ovirt_vm – Модуль для управления виртуальными машинами в oVirt/RHV

• Обзор
• Требования
• Параметры
• Примечания
• Примеры
• Возвращаемые значения
• Статус

Обзор

• Этот модуль управляет всем жизненным циклом виртуальной машины (VM) в oVirt/RHV.
• Так как VM может находиться во многих состояниях в oVirt/RHV, см. примечания, чтобы узнать, как обрабатываются состояния VM.

Требования

Ниже перечислены требования к хосту, на котором выполняется этот модуль.

• python >= 2.7
• ovirt-engine-sdk-python >= 4.3.0

Параметры

Примечания

Примеры

# Examples don't contain auth parameter for simplicity,
# look at ovirt_auth module to see how to reuse authentication:

- name: Creates a new Virtual Machine from template named 'rhel7_template'
  ovirt_vm:
    state: present
    name: myvm
    template: rhel7_template
    cluster: mycluster

- name: Register VM
  ovirt_vm:
    state: registered
    storage_domain: mystorage
    cluster: mycluster
    name: myvm

- name: Register VM using id
  ovirt_vm:
    state: registered
    storage_domain: mystorage
    cluster: mycluster
    id: 1111-1111-1111-1111

- name: Register VM, allowing partial import
  ovirt_vm:
    state: registered
    storage_domain: mystorage
    allow_partial_import: "True"
    cluster: mycluster
    id: 1111-1111-1111-1111

- name: Register VM with vnic profile mappings and reassign bad macs
  ovirt_vm:
    state: registered
    storage_domain: mystorage
    cluster: mycluster
    id: 1111-1111-1111-1111
    vnic_profile_mappings:
    - source_network_name: mynetwork
      source_profile_name: mynetwork
      target_profile_id: 3333-3333-3333-3333
    - source_network_name: mynetwork2
      source_profile_name: mynetwork2
      target_profile_id: 4444-4444-4444-4444
    reassign_bad_macs: "True"

- name: Register VM with mappings
  ovirt_vm:
    state: registered
    storage_domain: mystorage
    cluster: mycluster
    id: 1111-1111-1111-1111
    role_mappings:
      - source_name: Role_A
        dest_name: Role_B
    domain_mappings:
      - source_name: Domain_A
        dest_name: Domain_B
    lun_mappings:
      - source_storage_type: iscsi
        source_logical_unit_id: 1IET_000d0001
        source_logical_unit_port: 3260
        source_logical_unit_portal: 1
        source_logical_unit_address: 10.34.63.203
        source_logical_unit_target: iqn.2016-08-09.brq.str-01:omachace
        dest_storage_type: iscsi
        dest_logical_unit_id: 1IET_000d0002
        dest_logical_unit_port: 3260
        dest_logical_unit_portal: 1
        dest_logical_unit_address: 10.34.63.204
        dest_logical_unit_target: iqn.2016-08-09.brq.str-02:omachace
    affinity_group_mappings:
      - source_name: Affinity_A
        dest_name: Affinity_B
    affinity_label_mappings:
      - source_name: Label_A
        dest_name: Label_B
    cluster_mappings:
      - source_name: cluster_A
        dest_name: cluster_B

- name: Creates a stateless VM which will always use latest template version
  ovirt_vm:
    name: myvm
    template: rhel7
    cluster: mycluster
    use_latest_template_version: true

# Creates a new server rhel7 Virtual Machine from Blank template
# on brq01 cluster with 2GiB memory and 2 vcpu cores/sockets
# and attach bootable disk with name rhel7_disk and attach virtio NIC
- ovirt_vm:
    state: present
    cluster: brq01
    name: myvm
    memory: 2GiB
    cpu_cores: 2
    cpu_sockets: 2
    cpu_shares: 1024
    type: server
    operating_system: rhel_7x64
    disks:
      - name: rhel7_disk
        bootable: True
    nics:
      - name: nic1

# Change VM Name
- ovirt_vm:
    id: 00000000-0000-0000-0000-000000000000
    name: "new_vm_name"

- name: Run VM with cloud init
  ovirt_vm:
    name: rhel7
    template: rhel7
    cluster: Default
    memory: 1GiB
    high_availability: true
    high_availability_priority: 50  # Available from Ansible 2.5
    cloud_init:
      nic_boot_protocol: static
      nic_ip_address: 10.34.60.86
      nic_netmask: 255.255.252.0
      nic_gateway: 10.34.63.254
      nic_name: eth1
      nic_on_boot: true
      host_name: example.com
      custom_script: |
        write_files:
         - content: |
             Hello, world!
           path: /tmp/greeting.txt
           permissions: '0644'
      user_name: root
      root_password: super_password

- name: Run VM with cloud init, with multiple network interfaces
  ovirt_vm:
    name: rhel7_4
    template: rhel7
    cluster: mycluster
    cloud_init_nics:
    - nic_name: eth0
      nic_boot_protocol: dhcp
      nic_on_boot: true
    - nic_name: eth1
      nic_boot_protocol: static
      nic_ip_address: 10.34.60.86
      nic_netmask: 255.255.252.0
      nic_gateway: 10.34.63.254
      nic_on_boot: true

