cisco.ios.ios_ospfv3 – Модуль ресурсов OSPFv3

• Описание
• Параметры
• Примечания
• Примеры
• Возвращаемые значения

Описание

• Этот модуль настраивает и управляет протоколом Open Shortest Path First (OSPF) версии 3 на платформах IOS.

Параметры

Примечания

Примеры

# Using deleted

# Before state:
# -------------
#
# router-ios#sh running-config | section ^router ospfv3
# router ospfv3 1
#  max-metric router-lsa on-startup 110
#  area 10 nssa default-information-originate metric 10
#  !
#  address-family ipv4 unicast vrf blue
#   adjacency stagger 50 50
#   area 25 nssa default-information-originate metric 25 nssa-only
#  exit-address-family
# router ospfv3 200
#  max-metric router-lsa on-startup 100
#  auto-cost reference-bandwidth 4
#  !
#  address-family ipv4 unicast
#   adjacency stagger 200 200
#  exit-address-family

- name: Delete provided OSPF V3 processes
  cisco.ios.ios_ospfv3:
    config:
      processes:
      - process_id: 1
    state: deleted

# Commands Fired:
# ---------------
#
# "commands": [
#        "no router ospfv3 1"
#    ]

# After state:
# -------------
# router-ios#sh running-config | section ^router ospfv3
# router ospfv3 200
#  max-metric router-lsa on-startup 100
#  auto-cost reference-bandwidth 4
#  !
#  address-family ipv4 unicast
#   adjacency stagger 200 200
#  exit-address-family

# Using deleted without any config passed (NOTE: This will delete all OSPFV3 configuration from device)

# Before state:
# -------------
#
# router-ios#sh running-config | section ^router ospfv3
# router ospfv3 1
#  max-metric router-lsa on-startup 110
#  area 10 nssa default-information-originate metric 10
#  !
#  address-family ipv4 unicast vrf blue
#   adjacency stagger 50 50
#   area 25 nssa default-information-originate metric 25 nssa-only
#  exit-address-family
# router ospfv3 200
#  max-metric router-lsa on-startup 100
#  auto-cost reference-bandwidth 4
#  !
#  address-family ipv4 unicast
#   adjacency stagger 200 200
#  exit-address-family

- name: Delete all OSPF processes
  cisco.ios.ios_ospfv3:
    state: deleted

# Commands Fired:
# ---------------
#
# "commands": [
#        "no router ospfv3 200",
#        "no router ospfv3 1"
#    ]

# After state:
# -------------
# router-ios#sh running-config | section ^router ospfv3
# router-ios#

# Using merged

# Before state:
# -------------
#
# router-ios#sh running-config | section ^router ospfv3
# router-ios#

- name: Merge provided OSPFV3 configuration
  cisco.ios.ios_ospfv3:
    config:
      processes:
      - process_id: 1
        max_metric:
          router_lsa: true
          on_startup:
            time: 110
        address_family:
          - afi: ipv4
            unicast: true
            vrf: blue
            adjacency:
              min_adjacency: 50
              max_adjacency: 50
            areas:
              - area_id: 25
                nssa:
                  default_information_originate:
                    metric: 25
                    nssa_only: true
        areas:
          - area_id: "10"
            nssa:
              default_information_originate:
                metric: 10
        timers:
          throttle:
            lsa:
              first_delay: 12
              min_delay: 14
              max_delay: 16
      - process_id: 200
        address_family:
          - afi: ipv4
            unicast: true
            adjacency:
              min_adjacency: 200
              max_adjacency: 200
        max_metric:
          router_lsa: true
          on_startup:
            time: 100
        auto_cost:
          reference_bandwidth: 4
    state: merged

