TilePane (JavaFX 2.2)

java.lang.Object
- javafx.scene.Node
- - javafx.scene.Parent
  - - javafx.scene.layout.Region
    - - javafx.scene.layout.Pane
      - javafx.scene.layout.TilePane

All Implemented Interfaces:: EventTarget

public class TilePane
extends Pane

TilePane lays out its children in a grid of uniformly sized "tiles".

A horizontal tilepane (the default) will tile nodes in rows, wrapping at the tilepane's width. A vertical tilepane will tile nodes in columns, wrapping at the tilepane's height.

The size of each "tile" defaults to the size needed to encompass the largest preferred width and height of the tilepane's children and the tilepane will recompute the size of the tiles as needed to accommodate the largest preferred size of its children as it changes. The application may also control the size of the tiles directly by setting prefTileWidth/prefTileHeight properties to a value other than USE_COMPUTED_SIZE (the default).

Applications should initialize either prefColumns (for horizontal) or prefRows (for vertical) to establish the tilepane's preferred size (the arbitrary default is 5). Note that prefColumns/prefRows is used only for calculating the preferred size and may not reflect the actual number of rows or columns, which may change as the tilepane is resized and the tiles are wrapped at its actual boundaries.

The alignment property controls how the rows and columns are aligned within the bounds of the tilepane and defaults to Pos.TOP_LEFT. It is also possible to control the alignment of nodes within the individual tiles by setting tileAlignment, which defaults to Pos.CENTER.

A horizontal tilepane example:


    TilePane tile = new TilePane();
    tile.setHgap(8);
    tile.setPrefColumns(4);
    for (int i = 0; i < 20; i++) {
        tile.getChildren().add(new ImageView(...));
    }

A vertical TilePane example:


    TilePane tile = new TilePane(Orientation.VERTICAL);
    tile.setTileAlignment(Pos.CENTER_LEFT);
    tile.setPrefRows(10);
    for (int i = 0; i < 50; i++) {
        tile.getChildren().add(new ImageView(...));
    }

The TilePane will attempt to resize each child to fill its tile. If the child could not be sized to fill the tile (either because it was not resizable or its size limits prevented it) then it will be aligned within the tile using tileAlignment.

Resizable Range

A tilepane's parent will resize the tilepane within the tilepane's resizable range during layout. By default the tilepane computes this range based on its content as outlined in the tables below.

Horizontal:

	width	height
minimum	left/right insets plus the tile width.	top/bottom insets plus height required to display all tiles when wrapped at a specified width with a vgap between each row.
preferred	left/right insets plus prefColumns multiplied by the tile width.	top/bottom insets plus height required to display all tiles when wrapped at a specified width with a vgap between each row.
maximum	Double.MAX_VALUE	Double.MAX_VALUE

Vertical:

	width	height
minimum	left/right insets plus width required to display all tiles when wrapped at a specified height with an hgap between each column.	top/bottom insets plus the tile height.
preferred	left/right insets plus width required to display all tiles when wrapped at the specified height with an hgap between each column.	top/bottom insets plus prefRows multiplied by the tile height.
maximum	Double.MAX_VALUE	Double.MAX_VALUE

A tilepane's unbounded maximum width and height are an indication to the parent that it may be resized beyond its preferred size to fill whatever space is assigned to it.

TilePane provides properties for setting the size range directly. These properties default to the sentinel value Region.USE_COMPUTED_SIZE, however the application may set them to other values as needed:


     tilepane.setMaxWidth(500);

Applications may restore the computed values by setting these properties back to Region.USE_COMPUTED_SIZE.

TilePane does not clip its content by default, so it is possible that childrens' bounds may extend outside the tiles (and possibly the tilepane bounds) if a child's pref size prevents it from being fit within its tile. Also, if the tilepane is resized smaller than its preferred size, it may not be able to fit all the tiles within its bounds and the content will extend outside.

Optional Layout Constraints

An application may set constraints on individual children to customize TilePane's layout. For each constraint, TilePane provides a static method for setting it on the child.

Constraint	Type	Description
alignment	javafx.geometry.Pos	The alignment of the child within its tile.
margin	javafx.geometry.Insets	Margin space around the outside of the child.

Example:


     TilePane tilepane = new TilePane();
     for (int i = 0; i < 20; i++) {
        Label title = new Label(imageTitle[i]):
        Imageview imageview = new ImageView(new Image(imageName[i])); 
        TilePane.setAlignment(label, Pos.BOTTOM_RIGHT);
        tilepane.getChildren().addAll(title, imageview);
     }

Property Summary

Properties
Type	Property and Description
`ObjectProperty<Pos>`	`alignment` The overall alignment of the tilepane's content within its width and height.
`DoubleProperty`	`hgap` The amount of horizontal space between each tile in a row.
`ObjectProperty<Orientation>`	`orientation` The orientation of this tilepane.
`IntegerProperty`	`prefColumns` The preferred number of columns for a horizontal tilepane.
`IntegerProperty`	`prefRows` The preferred number of rows for a vertical tilepane.
`DoubleProperty`	`prefTileHeight` The preferred height of each tile.
`DoubleProperty`	`prefTileWidth` The preferred width of each tile.
`ObjectProperty<Pos>`	`tileAlignment` The default alignment of each child within its tile.
`ReadOnlyDoubleProperty`	`tileHeight` The actual height of each tile.
`ReadOnlyDoubleProperty`	`tileWidth` The actual width of each tile.
`DoubleProperty`	`vgap` The amount of vertical space between each tile in a column.

