cisco.ios.ios_ospfv2 – Модуль ресурсов OSPFv2

• Обзор
• Параметры
• Примечания
• Примеры
• Возвращаемые значения

Обзор

• Этот модуль настраивает и управляет протоколом Open Shortest Path First (OSPF) версии 2 на платформах IOS.

Параметры

Примечания

Примеры

# Using deleted

# Before state:
# -------------
#
# router-ios#sh running-config | section ^router ospf
# router ospf 200 vrf blue
#  domain-id 192.0.3.1
#  max-metric router-lsa on-startup 100
#  auto-cost reference-bandwidth 4
#  area 10 capability default-exclusion
#  distribute-list 10 out
#  distribute-list 123 in
# router ospf 1
#  max-metric router-lsa on-startup 110
#  area 10 authentication message-digest
#  area 10 nssa default-information-originate metric 10
#  area 10 nssa translate type7 suppress-fa
#  area 10 default-cost 10
#  area 10 filter-list prefix test_prefix_out out
#  network 198.51.100.0 0.0.0.255 area 5
#  default-information originate

- name: Delete provided OSPF V2 processes
  cisco.ios.ios_ospfv2:
    config:
      processes:
      - process_id: 1
      - process_id: 200
        vrf: blue
    state: deleted

# Commands Fired:
# ---------------
#
# "commands": [
#        "no router ospf 1"
#    ]

# After state:
# -------------
# router-ios#sh running-config | section ^router ospf
# router ospf 200 vrf blue
#  domain-id 192.0.3.1
#  max-metric router-lsa on-startup 100
#  auto-cost reference-bandwidth 4
#  area 10 capability default-exclusion
#  distribute-list 10 out
#  distribute-list 123 in

# Using deleted without any config passed (NOTE: This will delete all OSPFV2 configuration from device)

# Before state:
# -------------
#
# router-ios#sh running-config | section ^router ospf
# router ospf 200 vrf blue
#  domain-id 192.0.3.1
#  max-metric router-lsa on-startup 100
#  auto-cost reference-bandwidth 4
#  area 10 capability default-exclusion
#  distribute-list 10 out
#  distribute-list 123 in
# router ospf 1
#  max-metric router-lsa on-startup 110
#  area 10 authentication message-digest
#  area 10 nssa default-information-originate metric 10
#  area 10 nssa translate type7 suppress-fa
#  area 10 default-cost 10
#  area 10 filter-list prefix test_prefix_out out
#  network 198.51.100.0 0.0.0.255 area 5
#  default-information originate

- name: Delete all OSPF processes
  cisco.ios.ios_ospfv2:
    state: deleted

# Commands Fired:
# ---------------
#
# "commands": [
#        "no router ospf 200 vrf blue",
#        "no router ospf 1"
#    ]

# After state:
# -------------
# router-ios#sh running-config | section ^router ospf
# router-ios#

# Using merged

# Before state:
# -------------
#
# router-ios#sh running-config | section ^router ospf
# router-ios#

- name: Merge provided OSPF V2 configuration
  cisco.ios.ios_ospfv2:
    config:
      processes:
      - process_id: 1
        max_metric:
          router_lsa: true
          on_startup:
            time: 110
        areas:
        - area_id: '5'
          capability: true
          authentication:
            enable: true
        - area_id: '10'
          authentication:
            message_digest: true
          nssa:
            default_information_originate:
              metric: 10
            translate: suppress-fa
          default_cost: 10
          filter_list:
          - name: test_prefix_in
            direction: in
          - name: test_prefix_out
            direction: out
        network:
          address: 198.51.100.0
          wildcard_bits: 0.0.0.255
          area: 5
        default_information:
          originate: true
      - process_id: 200
        vrf: blue
        domain_id:
          ip_address:
            address: 192.0.3.1
        max_metric:
          router_lsa: true
          on_startup:
            time: 100
        auto_cost:
          reference_bandwidth: 4
        areas:
        - area_id: '10'
          capability: true
        distribute_list:
          acls:
          - name: 10
            direction: out
          - name: 123
            direction: in
    state: merged

# Commands Fired:
# ---------------
#
#  "commands": [
#         "router ospf 200 vrf blue",
#         "auto-cost reference-bandwidth 4",
#         "distribute-list 10 out",
#         "distribute-list 123 in",
#         "domain-id 192.0.3.1",
#         "max-metric router-lsa on-startup 100",
#         "area 10 capability default-exclusion",
#         "router ospf 1",
#         "default-information originate",
#         "max-metric router-lsa on-startup 110",
#         "network 198.51.100.0 0.0.0.255 area 5",
#         "area 10 authentication message-digest",
#         "area 10 default-cost 10",
#         "area 10 nssa translate type7 suppress-fa",
#         "area 10 nssa default-information-originate metric 10",
#         "area 10 filter-list prefix test_prefix_out out",
#         "area 10 filter-list prefix test_prefix_in in",
#         "area 5 authentication",
#         "area 5 capability default-exclusion"
#     ]