# Commands Fired:
# ---------------
#
#  "commands": [
#         "router ospfv3 1",
#         "max-metric router-lsa on-startup 110",
#         "area 10 nssa default-information-originate metric 10",
#         "address-family ipv4 unicast vrf blue",
#         "adjacency stagger 50 50",
#         "area 25 nssa default-information-originate metric 25 nssa-only",
#         "exit-address-family",
#         "router ospfv3 200",
#         "auto-cost reference-bandwidth 4",
#         "max-metric router-lsa on-startup 100",
#         "address-family ipv4 unicast",
#         "adjacency stagger 200 200",
#         "exit-address-family"
#     ]

# After state:
# -------------
#
# router-ios#sh running-config | section ^router ospfv3
# router ospfv3 1
#  max-metric router-lsa on-startup 110
#  area 10 nssa default-information-originate metric 10
#  !
#  address-family ipv4 unicast vrf blue
#   adjacency stagger 50 50
#   area 25 nssa default-information-originate metric 25 nssa-only
#  exit-address-family
# router ospfv3 200
#  max-metric router-lsa on-startup 100
#  auto-cost reference-bandwidth 4
#  !
#  address-family ipv4 unicast
#   adjacency stagger 200 200
#  exit-address-family

# Using overridden

# Before state:
# -------------
#
# router ospfv3 1
#  max-metric router-lsa on-startup 110
#  area 10 nssa default-information-originate metric 10
#  !
#  address-family ipv4 unicast vrf blue
#   adjacency stagger 50 50
#   area 25 nssa default-information-originate metric 25 nssa-only
#  exit-address-family
# router ospfv3 200
#  max-metric router-lsa on-startup 100
#  auto-cost reference-bandwidth 4
#  !
#  address-family ipv4 unicast
#   adjacency stagger 200 200
#  exit-address-family

- name: Override provided OSPFV3 configuration
  cisco.ios.ios_ospfv3:
    config:
      processes:
        - process_id: 200
          max_metric:
            router_lsa: true
            on_startup:
              time: 200
          address_family:
            - afi: ipv4
              unicast: true
              adjacency:
                min_adjacency: 50
                max_adjacency: 50
              areas:
                - area_id: 200
                  nssa:
                    default_information_originate:
                      metric: 200
                      nssa_only: true
          areas:
            - area_id: "10"
              nssa:
                default_information_originate:
                  metric: 10
    state: overridden

# Commands Fired:
# ---------------
#
# "commands": [
#         "no router ospfv3 1",
#         "router ospfv3 200",
#         "no auto-cost reference-bandwidth 4",
#         "max-metric router-lsa on-startup 200",
#         "area 10 nssa default-information-originate metric 10",
#         "address-family ipv4 unicast",
#         "adjacency stagger 50 50",
#         "area 200 nssa default-information-originate metric 200 nssa-only",
#         "exit-address-family"
#     ]

# After state:
# -------------
#
# router-ios#sh running-config | section ^router ospfv3
# router ospfv3 200
#  max-metric router-lsa on-startup 200
#  area 10 nssa default-information-originate metric 10
#  !
#  address-family ipv4 unicast
#   adjacency stagger 50 50
#   area 200 nssa default-information-originate metric 200 nssa-only
#  exit-address-family

# Using replaced

# Before state:
# -------------
#
# router-ios#sh running-config | section ^router ospfv3
# router ospfv3 1
#  max-metric router-lsa on-startup 110
#  area 10 nssa default-information-originate metric 10
#  !
#  address-family ipv4 unicast vrf blue
#   adjacency stagger 50 50
#   area 25 nssa default-information-originate metric 25 nssa-only
#  exit-address-family
# router ospfv3 200
#  max-metric router-lsa on-startup 100
#  auto-cost reference-bandwidth 4
#  !
#  address-family ipv4 unicast
#   adjacency stagger 200 200
#  exit-address-family

- name: Replaced provided OSPFV3 configuration
  cisco.ios.ios_ospfv3:
    config:
      processes:
        - process_id: 200
          max_metric:
            router_lsa: true
            on_startup:
              time: 200
          address_family:
            - afi: ipv4
              unicast: true
              adjacency:
                min_adjacency: 50
                max_adjacency: 50
              areas:
                - area_id: 200
                  nssa:
                    default_information_originate:
                      metric: 200
                      nssa_only: true
          areas:
            - area_id: "10"
              nssa:
                default_information_originate:
                  metric: 10
    state: replaced

