cisco.iosxr.iosxr_ospfv2 – Модуль ресурсов OSPFv2

• Описание
• Параметры
• Примечания
• Примеры
• Возвращаемые значения

Описание

• Этот модуль управляет глобальной конфигурацией OSPFv2 на устройствах с Cisco IOS-XR

Параметры

Примечания

Примеры

# Using merged

# Before state:
# -------------
#
# RP/0/RP0/CPU0:anton#show running-config router ospf
# Thu Jun 11 15:54:44.569 UTC
# % No such configuration item(s)
#

- name: Merge provided OSPFv2 configuration with the existing configuration
  cisco.iosxr.iosxr_ospfv2:
    config:
      processes:
      - process_id: '27'
        areas:
        - area_id: '10'
          hello_interval: 2
          authentication:
            keychain: ansi11393
      - process_id: '26'
        adjacency_stagger:
          max_adjacency: 20
          min_adjacency: 10
      - process_id: '10'
        authentication:
          keychain: ansible_test1102
        areas:
        - area_id: '11'
          default_cost: 5
          cost: 11
        - area_id: 22
          default_cost: 6
      - process_id: '30'
        areas:
        - area_id: 11
          default_cost: 5
        - area_id: 22
          default_cost: 6

        cost: 2
        default_metric: 10
        transmit_delay: 2
        hello_interval: 1
        dead_interval: 2
        retransmit_interval: 2
        weight: 2
        packet_size: 577
        priority: 1
        router_id: 2.2.2.2
        demand_circuit: enable
        passive: disable
        summary_in: enable
        flood_reduction: disable
        mtu_ignore: enable
        external_out: disable
    state: merged

#
#
# ------------------------
# Module Execution Result
# ------------------------
#
#  "before": {}
#
#  "commands": [
#        "router ospf 30",
#        "cost 2",
#        "weight 2",
#        "passive disable",
#        "priority 1",
#        "flood-reduction disable",
#        "default-metric 10",
#        "router-id 2.2.2.2",
#        "demand-circuit enable",
#        "packet-size 577",
#        "transmit-delay 2",
#        "summary-in enable",
#        "external-out disable",
#        "dead-interval 2",
#        "hello-interval 1",
#        "retransmit-interval 2",
#        "mtu-ignore enable",
#        "area 11 default-cost 5",
#        "area 22 default-cost 6",
#        "router ospf 26",
#        "adjacency stagger 10 20",
#        "authentication message-digest keychain ansible1101pass",
#        "router ospf 27",
#        "area 10 authentication keychain ansi11393",
#        "area 10 hello-interval 2",
#        "router ospf 10",
#        "authentication keychain ansible_test1102",
#        "area 11 default-cost 5",
#        "area 11 cost 11",
#        "area 22 default-cost 6"
#    ]
#
#  "after": {
#        "processes": [
#            {
#                "areas": [
#                    {
#                        "area_id": "11",
#                        "cost": 11,
#                        "default_cost": 5
#                    },
#                    {
#                        "area_id": "22",
#                        "default_cost": 6
#                    }
#                ],
#                "authentication": {
#                    "keychain": "ansible_test1102"
#                },
#                "process_id": "10"
#            },
#            {
#                "adjacency_stagger": {
#                    "max_adjacency": 20,
#                    "min_adjacency": 10
#                },
#                "authentication": {
#                    "message_digest": {
#                        "keychain": "ansible1101pass"
#                    }
#                },
#                "process_id": "26"
#            },
#            {
#                "areas": [
#                    {
#                        "area_id": "10",
#                        "authentication": {
#                            "keychain": "ansi11393"
#                        },
#                        "hello_interval": 2
#                    }
#                ],
#                "process_id": "27"
#            },
#            {
#                "areas": [
#                    {
#                        "area_id": "11",
#                        "default_cost": 5
#                    },
#                    {
#                        "area_id": "22",
#                        "default_cost": 6
#                    }
#                ],
#                "cost": 2,
#                "dead_interval": 2,
#                "default_metric": 10,
#                "demand_circuit": "enable",
#                "external_out": "disable",
#                "flood_reduction": "disable",
#                "hello_interval": 1,
#                "mtu_ignore": "enable",
#                "packet_size": 577,
#                "passive": "disable",
#                "priority": 1,
#                "process_id": "30",
#                "retransmit_interval": 2,
#                "router_id": "2.2.2.2",
#                "summary_in": "enable",
#                "transmit_delay": 2,
#                "weight": 2
#            }
#        ]
#    }
#
#
# ------------
# After state
# ------------
#
# RP/0/RP0/CPU0:anton#show running-config router ospf
# Thu Jun 11 16:06:44.406 UTC
# router ospf 10
#  authentication keychain ansible_test1102
#  area 11
#   cost 11
#   default-cost 5
#  !
#  area 22
#   default-cost 6
#  !
# !
# router ospf 26
#  authentication message-digest keychain ansible1101pass
#  adjacency stagger 10 20
# !
# router ospf 27
#  area 10
#  authentication keychain ansi11393
#   hello-interval 2
# !
# !
# router ospf 30
#  router-id 2.2.2.2
#  summary-in enable
#  external-out disable
#  cost 2
#  packet-size 577
#  weight 2
#  passive disable
#  priority 1
#  mtu-ignore enable
#  flood-reduction disable
#  dead-interval 2
#  retransmit-interval 2
#  demand-circuit enable
#  hello-interval 1
#  transmit-delay 2
#  default-metric 10
#  area 11
#   default-cost 5
#  !
#  area 22
#   default-cost 6
#  !
# !
#


