Spec-Zone .ru
спецификации, руководства, описания, API


javax.faces.validator
Class LongRangeValidator

java.lang.Object
  extended by javax.faces.validator.LongRangeValidator
All Implemented Interfaces:
java.util.EventListener, PartialStateHolder, StateHolder, Validator

public class LongRangeValidator
extends java.lang.Object
implements Validator, PartialStateHolder

LongRangeValidator is a Validator that checks the value of the corresponding component against specified minimum and maximum values. The following algorithm is implemented:

For all of the above cases that cause a ValidatorException to be thrown, if there are parameters to the message that match up with validator parameters, the values of these parameters must be converted using the Converter registered in the application under the converter id javax.faces.Number. This allows the values to be localized according to the current Locale.


Field Summary
static java.lang.String MAXIMUM_MESSAGE_ID
          The message identifier of the FacesMessage to be created if the maximum value check fails.
static java.lang.String MINIMUM_MESSAGE_ID
          The message identifier of the FacesMessage to be created if the minimum value check fails.
static java.lang.String NOT_IN_RANGE_MESSAGE_ID
          The message identifier of the FacesMessage to be created if the maximum or minimum value check fails, and both the maximum and minimum values for this validator have been set.
static java.lang.String TYPE_MESSAGE_ID
          The message identifier of the FacesMessage to be created if the current value of this component is not of the correct type.
static java.lang.String VALIDATOR_ID
          The standard converter id for this converter.
 
Constructor Summary
LongRangeValidator()
          Construct a Validator with no preconfigured limits.
LongRangeValidator(long maximum)
          Construct a Validator with the specified preconfigured limit.
LongRangeValidator(long maximum, long minimum)
          Construct a Validator with the specified preconfigured limits.
 
Method Summary
 void clearInitialState()
          

Reset the PartialStateHolder to a non-delta tracking state.

 boolean equals(java.lang.Object otherObj)
           
 long getMaximum()
          Return the maximum value to be enforced by this Validator.
 long getMinimum()
          Return the minimum value to be enforced by this Validator.
 int hashCode()
           
 boolean initialStateMarked()
          

Return true if delta state changes are being tracked, otherwise false

 boolean isTransient()
          If true, the Object implementing this interface must not participate in state saving or restoring.
 void markInitialState()
          

The runtime must ensure that the PartialStateHolder.markInitialState() method is called on each instance of this interface in the view at the appropriate time to indicate the component is in its initial state.

 void restoreState(FacesContext context, java.lang.Object state)
          Perform any processing required to restore the state from the entries in the state Object.
 java.lang.Object saveState(FacesContext context)
           Gets the state of the instance as a Serializable Object.
 void setMaximum(long maximum)
          Set the maximum value to be enforced by this Validator.
 void setMinimum(long minimum)
          Set the minimum value to be enforced by this Validator.
 void setTransient(boolean transientValue)
          Denotes whether or not the Object implementing this interface must or must not participate in state saving or restoring.
 void validate(FacesContext context, UIComponent component, java.lang.Object value)
          Perform the correctness checks implemented by this Validator against the specified UIComponent.
 
Methods inherited from class java.lang.Object
clone, finalize, getClass, notify, notifyAll, toString, wait, wait, wait
 

Field Detail

VALIDATOR_ID

public static final java.lang.String VALIDATOR_ID

The standard converter id for this converter.

See Also:
Constant Field Values

MAXIMUM_MESSAGE_ID

public static final java.lang.String MAXIMUM_MESSAGE_ID

The message identifier of the FacesMessage to be created if the maximum value check fails. The message format string for this message may optionally include the following placeholders:

See Also:
Constant Field Values

MINIMUM_MESSAGE_ID

public static final java.lang.String MINIMUM_MESSAGE_ID

The message identifier of the FacesMessage to be created if the minimum value check fails. The message format string for this message may optionally include the following placeholders:

See Also:
Constant Field Values

NOT_IN_RANGE_MESSAGE_ID

public static final java.lang.String NOT_IN_RANGE_MESSAGE_ID

The message identifier of the FacesMessage to be created if the maximum or minimum value check fails, and both the maximum and minimum values for this validator have been set. The message format string for this message may optionally include the following placeholders:

See Also:
Constant Field Values

TYPE_MESSAGE_ID

public static final java.lang.String TYPE_MESSAGE_ID

The message identifier of the FacesMessage to be created if the current value of this component is not of the correct type. The message format string for this message may optionally include a {0} placeholder that will be replaced by a String whose value is the label of the input component that produced this message.

See Also:
Constant Field Values
Constructor Detail

LongRangeValidator

public LongRangeValidator()

Construct a Validator with no preconfigured limits.


LongRangeValidator

public LongRangeValidator(long maximum)

Construct a Validator with the specified preconfigured limit.

