cisco.iosxr.iosxr_ospf_interfaces – Модуль ресурсов OSPF интерфейсов.

• Описание
• Параметры
• Примечания
• Примеры

Описание

• Этот модуль управляет конфигурацией OSPF(v2/v3) интерфейсов на устройствах с Cisco IOS-XR.

Параметры

Примечания

Примеры

# Using merged

# Before state:
# -------------
#
# RP/0/RP0/CPU0:anton#show running-config router ospf
# % No such configuration item(s)
#

- name: Merge provided OSPF interfaces configuration with the existing configuration
  cisco.iosxr.iosxr_ospf_interfaces:
    config:
      - name: GigabitEthernet0/0/0/0
        type: gigabitethernet
        address_family:
          - afi: ipv4
            processes:
              - process_id: "LAB3"
                area:
                  area_id: 0.0.0.3
            cost: 20
            authentication:
              message_digest:
                keychain: cisco
          - afi: ipv6
            processes:
              - process_id: "LAB3"
                area:
                  area_id: 0.0.0.2
            cost: 30
    state: merged

#
#
# ------------------------
# Module Execution Result
# ------------------------
#
#  "before": []
#
#  "commands": [
#        "router ospf LAB3 area 0.0.0.3 interface GigabitEthernet 0/0/0/0 cost 20",
#        "router ospf LAB3 area 0.0.0.3 interface GigabitEthernet 0/0/0/0 authentication message-digest",
#        "router ospf LAB3 area 0.0.0.3 interface GigabitEthernet 0/0/0/0 authentication message-digest keychain cisco",
#        "router ospfv3 LAB3 area 0.0.0.2 interface GigabitEthernet 0/0/0/0 cost 30"
#     ]
#
#  "after": [
#         {
#             "address_family": [
#                 {
#                     "afi": "ipv4",
#                     "authentication": {
#                         "message_digest": {
#                             "keychain": "cisco"
#                         }
#                     },
#                     "cost": 20,
#                     "processes": [
#                         {
#                             "area": {
#                                 "area_id": "0.0.0.3"
#                             },
#                             "process_id": "LAB3"
#                         }
#                     ]
#                 },
#                 {
#                     "afi": "ipv6",
#                     "cost": 30,
#                     "processes": [
#                         {
#                             "area": {
#                                 "area_id": "0.0.0.2"
#                             },
#                             "process_id": "LAB3"
#                         }
#                     ]
#                 }
#             ],
#             "name": "GigabitEthernet0/0/0/0",
#             "type": "gigabitethernet"
#         }
#     ]
#
#
# ------------
# After state
# ------------
#
# RP/0/0/CPU0:an-iosxr-02#show running-config router ospf
# Thu Oct 23 06:00:57.217 UTC
# router ospf LAB
#  area 0.0.0.0
#  !
#  area 0.0.0.9
#  !
# !
# router ospf LAB1
#  area 0.0.0.1
#  !
#  area 0.0.0.3
#  !
# !
# router ospf LAB3
#  area 0.0.0.3
#   interface GigabitEthernet0/0/0/0
#    cost 20
#    authentication message-digest keychain cisco
#   !
#  !
# !
# router ospf ipv4
# !

# Using replaced
#
# ------------
# Before state
# ------------
#
#
# RP/0/0/CPU0:an-iosxr-02#show running-config router ospf
# Thu Oct 23 06:00:57.217 UTC
# router ospf LAB
#  area 0.0.0.0
#  !
#  area 0.0.0.9
#  !
# !
# router ospf LAB1
#  area 0.0.0.1
#  !
#  area 0.0.0.3
#  !
# !
# router ospf LAB3
#  area 0.0.0.3
#   interface GigabitEthernet0/0/0/0
#    cost 20
#    authentication message-digest keychain cisco
#   !
#  !
# !
# router ospf ipv4
# !