# Using replaced
#
# ------------
# Before state
# ------------
#
#
# RP/0/RP0/CPU0:anton#show running-config router ospf
# Thu Jun 11 16:06:44.406 UTC
# router ospf 10
#  authentication keychain ansible_test1102
#  area 11
#   cost 11
#   default-cost 5
#  !
#  area 22
#   default-cost 6
#  !
# !
# router ospf 26
#  authentication message-digest keychain ansible1101pass
#  adjacency stagger 10 20
# !
# router ospf 27
#  area 10
#  authentication keychain ansi11393
#   hello-interval 2
# !
# !
# router ospf 30
#  router-id 2.2.2.2
#  summary-in enable
#  external-out disable
#  cost 2
#  packet-size 577
#  weight 2
#  passive disable
#  priority 1
#  mtu-ignore enable
#  flood-reduction disable
#  dead-interval 2
#  retransmit-interval 2
#  demand-circuit enable
#  hello-interval 1
#  transmit-delay 2
#  default-metric 10
#  area 11
#   default-cost 5
#  !
#  area 22
#   default-cost 6
#  !
# !
#

- name: Replace OSPFv2 routes configurations from the device
  cisco.iosxr.iosxr_ospfv2:
    config:
      processes:
      - process_id: 27
        areas:
        - area_id: 10
          hello_interval: 2
        - area_id: 20
          cost: 2
          default_cost: 2
          authentication:
            keychain: ansi11393
      - process_id: 26
        adjacency_stagger:
          min_adjacency: 10
          max_adjacency: 20
    state: replaced