# Commands Fired:
# ---------------
# "commands": [
#         "router ospfv3 200",
#         "no auto-cost reference-bandwidth 4",
#         "max-metric router-lsa on-startup 200",
#         "area 10 nssa default-information-originate metric 10",
#         "address-family ipv4 unicast",
#         "adjacency stagger 50 50",
#         "area 200 nssa default-information-originate metric 200 nssa-only",
#         "exit-address-family"
#     ]

# After state:
# -------------
# router-ios#sh running-config | section ^router ospfv3
# router ospfv3 1
#  max-metric router-lsa on-startup 110
#  area 10 nssa default-information-originate metric 10
#  !
#  address-family ipv4 unicast vrf blue
#   adjacency stagger 50 50
#   area 25 nssa default-information-originate metric 25 nssa-only
#  exit-address-family
# router ospfv3 200
#  max-metric router-lsa on-startup 200
#  area 10 nssa default-information-originate metric 10
#  !
#  address-family ipv4 unicast
#   adjacency stagger 50 50
#   area 200 nssa default-information-originate metric 200 nssa-only
#  exit-address-family

# Using Gathered

# Before state:
# -------------
#
# router-ios#sh running-config | section ^router ospfv3
# router ospfv3 1
#  max-metric router-lsa on-startup 110
#  area 10 nssa default-information-originate metric 10
#  !
#  address-family ipv4 unicast vrf blue
#   adjacency stagger 50 50
#   area 25 nssa default-information-originate metric 25 nssa-only
#  exit-address-family
# router ospfv3 200
#  max-metric router-lsa on-startup 100
#  auto-cost reference-bandwidth 4
#  !
#  address-family ipv4 unicast
#   adjacency stagger 200 200
#  exit-address-family

- name: Gather OSPFV3 provided configurations
  cisco.ios.ios_ospfv3:
    config:
    state: gathered

# Module Execution Result:
# ------------------------
#
# "gathered": {
#         "processes": [
#             {
#                 "address_family": [
#                     {
#                         "adjacency": {
#                             "max_adjacency": 50,
#                             "min_adjacency": 50
#                         },
#                         "afi": "ipv4",
#                         "areas": [
#                             {
#                                 "area_id": "25",
#                                 "nssa": {
#                                     "default_information_originate": {
#                                         "metric": 25,
#                                         "nssa_only": true
#                                     }
#                                 }
#                             }
#                         ],
#                         "unicast": true,
#                         "vrf": "blue"
#                     }
#                 ],
#                 "areas": [
#                     {
#                         "area_id": "10",
#                         "nssa": {
#                             "default_information_originate": {
#                                 "metric": 10
#                             }
#                         }
#                     }
#                 ],
#                 "max_metric": {
#                     "on_startup": {
#                         "time": 110
#                     },
#                     "router_lsa": true
#                 },
#                 "process_id": 1
#             },
#             {
#                 "address_family": [
#                     {
#                         "adjacency": {
#                             "max_adjacency": 200,
#                             "min_adjacency": 200
#                         },
#                         "afi": "ipv4",
#                         "unicast": true
#                     }
#                 ],
#                 "auto_cost": {
#                     "reference_bandwidth": 4
#                 },
#                 "max_metric": {
#                     "on_startup": {
#                         "time": 100
#                     },
#                     "router_lsa": true
#                 },
#                 "process_id": 200
#             }
#         ]
#     }

