|
|
Эта страница руководства для версии 10.9 Mac OS XЕсли Вы выполняете различную версию Mac OS X, просматриваете документацию локально:
Читать страницы руководстваСтраницы руководства предназначаются как справочник для людей, уже понимающих технологию.
|
CHMOD(1) BSD General Commands Manual CHMOD(1)
NAME
chmod -- change file modes or Access Control Lists
SYNOPSIS
chmod [-fv] [-R [-H | -L | -P]] mode file ...
chmod [-fv] [-R [-H | -L | -P]] [-a | +a | =a] ACE file ...
chmod [-fhv] [-R [-H | -L | -P]] [-E] file ...
chmod [-fhv] [-R [-H | -L | -P]] [-C] file ...
chmod [-fhv] [-R [-H | -L | -P]] [-N] file ...
DESCRIPTION
The chmod utility modifies the file mode bits of the listed files as specified by the mode operand. It
may also be used to modify the Access Control Lists (ACLs) associated with the listed files.
The generic options are as follows:
-f Do not display a diagnostic message if chmod could not modify the mode for file.
-H If the -R option is specified, symbolic links on the command line are followed. (Symbolic
links encountered in the tree traversal are not followed by default.)
-h If the file is a symbolic link, change the mode of the link itself rather than the file that
the link points to.
-L If the -R option is specified, all symbolic links are followed.
-P If the -R option is specified, no symbolic links are followed. This is the default.
-R Change the modes of the file hierarchies rooted in the files instead of just the files them-selves. themselves.
selves.
-v Cause chmod to be verbose, showing filenames as the mode is modified. If the -v flag is speci-fied specified
fied more than once, the old and new modes of the file will also be printed, in both octal and
symbolic notation.
The -H, -L and -P options are ignored unless the -R option is specified. In addition, these options
override each other and the command's actions are determined by the last one specified.
Only the owner of a file or the super-user is permitted to change the mode of a file.
DIAGNOSTICS
The chmod utility exits 0 on success, and >0 if an error occurs.
MODES
Modes may be absolute or symbolic. An absolute mode is an octal number constructed from the sum of one
or more of the following values:
4000 (the set-user-ID-on-execution bit) Executable files with this bit set will run with
effective uid set to the uid of the file owner. Directories with the set-user-id bit set
will force all files and sub-directories created in them to be owned by the directory
owner and not by the uid of the creating process, if the underlying file system supports
this feature: see chmod(2) and the suiddir option to mount(8).
2000 (the set-group-ID-on-execution bit) Executable files with this bit set will run with
effective gid set to the gid of the file owner.
1000 (the sticky bit) See chmod(2) and sticky(8).
0400 Allow read by owner.
0200 Allow write by owner.
0100 For files, allow execution by owner. For directories, allow the owner to search in the
directory.
0040 Allow read by group members.
0020 Allow write by group members.
0010 For files, allow execution by group members. For directories, allow group members to
search in the directory.
0004 Allow read by others.
0002 Allow write by others.
0001 For files, allow execution by others. For directories allow others to search in the
directory.
For example, the absolute mode that permits read, write and execute by the owner, read and execute by
group members, read and execute by others, and no set-uid or set-gid behaviour is 755
(400+200+100+040+010+004+001).
The symbolic mode is described by the following grammar:
mode ::= clause [, clause ...]
clause ::= [who ...] [action ...] action
action ::= op [perm ...]
who ::= a | u | g | o
op ::= + | - | =
perm ::= r | s | t | w | x | X | u | g | o
The who symbols ``u'', ``g'', and ``o'' specify the user, group, and other parts of the mode bits,
respectively. The who symbol ``a'' is equivalent to ``ugo''.
The perm symbols represent the portions of the mode bits as follows:
r The read bits.
s The set-user-ID-on-execution and set-group-ID-on-execution bits.
t The sticky bit.
w The write bits.
x The execute/search bits.
X The execute/search bits if the file is a directory or any of the execute/search bits are
set in the original (unmodified) mode. Operations with the perm symbol ``X'' are only
meaningful in conjunction with the op symbol ``+'', and are ignored in all other cases.
u The user permission bits in the original mode of the file.
g The group permission bits in the original mode of the file.
o The other permission bits in the original mode of the file.
The op symbols represent the operation performed, as follows:
+ If no value is supplied for perm, the ``+'' operation has no effect. If no value is supplied for
who, each permission bit specified in perm, for which the corresponding bit in the file mode cre-ation creation
ation mask is clear, is set. Otherwise, the mode bits represented by the specified who and perm
values are set.