#
#
# ------------------------
# Module Execution Result
# ------------------------
#
#  "before": {
#        "processes": [
#            {
#                "areas": [
#                    {
#                        "area_id": "11",
#                        "cost": 11,
#                        "default_cost": 5
#                    },
#                    {
#                        "area_id": "22",
#                        "default_cost": 6
#                    }
#                ],
#                "authentication": {
#                    "keychain": "ansible_test1102"
#                },
#                "process_id": "10"
#            },
#            {
#                "adjacency_stagger": {
#                    "max_adjacency": 20,
#                    "min_adjacency": 10
#                },
#                "authentication": {
#                    "message_digest": {
#                        "keychain": "ansible1101pass"
#                    }
#                },
#                "process_id": "26"
#            },
#            {
#                "areas": [
#                    {
#                        "area_id": "10",
#                        "authentication": {
#                            "keychain": "ansi11393"
#                        },
#                        "hello_interval": 2
#                    }
#                ],
#                "process_id": "27"
#            },
#            {
#                "areas": [
#                    {
#                        "area_id": "11",
#                        "default_cost": 5
#                    },
#                    {
#                        "area_id": "22",
#                        "default_cost": 6
#                    }
#                ],
#                "cost": 2,
#                "dead_interval": 2,
#                "default_metric": 10,
#                "demand_circuit": "enable",
#                "external_out": "disable",
#                "flood_reduction": "disable",
#                "hello_interval": 1,
#                "mtu_ignore": "enable",
#                "packet_size": 577,
#                "passive": "disable",
#                "priority": 1,
#                "process_id": "30",
#                "retransmit_interval": 2,
#                "router_id": "2.2.2.2",
#                "summary_in": "enable",
#                "transmit_delay": 2,
#                "weight": 2
#            }
#        ]
#    }
#
#  "commands": [
#        "router ospf 27",
#        "no area 10 authentication keychain ansi11393",
#        "area 20 authentication keychain ansi11393",
#        "area 20 default-cost 2",
#        "area 20 cost 2"
#    ]
#
#  "after": {
#        "processes": [
#            {
#                "areas": [
#                    {
#                        "area_id": "11",
#                        "cost": 11,
#                        "default_cost": 5
#                    },
#                    {
#                        "area_id": "22",
#                        "default_cost": 6
#                    }
#                ],
#                "authentication": {
#                    "keychain": "ansible_test1102"
#                },
#                "process_id": "10"
#            },
#            {
#                "adjacency_stagger": {
#                    "max_adjacency": 20,
#                    "min_adjacency": 10
#                },
#                "authentication": {
#                    "message_digest": {
#                        "keychain": "ansible1101pass"
#                    }
#                },
#                "process_id": "26"
#            },
#            {
#                "areas": [
#                    {
#                        "area_id": "10",
#                        "hello_interval": 2
#                    },
#                    {
#                        "area_id": "20",
#                        "authentication": {
#                            "keychain": "ansi11393"
#                        },
#                        "cost": 2,
#                        "default_cost": 2
#                    }
#                ],
#                "process_id": "27"
#            },
#            {
#                "areas": [
#                    {
#                        "area_id": "11",
#                        "default_cost": 5
#                    },
#                    {
#                        "area_id": "22",
#                        "default_cost": 6
#                    }
#                ],
#                "cost": 2,
#                "dead_interval": 2,
#                "default_metric": 10,
#                "demand_circuit": "enable",
#                "external_out": "disable",
#                "flood_reduction": "disable",
#                "hello_interval": 1,
#                "mtu_ignore": "enable",
#                "packet_size": 577,
#                "passive": "disable",
#                "priority": 1,
#                "process_id": "30",
#                "retransmit_interval": 2,
#                "router_id": "2.2.2.2",
#                "summary_in": "enable",
#                "transmit_delay": 2,
#                "weight": 2
#            }
#        ]
#    }
#
#
# -----------
# After state
# -----------
#
# RP/0/RP0/CPU0:anton(config)#do show running-config router ospf
# Thu Jun 11 16:40:31.038 UTC
# router ospf 10
#  authentication keychain ansible_test1102
#  area 11
#   cost 11
#   default-cost 5
#  !
#  area 22
#   default-cost 6
#  !
# !
# router ospf 26
#  authentication message-digest keychain ansible1101pass
#  adjacency stagger 10 20
# !
# router ospf 27
#  area 10
#   hello-interval 2
#  !
#  area 20
#   cost 2
#   authentication keychain ansi11393
#   default-cost 2
#  !
# !
# router ospf 30
#  router-id 2.2.2.2
#  summary-in enable
#  external-out disable
#  cost 2
#  packet-size 577
#  weight 2
#  passive disable
#  priority 1
#  mtu-ignore enable
#  flood-reduction disable
#  dead-interval 2
#  retransmit-interval 2
#  demand-circuit enable
#  hello-interval 1
#  transmit-delay 2
#  default-metric 10
#  area 11
#   default-cost 5
#  !
#  area 22
#   default-cost 6
#  !
# !
#


