cisco.nxos.nxos_ospfv2 – Модуль ресурсов OSPFv2

• Обзор
• Параметры
• Примечания
• Примеры
• Возвращаемые значения

Обзор

• Этот модуль управляет конфигурацией OSPFv2 на устройствах, работающих под управлением Cisco NX-OS.

Параметры

Примечания

Примеры

# Using merged

# Before state:
# -------------
# nxos-9k-rdo# sh running-config | section "^router ospf .*"
# nxos-9k-rdo#

- name: Merge the provided configuration with the exisiting running configuration
  cisco.nxos.nxos_ospfv2:
    config:
      processes:
      - process_id: 100
        router_id: 203.0.113.20
      - process_id: 102
        router_id: 198.51.100.1
        areas:
        - area_id: 0.0.0.100
          filter_list:
          - route_map: rmap_1
            direction: in
          - route_map: rmap_2
            direction: out
          ranges:
          - prefix: 198.51.100.64/27
            not_advertise: true
          - prefix: 198.51.100.96/27
            cost: 120
        - area_id: 0.0.0.101
          authentication:
            message_digest: true
        redistribute:
        - protocol: eigrp
          id: 120
          route_map: rmap_1
        - protocol: direct
          route_map: ospf102-direct-connect
        vrfs:
        - vrf: zone1
          router_id: 198.51.100.129
          redistribute:
          - protocol: static
            route_map: zone1-static-connect
          summary_address:
          - prefix: 198.51.100.128/27
            tag: 121
          - prefix: 198.51.100.160/27
          areas:
          - area_id: 0.0.0.102
            nssa:
              default_information_originate: true
              no_summary: true
          - area_id: 0.0.0.103
            nssa:
              no_summary: true
              translate:
                type7:
                  always: true
        - vrf: zone2
          auto_cost:
            reference_bandwidth: 45
            unit: Gbps
    state: merged

# Task output
# -------------
# before: {}
#
# commands:
#  - router ospf 102
#  - router-id 198.51.100.1
#  - redistribute eigrp 120 route-map rmap_1
#  - redistribute direct route-map ospf102-direct-connect
#  - area 0.0.0.100 filter-list route-map rmap_1 in
#  - area 0.0.0.100 filter-list route-map rmap_2 out
#  - area 0.0.0.100 range 198.51.100.64/27 not-advertise
#  - area 0.0.0.100 range 198.51.100.96/27 cost 120
#  - area 0.0.0.101 authentication message-digest
#  - vrf zone1
#  - router-id 198.51.100.129
#  - summary-address 198.51.100.128/27 tag 121
#  - summary-address 198.51.100.160/27
#  - redistribute static route-map zone1-static-connect
#  - area 0.0.0.102 nssa no-summary default-information-originate
#  - area 0.0.0.103 nssa no-summary
#  - area 0.0.0.103 nssa translate type7 always
#  - vrf zone2
#  - auto-cost reference-bandwidth 45 Gbps
#  - router ospf 100
#  - router-id 203.0.113.20
#
# after:
#    processes:
#    - process_id: "100"
#      router_id: 203.0.113.20
#    - areas:
#      - area_id: 0.0.0.100
#        filter_list:
#        - direction: out
#          route_map: rmap_2
#        - direction: in
#          route_map: rmap_1
#        ranges:
#        - not_advertise: true
#          prefix: 198.51.100.64/27
#        - cost: 120
#          prefix: 198.51.100.96/27
#      - area_id: 0.0.0.101
#        authentication:
#          message_digest: true
#      process_id: "102"
#      redistribute:
#      - protocol: direct
#        route_map: ospf102-direct-connect
#      - id: "120"
#        protocol: eigrp
#        route_map: rmap_1
#      router_id: 198.51.100.1
#      vrfs:
#      - areas:
#        - area_id: 0.0.0.102
#          nssa:
#            default_information_originate: true
#            no_summary: true
#        - area_id: 0.0.0.103
#          nssa:
#            no_summary: true
#            translate:
#              type7:
#                always: true
#        redistribute:
#        - protocol: static
#          route_map: zone1-static-connect
#        router_id: 198.51.100.129
#        vrf: zone1
#      - auto_cost:
#          reference_bandwidth: 45
#          unit: Gbps
#        vrf: zone2
#