- If no value is supplied for perm, the ``-'' operation has no effect. If no value is supplied for
who, each permission bit specified in perm, for which the corresponding bit in the file mode cre-ation creation
ation mask is clear, is cleared. Otherwise, the mode bits represented by the specified who and
perm values are cleared.
= The mode bits specified by the who value are cleared, or, if no who value is specified, the
owner, group and other mode bits are cleared. Then, if no value is supplied for who, each per-mission permission
mission bit specified in perm, for which the corresponding bit in the file mode creation mask is
clear, is set. Otherwise, the mode bits represented by the specified who and perm values are
set.
Each clause specifies one or more operations to be performed on the mode bits, and each operation is
applied to the mode bits in the order specified.
Operations upon the other permissions only (specified by the symbol ``o'' by itself), in combination
with the perm symbols ``s'' or ``t'', are ignored.
EXAMPLES OF VALID MODES
644 make a file readable by anyone and writable by the owner only.
go-w deny write permission to group and others.
=rw,+X set the read and write permissions to the usual defaults, but retain any execute permis-sions permissions
sions that are currently set.
+X make a directory or file searchable/executable by everyone if it is already search-able/executable searchable/executable
able/executable by anyone.
755
u=rwx,go=rx
u=rwx,go=u-w make a file readable/executable by everyone and writable by the owner only.
go= clear all mode bits for group and others.
g=u-w set the group bits equal to the user bits, but clear the group write bit.
ACL MANIPULATION OPTIONS
ACLs are manipulated using extensions to the symbolic mode grammar. Each file has one ACL, containing
an ordered list of entries. Each entry refers to a user or group, and grants or denies a set of per-missions. permissions.
missions. In cases where a user and a group exist with the same name, the user/group name can be pre-fixed prefixed
fixed with "user:" or "group:" in order to specify the type of name.
If the user or group name contains spaces you can use ':' as the delimiter between name and permission.
The following permissions are applicable to all filesystem objects:
delete Delete the item. Deletion may be granted by either this permission on an object or the
delete_child right on the containing directory.
readattr
Read an objects basic attributes. This is implicitly granted if the object can be looked
up and not explicitly denied.
writeattr
Write an object's basic attributes.
readextattr
Read extended attributes.
writeextattr
Write extended attributes.
readsecurity
Read an object's extended security information (ACL).
writesecurity
Write an object's security information (ownership, mode, ACL).
chown Change an object's ownership.
The following permissions are applicable to directories:
list List entries.
search Look up files by name.
add_file
Add a file.
add_subdirectory
Add a subdirectory.
delete_child
Delete a contained object. See the file delete permission above.
The following permissions are applicable to non-directory filesystem objects:
read Open for reading.
write Open for writing.
append Open for writing, but in a fashion that only allows writes into areas of the file not
previously written.
execute
Execute the file as a script or program.
ACL inheritance is controlled with the following permissions words, which may only be applied to direc-tories: directories:
tories:
file_inherit
Inherit to files.
directory_inherit
Inherit to directories.
limit_inherit
This flag is only relevant to entries inherited by subdirectories; it causes the direc-tory_inherit directory_inherit
tory_inherit flag to be cleared in the entry that is inherited, preventing further nested
subdirectories from also inheriting the entry.
only_inherit
The entry is inherited by created items but not considered when processing the ACL.
The ACL manipulation options are as follows:
+a The +a mode parses a new ACL entry from the next argument on the commandline and inserts it
into the canonical location in the ACL. If the supplied entry refers to an identity already
listed, the two entries are combined.
Examples
# ls -le
-rw-r--r--+ 1 juser wheel 0 Apr 28 14:06 file1
# chmod +a "admin allow write" file1
# ls -le
-rw-r--r--+ 1 juser wheel 0 Apr 28 14:06 file1
owner: juser
1: admin allow write
# chmod +a "guest deny read" file1
# ls -le
-rw-r--r--+ 1 juser wheel 0 Apr 28 14:06 file1
owner: juser
1: guest deny read
2: admin allow write
# chmod +a "admin allow delete" file1
# ls -le
-rw-r--r--+ 1 juser wheel 0 Apr 28 14:06 file1
owner: juser
1: guest deny read
2: admin allow write,delete
# chmod +a "User 1:allow:read" file
# ls -le
-rw-r--r--+ 1 juser wheel 0 Apr 28 14:06 file1
owner: juser
1: guest deny read
2: User 1 allow read
3: admin allow write,delete
The +a mode strives to maintain correct canonical form for the ACL.
local deny
local allow
inherited deny
inherited allow
By default, chmod adds entries to the top of the local deny and local allow lists. Inherited
entries are added by using the +ai mode.