# Using overridden
#
# ------------
# Before state
# ------------
#
#
# RP/0/RP0/CPU0:anton#show running-config router ospf
# Thu Jun 11 16:06:44.406 UTC
# router ospf 10
#  authentication keychain ansible_test1102
#  area 11
#   cost 11
#   default-cost 5
#  !
#  area 22
#   default-cost 6
#  !
# !
# router ospf 26
#  authentication message-digest keychain ansible1101pass
#  adjacency stagger 10 20
# !
# router ospf 27
#  area 10
#  authentication keychain ansi11393
#   hello-interval 2
# !
# !
# router ospf 30
#  router-id 2.2.2.2
#  summary-in enable
#  external-out disable
#  cost 2
#  packet-size 577
#  weight 2
#  passive disable
#  priority 1
#  mtu-ignore enable
#  flood-reduction disable
#  dead-interval 2
#  retransmit-interval 2
#  demand-circuit enable
#  hello-interval 1
#  transmit-delay 2
#  default-metric 10
#  area 11
#   default-cost 5
#  !
#  area 22
#   default-cost 6
#  !
# !
#

- name: Override existing OSPFv2 configurations from the device
  cisco.iosxr.iosxr_ospfv2:
    config:
      processes:
      - process_id: 27
        areas:
        - area_id: 10
          hello_interval: 2
          authentication:
            keychain: ansi11393
        - area_id: 20
          cost: 2
          default_cost: 2
          authentication:
            keychain: ansi11393
      - process_id: 26
        adjacency_stagger:
          min_adjacency: 10
          max_adjacency: 20
    state: overridden

#
#
# ------------------------
# Module Execution Result
# ------------------------
#
#  "before": {
#        "processes": [
#            {
#                "areas": [
#                    {
#                        "area_id": "11",
#                        "cost": 11,
#                        "default_cost": 5
#                    },
#                    {
#                        "area_id": "22",
#                        "default_cost": 6
#                    }
#                ],
#                "authentication": {
#                    "keychain": "ansible_test1102"
#                },
#                "process_id": "10"
#            },
#            {
#                "adjacency_stagger": {
#                    "max_adjacency": 20,
#                    "min_adjacency": 10
#                },
#                "authentication": {
#                    "message_digest": {
#                        "keychain": "ansible1101pass"
#                    }
#                },
#                "process_id": "26"
#            },
#            {
#                "areas": [
#                    {
#                        "area_id": "10",
#                        "authentication": {
#                            "keychain": "ansi11393"
#                        },
#                        "hello_interval": 2
#                    }
#                ],
#                "process_id": "27"
#            },
#            {
#                "areas": [
#                    {
#                        "area_id": "11",
#                        "default_cost": 5
#                    },
#                    {
#                        "area_id": "22",
#                        "default_cost": 6
#                    }
#                ],
#                "cost": 2,
#                "dead_interval": 2,
#                "default_metric": 10,
#                "demand_circuit": "enable",
#                "external_out": "disable",
#                "flood_reduction": "disable",
#                "hello_interval": 1,
#                "mtu_ignore": "enable",
#                "packet_size": 577,
#                "passive": "disable",
#                "priority": 1,
#                "process_id": "30",
#                "retransmit_interval": 2,
#                "router_id": "2.2.2.2",
#                "summary_in": "enable",
#                "transmit_delay": 2,
#                "weight": 2
#            }
#        ]
#    }
#
#  "commands": [
#        "router ospf 10",
#        "no authentication keychain ansible_test1102",
#        "no area 11 default-cost 5",
#        "no area 11 cost 11",
#        "no area 22 default-cost 6",
#        "router ospf 30",
#        "no cost 2",
#        "no weight 2",
#        "no passive disable",
#        "no priority 1",
#        "no flood-reduction disable",
#        "no default-metric 10",
#        "no router-id 2.2.2.2",
#        "no demand-circuit enable",
#        "no packet-size 577",
#        "no transmit-delay 2",
#        "no summary-in enable",
#        "no external-out disable",
#        "no dead-interval 2",
#        "no hello-interval 1",
#        "no retransmit-interval 2",
#        "no mtu-ignore enable",
#        "no area 11 default-cost 5",
#        "no area 22 default-cost 6",
#        "router ospf 27",
#        "area 20 authentication keychain ansi11393",
#        "area 20 default-cost 2",
#        "area 20 cost 2"
#    ]
#
#  "after": {
#        "processes": [
#            {
#                "process_id": "10"
#            },
#            {
#                "adjacency_stagger": {
#                    "max_adjacency": 20,
#                    "min_adjacency": 10
#                },
#                "authentication": {
#                    "message_digest": {
#                        "keychain": "ansible1101pass"
#                    }
#                },
#                "process_id": "26"
#            },
#            {
#                "areas": [
#                    {
#                        "area_id": "10",
#                        "authentication": {
#                            "keychain": "ansi11393"
#                        },
#                        "hello_interval": 2
#                    },
#                    {
#                        "area_id": "20",
#                        "authentication": {
#                            "keychain": "ansi11393"
#                        },
#                        "cost": 2,
#                        "default_cost": 2
#                    }
#                ],
#                "process_id": "27"
#            },
#            {
#                "process_id": "30"
#            }
#        ]
#    }
#
#
# -----------
# After state
# -----------
#
# RP/0/RP0/CPU0:anton#show running-config router ospf
# Thu Jun 11 16:50:36.332 UTC
# router ospf 10
# !
# router ospf 26
#  authentication message-digest keychain ansible1101pass
#  adjacency stagger 10 20
# !
# router ospf 27
#  area 10
#   authentication keychain ansi11393
#   hello-interval 2
#  !
#  area 20
#   cost 2
#   authentication keychain ansi11393
#   default-cost 2
#  !
# !
# router ospf 30
# !
#