# After state:
# ------------
# nxos-9k-rdo# sh running-config | section "^router ospf .*"
# router ospf 100
#   router-id 203.0.113.20
# router ospf 102
#   router-id 198.51.100.1
#   redistribute direct route-map ospf102-direct-connect
#   redistribute eigrp 120 route-map rmap_1
#   area 0.0.0.100 filter-list route-map rmap_2 out
#   area 0.0.0.100 filter-list route-map rmap_1 in
#   area 0.0.0.100 range 198.51.100.64/27 not-advertise
#   area 0.0.0.100 range 198.51.100.96/27 cost 120
#   area 0.0.0.101 authentication message-digest
#   vrf zone1
#     router-id 198.51.100.129
#     area 0.0.0.102 nssa no-summary default-information-originate
#     area 0.0.0.103 nssa no-summary
#     area 0.0.0.103 nssa translate type7 always
#     redistribute static route-map zone1-static-connect
#     summary-address 198.51.100.128/27 tag 121
#     summary-address 198.51.100.160/27
#   vrf zone2
#     auto-cost reference-bandwidth 45 Gbps

# Using replaced

# Before state:
# ------------
# nxos-9k-rdo# sh running-config | section "^router ospf .*"
# router ospf 100
#   router-id 203.0.113.20
# router ospf 102
#   router-id 198.51.100.1
#   redistribute direct route-map ospf102-direct-connect
#   redistribute eigrp 120 route-map rmap_1
#   area 0.0.0.100 filter-list route-map rmap_2 out
#   area 0.0.0.100 filter-list route-map rmap_1 in
#   area 0.0.0.100 range 198.51.100.64/27 not-advertise
#   area 0.0.0.100 range 198.51.100.96/27 cost 120
#   area 0.0.0.101 authentication message-digest
#   vrf zone1
#     router-id 198.51.100.129
#     area 0.0.0.102 nssa no-summary default-information-originate
#     area 0.0.0.103 nssa no-summary
#     area 0.0.0.103 nssa translate type7 always
#     redistribute static route-map zone1-static-connect
#     summary-address 198.51.100.128/27 tag 121
#     summary-address 198.51.100.160/27
#   vrf zone2
#     auto-cost reference-bandwidth 45 Gbps

- name: Replace device configurations of listed OSPF processes with provided configurations
  cisco.nxos.nxos_ospfv2:
    config:
      processes:
      - process_id: 102
        router_id: 198.51.100.1
        areas:
        - area_id: 0.0.0.100
          filter_list:
          - route_map: rmap_8
            direction: in
          ranges:
          - prefix: 198.51.100.64/27
            not_advertise: true
        - area_id: 0.0.0.101
          stub:
            no_summary: true
        redistribute:
        - protocol: eigrp
          id: 130
          route_map: rmap_1
        - protocol: direct
          route_map: ospf102-direct-connect
        vrfs:
        - vrf: zone1
          router_id: 198.51.100.129
          redistribute:
          - protocol: bgp
            id: 65563
            route_map: zone1-bgp-connect
          areas:
          - area_id: 0.0.0.102
            nssa:
              default_information_originate: true
              no_summary: true
    state: replaced