Properties inherited from class javafx.scene.layout.Region
height, maxHeight, maxWidth, minHeight, minWidth, padding, prefHeight, prefWidth, snapToPixel, width

Properties inherited from class javafx.scene.Parent
needsLayout

Properties inherited from class javafx.scene.Node
blendMode, boundsInLocal, boundsInParent, cacheHint, cache, clip, cursor, depthTest, disabled, disable, effect, eventDispatcher, focused, focusTraversable, hover, id, inputMethodRequests, layoutBounds, layoutX, layoutY, localToParentTransform, localToSceneTransform, managed, mouseTransparent, onContextMenuRequested, onDragDetected, onDragDone, onDragDropped, onDragEntered, onDragExited, onDragOver, onInputMethodTextChanged, onKeyPressed, onKeyReleased, onKeyTyped, onMouseClicked, onMouseDragEntered, onMouseDragExited, onMouseDragged, onMouseDragOver, onMouseDragReleased, onMouseEntered, onMouseExited, onMouseMoved, onMousePressed, onMouseReleased, onRotate, onRotationFinished, onRotationStarted, onScrollFinished, onScroll, onScrollStarted, onSwipeDown, onSwipeLeft, onSwipeRight, onSwipeUp, onTouchMoved, onTouchPressed, onTouchReleased, onTouchStationary, onZoomFinished, onZoom, onZoomStarted, opacity, parent, pickOnBounds, pressed, rotate, rotationAxis, scaleX, scaleY, scaleZ, scene, style, translateX, translateY, translateZ, visible

Field Summary
- Fields inherited from class javafx.scene.layout.Region
  USE_COMPUTED_SIZE, USE_PREF_SIZE

Constructor Summary

Constructors
Constructor and Description
`TilePane()` Creates a horizontal TilePane layout with prefColumn = 5 and hgap/vgap = 0.
`TilePane(double hgap, double vgap)` Creates a horizontal TilePane layout with prefColumn = 5 and the specified hgap/vgap.
`TilePane(Orientation orientation)` Creates a TilePane layout with the specified orientation, prefColumn/prefRows = 5 and hgap/vgap = 0.
`TilePane(Orientation orientation, double hgap, double vgap)` Creates a TilePane layout with the specified orientation, hgap/vgap, and prefRows/prefColumns = 5.

Method Summary

Methods
Modifier and Type	Method and Description
`ObjectProperty<Pos>`	`alignmentProperty()` The overall alignment of the tilepane's content within its width and height.
`static void`	`clearConstraints(Node child)` Removes all tilepane constraints from the child node.
`protected double`	`computeMinHeight(double width)` Computes the minimum height of this region.
`protected double`	`computeMinWidth(double height)` Computes the minimum width of this region.
`protected double`	`computePrefHeight(double forWidth)` Computes the preferred height of this region for the given width; Region subclasses should override this method to return an appropriate value based on their content and layout strategy.
`protected double`	`computePrefWidth(double forHeight)` Computes the preferred width of this region for the given height.
`Pos`	`getAlignment()` Gets the value of the property alignment.
`static Pos`	`getAlignment(Node node)` Returns the child's alignment constraint if set.
`Orientation`	`getContentBias()` Returns the orientation of a node's resizing bias for layout purposes.
`double`	`getHgap()` Gets the value of the property hgap.
`static Insets`	`getMargin(Node node)` Returns the child's margin constraint if set.
`Orientation`	`getOrientation()` Gets the value of the property orientation.
`int`	`getPrefColumns()` Gets the value of the property prefColumns.
`int`	`getPrefRows()` Gets the value of the property prefRows.
`double`	`getPrefTileHeight()` Gets the value of the property prefTileHeight.
`double`	`getPrefTileWidth()` Gets the value of the property prefTileWidth.
`Pos`	`getTileAlignment()` Gets the value of the property tileAlignment.
`double`	`getTileHeight()` Gets the value of the property tileHeight.
`double`	`getTileWidth()` Gets the value of the property tileWidth.
`double`	`getVgap()` Gets the value of the property vgap.
`DoubleProperty`	`hgapProperty()` The amount of horizontal space between each tile in a row.
`protected void`	`layoutChildren()` Invoked during the layout pass to layout the children in this `Parent`.
`ObjectProperty<Orientation>`	`orientationProperty()` The orientation of this tilepane.
`IntegerProperty`	`prefColumnsProperty()` The preferred number of columns for a horizontal tilepane.
`IntegerProperty`	`prefRowsProperty()` The preferred number of rows for a vertical tilepane.
`DoubleProperty`	`prefTileHeightProperty()` The preferred height of each tile.
`DoubleProperty`	`prefTileWidthProperty()` The preferred width of each tile.
`void`	`requestLayout()` Requests a layout pass to be performed before the next scene is rendered.
`static void`	`setAlignment(Node node, Pos value)` Sets the alignment for the child when contained by a tilepane.
`void`	`setAlignment(Pos value)` Sets the value of the property alignment.
`void`	`setHgap(double value)` Sets the value of the property hgap.
`static void`	`setMargin(Node node, Insets value)` Sets the margin for the child when contained by a tilepane.
`void`	`setOrientation(Orientation value)` Sets the value of the property orientation.
`void`	`setPrefColumns(int value)` Sets the value of the property prefColumns.
`void`	`setPrefRows(int value)` Sets the value of the property prefRows.
`void`	`setPrefTileHeight(double value)` Sets the value of the property prefTileHeight.
`void`	`setPrefTileWidth(double value)` Sets the value of the property prefTileWidth.
`void`	`setTileAlignment(Pos value)` Sets the value of the property tileAlignment.
`void`	`setVgap(double value)` Sets the value of the property vgap.
`ObjectProperty<Pos>`	`tileAlignmentProperty()` The default alignment of each child within its tile.
`ReadOnlyDoubleProperty`	`tileHeightProperty()` The actual height of each tile.
`ReadOnlyDoubleProperty`	`tileWidthProperty()` The actual width of each tile.
`DoubleProperty`	`vgapProperty()` The amount of vertical space between each tile in a column.