# After state:
# -------------
#
# router-ios#sh running-config | section ^router ospf
# router ospf 200 vrf blue
#  domain-id 192.0.3.1
#  max-metric router-lsa on-startup 100
#  auto-cost reference-bandwidth 4
#  area 10 capability default-exclusion
#  distribute-list 10 out
#  distribute-list 123 in
# router ospf 1
#  max-metric router-lsa on-startup 110
#  area 10 authentication message-digest
#  area 10 nssa default-information-originate metric 10
#  area 10 nssa translate type7 suppress-fa
#  area 10 default-cost 10
#  area 10 filter-list prefix test_prefix_out out
#  network 198.51.100.0 0.0.0.255 area 5
#  default-information originate

# Using overridden

# Before state:
# -------------
#
# router-ios#sh running-config | section ^router ospf
# router ospf 200 vrf blue
#  domain-id 192.0.3.1
#  max-metric router-lsa on-startup 100
#  auto-cost reference-bandwidth 4
#  area 10 capability default-exclusion
#  distribute-list 10 out
#  distribute-list 123 in
# router ospf 1
#  max-metric router-lsa on-startup 110
#  area 10 authentication message-digest
#  area 10 nssa default-information-originate metric 10
#  area 10 nssa translate type7 suppress-fa
#  area 10 default-cost 10
#  area 10 filter-list prefix test_prefix_out out
#  network 198.51.100.0 0.0.0.255 area 5
#  default-information originate

- name: Override provided OSPF V2 configuration
  cisco.ios.ios_ospfv2:
    config:
      processes:
      - process_id: 200
        vrf: blue
        domain_id:
          ip_address:
            address: 192.0.4.1
        max_metric:
          router_lsa: true
          on_startup:
            time: 200
        maximum_paths: 15
        ttl_security:
          hops: 7
        areas:
        - area_id: '10'
          default_cost: 10
          authentication:
            message_digest: true
      - process_id: 100
        vrf: ospf_vrf
        domain_id:
          ip_address:
            address: 192.0.5.1
        auto_cost:
          reference_bandwidth: 5
        areas:
        - area_id: '5'
          authentication:
            message_digest: true
          nssa:
            default_information_originate:
              metric: 10
            translate: suppress-fa
    state: overridden

# Commands Fired:
# ---------------
#
# "commands": [
#         "no router ospf 1",
#         "router ospf 100 vrf ospf_vrf",
#         "auto-cost reference-bandwidth 5",
#         "domain-id 192.0.5.1",
#         "area 5 authentication message-digest",
#         "area 5 nssa translate type7 suppress-fa",
#         "area 5 nssa default-information-originate metric 10",
#         "router ospf 200 vrf blue",
#         "no auto-cost reference-bandwidth 4",
#         "no distribute-list 10 out",
#         "no distribute-list 123 in",
#         "domain-id 192.0.4.1",
#         "max-metric router-lsa on-startup 200",
#         "maximum-paths 15",
#         "ttl-security all-interfaces hops 7",
#         "area 10 authentication message-digest",
#         "no area 10 capability default-exclusion",
#         "area 10 default-cost 10"
#     ]

# After state:
# -------------
#
# router-ios#sh running-config | section ^router ospf
# router ospf 200 vrf blue
#  domain-id 192.0.4.1
#  max-metric router-lsa on-startup 200
#  ttl-security all-interfaces hops 7
#  area 10 authentication message-digest
#  area 10 default-cost 10
#  maximum-paths 15
# router ospf 100 vrf ospf_vrf
#  domain-id 192.0.5.1
#  auto-cost reference-bandwidth 5
#  area 5 authentication message-digest
#  area 5 nssa default-information-originate metric 10
#  area 5 nssa translate type7 suppress-fa

# Using replaced

# Before state:
# -------------
#
# router-ios#sh running-config | section ^router ospf
# router ospf 200 vrf blue
#  domain-id 192.0.3.1
#  max-metric router-lsa on-startup 100
#  auto-cost reference-bandwidth 4
#  area 10 capability default-exclusion
#  distribute-list 10 out
#  distribute-list 123 in
# router ospf 1
#  max-metric router-lsa on-startup 110
#  area 10 authentication message-digest
#  area 10 nssa default-information-originate metric 10
#  area 10 nssa translate type7 suppress-fa
#  area 10 default-cost 10
#  area 10 filter-list prefix test_prefix_out out
#  network 198.51.100.0 0.0.0.255 area 5
#  default-information originate