# Task output
# -------------
# before:
#    processes:
#    - process_id: "100"
#      router_id: 203.0.113.20
#    - areas:
#      - area_id: 0.0.0.100
#        filter_list:
#        - direction: out
#          route_map: rmap_2
#        - direction: in
#          route_map: rmap_1
#        ranges:
#        - not_advertise: true
#          prefix: 198.51.100.64/27
#        - cost: 120
#          prefix: 198.51.100.96/27
#      - area_id: 0.0.0.101
#        authentication:
#          message_digest: true
#      process_id: "102"
#      redistribute:
#      - protocol: direct
#        route_map: ospf102-direct-connect
#      - id: "120"
#        protocol: eigrp
#        route_map: rmap_1
#      router_id: 198.51.100.1
#      vrfs:
#      - areas:
#        - area_id: 0.0.0.102
#          nssa:
#            default_information_originate: true
#            no_summary: true
#        - area_id: 0.0.0.103
#          nssa:
#            no_summary: true
#            translate:
#              type7:
#                always: true
#        redistribute:
#        - protocol: static
#          route_map: zone1-static-connect
#        router_id: 198.51.100.129
#        vrf: zone1
#      - auto_cost:
#          reference_bandwidth: 45
#          unit: Gbps
#        vrf: zone2
#
#  commands:
#  - router ospf 102
#  - redistribute eigrp 130 route-map rmap_1
#  - no redistribute eigrp 120 route-map rmap_1
#  - area 0.0.0.100 filter-list route-map rmap_8 in
#  - no area 0.0.0.100 filter-list route-map rmap_2 out
#  - no area 0.0.0.100 range 198.51.100.96/27
#  - no area 0.0.0.101 authentication
#  - area 0.0.0.101 stub no-summary
#  - vrf zone1
#  - no summary-address 198.51.100.128/27 tag 121
#  - no summary-address 198.51.100.160/27
#  - redistribute bgp 65563 route-map zone1-bgp-connect
#  - no redistribute static route-map zone1-static-connect
#  - no area 0.0.0.103 nssa
#  - no area 0.0.0.103 nssa translate type7 always
#  - no vrf zone2
#
# after:
#    processes:
#    - process_id: "100"
#      router_id: 203.0.113.20
#    - areas:
#      - area_id: 0.0.0.101
#        stub:
#          no_summary: true
#      - area_id: 0.0.0.100
#        filter_list:
#        - direction: in
#          route_map: rmap_8
#        ranges:
#        - not_advertise: true
#          prefix: 198.51.100.64/27
#      process_id: "102"
#      redistribute:
#      - protocol: direct
#        route_map: ospf102-direct-connect
#      - id: "130"
#        protocol: eigrp
#        route_map: rmap_1
#      router_id: 198.51.100.1
#      vrfs:
#      - areas:
#        - area_id: 0.0.0.102
#          nssa:
#            default_information_originate: true
#            no_summary: true
#        redistribute:
#        - id: "65563"
#          protocol: bgp
#          route_map: zone1-bgp-connect
#        router_id: 198.51.100.129
#        vrf: zone1

# After state:
# ------------
# nxos-9k-rdo# sh running-config | section "^router ospf .*"
# router ospf 100
#   router-id 203.0.113.20
# router ospf 102
#   router-id 198.51.100.1
#   area 0.0.0.101 stub no-summary
#   redistribute direct route-map ospf102-direct-connect
#   redistribute eigrp 130 route-map rmap_1
#   area 0.0.0.100 filter-list route-map rmap_8 in
#   area 0.0.0.100 range 198.51.100.64/27 not-advertise
#   vrf zone1
#     router-id 198.51.100.129
#     area 0.0.0.102 nssa no-summary default-information-originate
#     redistribute bgp 65563 route-map zone1-bgp-connect

# Using overridden

# Before state:
# ------------
# nxos-9k-rdo# sh running-config | section "^router ospf .*"
# router ospf 100
#   router-id 203.0.113.20
# router ospf 102
#   router-id 198.51.100.1
#   redistribute direct route-map ospf102-direct-connect
#   redistribute eigrp 120 route-map rmap_1
#   area 0.0.0.100 filter-list route-map rmap_2 out
#   area 0.0.0.100 filter-list route-map rmap_1 in
#   area 0.0.0.100 range 198.51.100.64/27 not-advertise
#   area 0.0.0.100 range 198.51.100.96/27 cost 120
#   area 0.0.0.101 authentication message-digest
#   vrf zone1
#     router-id 198.51.100.129
#     area 0.0.0.102 nssa no-summary default-information-originate
#     area 0.0.0.103 nssa no-summary
#     area 0.0.0.103 nssa translate type7 always
#     redistribute static route-map zone1-static-connect
#     summary-address 198.51.100.128/27 tag 121
#     summary-address 198.51.100.160/27
#   vrf zone2
#     auto-cost reference-bandwidth 45 Gbps

