junipernetworks.junos.junos_bgp_global – Управляет глобальной конфигурацией BGP на устройствах, работающих под управлением Juniper JUNOS.

• Обзор
• Требования
• Параметры
• Примечания
• Примеры
• Возвращаемые значения

Обзор

• Этот модуль управляет глобальной конфигурацией bgp на устройствах, работающих под управлением Juniper JUNOS.

Требования

Ниже перечислены требования, необходимые на хосте, на котором выполняется этот модуль.

• ncclient (>=v0.6.4)
• xmltodict (>=0.12.0)

Параметры

Примечания

Примеры

# Using merged
#
# Before state
# ------------
#
# admin# show protocols bgp

- name: Merge Junos BGP interfaces config
  junipernetworks.junos.junos_bgp_global:
    config:
      accept_remote_nexthop: true
      add_path_display_ipv4_address: true
      advertise_bgp_static:
        policy: "static-to-bgp"
      advertise_from_main_vpn_tables: true
      advertise_inactive: true
      authentication_algorithm: "md5"
      bgp_error_tolerance:
        malformed_route_limit: 20000000
      bmp:
        monitor: true
      damping: true
      description: "This is configured with Junos_bgp resource module"
      egress_te_sid_stats: true
      hold_time: 5
      holddown_all_stale_labels: true
      include_mp_next_hop: true
      log_updown: true
      no_advertise_peer_as: true
      no_aggregator_id: true
      no_client_reflect: true
      out_delay: 10
      precision_timers: true
      preference: 2
    state: merged

# After state
# -----------
#
# admin# show protocols bgp
# precision-timers;
# advertise-from-main-vpn-tables;
# holddown-all-stale-labels;
# description "This is configured with Junos_bgp resource module";
# accept-remote-nexthop;
# preference 2;
# hold-time 5;
# advertise-inactive;
# no-advertise-peer-as;
# no-aggregator-id;
# out-delay 10;
# log-updown;
# damping;
# bgp-error-tolerance {
#     malformed-route-limit 20000000;
# }
# authentication-algorithm md5;
# no-client-reflect;
# include-mp-next-hop;
# bmp {
#     monitor enable;
# }
# advertise-bgp-static {
#     policy static-to-bgp;
# }
# add-path-display-ipv4-address;
# egress-te-sid-stats;


# Using replaced
#
# Before state
# ------------
#
# admin# show protocols bgp
# precision-timers;
# advertise-from-main-vpn-tables;
# holddown-all-stale-labels;
# description "This is configured with Junos_bgp resource module";
# accept-remote-nexthop;
# preference 2;
# hold-time 5;
# advertise-inactive;
# no-advertise-peer-as;
# no-aggregator-id;
# out-delay 10;
# log-updown;
# damping;
# bgp-error-tolerance {
#     malformed-route-limit 20000000;
# }
# authentication-algorithm md5;
# no-client-reflect;
# include-mp-next-hop;
# bmp {
#     monitor enable;
# }
# advertise-bgp-static {
#     policy static-to-bgp;
# }
# add-path-display-ipv4-address;
# egress-te-sid-stats;

- name: Replace Junos BGP global config
  junipernetworks.junos.junos_bgp_global:
   config:
     advertise_bgp_static:
       policy: "static-to-bgp"
     advertise_inactive: true
     authentication_algorithm: "md5"
     bfd_liveness_detection:
       minimum_receive_interval: 8
       multiplier: 30
       no_adaptation: true
       transmit_interval:
         minimum_interval: 4
       version: "automatic"
     bgp_error_tolerance:
       malformed_route_limit: 40000000
     description: "This is configured with Junos_bgp resource module replace"
     egress_te_sid_stats: true
     hold_time: 5
     out_delay: 10
     preference: "2"
   state: replaced

# After state
# -----------
#
# admin# show protocols bgp
# description "This is configured with Junos_bgp resource module replace";
# preference 2;
# hold-time 5;
# advertise-inactive;
# out-delay 10;
# bgp-error-tolerance {
#     malformed-route-limit 40000000;
# }
# authentication-algorithm md5;
# advertise-bgp-static {
#     policy static-to-bgp;
# }
# bfd-liveness-detection {
#     version automatic;
#     minimum-receive-interval 8;
#     multiplier 30;
#     no-adaptation;
#     transmit-interval {
#         minimum-interval 4;
#     }
# }
# egress-te-sid-stats;


#
# Using deleted
#
# Before state
# ------------
#
# admin# show protocols bgp
# description "This is configured with Junos_bgp resource module replace";
# preference 2;
# hold-time 5;
# advertise-inactive;
# out-delay 10;
# bgp-error-tolerance {
#     malformed-route-limit 40000000;
# }
# authentication-algorithm md5;
# advertise-bgp-static {
#     policy static-to-bgp;
# }
# bfd-liveness-detection {
#     version automatic;
#     minimum-receive-interval 8;
#     multiplier 30;
#     no-adaptation;
#     transmit-interval {
#         minimum-interval 4;
#     }
# }
# egress-te-sid-stats;