- name: Replace OSPF interfaces configuration
  cisco.iosxr.iosxr_ospf_interfaces:
    config:
      - name: GigabitEthernet0/0/0/0
        type: gigabitethernet
        address_family:
          - afi: ipv4
            processes:
              - process_id: "LAB3"
                area:
                  area_id: 0.0.0.3
            cost: 30
            authentication:
              message_digest:
                keychain: ciscoiosxr
          - afi: ipv6
            processes:
              - process_id: "LAB3"
                area:
                  area_id: 0.0.0.2
            cost: 30
    state: replaced

#
#
# ------------------------
# Module Execution Result
# ------------------------
#
#  "before": [
#         {
#             "address_family": [
#                 {
#                     "afi": "ipv4",
#                     "authentication": {
#                         "message_digest": {
#                             "keychain": "cisco"
#                         }
#                     },
#                     "cost": 20,
#                     "processes": [
#                         {
#                             "area": {
#                                 "area_id": "0.0.0.3"
#                             },
#                             "process_id": "LAB3"
#                         }
#                     ]
#                 },
#                 {
#                     "afi": "ipv6",
#                     "cost": 30,
#                     "processes": [
#                         {
#                             "area": {
#                                 "area_id": "0.0.0.2"
#                             },
#                             "process_id": "LAB3"
#                         }
#                     ]
#                 }
#             ],
#             "name": "GigabitEthernet0/0/0/0",
#             "type": "gigabitethernet"
#         }
#     ]
#
#  "commands": [
#    "router ospf LAB3 area 0.0.0.3 interface GigabitEthernet 0/0/0/0 cost 30",
#    "router ospf LAB3 area 0.0.0.3 interface GigabitEthernet 0/0/0/0 authentication message-digest",
#    "router ospf LAB3 area 0.0.0.3 interface GigabitEthernet 0/0/0/0 authentication message-digest keychain ciscoiosxr"
#     ]
#
#  "after": [
#         {
#             "address_family": [
#                 {
#                     "afi": "ipv4",
#                     "authentication": {
#                         "message_digest": {
#                             "keychain": "ciscoiosxr"
#                         }
#                     },
#                     "cost": 30,
#                     "processes": [
#                         {
#                             "area": {
#                                 "area_id": "0.0.0.3"
#                             },
#                             "process_id": "LAB3"
#                         }
#                     ]
#                 },
#                 {
#                     "afi": "ipv6",
#                     "cost": 30,
#                     "processes": [
#                         {
#                             "area": {
#                                 "area_id": "0.0.0.2"
#                             },
#                             "process_id": "LAB3"
#                         }
#                     ]
#                 }
#             ],
#             "name": "GigabitEthernet0/0/0/0",
#             "type": "gigabitethernet"
#         }
#     ]
#
#
# -----------
# After state
# -----------
#
# RP/0/0/CPU0:an-iosxr-02#show running-config router ospf
# Thu Oct 23 06:10:39.827 UTC
# router ospf LAB
#  area 0.0.0.0
#  !
#  area 0.0.0.9
#  !
# !
# router ospf LAB1
#  area 0.0.0.1
#  !
#  area 0.0.0.3
#  !
# !
# router ospf LAB3
#  area 0.0.0.3
#   interface GigabitEthernet0/0/0/0
#    cost 30
#    authentication message-digest keychain ciscoiosxr
#   !
#  !
# !
# router ospf ipv4
# !

- name: Override existing OSPF interfaces configuration
  cisco.iosxr.iosxr_ospf_interfaces:
    config:
      - name: GigabitEthernet0/0/0/1
        type: gigabitethernet
        address_family:
          - afi: ipv4
            processes:
              - process_id: "LAB1"
                area:
                  area_id: 0.0.0.3
            cost: 10
            authentication:
              message_digest:
                keychain: iosxr
    state: overridden