Examples
# ls -le
-rw-r--r--+ 1 juser wheel 0 Apr 28 14:06 file1
owner: juser
1: guest deny read
2: admin allow write,delete
3: juser inherited deny delete
4: admin inherited allow delete
5: backup inherited deny read
6: admin inherited allow write-security
# chmod +ai "others allow read" file1
# ls -le
-rw-r--r--+ 1 juser wheel 0 Apr 28 14:06 file1
owner: juser
1: guest deny read
2: admin allow write,delete
3: juser inherited deny delete
4: others inherited allow read
5: admin inherited allow delete
6: backup inherited deny read
7: admin inherited allow write-security
+a# When a specific ordering is required, the exact location at which an entry will be inserted is
specified with the +a# mode.
Examples
# ls -le
-rw-r--r--+ 1 juser wheel 0 Apr 28 14:06 file1
owner: juser
1: guest deny read
2: admin allow write
# chmod +a# 2 "others deny read" file1
# ls -le
-rw-r--r--+ 1 juser wheel 0 Apr 28 14:06 file1
owner: juser
1: guest deny read
2: others deny read
3: admin allow write
The +ai# mode may be used to insert inherited entries at a specific location. Note that these
modes allow non-canonical ACL ordering to be constructed.
-a The -a mode is used to delete ACL entries. All entries exactly matching the supplied entry will
be deleted. If the entry lists a subset of rights granted by an entry, only the rights listed
are removed. Entries may also be deleted by index using the -a# mode.
Examples
# ls -le
-rw-r--r--+ 1 juser wheel 0 Apr 28 14:06 file1
owner: juser
1: guest deny read
2: admin allow write,delete
# chmod -a# 1 file1
# ls -le
-rw-r--r--+ 1 juser wheel 0 Apr 28 14:06 file1
owner: juser
1: admin allow write,delete
# chmod -a "admin allow write" file1
# ls -le
-rw-r--r--+ 1 juser wheel 0 Apr 28 14:06 file1
owner: juser
1: admin allow delete
Inheritance is not considered when processing the -a mode; rights and entries will be removed
regardless of their inherited state.
If the user or group name contains spaces you can use ':' as the delimiter
Example
# chmod +a "User 1:allow:read" file
=a# Individual entries are rewritten using the =a# mode.
Examples
# ls -le
-rw-r--r--+ 1 juser wheel 0 Apr 28 14:06 file1
owner: juser
1: admin allow delete
# chmod =a# 1 "admin allow write,chown"
# ls -le
-rw-r--r--+ 1 juser wheel 0 Apr 28 14:06 file1
owner: juser
1: admin allow write,chown
This mode may not be used to add new entries.
-E Reads the ACL information from stdin, as a sequential list of ACEs, separated by newlines. If
the information parses correctly, the existing information is replaced.
-C Returns false if any of the named files have ACLs in non-canonical order.
-i Removes the 'inherited' bit from all entries in the named file(s) ACLs.
-I Removes all inherited entries from the named file(s) ACL(s).
-N Removes the ACL from the named file(s).
COMPATIBILITY
The -v option is non-standard and its use in scripts is not recommended.
SEE ALSO
chflags(1), fsaclctl(1), install(1), chmod(2), stat(2), umask(2), fts(3), setmode(3), symlink(7),
chown(8), mount(8), sticky(8)
STANDARDS
The chmod utility is expected to be IEEE Std 1003.2 (``POSIX.2'') compatible with the exception of the
perm symbol ``t'' which is not included in that standard.
HISTORY
A chmod command appeared in Version 1 AT&T UNIX.
BSD July 08, 2004 BSD
|
Сообщение о проблемах
Способ сообщить о проблеме с этой страницей руководства зависит от типа проблемы:
- Ошибки содержания
- Ошибки отчета в содержании этой документации со ссылками на отзыв ниже.
- Отчеты об ошибках
- Сообщите об ошибках в функциональности описанного инструмента или API через Генератор отчетов Ошибки.
- Форматирование проблем
- Отчет, форматирующий ошибки в интерактивной версии этих страниц со ссылками на отзыв ниже.