- name: Delete Junos BGP global config
  junipernetworks.junos.junos_bgp_global:
    config:
    state: deleted

# After state
# -----------


# admin# show protocols bgp
# Using gathered
#
# Before state
# ------------
#
# admin# show protocols bgp
# description "This is configured with Junos_bgp resource module replace";
# preference 2;
# hold-time 5;
# advertise-inactive;
# out-delay 10;
# bgp-error-tolerance {
#     malformed-route-limit 40000000;
# }
# authentication-algorithm md5;
# advertise-bgp-static {
#     policy static-to-bgp;
# }
# bfd-liveness-detection {
#     version automatic;
#     minimum-receive-interval 8;
#     multiplier 30;
#     no-adaptation;
#     transmit-interval {
#         minimum-interval 4;
#     }
# }
# egress-te-sid-stats;

- name: Gather Junos BGP global config
  junipernetworks.junos.junos_bgp_global:
    config:
    state: gathered
#
#
# -------------------------
# Module Execution Result
# -------------------------
#
#    "gathered": {
#         "advertise_bgp_static": {
#             "policy": "static-to-bgp"
#         },
#         "advertise_inactive": true,
#         "authentication_algorithm": "md5",
#         "bfd_liveness_detection": {
#             "minimum_receive_interval": 8,
#             "multiplier": 30,
#             "no_adaptation": true,
#             "transmit_interval": {
#                 "minimum_interval": 4
#             },
#             "version": "automatic"
#         },
#         "bgp_error_tolerance": {
#             "malformed_route_limit": 40000000
#         },
#         "description": "This is configured with Junos_bgp resource module replace",
#         "egress_te_sid_stats": true,
#         "hold_time": 5,
#         "out_delay": 10,
#         "preference": "2"
#     }
#

#
# Using purged
#
# Before state
# ------------
#
# admin# show protocols bgp
# description "This is configured with Junos_bgp resource module replace";
# preference 2;
# hold-time 5;
# advertise-inactive;
# out-delay 10;
# bgp-error-tolerance {
#     malformed-route-limit 40000000;
# }
# authentication-algorithm md5;
# advertise-bgp-static {
#     policy static-to-bgp;
# }
# bfd-liveness-detection {
#     version automatic;
#     minimum-receive-interval 8;
#     multiplier 30;
#     no-adaptation;
#     transmit-interval {
#         minimum-interval 4;
#     }
# }
# egress-te-sid-stats;

- name: Purge Junos BGP global config
  junipernetworks.junos.junos_bgp_global:
    config:
    state: purged

# After state
# ----------

# Using rendered
#
#
- name: Render the commands for provided  configuration
  junipernetworks.junos.junos_bgp_global:
    config:
      authentication_algorithm: "md5"
      bfd_liveness_detection:
        minimum_receive_interval: 4
        multiplier: 10
        no_adaptation: true
        transmit_interval:
          minimum_interval: 2
        version: "automatic"
      bgp_error_tolerance:
        malformed_route_limit: 20000000
      bmp:
        monitor: true
      damping: true
      description: "This is configured with Junos_bgp resource module"
      egress_te_sid_stats: true
      hold_time: 5
    state: rendered