# Using deleted
#
# ------------
# Before state
# ------------
#
#
# RP/0/RP0/CPU0:anton#show running-config router ospf
# Thu Jun 11 16:06:44.406 UTC
# router ospf 10
#  authentication keychain ansible_test1102
#  area 11
#   cost 11
#   default-cost 5
#  !
#  area 22
#   default-cost 6
#  !
# !
# router ospf 26
#  authentication message-digest keychain ansible1101pass
#  adjacency stagger 10 20
# !
# router ospf 27
#  area 10
#  authentication keychain ansi11393
#   hello-interval 2
# !
# !
# router ospf 30
#  router-id 2.2.2.2
#  summary-in enable
#  external-out disable
#  cost 2
#  packet-size 577
#  weight 2
#  passive disable
#  priority 1
#  mtu-ignore enable
#  flood-reduction disable
#  dead-interval 2
#  retransmit-interval 2
#  demand-circuit enable
#  hello-interval 1
#  transmit-delay 2
#  default-metric 10
#  area 11
#   default-cost 5
#  !
#  area 22
#   default-cost 6
#  !
# !
#

- name: Deleted existing OSPFv2 configurations from the device
  cisco.iosxr.iosxr_ospfv2:
    config:
      processes:
      - process_id: '10'
      - process_id: '26'
      - process_id: '27'
      - process_id: '30'
    state: deleted