Methods inherited from class javafx.scene.layout.Pane
getChildren

Methods inherited from class javafx.scene.Parent
getBaselineOffset, getChildrenUnmodifiable, getManagedChildren, getStylesheets, isNeedsLayout, layout, lookup, needsLayoutProperty, setNeedsLayout

Methods inherited from class javafx.scene.Node
addEventFilter, addEventHandler, autosize, blendModeProperty, boundsInLocalProperty, boundsInParentProperty, buildEventDispatchChain, cacheHintProperty, cacheProperty, clipProperty, contains, contains, cursorProperty, depthTestProperty, disabledProperty, disableProperty, effectProperty, eventDispatcherProperty, fireEvent, focusedProperty, focusTraversableProperty, getBlendMode, getBoundsInLocal, getBoundsInParent, getCacheHint, getClip, getCursor, getDepthTest, getEffect, getEventDispatcher, getId, getInputMethodRequests, getLayoutBounds, getLayoutX, getLayoutY, getLocalToParentTransform, getLocalToSceneTransform, getOnContextMenuRequested, getOnDragDetected, getOnDragDone, getOnDragDropped, getOnDragEntered, getOnDragExited, getOnDragOver, getOnInputMethodTextChanged, getOnKeyPressed, getOnKeyReleased, getOnKeyTyped, getOnMouseClicked, getOnMouseDragEntered, getOnMouseDragExited, getOnMouseDragged, getOnMouseDragOver, getOnMouseDragReleased, getOnMouseEntered, getOnMouseExited, getOnMouseMoved, getOnMousePressed, getOnMouseReleased, getOnRotate, getOnRotationFinished, getOnRotationStarted, getOnScroll, getOnScrollFinished, getOnScrollStarted, getOnSwipeDown, getOnSwipeLeft, getOnSwipeRight, getOnSwipeUp, getOnTouchMoved, getOnTouchPressed, getOnTouchReleased, getOnTouchStationary, getOnZoom, getOnZoomFinished, getOnZoomStarted, getOpacity, getParent, getProperties, getRotate, getRotationAxis, getScaleX, getScaleY, getScaleZ, getScene, getStyle, getStyleClass, getTransforms, getTranslateX, getTranslateY, getTranslateZ, getUserData, hasProperties, hoverProperty, idProperty, inputMethodRequestsProperty, intersects, intersects, isCache, isDisable, isDisabled, isFocused, isFocusTraversable, isHover, isManaged, isMouseTransparent, isPickOnBounds, isPressed, isVisible, layoutBoundsProperty, layoutXProperty, layoutYProperty, localToParent, localToParent, localToParent, localToParentTransformProperty, localToScene, localToScene, localToScene, localToSceneTransformProperty, lookupAll, managedProperty, mouseTransparentProperty, onContextMenuRequestedProperty, onDragDetectedProperty, onDragDoneProperty, onDragDroppedProperty, onDragEnteredProperty, onDragExitedProperty, onDragOverProperty, onInputMethodTextChangedProperty, onKeyPressedProperty, onKeyReleasedProperty, onKeyTypedProperty, onMouseClickedProperty, onMouseDragEnteredProperty, onMouseDragExitedProperty, onMouseDraggedProperty, onMouseDragOverProperty, onMouseDragReleasedProperty, onMouseEnteredProperty, onMouseExitedProperty, onMouseMovedProperty, onMousePressedProperty, onMouseReleasedProperty, onRotateProperty, onRotationFinishedProperty, onRotationStartedProperty, onScrollFinishedProperty, onScrollProperty, onScrollStartedProperty, onSwipeDownProperty, onSwipeLeftProperty, onSwipeRightProperty, onSwipeUpProperty, onTouchMovedProperty, onTouchPressedProperty, onTouchReleasedProperty, onTouchStationaryProperty, onZoomFinishedProperty, onZoomProperty, onZoomStartedProperty, opacityProperty, parentProperty, parentToLocal, parentToLocal, parentToLocal, pickOnBoundsProperty, pressedProperty, relocate, removeEventFilter, removeEventHandler, requestFocus, resizeRelocate, rotateProperty, rotationAxisProperty, scaleXProperty, scaleYProperty, scaleZProperty, sceneProperty, sceneToLocal, sceneToLocal, sceneToLocal, setBlendMode, setCache, setCacheHint, setClip, setCursor, setDepthTest, setDisable, setDisabled, setEffect, setEventDispatcher, setEventHandler, setFocused, setFocusTraversable, setHover, setId, setInputMethodRequests, setLayoutX, setLayoutY, setManaged, setMouseTransparent, setOnContextMenuRequested, setOnDragDetected, setOnDragDone, setOnDragDropped, setOnDragEntered, setOnDragExited, setOnDragOver, setOnInputMethodTextChanged, setOnKeyPressed, setOnKeyReleased, setOnKeyTyped, setOnMouseClicked, setOnMouseDragEntered, setOnMouseDragExited, setOnMouseDragged, setOnMouseDragOver, setOnMouseDragReleased, setOnMouseEntered, setOnMouseExited, setOnMouseMoved, setOnMousePressed, setOnMouseReleased, setOnRotate, setOnRotationFinished, setOnRotationStarted, setOnScroll, setOnScrollFinished, setOnScrollStarted, setOnSwipeDown, setOnSwipeLeft, setOnSwipeRight, setOnSwipeUp, setOnTouchMoved, setOnTouchPressed, setOnTouchReleased, setOnTouchStationary, setOnZoom, setOnZoomFinished, setOnZoomStarted, setOpacity, setPickOnBounds, setPressed, setRotate, setRotationAxis, setScaleX, setScaleY, setScaleZ, setStyle, setTranslateX, setTranslateY, setTranslateZ, setUserData, setVisible, snapshot, snapshot, startDragAndDrop, startFullDrag, styleProperty, toBack, toFront, toString, translateXProperty, translateYProperty, translateZProperty, visibleProperty