#
#
# ------------------------
# Module Execution Result
# ------------------------
#
#  "before": [
#         {
#             "address_family": [
#                 {
#                     "afi": "ipv4",
#                     "authentication": {
#                         "message_digest": {
#                             "keychain": "ciscoiosxr"
#                         }
#                     },
#                     "cost": 30,
#                     "processes": [
#                         {
#                             "area": {
#                                 "area_id": "0.0.0.3"
#                             },
#                             "process_id": "LAB3"
#                         }
#                     ]
#                 },
#                 {
#                     "afi": "ipv6",
#                     "cost": 30,
#                     "processes": [
#                         {
#                             "area": {
#                                 "area_id": "0.0.0.2"
#                             },
#                             "process_id": "LAB3"
#                         }
#                     ]
#                 }
#             ],
#             "name": "GigabitEthernet0/0/0/0",
#             "type": "gigabitethernet"
#         }
#     ]
#
#  "commands": [
#         "no router ospf LAB3 area 0.0.0.3 interface GigabitEthernet 0/0/0/0",
#         "no router ospfv3 LAB3 area 0.0.0.2 interface GigabitEthernet 0/0/0/0",
#         "router ospf LAB1 area 0.0.0.3 interface GigabitEthernet 0/0/0/1 cost 10",
#         "router ospf LAB1 area 0.0.0.3 interface GigabitEthernet 0/0/0/1 authentication message-digest",
#         "router ospf LAB1 area 0.0.0.3 interface GigabitEthernet 0/0/0/1 authentication message-digest keychain iosxr"
#     ]
#
#  "after": [
#         {
#             "address_family": [
#                 {
#                     "afi": "ipv4",
#                     "authentication": {
#                         "message_digest": {
#                             "keychain": "iosxr"
#                         }
#                     },
#                     "cost": 10,
#                     "processes": [
#                         {
#                             "area": {
#                                 "area_id": "0.0.0.3"
#                             },
#                             "process_id": "LAB1"
#                         }
#                     ]
#                 }
#             ],
#             "name": "GigabitEthernet0/0/0/1",
#             "type": "gigabitethernet"
#         }
#     ]
#
#
# -----------
# After state
# -----------
#
# RP/0/0/CPU0:an-iosxr-02#show running-config router ospf
# Thu Oct 23 06:28:15.025 UTC
# router ospf LAB
#  area 0.0.0.0
#  !
#  area 0.0.0.9
#  !
# !
# router ospf LAB1
#  area 0.0.0.1
#  !
#  area 0.0.0.3
#   interface GigabitEthernet0/0/0/1
#    cost 10
#    authentication message-digest keychain iosxr
#   !
#  !
# !
# router ospf LAB3
#  area 0.0.0.3
#  !
# !
# router ospf ipv4
# !

# Using deleted
#
# ------------
# Before state
# ------------
#
#
# RP/0/0/CPU0:an-iosxr-02#show running-config router ospf
# Thu Oct 23 06:28:15.025 UTC
# router ospf LAB
#  area 0.0.0.0
#  !
#  area 0.0.0.9
#  !
# !
# router ospf LAB1
#  area 0.0.0.1
#  !
#  area 0.0.0.3
#   interface GigabitEthernet0/0/0/1
#    cost 10
#    authentication message-digest keychain iosxr
#   !
#  !
# !
# router ospf LAB3
#  area 0.0.0.3
#  !
# !
# router ospf ipv4
# !

- name: Deleted existing OSPF interfaces from the device
  cisco.iosxr.iosxr_ospf_interfaces:
    config:
      - name: GigabitEthernet0/0/0/1
        type: gigabitethernet
    state: deleted

#
#
# ------------------------
# Module Execution Result
# ------------------------
#
#  "before": [
#         {
#             "address_family": [
#                 {
#                     "afi": "ipv4",
#                     "authentication": {
#                         "message_digest": {
#                             "keychain": "iosxr"
#                         }
#                     },
#                     "cost": 10,
#                     "processes": [
#                         {
#                             "area": {
#                                 "area_id": "0.0.0.3"
#                             },
#                             "process_id": "LAB1"
#                         }
#                     ]
#                 }
#             ],
#             "name": "GigabitEthernet0/0/0/1",
#             "type": "gigabitethernet"
#         }
#     ],
#
#  "commands": [
#         "no router ospf LAB1 area 0.0.0.3 interface GigabitEthernet 0/0/0/1"
#     ]
#
#  "after": []
#
#
# -----------
# After state
# -----------
#
# RP/0/0/CPU0:an-iosxr-02#show running-config router ospf
# Thu Oct 23 06:34:38.319 UTC
# router ospf LAB
#  area 0.0.0.0
#  !
#  area 0.0.0.9
#  !
# !
# router ospf LAB1
#  area 0.0.0.1
#  !
#  area 0.0.0.3
#  !
# !
# router ospf LAB3
#  area 0.0.0.3
#  !
# !
# router ospf ipv4
# !