#
#
# ------------------------
# Module Execution Result
# ------------------------
#
#  "before": {
#        "processes": [
#            {
#                "areas": [
#                    {
#                        "area_id": "11",
#                        "cost": 11,
#                        "default_cost": 5
#                    },
#                    {
#                        "area_id": "22",
#                        "default_cost": 6
#                    }
#                ],
#                "authentication": {
#                    "keychain": "ansible_test1102"
#                },
#                "process_id": "10"
#            },
#            {
#                "adjacency_stagger": {
#                    "max_adjacency": 20,
#                    "min_adjacency": 10
#                },
#                "authentication": {
#                    "message_digest": {
#                        "keychain": "ansible1101pass"
#                    }
#                },
#                "process_id": "26"
#            },
#            {
#                "areas": [
#                    {
#                        "area_id": "10",
#                        "authentication": {
#                            "keychain": "ansi11393"
#                        },
#                        "hello_interval": 2
#                    }
#                ],
#                "process_id": "27"
#            },
#            {
#                "areas": [
#                    {
#                        "area_id": "11",
#                        "default_cost": 5
#                    },
#                    {
#                        "area_id": "22",
#                        "default_cost": 6
#                    }
#                ],
#                "cost": 2,
#                "dead_interval": 2,
#                "default_metric": 10,
#                "demand_circuit": "enable",
#                "external_out": "disable",
#                "flood_reduction": "disable",
#                "hello_interval": 1,
#                "mtu_ignore": "enable",
#                "packet_size": 577,
#                "passive": "disable",
#                "priority": 1,
#                "process_id": "30",
#                "retransmit_interval": 2,
#                "router_id": "2.2.2.2",
#                "summary_in": "enable",
#                "transmit_delay": 2,
#                "weight": 2
#            }
#        ]
#    },
#
#  "commands": [
#        "router ospf 10",
#        "no authentication keychain ansible_test1102",
#        "no area 11 default-cost 5",
#        "no area 11 cost 11",
#        "no area 22 default-cost 6",
#        "router ospf 26",
#        "no adjacency stagger 10 20",
#        "no authentication message-digest keychain ansible1101pass",
#        "router ospf 27",
#        "no area 10 authentication keychain ansi11393",
#        "no area 10 hello-interval 2",
#        "router ospf 30",
#        "no cost 2",
#        "no weight 2",
#        "no passive disable",
#        "no priority 1",
#        "no flood-reduction disable",
#        "no default-metric 10",
#        "no router-id 2.2.2.2",
#        "no demand-circuit enable",
#        "no packet-size 577",
#        "no transmit-delay 2",
#        "no summary-in enable",
#        "no external-out disable",
#        "no dead-interval 2",
#        "no hello-interval 1",
#        "no retransmit-interval 2",
#        "no mtu-ignore enable",
#        "no area 11 default-cost 5",
#        "no area 22 default-cost 6"
#    ]
#
#  "after": {
#        "processes": [
#            {
#                "process_id": "10"
#            },
#            {
#                "process_id": "26"
#            },
#            {
#                "process_id": "27"
#            },
#            {
#                "process_id": "30"
#            }
#        ]
#    }
#
#
# -----------
# After state
# -----------
#
# RP/0/RP0/CPU0:anton(config)#show running-config router ospf
# Thu Jun 11 17:07:34.218 UTC
# router ospf 10
# !
# router ospf 26
# !
# router ospf 27
# !
# router ospf 30
# !