Methods inherited from class java.lang.Object
clone, equals, finalize, getClass, hashCode, notify, notifyAll, wait, wait, wait

- Property Detail
  - orientation
```
public final ObjectProperty<Orientation> orientationProperty
```
    The orientation of this tilepane. A horizontal tilepane lays out children in tiles, left to right, wrapping tiles at the tilepane's width boundary. A vertical tilepane lays out children in tiles, top to bottom, wrapping at the tilepane's height. The default is horizontal.
    
    See Also:
    getOrientation(), setOrientation(Orientation)
  - prefRows
```
public final IntegerProperty prefRowsProperty
```
    The preferred number of rows for a vertical tilepane. This value is used only to compute the preferred size of the tilepane and may not reflect the actual number of rows, which may change if the tilepane is resized to something other than its preferred height. This property is ignored for a horizontal tilepane.
    It is recommended that the application initialize this value for a vertical tilepane.
    
    See Also:
    getPrefRows(), setPrefRows(int)
  - prefColumns
```
public final IntegerProperty prefColumnsProperty
```
    The preferred number of columns for a horizontal tilepane. This value is used only to compute the preferred size of the tilepane and may not reflect the actual number of rows, which may change if the tilepane is resized to something other than its preferred height. This property is ignored for a vertical tilepane.
    It is recommended that the application initialize this value for a horizontal tilepane.
    
    See Also:
    getPrefColumns(), setPrefColumns(int)
  - prefTileWidth
```
public final DoubleProperty prefTileWidthProperty
```
    The preferred width of each tile. If equal to USE_COMPUTED_SIZE (the default) the tile width wlll be automatically recomputed by the tilepane when the preferred size of children changes to accommodate the widest child. If the application sets this property to value greater than 0, then tiles will be set to that width and the tilepane will attempt to resize children to fit within that width (if they are resizable and their min-max width range allows it).
    
    See Also:
    getPrefTileWidth(), setPrefTileWidth(double)
  - prefTileHeight
```
public final DoubleProperty prefTileHeightProperty
```
    The preferred height of each tile. If equal to USE_COMPUTED_SIZE (the default) the tile height wlll be automatically recomputed by the tilepane when the preferred size of children changes to accommodate the tallest child. If the application sets this property to value greater than 0, then tiles will be set to that height and the tilepane will attempt to resize children to fit within that height (if they are resizable and their min-max height range allows it).
    