#
#
# -------------------------
# Module Execution Result
# -------------------------
#
#
# "rendered": "
# <nc:protocols
#     xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0">
#     <nc:bgp>
#         <nc:damping/>
#         <nc:egress-te-sid-stats/>
#         <nc:authentication-algorithm>md5</nc:authentication-algorithm>
#         <nc:description>This is configured with Junos_bgp resource module</nc:description>
#         <nc:hold-time>5</nc:hold-time>
#         <nc:bfd-liveness-detection>
#             <nc:transmit-interval>
#                 <nc:minimum-interval>2</nc:minimum-interval>
#             </nc:transmit-interval>
#             <nc:minimum-receive-interval>4</nc:minimum-receive-interval>
#             <nc:multiplier>10</nc:multiplier>
#             <nc:no-adaptation/>
#             <nc:version>automatic</nc:version>
#         </nc:bfd-liveness-detection>
#         <nc:bgp-error-tolerance>
#             <nc:malformed-route-limit>20000000</nc:malformed-route-limit>
#         </nc:bgp-error-tolerance>
#         <nc:bmp>
#             <nc:monitor>enable</nc:monitor>
#         </nc:bmp>
#     </nc:bgp>
# </nc:protocols>"
#
# Using parsed
# parsed.cfg
# ------------
# <?xml version="1.0" encoding="UTF-8"?>
# <rpc-reply message-id="urn:uuid:0cadb4e8-5bba-47f4-986e-72906227007f">
#    <configuration changed-seconds="1590139550" changed-localtime="2020-05-22 09:25:50 UTC">
#       <version>18.4R1-S2.4</version>
#       <protocols>
#          <bgp>
#             <precision-timers />
#             <advertise-from-main-vpn-tables />
#             <holddown-all-stale-labels />
#             <description>This is configured with Junos_bgp resource module</description>
#             <accept-remote-nexthop />
#             <preference>2</preference>
#             <hold-time>5</hold-time>
#             <advertise-inactive />
#             <no-advertise-peer-as />
#             <no-aggregator-id />
#             <out-delay>10</out-delay>
#             <log-updown />
#             <damping />
#             <bgp-error-tolerance>
#                <malformed-route-limit>20000000</malformed-route-limit>
#             </bgp-error-tolerance>
#             <authentication-algorithm>md5</authentication-algorithm>
#             <remove-private />
#             <no-client-reflect />
#             <include-mp-next-hop />
#             <bmp>
#                <monitor>disable</monitor>
#                <route-monitoring>
#                   <none />
#                </route-monitoring>
#             </bmp>
#             <advertise-bgp-static>
#                <policy>static-to-bgp</policy>
#             </advertise-bgp-static>
#             <add-path-display-ipv4-address />
#             <bfd-liveness-detection>
#                <version>automatic</version>
#                <minimum-receive-interval>4</minimum-receive-interval>
#                <multiplier>10</multiplier>
#                <no-adaptation />
#                <transmit-interval>
#                   <minimum-interval>2</minimum-interval>
#                </transmit-interval>
#                <detection-time>
#                   <threshold>300000</threshold>
#                </detection-time>
#             </bfd-liveness-detection>
#             <egress-te-sid-stats />
#             <group>
#                <name>internal</name>
#                <out-delay>8</out-delay>
#             </group>
#             <group>
#                <name>external</name>
#                <out-delay>9</out-delay>
#             </group>
#             <group>
#                <name>inboun</name>
#                <type>internal</type>
#             </group>
#             <group>
#                <name>ibgp</name>
#                <type>internal</type>
#                <local-address>10.2.2.2</local-address>
#                <export>static-to-bgp</export>
#                <neighbor>
#                   <name>10.1.1.1</name>
#                </neighbor>
#             </group>
#          </bgp>
#          <ospf3>
#             <area>
#                <name>0.0.0.100</name>
#                <stub>
#                   <default-metric>200</default-metric>
#                </stub>
#                <interface>
#                   <name>so-0/0/0.0</name>
#                   <metric>5</metric>
#                   <priority>3</priority>
#                </interface>
#             </area>
#          </ospf3>
#       </protocols>
#       <routing-options>
#          <static>
#             <route>
#                <name>172.16.17.0/24</name>
#                <discard />
#             </route>
#          </static>
#          <router-id>10.200.16.75</router-id>
#          <autonomous-system>
#             <as-number>65432</as-number>
#          </autonomous-system>
#       </routing-options>
#    </configuration>
# </rpc-reply>


- name: Parsed the device configuration to get output commands
  junipernetworks.junos.junos_bgp_global:
    running_config: "{{ lookup('file', './parsed.cfg') }}"
    state: parsed
#
#
# -------------------------
# Module Execution Result
# -------------------------
#
#
# "parsed":  {
#         "accept_remote_nexthop": true,
#         "add_path_display_ipv4_address": true,
#         "advertise_bgp_static": {
#             "policy": "static-to-bgp"
#         },
#         "advertise_from_main_vpn_tables": true,
#         "advertise_inactive": true,
#         "authentication_algorithm": "md5",
#         "bfd_liveness_detection": {
#             "detection_time": {
#                 "threshold": 300000
#             },
#             "minimum_receive_interval": 4,
#             "multiplier": 10,
#             "no_adaptation": true,
#             "transmit_interval": {
#                 "minimum_interval": 2
#             },
#             "version": "automatic"
#         },
#         "bgp_error_tolerance": {
#             "malformed_route_limit": 20000000
#         },
#         "bmp": {
#             "monitor": false,
#             "route_monitoring": {
#                 "none": true
#             }
#         },
#         "damping": true,
#         "description": "This is configured with Junos_bgp resource module",
#         "egress_te_sid_stats": true,
#         "hold_time": 5,
#         "holddown_all_stale_labels": true,
#         "include_mp_next_hop": true,
#         "log_updown": true,
#         "no_advertise_peer_as": true,
#         "no_aggregator_id": true,
#         "no_client_reflect": true,
#         "out_delay": 10,
#         "precision_timers": true,
#         "preference": "2"
#     }
#

Значения возврата

Общие значения возврата описаны здесь, ниже перечислены поля, уникальные для этого модуля:

Авторы

• Rohit Thakur (@rohitthakur)