# Using parsed
# parsed.cfg
# ------------
# Thu Jun 11 17:28:51.918 UTC
# router ospf 10
#  authentication keychain ansible_test1102
#  area 11
#   cost 11
#   default-cost 5
#  !
#  area 22
#   default-cost 6
#  !
# !
# router ospf 26
#  authentication message-digest keychain ansible1101pass
#  adjacency stagger 10 20
# !
# router ospf 27
#  area 10
#   authentication keychain ansi11393
#   hello-interval 2
#  !
# !
# router ospf 30
#  router-id 2.2.2.2
#  summary-in enable
#  external-out disable
#  cost 2
#  packet-size 577
#  weight 2
#  passive disable
#  priority 1
#  mtu-ignore enable
#  flood-reduction disable
#  dead-interval 2
#  retransmit-interval 2
#  demand-circuit enable
#  hello-interval 1
#  transmit-delay 2
#  default-metric 10
#  area 11
#   default-cost 5
#  !
#  area 22
#   default-cost 6
#  !
# !
- name: Parsed the device configuration to get output commands
  cisco.iosxr.iosxr_ospfv2:
    running_config: "{{ lookup('file', './parsed.cfg') }}"
    state: parsed
#
#
# -------------------------
# Module Execution Result
# -------------------------
#
#
# "parsed": {
#        "processes": [
#            {
#                "areas": [
#                    {
#                        "area_id": "11",
#                        "cost": 11,
#                        "default_cost": 5
#                    },
#                    {
#                        "area_id": "22",
#                        "default_cost": 6
#                    }
#                ],
#                "authentication": {
#                    "keychain": "ansible_test1102"
#                },
#                "process_id": "10"
#            },
#            {
#                "adjacency_stagger": {
#                    "max_adjacency": 20,
#                    "min_adjacency": 10
#                },
#                "authentication": {
#                    "message_digest": {
#                        "keychain": "ansible1101pass"
#                    }
#                },
#                "process_id": "26"
#            },
#            {
#                "areas": [
#                    {
#                        "area_id": "10",
#                        "authentication": {
#                            "keychain": "ansi11393"
#                        },
#                        "hello_interval": 2
#                    }
#                ],
#                "process_id": "27"
#            },
#            {
#                "areas": [
#                    {
#                        "area_id": "11",
#                        "default_cost": 5
#                    },
#                    {
#                        "area_id": "22",
#                        "default_cost": 6
#                    }
#                ],
#                "cost": 2,
#                "dead_interval": 2,
#                "default_metric": 10,
#                "demand_circuit": "enable",
#                "external_out": "disable",
#                "flood_reduction": "disable",
#                "hello_interval": 1,
#                "mtu_ignore": "enable",
#                "packet_size": 577,
#                "passive": "disable",
#                "priority": 1,
#                "process_id": "30",
#                "retransmit_interval": 2,
#                "router_id": "2.2.2.2",
#                "summary_in": "enable",
#                "transmit_delay": 2,
#                "weight": 2
#            }
#        ]
#    }



# Using rendered
#
#
- name: Render the commands for provided  configuration
  cisco.iosxr.iosxr_ospfv2:
    config:
      processes:
      - process_id: 27
        areas:
        - area_id: 10
          hello_interval: 2
          authentication:
            keychain: ansi11393
      - process_id: 26
        adjacency_stagger:
          min_adjacency: 10
          max_adjacency: 20
      - process_id: 10
        authentication:
          keychain: ansible_test1102
        areas:
        - area_id: 11
          default_cost: 5
          cost: 11
        - area_id: 22
          default_cost: 6
      - process_id: 30
        areas:
        - area_id: 11
          default_cost: 5
        - area_id: 22
          default_cost: 6

        cost: 2
        default_metric: 10
        transmit_delay: 2
        hello_interval: 1
        dead_interval: 2
        retransmit_interval: 2
        weight: 2
        packet_size: 577
        priority: 1
        router_id: 2.2.2.2
        demand_circuit: enable
        passive: disable
        summary_in: enable
        flood_reduction: disable
        mtu_ignore: enable
        external_out: disable
    state: rendered

#
#
# -------------------------
# Module Execution Result
# -------------------------
#
#
# "rendered": [
#        "router ospf 27",
#        "area 10 authentication keychain ansi11393",
#        "area 10 hello-interval 2",
#        "router ospf 26",
#        "adjacency stagger 10 20",
#        "authentication message-digest keychain ansible1101pass",
#        "router ospf 10",
#        "authentication keychain ansible_test1102",
#        "area 11 default-cost 5",
#        "area 11 cost 11",
#        "area 22 default-cost 6",
#        "router ospf 30",
#        "cost 2",
#        "weight 2",
#        "passive disable",
#        "priority 1",
#        "flood-reduction disable",
#        "default-metric 10",
#        "router-id 2.2.2.2",
#        "demand-circuit enable",
#        "packet-size 577",
#        "transmit-delay 2",
#        "summary-in enable",
#        "external-out disable",
#        "dead-interval 2",
#        "hello-interval 1",
#        "retransmit-interval 2",
#        "mtu-ignore enable",
#        "area 11 default-cost 5",
#        "area 22 default-cost 6"
#    ]