- name: Overridde all OSPF configuration with provided configuration
  cisco.nxos.nxos_ospfv2:
    config:
      processes:
      - process_id: 104
        router_id: 203.0.113.20
      - process_id: 102
        router_id: 198.51.100.1
        shutdown: true
    state: overridden

# Task output
# -------------
# before:
#    processes:
#    - process_id: "100"
#      router_id: 203.0.113.20
#    - areas:
#      - area_id: 0.0.0.100
#        filter_list:
#        - direction: out
#          route_map: rmap_2
#        - direction: in
#          route_map: rmap_1
#        ranges:
#        - not_advertise: true
#          prefix: 198.51.100.64/27
#        - cost: 120
#          prefix: 198.51.100.96/27
#      - area_id: 0.0.0.101
#        authentication:
#          message_digest: true
#      process_id: "102"
#      redistribute:
#      - protocol: direct
#        route_map: ospf102-direct-connect
#      - id: "120"
#        protocol: eigrp
#        route_map: rmap_1
#      router_id: 198.51.100.1
#      vrfs:
#      - areas:
#        - area_id: 0.0.0.102
#          nssa:
#            default_information_originate: true
#            no_summary: true
#        - area_id: 0.0.0.103
#          nssa:
#            no_summary: true
#            translate:
#              type7:
#                always: true
#        redistribute:
#        - protocol: static
#          route_map: zone1-static-connect
#        router_id: 198.51.100.129
#        vrf: zone1
#      - auto_cost:
#          reference_bandwidth: 45
#          unit: Gbps
#        vrf: zone2
#
# commands:
#  - no router ospf 100
#  - router ospf 104
#  - router-id 203.0.113.20
#  - router ospf 102
#  - shutdown
#  - no redistribute direct route-map ospf102-direct-connect
#  - no redistribute eigrp 120 route-map rmap_1
#  - no area 0.0.0.100 filter-list route-map rmap_2 out
#  - no area 0.0.0.100 filter-list route-map rmap_1 in
#  - no area 0.0.0.100 range 198.51.100.64/27
#  - no area 0.0.0.100 range 198.51.100.96/27
#  - no area 0.0.0.101 authentication
#  - no vrf zone1
#  - no vrf zone2
#
# after:
#    processes:
#    - process_id: "102"
#      router_id: 198.51.100.1
#      shutdown: true
#    - process_id: "104"
#      router_id: 203.0.113.20

# After state:
# ------------
# nxos-9k-rdo# sh running-config | section "^router ospf .*"
# router ospf 102
#   router-id 198.51.100.1
#   shutdown
# router ospf 104
#   router-id 203.0.113.20

# Using deleted to delete a single OSPF process

# Before state:
# ------------
# nxos-9k-rdo# sh running-config | section "^router ospf .*"
# router ospf 100
#   router-id 203.0.113.20
# router ospf 102
#   router-id 198.51.100.1
#   redistribute direct route-map ospf102-direct-connect
#   redistribute eigrp 120 route-map rmap_1
#   area 0.0.0.100 filter-list route-map rmap_2 out
#   area 0.0.0.100 filter-list route-map rmap_1 in
#   area 0.0.0.100 range 198.51.100.64/27 not-advertise
#   area 0.0.0.100 range 198.51.100.96/27 cost 120
#   area 0.0.0.101 authentication message-digest
#   vrf zone1
#     router-id 198.51.100.129
#     area 0.0.0.102 nssa no-summary default-information-originate
#     area 0.0.0.103 nssa no-summary
#     area 0.0.0.103 nssa translate type7 always
#     redistribute static route-map zone1-static-connect
#     summary-address 198.51.100.128/27 tag 121
#     summary-address 198.51.100.160/27
#   vrf zone2
#     auto-cost reference-bandwidth 45 Gbps

