-hpkp-age: <value of integer>
ssl-hpkp-backup: <value of string>
ssl-hpkp-include-subdomains: <value in [disable, enable]>
ssl-hpkp-primary: <value of string>
ssl-hpkp-report-uri: <value of string>
ssl-hsts: <value in [disable, enable]>
ssl-hsts-age: <value of integer>
ssl-hsts-include-subdomains: <value in [disable, enable]>
ssl-http-location-conversion: <value in [disable, enable]>
ssl-http-match-host: <value in [disable, enable]>
ssl-max-version: <value in [ssl-3.0, tls-1.0, tls-1.1, ...]>
ssl-min-version: <value in [ssl-3.0, tls-1.0, tls-1.1, ...]>
ssl-mode: <value in [half, full]>
ssl-pfs: <value in [require, deny, allow]>
ssl-send-empty-frags: <value in [disable, enable]>
ssl-server-algorithm: <value in [high, low, medium, ...]>
ssl-server-max-version: <value in [ssl-3.0, tls-1.0, tls-1.1, ...]>
ssl-server-min-version: <value in [ssl-3.0, tls-1.0, tls-1.1, ...]>
ssl-server-session-state-max: <value of integer>
ssl-server-session-state-timeout: <value of integer>
ssl-server-session-state-type: <value in [disable, time, count, ...]>
type: <value in [static-nat, load-balance, server-load-balance, ...]>
uuid: <value of string>
weblogic-server: <value in [disable, enable]>
websphere-server: <value in [disable, enable]>
extaddr: <value of string>
extintf: <value of string>
extip: <value of string>
extport: <value of string>
gratuitous-arp-interval: <value of integer>
http-cookie-age: <value of integer>
http-cookie-domain: <value of string>
http-cookie-domain-from-host: <value in [disable, enable]>
http-cookie-generation: <value of integer>
http-cookie-path: <value of string>
http-cookie-share: <value in [disable, same-ip]>
http-ip-header: <value in [disable, enable]>
http-ip-header-name: <value of string>
http-multiplex: <value in [disable, enable]>
https-cookie-secure: <value in [disable, enable]>
id: <value of integer>
ldb-method: <value in [static, round-robin, weighted, ...]>
mapped-addr: <value of string>
mappedip:
- <value of string>
mappedport: <value of string>
max-embryonic-connections: <value of integer>
monitor: <value of string>
name: <value of string>
nat-source-vip: <value in [disable, enable]>
outlook-web-access: <value in [disable, enable]>
persistence: <value in [none, http-cookie, ssl-session-id]>
portforward: <value in [disable, enable]>
portmapping-type: <value in [1-to-1, m-to-n]>
protocol: <value in [tcp, udp, sctp, ...]>
realservers:
-
client-ip:
- <value of string>
healthcheck: <value in [disable, enable, vip]>
holddown-interval: <value of integer>
http-host: <value of string>
ip: <value of string>
max-connections: <value of integer>
monitor: <value of string>
port: <value of integer>
seq: <value of integer>
status: <value in [active, standby, disable]>
weight: <value of integer>
server-type: <value in [http, https, ssl, ...]>
service: <value of string>
src-filter:
- <value of string>
srcintf-filter: <value of string>
ssl-algorithm: <value in [high, medium, low, ...]>
ssl-certificate: <value of string>
ssl-cipher-suites:
-
cipher: <value in [TLS-RSA-WITH-RC4-128-MD5, TLS-RSA-WITH-RC4-128-SHA, TLS-RSA-WITH-DES-CBC-SHA, ...]>
id: <value of integer>
versions:
- <value in [ssl-3.0, tls-1.0, tls-1.1, ...]>
ssl-client-fallback: <value in [disable, enable]>
ssl-client-renegotiation: <value in [deny, allow, secure]>
ssl-client-session-state-max: <value of integer>
ssl-client-session-state-timeout: <value of integer>
ssl-client-session-state-type: <value in [disable, time, count, ...]>
ssl-dh-bits: <value in [768, 1024, 1536, ...]>
ssl-hpkp: <value in [disable, enable, report-only]>
ssl-hpkp-age: <value of integer>
ssl-hpkp-backup: <value of string>
ssl-hpkp-include-subdomains: <value in [disable, enable]>
ssl-hpkp-primary: <value of string>
ssl-hpkp-report-uri: <value of string>
ssl-hsts: <value in [disable, enable]>
ssl-hsts-age: <value of integer>
ssl-hsts-include-subdomains: <value in [disable, enable]>
ssl-http-location-conversion: <value in [disable, enable]>
ssl-http-match-host: <value in [disable, enable]>
ssl-max-version: <value in [ssl-3.0, tls-1.0, tls-1.1, ...]>
ssl-min-version: <value in [ssl-3.0, tls-1.0, tls-1.1, ...]>
ssl-mode: <value in [half, full]>
ssl-pfs: <value in [require, deny, allow]>
ssl-send-empty-frags: <value in [disable, enable]>
ssl-server-algorithm: <value in [high, low, medium, ...]>
ssl-server-cipher-suites:
-
cipher: <value in [TLS-RSA-WITH-RC4-128-MD5, TLS-RSA-WITH-RC4-128-SHA, TLS-RSA-WITH-DES-CBC-SHA, ...]>
priority: <value of integer>
versions:
- <value in [ssl-3.0, tls-1.0, tls-1.1, ...]>
ssl-server-max-version: <value in [ssl-3.0, tls-1.0, tls-1.1, ...]>
ssl-server-min-version: <value in [ssl-3.0, tls-1.0, tls-1.1, ...]>
ssl-server-session-state-max: <value of integer>
ssl-server-session-state-timeout: <value of integer>
ssl-server-session-state-type: <value in [disable, time, count, ...]>
type: <value in [static-nat, load-balance, server-load-balance, ...]>
uuid: <value of string>
weblogic-server: <value in [disable, enable]>
websphere-server: <value in [disable, enable]>
- name: REQUESTING /PM/CONFIG/OBJ/FIREWALL/VIP
fmgr_firewall_vip:
loose_validation: False
workspace_locking_adom: <value in [global, custom adom]>
workspace_locking_timeout: 300
method: <value in [get]>
url_params:
adom: <value in [none, global, custom dom]>
params:
-
attr: <value of string>
fields:
-
- <value in [arp-reply, color, comment, ...]>
filter:
- <value of string>
get used: <value of integer>
loadsub: <value of integer>
option: <value in [count, object member, datasrc, ...]>
range:
- <value of integer>
sortings:
-
varidic.attr_name: <value in [1, -1]>
Возвращаемые значения
Общие возвращаемые значения описаны здесь, следующие являются полями, уникальными для этого модуля:
| Ключ | Возвращаемое значение | Описание |
|---|---|---|
| data словарь | всегда | Загрузка, возвращаемая в запросе |
| status словарь | всегда | Статус запроса API |
| url строка | всегда | Полный запрашиваемый URL Пример: /sys/login/user |
Авторы
- Frank Shen (@fshen01)
- Link Zheng (@zhengl)
© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.10/collections/fortinet/fortimanager/fmgr_firewall_vip_module.html