- name: Run VM with sysprep
  ovirt_vm:
    name: windows2012R2_AD
    template: windows2012R2
    cluster: Default
    memory: 3GiB
    high_availability: true
    sysprep:
      host_name: windowsad.example.com
      user_name: Administrator
      root_password: SuperPassword123

- name: Migrate/Run VM to/on host named 'host1'
  ovirt_vm:
    state: running
    name: myvm
    host: host1

- name: Migrate VM to any available host
  ovirt_vm:
    state: running
    name: myvm
    migrate: true

- name: Change VMs CD
  ovirt_vm:
    name: myvm
    cd_iso: drivers.iso

- name: Eject VMs CD
  ovirt_vm:
    name: myvm
    cd_iso: ''

- name: Boot VM from CD
  ovirt_vm:
    name: myvm
    cd_iso: centos7_x64.iso
    boot_devices:
        - cdrom

- name: Stop vm
  ovirt_vm:
    state: stopped
    name: myvm

- name: Upgrade memory to already created VM
  ovirt_vm:
    name: myvm
    memory: 4GiB

- name: Hot plug memory to already created and running VM (VM won't be restarted)
  ovirt_vm:
    name: myvm
    memory: 4GiB

# Create/update a VM to run with two vNUMA nodes and pin them to physical NUMA nodes as follows:
# vnuma index 0-> numa index 0, vnuma index 1-> numa index 1
- name: Create a VM to run with two vNUMA nodes
  ovirt_vm:
    name: myvm
    cluster: mycluster
    numa_tune_mode: "interleave"
    numa_nodes:
    - index: 0
      cores: [0]
      memory: 20
      numa_node_pins: [0]
    - index: 1
      cores: [1]
      memory: 30
      numa_node_pins: [1]

- name: Update an existing VM to run without previously created vNUMA nodes (i.e. remove all vNUMA nodes+NUMA pinning setting)
  ovirt_vm:
    name: myvm
    cluster: mycluster
    state: "present"
    numa_tune_mode: "interleave"
    numa_nodes:
    - index: -1

# When change on the VM needs restart of the VM, use next_run state,
# The VM will be updated and rebooted if there are any changes.
# If present state would be used, VM won't be restarted.
- ovirt_vm:
    state: next_run
    name: myvm
    boot_devices:
      - network

- name: Import virtual machine from VMware
  ovirt_vm:
    state: stopped
    cluster: mycluster
    name: vmware_win10
    timeout: 1800
    poll_interval: 30
    vmware:
      url: vpx://user@1.2.3.4/Folder1/Cluster1/2.3.4.5?no_verify=1
      name: windows10
      storage_domain: mynfs
      username: user
      password: password

- name: Create vm from template and create all disks on specific storage domain
  ovirt_vm:
    name: vm_test
    cluster: mycluster
    template: mytemplate
    storage_domain: mynfs
    nics:
    - name: nic1

- name: Remove VM, if VM is running it will be stopped
  ovirt_vm:
    state: absent
    name: myvm

# Defining a specific quota for a VM:
# Since Ansible 2.5
- ovirt_quotas_facts:
    data_center: Default
    name: myquota
- ovirt_vm:
    name: myvm
    sso: False
    boot_menu: True
    usb_support: True
    serial_console: True
    quota_id: "{{ ovirt_quotas[0]['id'] }}"

- name: Create a VM that has the console configured for both Spice and VNC
  ovirt_vm:
    name: myvm
    template: mytemplate
    cluster: mycluster
    graphical_console:
      protocol:
        - spice
        - vnc

# Execute remote viewer to VM
- block:
  - name: Create a ticket for console for a running VM
    ovirt_vms:
      name: myvm
      ticket: true
      state: running
    register: myvm

  - name: Save ticket to file
    copy:
      content: "{{ myvm.vm.remote_vv_file }}"
      dest: ~/vvfile.vv

  - name: Run remote viewer with file
    command: remote-viewer ~/vvfile.vv

# Default value of host_device state is present
- name: Attach host devices to virtual machine
  ovirt_vm:
    name: myvm
    host: myhost
    placement_policy: pinned
    host_devices:
      - name: pci_0000_00_06_0
      - name: pci_0000_00_07_0
        state: absent
      - name: pci_0000_00_08_0
        state: present

- name: Export the VM as OVA
  ovirt_vm:
    name: myvm
    state: exported
    cluster: mycluster
    export_ova:
        host: myhost
        filename: myvm.ova
        directory: /tmp/

Значения возврата

Общие значения возвращаемых данных документированы здесь, ниже приведены поля, уникальные для данного модуля:

Статус

• Данный модуль не гарантирует обратную совместимость. [превью]
• Этот модуль поддерживается сообществом Ansible. поддерживается сообществом Ansible. [сообщество]

Авторы

• Ondra Machacek (@machacekondra)