- name: Delete a single OSPF process
  cisco.nxos.nxos_ospfv2:
    config:
      processes:
      - process_id: 102
    state: deleted

# Task output
# -------------
# before:
#    processes:
#    - process_id: "100"
#      router_id: 203.0.113.20
#    - areas:
#      - area_id: 0.0.0.100
#        filter_list:
#        - direction: out
#          route_map: rmap_2
#        - direction: in
#          route_map: rmap_1
#        ranges:
#        - not_advertise: true
#          prefix: 198.51.100.64/27
#        - cost: 120
#          prefix: 198.51.100.96/27
#      - area_id: 0.0.0.101
#        authentication:
#          message_digest: true
#      process_id: "102"
#      redistribute:
#      - protocol: direct
#        route_map: ospf102-direct-connect
#      - id: "120"
#        protocol: eigrp
#        route_map: rmap_1
#      router_id: 198.51.100.1
#      vrfs:
#      - areas:
#        - area_id: 0.0.0.102
#          nssa:
#            default_information_originate: true
#            no_summary: true
#        - area_id: 0.0.0.103
#          nssa:
#            no_summary: true
#            translate:
#              type7:
#                always: true
#        redistribute:
#        - protocol: static
#          route_map: zone1-static-connect
#        router_id: 198.51.100.129
#        vrf: zone1
#      - auto_cost:
#          reference_bandwidth: 45
#          unit: Gbps
#        vrf: zone2
#
# commands:
#  - no router ospf 102
#
# after:
#   processes:
#   - process_id: "100"
#     router_id: 203.0.113.20

# After state:
# ------------
# nxos-9k-rdo# sh running-config | section "^router ospf .*"
# router ospf 100
#   router-id 203.0.113.20

# Using deleted all OSPF processes from the device

# Before state:
# ------------
# nxos-9k-rdo# sh running-config | section "^router ospf .*"
# router ospf 100
#   router-id 203.0.113.20
# router ospf 102
#   router-id 198.51.100.1
#   redistribute direct route-map ospf102-direct-connect
#   redistribute eigrp 120 route-map rmap_1
#   area 0.0.0.100 filter-list route-map rmap_2 out
#   area 0.0.0.100 filter-list route-map rmap_1 in
#   area 0.0.0.100 range 198.51.100.64/27 not-advertise
#   area 0.0.0.100 range 198.51.100.96/27 cost 120
#   area 0.0.0.101 authentication message-digest
#   vrf zone1
#     router-id 198.51.100.129
#     area 0.0.0.102 nssa no-summary default-information-originate
#     area 0.0.0.103 nssa no-summary
#     area 0.0.0.103 nssa translate type7 always
#     redistribute static route-map zone1-static-connect
#     summary-address 198.51.100.128/27 tag 121
#     summary-address 198.51.100.160/27
#   vrf zone2
#     auto-cost reference-bandwidth 45 Gbps

- name: Delete all OSPF processes from the device
  cisco.nxos.nxos_ospfv2:
    state: deleted