    See Also:
    getPrefTileHeight(), setPrefTileHeight(double)
  - tileWidth
```
public final ReadOnlyDoubleProperty tileWidthProperty
```
    The actual width of each tile. This property is read-only.
    
    See Also:
    getTileWidth()
  - tileHeight
```
public final ReadOnlyDoubleProperty tileHeightProperty
```
    The actual height of each tile. This property is read-only.
    
    See Also:
    getTileHeight()
  - hgap
```
public final DoubleProperty hgapProperty
```
    The amount of horizontal space between each tile in a row.
    
    See Also:
    getHgap(), setHgap(double)
  - vgap
```
public final DoubleProperty vgapProperty
```
    The amount of vertical space between each tile in a column.
    
    See Also:
    getVgap(), setVgap(double)
  - alignment
```
public final ObjectProperty<Pos> alignmentProperty
```
    The overall alignment of the tilepane's content within its width and height.
    For a horizontal tilepane, each row will be aligned within the tilepane's width using the alignment's hpos value, and the rows will be aligned within the tilepane's height using the alignment's vpos value.
    For a vertical tilepane, each column will be aligned within the tilepane's height using the alignment's vpos value, and the columns will be aligned within the tilepane's width using the alignment's hpos value.
    
    See Also:
    getAlignment(), setAlignment(Pos)
  - tileAlignment
```
public final ObjectProperty<Pos> tileAlignmentProperty
```
    The default alignment of each child within its tile. This may be overridden on individual children by setting the child's alignment constraint.
    
    See Also:
    getTileAlignment(), setTileAlignment(Pos)
- Constructor Detail
  - TilePane
```
public TilePane()
```
    Creates a horizontal TilePane layout with prefColumn = 5 and hgap/vgap = 0.
  - TilePane
```
public TilePane(Orientation orientation)
```
    Creates a TilePane layout with the specified orientation, prefColumn/prefRows = 5 and hgap/vgap = 0.
    
    Parameters:
    orientation - the direction the tiles should flow & wrap
  - TilePane
```
public TilePane(double hgap,
        double vgap)
```
    Creates a horizontal TilePane layout with prefColumn = 5 and the specified hgap/vgap.
    
    Parameters:
    hgap - the amount of horizontal space between each tile
    vgap - the amount of vertical space between each tile
  - TilePane
```
public TilePane(Orientation orientation,
        double hgap,
        double vgap)
```
    Creates a TilePane layout with the specified orientation, hgap/vgap, and prefRows/prefColumns = 5.
    
    Parameters:
    orientation - the direction the tiles should flow & wrap
    hgap - the amount of horizontal space between each tile
    vgap - the amount of vertical space between each tile
- Method Detail
  - setAlignment
```
public static void setAlignment(Node node,
                Pos value)
```
    Sets the alignment for the child when contained by a tilepane. If set, will override the tilepane's default alignment for children within their 'tiles'. Setting the value to null will remove the constraint.
    
    Parameters:
    node - the child node of a tilepane
    value - the alignment position for the child
  - getAlignment
```
public static Pos getAlignment(Node node)
```
    Returns the child's alignment constraint if set.
    
    Parameters:
    node - the child node of a tilepane
    
    Returns:
    the alignment position for the child or null if no alignment was set
  - setMargin
```
public static void setMargin(Node node,
             Insets value)
```
    Sets the margin for the child when contained by a tilepane. If set, the tilepane will layout the child with the margin space around it. Setting the value to null will remove the constraint.
    
    Parameters:
    node - the child node of a tilepane
    value - the margin of space around the child
  - getMargin
```
public static Insets getMargin(Node node)
```
    Returns the child's margin constraint if set.
    
    Parameters:
    node - the child node of a tilepane
    
    Returns:
    the margin for the child or null if no margin was set
  - clearConstraints
```
public static void clearConstraints(Node child)
```
    Removes all tilepane constraints from the child node.
    
    Parameters:
    child - the child node
  - orientationProperty
```
public final ObjectProperty<Orientation> orientationProperty()
```
    The orientation of this tilepane. A horizontal tilepane lays out children in tiles, left to right, wrapping tiles at the tilepane's width boundary. A vertical tilepane lays out children in tiles, top to bottom, wrapping at the tilepane's height. The default is horizontal.
    
    See Also:
    getOrientation(), setOrientation(Orientation)
  - setOrientation
```
public final void setOrientation(Orientation value)
```
    Sets the value of the property orientation.
    
    Property description:
    
    The orientation of this tilepane. A horizontal tilepane lays out children in tiles, left to right, wrapping tiles at the tilepane's width boundary. A vertical tilepane lays out children in tiles, top to bottom, wrapping at the tilepane's height. The default is horizontal.
  - getOrientation
```
public final Orientation getOrientation()
```
    Gets the value of the property orientation.
    