# Using gathered
#
# Before state:
# -------------
#
# RP/0/RP0/CPU0:anton#show running-config router ospf
# Thu Jun 11 16:06:44.406 UTC
# router ospf 10
#  authentication keychain ansible_test1102
#  area 11
#   cost 11
#   default-cost 5
#  !
#  area 22
#   default-cost 6
#  !
# !
# router ospf 26
#  authentication message-digest keychain ansible1101pass
#  adjacency stagger 10 20
# !
# router ospf 27
#  area 10
#  authentication keychain ansi11393
#   hello-interval 2
# !
# !
# router ospf 30
#  router-id 2.2.2.2
#  summary-in enable
#  external-out disable
#  cost 2
#  packet-size 577
#  weight 2
#  passive disable
#  priority 1
#  mtu-ignore enable
#  flood-reduction disable
#  dead-interval 2
#  retransmit-interval 2
#  demand-circuit enable
#  hello-interval 1
#  transmit-delay 2
#  default-metric 10
#  area 11
#   default-cost 5
#  !
#  area 22
#   default-cost 6
#  !
# !
#
- name: Gather ospfv2 routes configuration
  cisco.iosxr.iosxr_ospfv2:
    state: gathered
#
#
# -------------------------
# Module Execution Result
# -------------------------
#
#    "gathered": {
#        "processes": [
#            {
#                "areas": [
#                    {
#                        "area_id": "11",
#                        "cost": 11,
#                        "default_cost": 5
#                    },
#                    {
#                        "area_id": "22",
#                        "default_cost": 6
#                    }
#                ],
#                "authentication": {
#                    "keychain": "ansible_test1102"
#                },
#                "process_id": "10"
#            },
#            {
#                "adjacency_stagger": {
#                    "max_adjacency": 20,
#                    "min_adjacency": 10
#                },
#                "authentication": {
#                    "message_digest": {
#                        "keychain": "ansible1101pass"
#                    }
#                },
#                "process_id": "26"
#            },
#            {
#                "areas": [
#                    {
#                        "area_id": "10",
#                        "authentication": {
#                            "keychain": "ansi11393"
#                        },
#                        "hello_interval": 2
#                    }
#                ],
#                "process_id": "27"
#            },
#            {
#                "areas": [
#                    {
#                        "area_id": "11",
#                        "default_cost": 5
#                    },
#                    {
#                        "area_id": "22",
#                        "default_cost": 6
#                    }
#                ],
#                "cost": 2,
#                "dead_interval": 2,
#                "default_metric": 10,
#                "demand_circuit": "enable",
#                "external_out": "disable",
#                "flood_reduction": "disable",
#                "hello_interval": 1,
#                "mtu_ignore": "enable",
#                "packet_size": 577,
#                "passive": "disable",
#                "priority": 1,
#                "process_id": "30",
#                "retransmit_interval": 2,
#                "router_id": "2.2.2.2",
#                "summary_in": "enable",
#                "transmit_delay": 2,
#                "weight": 2
#            }
#        ]
#    }
#
# After state:
# -------------
#
# RP/0/RP0/CPU0:anton#show running-config router ospf
# Thu Jun 11 16:06:44.406 UTC
# router ospf 10
#  authentication keychain ansible_test1102
#  area 11
#   cost 11
#   default-cost 5
#  !
#  area 22
#   default-cost 6
#  !
# !
# router ospf 26
#  authentication message-digest keychain ansible1101pass
#  adjacency stagger 10 20
# !
# router ospf 27
#  area 10
#  authentication keychain ansi11393
#   hello-interval 2
# !
# !
# router ospf 30
# router-id 2.2.2.2
# summary-in enable
# external-out disable
# cost 2
# packet-size 577
# weight 2
# passive disable
# priority 1
# mtu-ignore enable
# flood-reduction disable
# dead-interval 2
# retransmit-interval 2
# demand-circuit enable
# hello-interval 1
# transmit-delay 2
# default-metric 10
# area 11
#  default-cost 5
# !
# area 22
#  default-cost 6
# !
# !
#
#

Возвращаемые значения

Общие возвращаемые значения описаны здесь, следующие поля уникальны для данного модуля:

Авторы

• Rohit Thakur (@rohitthakur2590)