# Task output
# -------------
# before:
#    processes:
#    - process_id: "100"
#      router_id: 203.0.113.20
#    - areas:
#      - area_id: 0.0.0.100
#        filter_list:
#        - direction: out
#          route_map: rmap_2
#        - direction: in
#          route_map: rmap_1
#        ranges:
#        - not_advertise: true
#          prefix: 198.51.100.64/27
#        - cost: 120
#          prefix: 198.51.100.96/27
#      - area_id: 0.0.0.101
#        authentication:
#          message_digest: true
#      process_id: "102"
#      redistribute:
#      - protocol: direct
#        route_map: ospf102-direct-connect
#      - id: "120"
#        protocol: eigrp
#        route_map: rmap_1
#      router_id: 198.51.100.1
#      vrfs:
#      - areas:
#        - area_id: 0.0.0.102
#          nssa:
#            default_information_originate: true
#            no_summary: true
#        - area_id: 0.0.0.103
#          nssa:
#            no_summary: true
#            translate:
#              type7:
#                always: true
#        redistribute:
#        - protocol: static
#          route_map: zone1-static-connect
#        router_id: 198.51.100.129
#        vrf: zone1
#      - auto_cost:
#          reference_bandwidth: 45
#          unit: Gbps
#        vrf: zone2
#
# commands:
#  - no router ospf 100
#  - no router ospf 102
#
#  after: {}

# After state:
# ------------
# nxos-9k-rdo# sh running-config | section "^router ospf .*"
# nxos-9k-rdo#

# Using rendered

- name: Render platform specific configuration lines (without connecting to the device)
  cisco.nxos.nxos_ospfv2:
    config:
      processes:
      - process_id: 100
        router_id: 203.0.113.20
      - process_id: 102
        router_id: 198.51.100.1
        areas:
        - area_id: 0.0.0.100
          filter_list:
          - route_map: rmap_1
            direction: in
          - route_map: rmap_2
            direction: out
          ranges:
          - prefix: 198.51.100.64/27
            not_advertise: true
          - prefix: 198.51.100.96/27
            cost: 120
        - area_id: 0.0.0.101
          authentication:
            message_digest: true
        redistribute:
        - protocol: eigrp
          id: 120
          route_map: rmap_1
        - protocol: direct
          route_map: ospf102-direct-connect
        vrfs:
        - vrf: zone1
          router_id: 198.51.100.129
          redistribute:
          - protocol: static
            route_map: zone1-static-connect
          summary_address:
          - prefix: 198.51.100.128/27
            tag: 121
          - prefix: 198.51.100.160/27
          areas:
          - area_id: 0.0.0.102
            nssa:
              default_information_originate: true
              no_summary: true
          - area_id: 0.0.0.103
            nssa:
              no_summary: true
              translate:
                type7:
                  always: true
        - vrf: zone2
          auto_cost:
            reference_bandwidth: 45
            unit: Gbps
    state: rendered

# Task Output (redacted)
# -----------------------
# rendered:
#  - router ospf 100
#  - router-id 203.0.113.20
#  - router ospf 102
#  - router-id 198.51.100.1
#  - redistribute eigrp 120 route-map rmap_1
#  - redistribute direct route-map ospf102-direct-connect
#  - area 0.0.0.100 filter-list route-map rmap_1 in
#  - area 0.0.0.100 filter-list route-map rmap_2 out
#  - area 0.0.0.100 range 198.51.100.64/27 not-advertise
#  - area 0.0.0.100 range 198.51.100.96/27 cost 120
#  - area 0.0.0.101 authentication message-digest
#  - vrf zone1
#  - router-id 198.51.100.129
#  - summary-address 198.51.100.128/27 tag 121
#  - summary-address 198.51.100.160/27
#  - redistribute static route-map zone1-static-connect
#  - area 0.0.0.102 nssa no-summary default-information-originate
#  - area 0.0.0.103 nssa no-summary
#  - area 0.0.0.103 nssa translate type7 always
#  - vrf zone2
#  - auto-cost reference-bandwidth 45 Gbps