# After state:
# ------------
#
# router-ios#sh running-config | section ^router ospfv3
# router ospfv3 1
#  max-metric router-lsa on-startup 110
#  area 10 nssa default-information-originate metric 10
#  !
#  address-family ipv4 unicast vrf blue
#   adjacency stagger 50 50
#   area 25 nssa default-information-originate metric 25 nssa-only
#  exit-address-family
# router ospfv3 200
#  max-metric router-lsa on-startup 100
#  auto-cost reference-bandwidth 4
#  !
#  address-family ipv4 unicast
#   adjacency stagger 200 200
#  exit-address-family

# Using Rendered

- name: Render the commands for provided  configuration
  cisco.ios.ios_ospfv3:
    config:
      processes:
      - process_id: 1
        max_metric:
          router_lsa: true
          on_startup:
            time: 110
        address_family:
          - afi: ipv4
            unicast: true
            vrf: blue
            adjacency:
              min_adjacency: 50
              max_adjacency: 50
            areas:
              - area_id: 25
                nssa:
                  default_information_originate:
                    metric: 25
                    nssa_only: true
        areas:
          - area_id: "10"
            nssa:
              default_information_originate:
                metric: 10
        timers:
          throttle:
            lsa:
              first_delay: 12
              min_delay: 14
              max_delay: 16
      - process_id: 200
        address_family:
          - afi: ipv4
            unicast: true
            adjacency:
              min_adjacency: 200
              max_adjacency: 200
        max_metric:
          router_lsa: true
          on_startup:
            time: 100
        auto_cost:
          reference_bandwidth: 4
    state: rendered

# Module Execution Result:
# ------------------------
#
# "rendered": [
#         "router ospfv3 1",
#         "max-metric router-lsa on-startup 110",
#         "area 10 nssa default-information-originate metric 10",
#         "address-family ipv4 unicast vrf blue",
#         "adjacency stagger 50 50",
#         "area 25 nssa default-information-originate metric 25 nssa-only",
#         "exit-address-family",
#         "router ospfv3 200",
#         "auto-cost reference-bandwidth 4",
#         "max-metric router-lsa on-startup 100",
#         "address-family ipv4 unicast",
#         "adjacency stagger 200 200",
#         "exit-address-family"
#     ]

# Using Parsed

# File: parsed.cfg
# ----------------
#
# router ospfv3 1
#  max-metric router-lsa on-startup 110
#  area 10 nssa default-information-originate metric 10
#  !
#  address-family ipv4 unicast vrf blue
#   adjacency stagger 50 50
#   area 25 nssa default-information-originate metric 25 nssa-only
#  exit-address-family
# router ospfv3 200
#  max-metric router-lsa on-startup 100
#  auto-cost reference-bandwidth 4
#  !
#  address-family ipv4 unicast
#   adjacency stagger 200 200
#  exit-address-family

- name: Parse the provided configuration with the exisiting running configuration
  cisco.ios.ios_ospfv3:
    running_config: "{{ lookup('file', 'parsed.cfg') }}"
    state: parsed

# Module Execution Result:
# ------------------------
#
# "parsed": {
#         "processes": [
#             {
#                 "address_family": [
#                     {
#                         "adjacency": {
#                             "max_adjacency": 50,
#                             "min_adjacency": 50
#                         },
#                         "afi": "ipv4",
#                         "areas": [
#                             {
#                                 "area_id": "25",
#                                 "nssa": {
#                                     "default_information_originate": {
#                                         "metric": 25,
#                                         "nssa_only": true
#                                     }
#                                 }
#                             }
#                         ],
#                         "unicast": true,
#                         "vrf": "blue"
#                     }
#                 ],
#                 "areas": [
#                     {
#                         "area_id": "10",
#                         "nssa": {
#                             "default_information_originate": {
#                                 "metric": 10
#                             }
#                         }
#                     }
#                 ],
#                 "max_metric": {
#                     "on_startup": {
#                         "time": 110
#                     },
#                     "router_lsa": true
#                 },
#                 "process_id": 1
#             }
#         ]
#     }

Значения возврата

Общие значения возврата документированы здесь, следующие являются полями, уникальными для данного модуля:

Авторы

• Sumit Jaiswal (@justjais)