Parameters:
maximum - Maximum value to allow

LongRangeValidator

public LongRangeValidator(long maximum,
                          long minimum)

Construct a Validator with the specified preconfigured limits.

Parameters:
maximum - Maximum value to allow
minimum - Minimum value to allow
Method Detail

getMaximum

public long getMaximum()

Return the maximum value to be enforced by this Validator.


setMaximum

public void setMaximum(long maximum)

Set the maximum value to be enforced by this Validator.

Parameters:
maximum - The new maximum value

getMinimum

public long getMinimum()

Return the minimum value to be enforced by this Validator.


setMinimum

public void setMinimum(long minimum)

Set the minimum value to be enforced by this Validator.

Parameters:
minimum - The new minimum value

validate

public void validate(FacesContext context,
                     UIComponent component,
                     java.lang.Object value)
              throws ValidatorException
Description copied from interface: Validator

Perform the correctness checks implemented by this Validator against the specified UIComponent. If any violations are found, a ValidatorException will be thrown containing the FacesMessage describing the failure.

For a validator to be fully compliant with Version 2 and later of the specification, it must not fail validation on null or empty values unless it is specifically intended to address null or empty values. An application-wide <context-param> is provided to allow validators designed for JSF 1.2 to work with JSF 2 and later. The javax.faces.VALIDATE_EMPTY_FIELDS <context-param> must be set to false to enable this backwards compatibility behavior.

Specified by:
validate in interface Validator
Parameters:
context - FacesContext for the request we are processing
component - UIComponent we are checking for correctness
value - the value to validate
Throws:
java.lang.NullPointerException - if context or component is null
ValidatorException - if validation fails

equals

public boolean equals(java.lang.Object otherObj)
Overrides:
equals in class java.lang.Object

hashCode

public int hashCode()
Overrides:
hashCode in class java.lang.Object

saveState

public java.lang.Object saveState(FacesContext context)
Description copied from interface: StateHolder

Gets the state of the instance as a Serializable Object.

If the class that implements this interface has references to instances that implement StateHolder (such as a UIComponent with event handlers, validators, etc.) this method must call the StateHolder.saveState(javax.faces.context.FacesContext) method on all those instances as well. This method must not save the state of children and facets. That is done via the StateManager

This method must not alter the state of the implementing object. In other words, after executing this code:

 Object state = component.saveState(facesContext);
 

component should be the same as before executing it.

The return from this method must be Serializable

Specified by:
saveState in interface StateHolder

restoreState

public void restoreState(FacesContext context,
                         java.lang.Object state)
Description copied from interface: StateHolder

Perform any processing required to restore the state from the entries in the state Object.

If the class that implements this interface has references to instances that also implement StateHolder (such as a UIComponent with event handlers, validators, etc.) this method must call the StateHolder.restoreState(javax.faces.context.FacesContext, java.lang.Object) method on all those instances as well.

If the state argument is null, take no action and return.

Specified by:
restoreState in interface StateHolder

isTransient

public boolean isTransient()
Description copied from interface: StateHolder

If true, the Object implementing this interface must not participate in state saving or restoring.

Specified by:
isTransient in interface StateHolder

setTransient

public void setTransient(boolean transientValue)
Description copied from interface: StateHolder

Denotes whether or not the Object implementing this interface must or must not participate in state saving or restoring.

Specified by:
setTransient in interface StateHolder
Parameters:
transientValue - boolean pass true if this Object will not participate in state saving or restoring, otherwise pass false.

markInitialState

public void markInitialState()
Description copied from interface: PartialStateHolder

The runtime must ensure that the PartialStateHolder.markInitialState() method is called on each instance of this interface in the view at the appropriate time to indicate the component is in its initial state. The implementor of the interface must ensure that PartialStateHolder.initialStateMarked() returns true from the time markInitialState() is called until PartialStateHolder.clearInitialState() is called, after which time initialStateMarked() must return false. Also, during the time that the instance returns true from initialStateMarked(), the implementation must return only the state that has changed in its implementation of StateHolder#saveState.

Specified by:
markInitialState in interface PartialStateHolder

initialStateMarked

public boolean initialStateMarked()
Description copied from interface: PartialStateHolder

Return true if delta state changes are being tracked, otherwise false

Specified by:
initialStateMarked in interface PartialStateHolder

clearInitialState

public void clearInitialState()
Description copied from interface: PartialStateHolder

Reset the PartialStateHolder to a non-delta tracking state.

Specified by:
clearInitialState in interface PartialStateHolder


Submit a bug or feature

Copyright © 2009-2011, Oracle Corporation and/or its affiliates. All Rights Reserved. Use is subject to license terms.

Generated on 10-February-2011 12:41

free hit counter