vsphere_guest — Создание/удаление/управление гостевой VM через VMware vSphere.

• УСТЕРЕЛО
• Описание
  • Требования
• Параметры
• Примечания
• Примеры
• Статус
  • Автор

УСТЕРЕЛО

Описание

• Создание/удаление/переконфигурация гостевой VM через VMware vSphere. Этот модуль зависит от pysphere >= 1.7

Требования

Ниже перечислены требования к хосту, на котором выполняется этот модуль.

• python >= 2.6
• pysphere

Параметры

Примечания

Примеры

---
# Create a new VM on an ESX server
# Returns changed = False when the VM already exists
# Returns changed = True and a adds ansible_facts from the new VM
# State will set the power status of a guest upon creation. Use powered_on to create and boot.
# Options ['state', 'vm_extra_config', 'vm_disk', 'vm_nic', 'vm_hardware', 'esxi'] are required together
# Note: vm_floppy support added in 2.0

- vsphere_guest:
    vcenter_hostname: vcenter.mydomain.local
    username: myuser
    password: mypass
    guest: newvm001
    state: powered_on
    vm_extra_config:
      vcpu.hotadd: yes
      mem.hotadd:  yes
      notes: This is a test VM
      folder: MyFolder
    vm_disk:
      disk1:
        size_gb: 10
        type: thin
        datastore: storage001
        # VMs can be put into folders. The value given here is either the full path
        # to the folder (e.g. production/customerA/lamp) or just the last component
        # of the path (e.g. lamp):
        folder: production/customerA/lamp
    vm_nic:
      nic1:
        type: vmxnet3
        network: VM Network
        network_type: standard
      nic2:
        type: vmxnet3
        network: dvSwitch Network
        network_type: dvs
    vm_hardware:
      memory_mb: 2048
      num_cpus: 2
      osid: centos64Guest
      scsi: paravirtual
      vm_cdrom:
        type: "iso"
        iso_path: "DatastoreName/cd-image.iso"
      vm_floppy:
        type: "image"
        image_path: "DatastoreName/floppy-image.flp"
    esxi:
      datacenter: MyDatacenter
      hostname: esx001.mydomain.local

# Reconfigure the CPU and Memory on the newly created VM
# Will return the changes made

- vsphere_guest:
    vcenter_hostname: vcenter.mydomain.local
    username: myuser
    password: mypass
    guest: newvm001
    state: reconfigured
    vm_extra_config:
      vcpu.hotadd: yes
      mem.hotadd:  yes
      notes: This is a test VM
    vm_disk:
      disk1:
        size_gb: 10
        type: thin
        datastore: storage001
    vm_nic:
      nic1:
        type: vmxnet3
        network: VM Network
        network_type: standard
    vm_hardware:
      memory_mb: 4096
      num_cpus: 4
      osid: centos64Guest
      scsi: paravirtual
    esxi:
      datacenter: MyDatacenter
      hostname: esx001.mydomain.local

# Deploy a guest from a template
- vsphere_guest:
    vcenter_hostname: vcenter.mydomain.local
    username: myuser
    password: mypass
    guest: newvm001
    from_template: yes
    template_src: centosTemplate
    cluster: MainCluster
    resource_pool: "/Resources"
    vm_extra_config:
      folder: MyFolder

# Task to gather facts from a vSphere cluster only if the system is a VMware guest

- vsphere_guest:
    vcenter_hostname: vcenter.mydomain.local
    username: myuser
    password: mypass
    guest: newvm001
    vmware_guest_facts: yes

---
# Typical output of a vsphere_facts run on a guest
# If vmware tools is not installed, ipadresses with return None

- hw_eth0:
  - addresstype: "assigned"
    label: "Network adapter 1"
    macaddress: "00:22:33:33:44:55"
    macaddress_dash: "00-22-33-33-44-55"
    ipaddresses: ['192.0.2.100', '2001:DB8:56ff:feac:4d8a']
    summary: "VM Network"
  hw_guest_full_name: "newvm001"
  hw_guest_id: "rhel6_64Guest"
  hw_memtotal_mb: 2048
  hw_name: "centos64Guest"
  hw_power_status: "POWERED ON"
  hw_processor_count: 2
  hw_product_uuid: "ef50bac8-2845-40ff-81d9-675315501dac"

# hw_power_status will be one of the following values:
#   - POWERED ON
#   - POWERED OFF
#   - SUSPENDED
#   - POWERING ON
#   - POWERING OFF
#   - SUSPENDING
#   - RESETTING
#   - BLOCKED ON MSG
#   - REVERTING TO SNAPSHOT
#   - UNKNOWN
# as seen in the VMPowerState-Class of PySphere: http://git.io/vlwOq

---
# Remove a vm from vSphere
# The VM must be powered_off or you need to use force to force a shutdown
- vsphere_guest:
    vcenter_hostname: vcenter.mydomain.local
    username: myuser
    password: mypass
    guest: newvm001
    state: absent
    force: yes

Статус

Этот модуль помечен как устаревший и будет удалён в версии 2.9. Для получения дополнительной информации см. УСТЕРЕЛО.

Автор

• Richard Hoop (@rhoop) <wrhoop@gmail.com>