    Property description:
    
    The orientation of this tilepane. A horizontal tilepane lays out children in tiles, left to right, wrapping tiles at the tilepane's width boundary. A vertical tilepane lays out children in tiles, top to bottom, wrapping at the tilepane's height. The default is horizontal.
  - prefRowsProperty
```
public final IntegerProperty prefRowsProperty()
```
    The preferred number of rows for a vertical tilepane. This value is used only to compute the preferred size of the tilepane and may not reflect the actual number of rows, which may change if the tilepane is resized to something other than its preferred height. This property is ignored for a horizontal tilepane.
    It is recommended that the application initialize this value for a vertical tilepane.
    
    See Also:
    getPrefRows(), setPrefRows(int)
  - setPrefRows
```
public final void setPrefRows(int value)
```
    Sets the value of the property prefRows.
    
    Property description:
    
    The preferred number of rows for a vertical tilepane. This value is used only to compute the preferred size of the tilepane and may not reflect the actual number of rows, which may change if the tilepane is resized to something other than its preferred height. This property is ignored for a horizontal tilepane.
    It is recommended that the application initialize this value for a vertical tilepane.
  - getPrefRows
```
public final int getPrefRows()
```
    Gets the value of the property prefRows.
    
    Property description:
    
    The preferred number of rows for a vertical tilepane. This value is used only to compute the preferred size of the tilepane and may not reflect the actual number of rows, which may change if the tilepane is resized to something other than its preferred height. This property is ignored for a horizontal tilepane.
    It is recommended that the application initialize this value for a vertical tilepane.
  - prefColumnsProperty
```
public final IntegerProperty prefColumnsProperty()
```
    The preferred number of columns for a horizontal tilepane. This value is used only to compute the preferred size of the tilepane and may not reflect the actual number of rows, which may change if the tilepane is resized to something other than its preferred height. This property is ignored for a vertical tilepane.
    It is recommended that the application initialize this value for a horizontal tilepane.
    
    See Also:
    getPrefColumns(), setPrefColumns(int)
  - setPrefColumns
```
public final void setPrefColumns(int value)
```
    Sets the value of the property prefColumns.
    
    Property description:
    
    The preferred number of columns for a horizontal tilepane. This value is used only to compute the preferred size of the tilepane and may not reflect the actual number of rows, which may change if the tilepane is resized to something other than its preferred height. This property is ignored for a vertical tilepane.
    It is recommended that the application initialize this value for a horizontal tilepane.
  - getPrefColumns
```
public final int getPrefColumns()
```
    Gets the value of the property prefColumns.
    
    Property description:
    
    The preferred number of columns for a horizontal tilepane. This value is used only to compute the preferred size of the tilepane and may not reflect the actual number of rows, which may change if the tilepane is resized to something other than its preferred height. This property is ignored for a vertical tilepane.
    It is recommended that the application initialize this value for a horizontal tilepane.
  - prefTileWidthProperty
```
public final DoubleProperty prefTileWidthProperty()
```
    The preferred width of each tile. If equal to USE_COMPUTED_SIZE (the default) the tile width wlll be automatically recomputed by the tilepane when the preferred size of children changes to accommodate the widest child. If the application sets this property to value greater than 0, then tiles will be set to that width and the tilepane will attempt to resize children to fit within that width (if they are resizable and their min-max width range allows it).
    
    See Also:
    getPrefTileWidth(), setPrefTileWidth(double)
  - setPrefTileWidth
```
public final void setPrefTileWidth(double value)
```
    Sets the value of the property prefTileWidth.
    
    Property description:
    
    The preferred width of each tile. If equal to USE_COMPUTED_SIZE (the default) the tile width wlll be automatically recomputed by the tilepane when the preferred size of children changes to accommodate the widest child. If the application sets this property to value greater than 0, then tiles will be set to that width and the tilepane will attempt to resize children to fit within that width (if they are resizable and their min-max width range allows it).
  - getPrefTileWidth
```
public final double getPrefTileWidth()
```
    Gets the value of the property prefTileWidth.
    
    Property description:
    
    The preferred width of each tile. If equal to USE_COMPUTED_SIZE (the default) the tile width wlll be automatically recomputed by the tilepane when the preferred size of children changes to accommodate the widest child. If the application sets this property to value greater than 0, then tiles will be set to that width and the tilepane will attempt to resize children to fit within that width (if they are resizable and their min-max width range allows it).
  - prefTileHeightProperty
```
public final DoubleProperty prefTileHeightProperty()
```
    The preferred height of each tile. If equal to USE_COMPUTED_SIZE (the default) the tile height wlll be automatically recomputed by the tilepane when the preferred size of children changes to accommodate the tallest child. If the application sets this property to value greater than 0, then tiles will be set to that height and the tilepane will attempt to resize children to fit within that height (if they are resizable and their min-max height range allows it).
    
    See Also:
    getPrefTileHeight(), setPrefTileHeight(double)
  - setPrefTileHeight
```
public final void setPrefTileHeight(double value)
```
    Sets the value of the property prefTileHeight.
    
