13.6.7.5. SIGNAL Syntax

SIGNAL condition_value    [SET signal_information_item    [, signal_information_item] ...]condition_value:    SQLSTATE [VALUE] sqlstate_value  | condition_namesignal_information_item:    condition_information_item_name = simple_value_specificationcondition_information_item_name:    CLASS_ORIGIN  | SUBCLASS_ORIGIN  | MESSAGE_TEXT  | MYSQL_ERRNO  | CONSTRAINT_CATALOG  | CONSTRAINT_SCHEMA  | CONSTRAINT_NAME  | CATALOG_NAME  | SCHEMA_NAME  | TABLE_NAME  | COLUMN_NAME  | CURSOR_NAMEcondition_name, simple_value_specification:    (see following discussion)

SIGNAL is the way to "return" an error. SIGNAL provides error information to a handler, to an outer portion of the application, or to the client. Also, it provides control over the error's characteristics (error number, SQLSTATE value, message). Without SIGNAL, it is necessary to resort to workarounds such as deliberately referring to a nonexistent table to cause a routine to return an error.

No special privileges are required to execute the SIGNAL statement.

To retrieve information from the diagnostics area, use the GET DIAGNOSTICS statement (see Section 13.6.7.3, "GET DIAGNOSTICS Syntax"). For information about the diagnostics area, see Section 13.6.7.7, "The MySQL Diagnostics Area".

The condition_value in a SIGNAL statement indicates the error value to be returned. It can be an SQLSTATE value (a 5-character string literal) or a condition_name that refers to a named condition previously defined with DECLARE ... CONDITION (see Section 13.6.7.1, "DECLARE ... CONDITION Syntax").

An SQLSTATE value can indicate errors, warnings, or "not found." The first two characters of the value indicate its error class, as discussed in Section 13.6.7.5.1, "Signal Condition Information Items". Some signal values cause statement termination; see Section 13.6.7.5.2, "Effect of Signals on Handlers, Cursors, and Statements".

The SQLSTATE value for a SIGNAL statement should not start with '00' because such values indicate success and are not valid for signaling an error. This is true whether the SQLSTATE value is specified directly in the SIGNAL statement or in a named condition referred to in the statement. If the value is invalid, a Bad SQLSTATE error occurs.

To signal a generic SQLSTATE value, use '45000', which means "unhandled user-defined exception."

The SIGNAL statement optionally includes a SET clause that contains multiple signal items, in a comma-separated list of condition_information_item_name = simple_value_specification assignments.

Each condition_information_item_name may be specified only once in the SET clause. Otherwise, a Duplicate condition information item error occurs.

Valid simple_value_specification designators can be specified using stored procedure or function parameters, stored program local variables declared with DECLARE, user-defined variables, system variables, or literals. A character literal may include a _charset introducer.

For information about permissible condition_information_item_name values, see Section 13.6.7.5.1, "Signal Condition Information Items".

The following procedure signals an error or warning depending on the value of pval, its input parameter:

CREATE PROCEDURE p (pval INT)BEGIN  DECLARE specialty CONDITION FOR SQLSTATE '45000';  IF pval = 0 THEN    SIGNAL SQLSTATE '01000';  ELSEIF pval = 1 THEN    SIGNAL SQLSTATE '45000'      SET MESSAGE_TEXT = 'An error occurred';  ELSEIF pval = 2 THEN    SIGNAL specialty      SET MESSAGE_TEXT = 'An error occurred';  ELSE    SIGNAL SQLSTATE '01000'      SET MESSAGE_TEXT = 'A warning occurred', MYSQL_ERRNO = 1000;    SIGNAL SQLSTATE '45000'      SET MESSAGE_TEXT = 'An error occurred', MYSQL_ERRNO = 1001;  END IF;END;

If pval is 0, p() signals a warning because SQLSTATE values that begin with '01' are signals in the warning class. The warning does not terminate the procedure, and can be seen with SHOW WARNINGS after the procedure returns.

If pval is 1, p() signals an error and sets the MESSAGE_TEXT condition information item. The error terminates the procedure, and the text is returned with the error information.

If pval is 2, the same error is signaled, although the SQLSTATE value is specified using a named condition in this case.

If pval is anything else, p() first signals a warning and sets the message text and error number condition information items. This warning does not terminate the procedure, so execution continues and p() then signals an error. The error does terminate the procedure. The message text and error number set by the warning are replaced by the values set by the error, which are returned with the error information.