- name: Replaced provided OSPF V2 configuration
  cisco.ios.ios_ospfv2:
    config:
      processes:
      - process_id: 200
        vrf: blue
        domain_id:
          ip_address:
            address: 192.0.4.1
        max_metric:
          router_lsa: true
          on_startup:
            time: 200
        maximum_paths: 15
        ttl_security:
          hops: 7
        areas:
        - area_id: '10'
          default_cost: 10
          authentication:
            message_digest: true
      - process_id: 100
        vrf: ospf_vrf
        domain_id:
          ip_address:
            address: 192.0.5.1
        auto_cost:
          reference_bandwidth: 5
        areas:
        - area_id: '5'
          authentication:
            message_digest: true
          nssa:
            default_information_originate:
              metric: 10
            translate: suppress-fa
    state: replaced

# Commands Fired:
# ---------------
# "commands": [
#         "router ospf 100 vrf ospf_vrf",
#         "auto-cost reference-bandwidth 5",
#         "domain-id 192.0.5.1",
#         "area 5 authentication message-digest",
#         "area 5 nssa translate type7 suppress-fa",
#         "area 5 nssa default-information-originate metric 10",
#         "router ospf 200 vrf blue",
#         "no auto-cost reference-bandwidth 4",
#         "no distribute-list 10 out",
#         "no distribute-list 123 in",
#         "domain-id 192.0.4.1",
#         "max-metric router-lsa on-startup 200",
#         "maximum-paths 15",
#         "ttl-security all-interfaces hops 7",
#         "area 10 authentication message-digest",
#         "no area 10 capability default-exclusion",
#         "area 10 default-cost 10"
#     ]

# After state:
# -------------
# router-ios#sh running-config | section ^router ospf
# router ospf 200 vrf blue
#  domain-id 192.0.4.1
#  max-metric router-lsa on-startup 200
#  ttl-security all-interfaces hops 7
#  area 10 authentication message-digest
#  area 10 default-cost 10
#  maximum-paths 15
# router ospf 100 vrf ospf_vrf
#  domain-id 192.0.5.1
#  auto-cost reference-bandwidth 5
#  area 5 authentication message-digest
#  area 5 nssa default-information-originate metric 10
#  area 5 nssa translate type7 suppress-fa
# router ospf 1
#  max-metric router-lsa on-startup 110
#  area 5 capability default-exclusion
#  area 5 authentication
#  area 10 authentication message-digest
#  area 10 nssa default-information-originate metric 10
#  area 10 nssa translate type7 suppress-fa
#  area 10 default-cost 10
#  area 10 filter-list prefix test_prefix_in in
#  area 10 filter-list prefix test_prefix_out out
#  network 198.51.100.0 0.0.0.255 area 5
#  default-information originate

# Using Gathered

# Before state:
# -------------
#
# router-ios#sh running-config | section ^router ospf
# router ospf 200 vrf blue
#  domain-id 192.0.3.1
#  max-metric router-lsa on-startup 100
#  auto-cost reference-bandwidth 4
#  area 10 capability default-exclusion
#  distribute-list 10 out
#  distribute-list 123 in
# router ospf 1
#  max-metric router-lsa on-startup 110
#  area 10 authentication message-digest
#  area 10 nssa default-information-originate metric 10
#  area 10 nssa translate type7 suppress-fa
#  area 10 default-cost 10
#  area 10 filter-list prefix test_prefix_out out
#  network 198.51.100.0 0.0.0.255 area 5
#  default-information originate

- name: Gather OSPFV2 provided configurations
  cisco.ios.ios_ospfv2:
    config:
    state: gathered

# Module Execution Result:
# ------------------------
#
# "gathered": {
#         "processes": [
#             {
#                 "areas": [
#                     {
#                         "area_id": "5",
#                         "authentication": {
#                             "enable": true
#                         },
#                         "capability": true
#                     },
#                     {
#                         "area_id": "10",
#                         "authentication": {
#                             "message_digest": true
#                         },
#                         "default_cost": 10,
#                         "filter_list": [
#                             {
#                                 "direction": "in",
#                                 "name": "test_prefix_in"
#                             },
#                             {
#                                 "direction": "out",
#                                 "name": "test_prefix_out"
#                             }
#                         ],
#                         "nssa": {
#                             "default_information_originate": {
#                                 "metric": 10
#                             },
#                             "translate": "suppress-fa"
#                         }
#                     }
#                 ],
#                 "default_information": {
#                     "originate": true
#                 },
#                 "max_metric": {
#                     "on_startup": {
#                         "time": 110
#                     },
#                     "router_lsa": true
#                 },
#                 "network": {
#                     "address": "198.51.100.0",
#                     "area": "5",
#                     "wildcard_bits": "0.0.0.255"
#                 },
#                 "process_id": 1
#             },
#             {
#                 "areas": [
#                     {
#                         "area_id": "10",
#                         "capability": true
#                     }
#                 ],
#                 "auto_cost": {
#                     "reference_bandwidth": 4
#                 },
#                 "distribute_list": {
#                     "acls": [
#                         {
#                             "direction": "out",
#                             "name": "10"
#                         },
#                         {
#                             "direction": "in",
#                             "name": "123"
#                         }
#                     ]
#                 },
#                 "domain_id": {
#                     "ip_address": {
#                         "address": "192.0.3.1"
#                     }
#                 },
#                 "max_metric": {
#                     "on_startup": {
#                         "time": 100
#                     },
#                     "router_lsa": true
#                 },
#                 "process_id": 200,
#                 "vrf": "blue"
#             }
#         ]
#      }

