ansible.netcommon.netconf_get – Получение данных конфигурации/состояния с сетевых устройств, поддерживающих NETCONF.

• Описание
• Требования
• Параметры
• Примечания
• Примеры
• Возвращаемые значения

Описание

• NETCONF — это протокол управления сетями, разработанный и стандартизированный IETF. Он документирован в RFC 6241.
• Этот модуль позволяет пользователю получать данные конфигурации и состояния с сетевых устройств, поддерживающих NETCONF.

Требования

Ниже приведены требования к хосту, на котором выполняется этот модуль.

• ncclient (>=v0.5.2)
• jxmlease (для display=json)
• xmltodict (для display=native)

Параметры

Примечания

Примеры

- name: Get running configuration and state data
  ansible.netcommon.netconf_get:

- name: Get configuration and state data from startup datastore
  ansible.netcommon.netconf_get:
    source: startup

- name: Get system configuration data from running datastore state (junos)
  ansible.netcommon.netconf_get:
    source: running
    filter: <configuration><system></system></configuration>

- name: Get configuration and state data in JSON format
  ansible.netcommon.netconf_get:
    display: json

- name: get schema list using subtree w/ namespaces
  ansible.netcommon.netconf_get:
    display: json
    filter: <netconf-state xmlns="urn:ietf:params:xml:ns:yang:ietf-netconf-monitoring"><schemas><schema/></schemas></netconf-state>
    lock: never

- name: get schema list using xpath
  ansible.netcommon.netconf_get:
    display: xml
    filter: /netconf-state/schemas/schema

- name: get interface configuration with filter (iosxr)
  ansible.netcommon.netconf_get:
    display: pretty
    filter: <interface-configurations xmlns="http://cisco.com/ns/yang/Cisco-IOS-XR-ifmgr-cfg"></interface-configurations>
    lock: if-supported

- name: Get system configuration data from running datastore state (junos)
  ansible.netcommon.netconf_get:
    source: running
    filter: <configuration><system></system></configuration>
    lock: if-supported

- name: Get complete configuration data from running datastore (SROS)
  ansible.netcommon.netconf_get:
    source: running
    filter: <configure xmlns="urn:nokia.com:sros:ns:yang:sr:conf"/>

- name: Get complete state data (SROS)
  ansible.netcommon.netconf_get:
    filter: <state xmlns="urn:nokia.com:sros:ns:yang:sr:state"/>

- name: "get configuration with json filter string and native output (using xmltodict)"
  netconf_get:
    filter: |
              {
                  "interface-configurations": {
                      "@xmlns": "http://cisco.com/ns/yang/Cisco-IOS-XR-ifmgr-cfg",
                      "interface-configuration": null
                  }
              }
    display: native

- name: Define the Cisco IOSXR interface filter
  set_fact:
    filter:
      interface-configurations:
        "@xmlns": "http://cisco.com/ns/yang/Cisco-IOS-XR-ifmgr-cfg"
        interface-configuration: null

- name: "get configuration with native filter type using set_facts"
  ansible.netcommon.netconf_get:
    filter: "{{ filter }}"
    display: native
  register: result

- name: "get configuration with direct native filter type"
  ansible.netcommon.netconf_get:
    filter: {
            "interface-configurations": {
            "@xmlns": "http://cisco.com/ns/yang/Cisco-IOS-XR-ifmgr-cfg",
            "interface-configuration": null
      }
    }
    display: native
  register: result


# Make a round-trip interface description change, diff the before and after
# this demonstrates the use of the native display format and several utilities
# from the ansible.utils collection

- name: Define the openconfig interface filter
  set_fact:
    filter:
      interfaces:
        "@xmlns": "http://openconfig.net/yang/interfaces"
        interface:
          name: Ethernet2

- name: Get the pre-change config using the filter
  ansible.netcommon.netconf_get:
    source: running
    filter: "{{ filter }}"
    display: native
  register: pre

- name: Update the description
  ansible.utils.update_fact:
    updates:
    - path: pre.output.data.interfaces.interface.config.description
      value: "Configured by ansible {{ 100 | random }}"
  register: updated

- name: Apply the new configuration
  ansible.netcommon.netconf_config:
    content:
      config:
        interfaces: "{{ updated.pre.output.data.interfaces }}"

- name: Get the post-change config using the filter
  ansible.netcommon.netconf_get:
    source: running
    filter: "{{ filter }}"
    display: native
  register: post

- name: Show the differences between the pre and post configurations
  ansible.utils.fact_diff:
    before: "{{ pre.output.data|ansible.utils.to_paths }}"
    after: "{{ post.output.data|ansible.utils.to_paths }}"

# TASK [Show the differences between the pre and post configurations] ********
# --- before
# +++ after
# @@ -1,11 +1,11 @@
#  {
# -    "@time-modified": "2020-10-23T12:27:17.462332477Z",
# +    "@time-modified": "2020-10-23T12:27:21.744541708Z",
#      "@xmlns": "urn:ietf:params:xml:ns:netconf:base:1.0",
#      "interfaces.interface.aggregation.config['fallback-timeout']['#text']": "90",
#      "interfaces.interface.aggregation.config['fallback-timeout']['@xmlns']": "http://arista.com/yang/openconfig/interfaces/augments",
#      "interfaces.interface.aggregation.config['min-links']": "0",
#      "interfaces.interface.aggregation['@xmlns']": "http://openconfig.net/yang/interfaces/aggregate",
# -    "interfaces.interface.config.description": "Configured by ansible 56",
# +    "interfaces.interface.config.description": "Configured by ansible 67",
#      "interfaces.interface.config.enabled": "true",
#      "interfaces.interface.config.mtu": "0",
#      "interfaces.interface.config.name": "Ethernet2",

Возвращаемые значения

Общие возвращаемые значения документированы здесь, следующие поля уникальны для этого модуля:

Авторы

• Ganesh Nalawade (@ganeshrn)
• Sven Wisotzky (@wisotzky)