SIGNAL is typically used within stored programs, but it is a MySQL extension that it is permitted outside handler context. For example, if you invoke the mysql client program, you can enter any of these statements at the prompt:

mysql> SIGNAL SQLSTATE '77777';mysql> CREATE TRIGGER t_bi BEFORE INSERT ON t    -> FOR EACH ROW SIGNAL SQLSTATE '77777';mysql> CREATE EVENT e ON SCHEDULE EVERY 1 SECOND    -> DO SIGNAL SQLSTATE '77777';

SIGNAL executes according to the following rules:

If the SIGNAL statement indicates a particular SQLSTATE value, that value is used to signal the condition specified. Example:

CREATE PROCEDURE p (divisor INT)BEGIN  IF divisor = 0 THEN    SIGNAL SQLSTATE '22012';  END IF;END;

If the SIGNAL statement uses a named condition, the condition must be declared in some scope that applies to the SIGNAL statement, and must be defined using an SQLSTATE value, not a MySQL error number. Example:

CREATE PROCEDURE p (divisor INT)BEGIN  DECLARE divide_by_zero CONDITION FOR SQLSTATE '22012';  IF divisor = 0 THEN    SIGNAL divide_by_zero;  END IF;END;

If the named condition does not exist in the scope of the SIGNAL statement, an Undefined CONDITION error occurs.

If SIGNAL refers to a named condition that is defined with a MySQL error number rather than an SQLSTATE value, a SIGNAL/RESIGNAL can only use a CONDITION defined with SQLSTATE error occurs. The following statements cause that error because the named condition is associated with a MySQL error number:

DECLARE no_such_table CONDITION FOR 1051;SIGNAL no_such_table;

If a condition with a given name is declared multiple times in different scopes, the declaration with the most local scope applies. Consider the following procedure:

CREATE PROCEDURE p (divisor INT)BEGIN  DECLARE my_error CONDITION FOR SQLSTATE '45000';  IF divisor = 0 THEN    BEGIN      DECLARE my_error CONDITION FOR SQLSTATE '22012';      SIGNAL my_error;    END;  END IF;  SIGNAL my_error;END;

If divisor is 0, the first SIGNAL statement executes. The innermost my_error condition declaration applies, raising SQLSTATE '22012'.

If divisor is not 0, the second SIGNAL statement executes. The outermost my_error condition declaration applies, raising SQLSTATE '45000'.

For information about how the server chooses handlers when a condition occurs, see Section 13.6.7.6, "Scope Rules for Handlers".

Signals can be raised within exception handlers:

CREATE PROCEDURE p ()BEGIN  DECLARE EXIT HANDLER FOR SQLEXCEPTION  BEGIN    SIGNAL SQLSTATE VALUE '99999'      SET MESSAGE_TEXT = 'An error occurred';  END;  DROP TABLE no_such_table;END;

CALL p() reaches the DROP TABLE statement. There is no table named no_such_table, so the error handler is activated. The error handler destroys the original error ("no such table") and makes a new error with SQLSTATE '99999' and message An error occurred.

Item Name             Definition---------             ----------CLASS_ORIGIN          VARCHAR(64)SUBCLASS_ORIGIN       VARCHAR(64)CONSTRAINT_CATALOG    VARCHAR(64)CONSTRAINT_SCHEMA     VARCHAR(64)CONSTRAINT_NAME       VARCHAR(64)CATALOG_NAME          VARCHAR(64)SCHEMA_NAME           VARCHAR(64)TABLE_NAME            VARCHAR(64)COLUMN_NAME           VARCHAR(64)CURSOR_NAME           VARCHAR(64)MESSAGE_TEXT          VARCHAR(128)MYSQL_ERRNO           SMALLINT UNSIGNED

CLASS_ORIGIN = SUBCLASS_ORIGIN = '';CONSTRAINT_CATALOG = CONSTRAINT_SCHEMA = CONSTRAINT_NAME = '';CATALOG_NAME = SCHEMA_NAME = TABLE_NAME = COLUMN_NAME = '';CURSOR_NAME = '';

mysql> delimiter
            //mysql> CREATE FUNCTION f () RETURNS INT    -> BEGIN    ->   SIGNAL SQLSTATE
            '01234'; -- signal a warning    ->   RETURN
            5;    -> END//mysql> delimiter ;mysql> CREATE
            TABLE t (s1 INT);mysql> INSERT INTO t VALUES
            (f());