# After state:
# ------------
#
# router-ios#sh running-config | section ^router ospf
# router ospf 200 vrf blue
#  domain-id 192.0.3.1
#  max-metric router-lsa on-startup 100
#  auto-cost reference-bandwidth 4
#  area 10 capability default-exclusion
#  distribute-list 10 out
#  distribute-list 123 in
# router ospf 1
#  max-metric router-lsa on-startup 110
#  area 10 authentication message-digest
#  area 10 nssa default-information-originate metric 10
#  area 10 nssa translate type7 suppress-fa
#  area 10 default-cost 10
#  area 10 filter-list prefix test_prefix_out out
#  network 198.51.100.0 0.0.0.255 area 5
#  default-information originate

# Using Rendered

- name: Render the commands for provided  configuration
  cisco.ios.ios_ospfv2:
    config:
      processes:
      - process_id: 1
        max_metric:
          router_lsa: true
          on_startup:
            time: 110
        areas:
        - area_id: '5'
          capability: true
          authentication:
            enable: true
        - area_id: '10'
          authentication:
            message_digest: true
          nssa:
            default_information_originate:
              metric: 10
            translate: suppress-fa
          default_cost: 10
          filter_list:
          - name: test_prefix_in
            direction: in
          - name: test_prefix_out
            direction: out
        network:
          address: 198.51.100.0
          wildcard_bits: 0.0.0.255
          area: 5
        default_information:
          originate: true
      - process_id: 200
        vrf: blue
        domain_id:
          ip_address:
            address: 192.0.3.1
        max_metric:
          router_lsa: true
          on_startup:
            time: 100
        auto_cost:
          reference_bandwidth: 4
        areas:
        - area_id: '10'
          capability: true
        distribute_list:
          acls:
          - name: 10
            direction: out
          - name: 123
            direction: in
    state: rendered

# Module Execution Result:
# ------------------------
#
# "rendered": [
#         "router ospf 200 vrf blue",
#         "auto-cost reference-bandwidth 4",
#         "distribute-list 10 out",
#         "distribute-list 123 in",
#         "domain-id 192.0.3.1",
#         "max-metric router-lsa on-startup 100",
#         "area 10 capability default-exclusion",
#         "router ospf 1",
#         "default-information originate",
#         "max-metric router-lsa on-startup 110",
#         "network 198.51.100.0 0.0.0.255 area 5",
#         "area 10 authentication message-digest",
#         "area 10 default-cost 10",
#         "area 10 nssa translate type7 suppress-fa",
#         "area 10 nssa default-information-originate metric 10",
#         "area 10 filter-list prefix test_prefix_out out",
#         "area 10 filter-list prefix test_prefix_in in",
#         "area 5 authentication",
#         "area 5 capability default-exclusion"
#     ]

# Using Parsed

# File: parsed.cfg
# ----------------
#
# router ospf 100
#  auto-cost reference-bandwidth 5
#  domain-id 192.0.5.1
#  area 5 authentication message-digest
#  area 5 nssa translate type7 suppress-fa
#  area 5 nssa default-information-originate metric 10

- name: Parse the provided configuration with the exisiting running configuration
  cisco.ios.ios_ospfv2:
    running_config: "{{ lookup('file', 'parsed.cfg') }}"
    state: parsed

# Module Execution Result:
# ------------------------
#
# "parsed": {
#         "processes": [
#             {
#                 "areas": [
#                     {
#                         "area_id": "5",
#                         "authentication": {
#                             "message_digest": true
#                         },
#                         "nssa": {
#                             "default_information_originate": {
#                                 "metric": 10
#                             },
#                             "translate": "suppress-fa"
#                         }
#                     }
#                 ],
#                 "auto_cost": {
#                     "reference_bandwidth": 5
#                 },
#                 "domain_id": {
#                     "ip_address": {
#                         "address": "192.0.5.1"
#                     }
#                 },
#                 "process_id": 100
#             }
#         ]
#     }

Возвращаемые значения

Общие возвращаемые значения описаны здесь, следующие поля уникальны для этого модуля:

Авторы

• Sumit Jaiswal (@justjais)