# Using parsed

# parsed.cfg
# ------------
# router ospf 100
#   router-id 192.0.100.1
#   area 0.0.0.101 nssa no-summary no-redistribution
#   area 0.0.0.102 stub no-summary
#   redistribute direct route-map ospf-direct-connect
#   redistribute eigrp 120 route-map rmap_1
#   area 0.0.0.100 filter-list route-map rmap_2 out
#   area 0.0.0.100 filter-list route-map rmap_1 in
#   area 0.0.0.100 range 192.0.2.0/24 not-advertise
#   area 0.0.0.100 range 192.0.3.0/24 cost 120
#   area 0.0.0.100 authentication message-digest
#   vrf zone1
#     router-id 192.0.100.2
#     area 0.0.100.1 nssa no-summary no-redistribution
#     redistribute static route-map zone1-direct-connect
#     summary-address 10.0.0.0/24 tag 120
#     summary-address 11.0.0.0/24 not-advertise
#   vrf zone2
#     auto-cost reference-bandwidth 45 Gbps
#     down-bit-ignore
#     capability vrf-lite evpn
#     shutdown
# router ospf 102
#   router-id 198.54.100.1
#   shutdown
#   vrf zone2
#     summary-address 192.0.8.0/24 tag 120
#   vrf zone4
#     shutdown

- name: Parse externally provided OSPFv2 config
  cisco.nxos.nxos_ospfv2:
    running_config: "{{ lookup('file', 'ospfv2.cfg') }}"
    state: parsed

# Task output (redacted)
# -----------------------
# parsed:
#   processes:
#   - process_id: "100"
#     areas:
#       - area_id: 0.0.0.101
#         nssa:
#           no_redistribution: true
#           no_summary: true
#       - area_id: 0.0.0.102
#         stub:
#           no_summary: true
#       - area_id: 0.0.0.100
#         authentication:
#           message_digest: true
#         filter_list:
#           - direction: out
#             route_map: rmap_2
#           - direction: in
#             route_map: rmap_1
#         ranges:
#           - not_advertise: true
#             prefix: 192.0.2.0/24
#           - cost: 120
#             prefix: 192.0.3.0/24
#     redistribute:
#       - protocol: direct
#         route_map: ospf-direct-connect
#       - id: "120"
#         protocol: eigrp
#         route_map: rmap_1
#     router_id: 192.0.100.1
#     vrfs:
#       - vrf: zone1
#         areas:
#           - area_id: 0.0.100.1
#             nssa:
#               no_redistribution: true
#               no_summary: true
#         redistribute:
#           - protocol: static
#             route_map: zone1-direct-connect
#         router_id: 192.0.100.2
#         summary_address:
#           - prefix: 10.0.0.0/24
#             tag: 120
#           - not_advertise: true
#             prefix: 11.0.0.0/24
#       - vrf: zone2
#         auto_cost:
#           reference_bandwidth: 45
#           unit: Gbps
#         capability:
#           vrf_lite:
#             evpn: true
#         down_bit_ignore: true
#         shutdown: true
#   - process_id: "102"
#     router_id: 198.54.100.1
#     shutdown: true
#     vrfs:
#       - vrf: zone2
#         summary_address:
#           - prefix: 192.0.8.0/24
#             tag: 120
#       - vrf: zone4
#         shutdown: true

# Using gathered

- name: Gather OSPFv2 facts using gathered
  cisco.nxos.nxos_ospfv2:
    state: gathered

# Task output (redacted)
# -----------------------
#  gathered:
#    processes:
#      - process_id: "102"
#        areas:
#          - area_id: 0.0.0.101
#            stub:
#              no_summary: true
#          - area_id: 0.0.0.100
#            filter_list:
#              - direction: in
#                route_map: rmap_8
#            ranges:
#              - not_advertise: true
#                prefix: 198.51.100.64/27
#        redistribute:
#          - protocol: direct
#            route_map: ospf102-direct-connect
#          - id: "130"
#            protocol: eigrp
#            route_map: rmap_1
#        router_id: 198.51.100.1
#        vrfs:
#          - vrf: zone1
#            areas:
#              - area_id: 0.0.0.102
#                nssa:
#                  default_information_originate: true
#                  no_summary: true
#            redistribute:
#             - id: "65563"
#               protocol: bgp
#               route_map: zone1-bgp-connect
#            router_id: 198.51.100.129
#

Возвращаемые значения

Общие возвращаемые значения описаны здесь, следующие поля уникальны для этого модуля:

Авторы

• Nilashish Chakraborty (@NilashishC)