    Property description:
    
    The preferred height of each tile. If equal to USE_COMPUTED_SIZE (the default) the tile height wlll be automatically recomputed by the tilepane when the preferred size of children changes to accommodate the tallest child. If the application sets this property to value greater than 0, then tiles will be set to that height and the tilepane will attempt to resize children to fit within that height (if they are resizable and their min-max height range allows it).
  - getPrefTileHeight
```
public final double getPrefTileHeight()
```
    Gets the value of the property prefTileHeight.
    
    Property description:
    
    The preferred height of each tile. If equal to USE_COMPUTED_SIZE (the default) the tile height wlll be automatically recomputed by the tilepane when the preferred size of children changes to accommodate the tallest child. If the application sets this property to value greater than 0, then tiles will be set to that height and the tilepane will attempt to resize children to fit within that height (if they are resizable and their min-max height range allows it).
  - tileWidthProperty
```
public final ReadOnlyDoubleProperty tileWidthProperty()
```
    The actual width of each tile. This property is read-only.
    
    See Also:
    getTileWidth()
  - getTileWidth
```
public final double getTileWidth()
```
    Gets the value of the property tileWidth.
    
    Property description:
    
    The actual width of each tile. This property is read-only.
  - tileHeightProperty
```
public final ReadOnlyDoubleProperty tileHeightProperty()
```
    The actual height of each tile. This property is read-only.
    
    See Also:
    getTileHeight()
  - getTileHeight
```
public final double getTileHeight()
```
    Gets the value of the property tileHeight.
    
    Property description:
    
    The actual height of each tile. This property is read-only.
  - hgapProperty
```
public final DoubleProperty hgapProperty()
```
    The amount of horizontal space between each tile in a row.
    
    See Also:
    getHgap(), setHgap(double)
  - setHgap
```
public final void setHgap(double value)
```
    Sets the value of the property hgap.
    
    Property description:
    
    The amount of horizontal space between each tile in a row.
  - getHgap
```
public final double getHgap()
```
    Gets the value of the property hgap.
    
    Property description:
    
    The amount of horizontal space between each tile in a row.
  - vgapProperty
```
public final DoubleProperty vgapProperty()
```
    The amount of vertical space between each tile in a column.
    
    See Also:
    getVgap(), setVgap(double)
  - setVgap
```
public final void setVgap(double value)
```
    Sets the value of the property vgap.
    
    Property description:
    
    The amount of vertical space between each tile in a column.
  - getVgap
```
public final double getVgap()
```
    Gets the value of the property vgap.
    
    Property description:
    
    The amount of vertical space between each tile in a column.
  - alignmentProperty
```
public final ObjectProperty<Pos> alignmentProperty()
```
    The overall alignment of the tilepane's content within its width and height.
    For a horizontal tilepane, each row will be aligned within the tilepane's width using the alignment's hpos value, and the rows will be aligned within the tilepane's height using the alignment's vpos value.
    For a vertical tilepane, each column will be aligned within the tilepane's height using the alignment's vpos value, and the columns will be aligned within the tilepane's width using the alignment's hpos value.
    
    See Also:
    getAlignment(), setAlignment(Pos)
  - setAlignment
```
public final void setAlignment(Pos value)
```
    Sets the value of the property alignment.
    
    Property description:
    
    The overall alignment of the tilepane's content within its width and height.
    For a horizontal tilepane, each row will be aligned within the tilepane's width using the alignment's hpos value, and the rows will be aligned within the tilepane's height using the alignment's vpos value.
    For a vertical tilepane, each column will be aligned within the tilepane's height using the alignment's vpos value, and the columns will be aligned within the tilepane's width using the alignment's hpos value.
  - getAlignment
```
public final Pos getAlignment()
```
    Gets the value of the property alignment.
    
    Property description:
    
    The overall alignment of the tilepane's content within its width and height.
    For a horizontal tilepane, each row will be aligned within the tilepane's width using the alignment's hpos value, and the rows will be aligned within the tilepane's height using the alignment's vpos value.
    For a vertical tilepane, each column will be aligned within the tilepane's height using the alignment's vpos value, and the columns will be aligned within the tilepane's width using the alignment's hpos value.
  - tileAlignmentProperty
```
public final ObjectProperty<Pos> tileAlignmentProperty()
```
    The default alignment of each child within its tile. This may be overridden on individual children by setting the child's alignment constraint.
    
    See Also:
    getTileAlignment(), setTileAlignment(Pos)
  - setTileAlignment
```
public final void setTileAlignment(Pos value)
```
    Sets the value of the property tileAlignment.
    
    Property description:
    
    The default alignment of each child within its tile. This may be overridden on individual children by setting the child's alignment constraint.
  - getTileAlignment
```
public final Pos getTileAlignment()
```
    Gets the value of the property tileAlignment.
    
    Property description:
    
    The default alignment of each child within its tile. This may be overridden on individual children by setting the child's alignment constraint.
  - getContentBias
```
public Orientation getContentBias()
```
    Description copied from class: Node
    
    Returns the orientation of a node's resizing bias for layout purposes. If the node type has no bias, returns null. If the node is resizable and it's height depends on its width, returns HORIZONTAL, else if its width depends on its height, returns VERTICAL.
    Resizable subclasses should override this method to return an appropriate value.
    