# Using parsed
# parsed.cfg
# ------------
# router ospf LAB
#  area 0.0.0.0
#  !
#  area 0.0.0.9
#  !
# !
# router ospf LAB1
#  area 0.0.0.1
#  !
#  area 0.0.0.3
#  !
# !
# router ospf LAB3
#  area 0.0.0.3
#   interface GigabitEthernet0/0/0/0
#    cost 20
#    authentication message-digest keychain cisco
#   !
#  !
# !
# router ospf ipv4
# !
- name: Parsed the device configuration to get output commands
  cisco.iosxr.iosxr_ospf_interfaces:
    running_config: "{{ lookup('file', './parsed.cfg') }}"
    state: parsed
#
#
# -------------------------
# Module Execution Result
# -------------------------
#
#
# "parsed": [
#         {
#             "address_family": [
#                 {
#                     "afi": "ipv4",
#                     "authentication": {
#                         "message_digest": {
#                             "keychain": "cisco"
#                         }
#                     },
#                     "cost": 20,
#                     "processes": [
#                         {
#                             "area": {
#                                 "area_id": "0.0.0.3"
#                             },
#                             "process_id": "LAB3"
#                         }
#                     ]
#                 }
#             ],
#             "name": "GigabitEthernet0/0/0/0",
#             "type": "gigabitethernet"
#         }
#     ]
#
# Using rendered
#
#
- name: Render the commands for provided  configuration
  cisco.iosxr.iosxr_ospf_interfaces:
    config:
      - name: GigabitEthernet0/0/0/0
        type: gigabitethernet
        address_family:
          - afi: ipv4
            processes:
             - process_id: "LAB3"
               area:
                 area_id: 0.0.0.3
            cost: 20
            authentication:
              message_digest:
                keychain: cisco
          - afi: ipv6
            processes:
             - process_id: "LAB3"
               area:
                 area_id: 0.0.0.2
            cost: 30
    state: rendered

#
#
# -------------------------
# Module Execution Result
# -------------------------
#
#
# "rendered": [
#        "router ospf LAB3 area 0.0.0.3 interface GigabitEthernet 0/0/0/0 cost 20",
#        "router ospf LAB3 area 0.0.0.3 interface GigabitEthernet 0/0/0/0 authentication message-digest",
#        "router ospf LAB3 area 0.0.0.3 interface GigabitEthernet 0/0/0/0 authentication message-digest keychain cisco",
#        "router ospfv3 LAB3 area 0.0.0.2 interface GigabitEthernet 0/0/0/0 cost 30"
#     ]


# Using gathered
#
# Before state:
# -------------
#
# RP/0/0/CPU0:an-iosxr-02#show running-config router ospf
# Thu Oct 23 06:50:38.743 UTC
# router ospf LAB
#  area 0.0.0.0
#  !
#  area 0.0.0.9
#  !
# !
# router ospf LAB1
#  area 0.0.0.1
#  !
#  area 0.0.0.3
#  !
# !
# router ospf LAB3
#  area 0.0.0.3
#   interface GigabitEthernet0/0/0/0
#    cost 20
#    authentication message-digest keychain cisco
#   !
#  !
# !
# router ospf ipv4
# !


- name: Gather ospf_interfaces routes configuration
  cisco.iosxr.iosxr_ospf_interfaces:
    state: gathered
#
#
# -------------------------
# Module Execution Result
# -------------------------
#
#    "gathered": [
#         {
#             "address_family": [
#                 {
#                     "afi": "ipv4",
#                     "authentication": {
#                         "message_digest": {
#                             "keychain": "cisco"
#                         }
#                     },
#                     "cost": 20,
#                     "processes": [
#                         {
#                             "area": {
#                                 "area_id": "0.0.0.3"
#                             },
#                             "process_id": "LAB3"
#                         }
#                     ]
#                 },
#                 {
#                     "afi": "ipv6",
#                     "cost": 30,
#                     "processes": [
#                         {
#                             "area": {
#                                 "area_id": "0.0.0.2"
#                             },
#                             "process_id": "LAB3"
#                         }
#                     ]
#                 }
#             ],
#             "name": "GigabitEthernet0/0/0/0",
#             "type": "gigabitethernet"
#         }
#     ]
#

Авторы

• Rohit Thakur (@rohitthakur2590)