    Overrides:
    
    getContentBias in class Node
    
    Returns:
    orientation of width/height dependency or null if there is none
    See Also:
    Node.isResizable(), Node.minWidth(double), Node.minHeight(double), Node.prefWidth(double), Node.prefHeight(double), Node.maxWidth(double), Node.maxHeight(double)
  - requestLayout
```
public void requestLayout()
```
    Description copied from class: Parent
    
    Requests a layout pass to be performed before the next scene is rendered. This is batched up asynchronously to happen once per "pulse", or frame of animation.
    If this parent is either a layout root or unmanaged, then it will be added directly to the scene's dirty layout list, otherwise requestLayout will be invoked on its parent.
    
    Overrides:
    
    requestLayout in class Parent
  - computeMinWidth
```
protected double computeMinWidth(double height)
```
    Description copied from class: Region
    
    Computes the minimum width of this region. Returns the sum of the left and right insets by default. region subclasses should override this method to return an appropriate value based on their content and layout strategy. If the subclass doesn't have a VERTICAL content bias, then the height parameter can be ignored.
    
    Overrides:
    
    computeMinWidth in class Region
    
    Parameters:
    height - the height that should be used if min width depends on it
    
    Returns:
    the computed minimum width of this region
  - computeMinHeight
```
protected double computeMinHeight(double width)
```
    Description copied from class: Region
    
    Computes the minimum height of this region. Returns the sum of the top and bottom insets by default. Region subclasses should override this method to return an appropriate value based on their content and layout strategy. If the subclass doesn't have a HORIZONTAL content bias, then the width parameter can be ignored.
    
    Overrides:
    
    computeMinHeight in class Region
    
    Parameters:
    width - the width that should be used if min height depends on it
    
    Returns:
    the computed minimum height for this region
  - computePrefWidth
```
protected double computePrefWidth(double forHeight)
```
    Description copied from class: Region
    
    Computes the preferred width of this region for the given height. Region subclasses should override this method to return an appropriate value based on their content and layout strategy. If the subclass doesn't have a VERTICAL content bias, then the height parameter can be ignored.
    
    Overrides:
    
    computePrefWidth in class Region
    
    Parameters:
    forHeight - the height that should be used if preferred width depends on it
    
    Returns:
    the computed preferred width for this region
  - computePrefHeight
```
protected double computePrefHeight(double forWidth)
```
    Description copied from class: Region
    
    Computes the preferred height of this region for the given width; Region subclasses should override this method to return an appropriate value based on their content and layout strategy. If the subclass doesn't have a HORIZONTAL content bias, then the width parameter can be ignored.
    
    Overrides:
    
    computePrefHeight in class Region
    
    Parameters:
    forWidth - the width that should be used if preferred height depends on it
    
    Returns:
    the computed preferred height for this region
  - layoutChildren
```
protected void layoutChildren()
```
    Description copied from class: Parent
    
    Invoked during the layout pass to layout the children in this Parent. By default it will only set the size of managed, resizable content to their preferred sizes and does not do any node positioning.
    Subclasses should override this function to layout content as needed.
    
    Overrides:
    
    layoutChildren in class Parent

Class TilePane

Resizable Range

Optional Layout Constraints

Property Summary

Properties inherited from class javafx.scene.layout.Region

Properties inherited from class javafx.scene.Parent

Properties inherited from class javafx.scene.Node

Field Summary

Fields inherited from class javafx.scene.layout.Region

Constructor Summary

Method Summary

Methods inherited from class javafx.scene.layout.Pane

Methods inherited from class javafx.scene.layout.Region

Methods inherited from class javafx.scene.Parent

Methods inherited from class javafx.scene.Node

Methods inherited from class java.lang.Object

Property Detail

orientation

prefRows

prefColumns

prefTileWidth

prefTileHeight

tileWidth

tileHeight

hgap

vgap

alignment

tileAlignment

Constructor Detail

TilePane

TilePane

TilePane

TilePane

Method Detail

setAlignment

getAlignment

setMargin

getMargin

clearConstraints

orientationProperty

setOrientation

getOrientation

prefRowsProperty

setPrefRows

getPrefRows

prefColumnsProperty

setPrefColumns

getPrefColumns

prefTileWidthProperty

setPrefTileWidth

getPrefTileWidth

prefTileHeightProperty

setPrefTileHeight

getPrefTileHeight

tileWidthProperty

getTileWidth

tileHeightProperty

getTileHeight

hgapProperty

setHgap

getHgap

vgapProperty

setVgap

getVgap

alignmentProperty

setAlignment

getAlignment

tileAlignmentProperty

setTileAlignment

getTileAlignment

getContentBias

requestLayout

computeMinWidth

computeMinHeight

computePrefWidth

computePrefHeight

layoutChildren